Download or read book Knowledge based Design of Lower Limb Prosthesis written by Stella Gabbiadini and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomechanics of Lower Limb Prosthetics written by Mark R. Pitkin and published by Springer. This book was released on 2009-10-14 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foreword from a Clinical Biomechanist, Applied Physiologist and Prosthetist teaching graduate students in Prosthetics & Orthotics. While there are many books on Biomechanics, arguably the quintessential science of limb prosthetics, none addresses the fundamental principles in sufficient detail and depth to be practically useful to the prosthetist, rehabilitation specialist or researcher. Dr. Pitkin’s monograph is an exemplary collection of theoretical principles from his research and o- ers, presented in its clinical and applied biomechanics form. The textbook provides an excellent overview of the many facets of lower limb prosthetic design and engineering for the ardent clinician researcher and student. The book delves into many of the basic concepts that are required knowledge for the clinician and the scientist to have as the foundation for their work. Dr. Pitkin has an e- quent manner in which he reflects on the history and literature to tell the storied evolution of prosthetic design . He takes the reader on a journey to consider his theories, which have substantive foundations to contemplate. By the end of chapter one, we have the basic h- tory and an appreciation for the rationale behind the “rolling joint ankle” with evidence to support his theoretical views.
Download or read book The Promise of Assistive Technology to Enhance Activity and Work Participation written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-09-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Census Bureau has reported that 56.7 million Americans had some type of disability in 2010, which represents 18.7 percent of the civilian noninstitutionalized population included in the 2010 Survey of Income and Program Participation. The U.S. Social Security Administration (SSA) provides disability benefits through the Social Security Disability Insurance (SSDI) program and the Supplemental Security Income (SSI) program. As of December 2015, approximately 11 million individuals were SSDI beneficiaries, and about 8 million were SSI beneficiaries. SSA currently considers assistive devices in the nonmedical and medical areas of its program guidelines. During determinations of substantial gainful activity and income eligibility for SSI benefits, the reasonable cost of items, devices, or services applicants need to enable them to work with their impairment is subtracted from eligible earnings, even if those items or services are used for activities of daily living in addition to work. In addition, SSA considers assistive devices in its medical disability determination process and assessment of work capacity. The Promise of Assistive Technology to Enhance Activity and Work Participation provides an analysis of selected assistive products and technologies, including wheeled and seated mobility devices, upper-extremity prostheses, and products and technologies selected by the committee that pertain to hearing and to communication and speech in adults.
Download or read book Lower limb Prosthetics written by Norman Berger and published by . This book was released on 1997 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Modeling and Control of an Active Prosthetic Knee written by Roozbeh Borjian and published by . This book was released on 2008 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The few microcontroller based active/semi-active prosthetic knee joints available commercially are extremely expensive and do not consider the uncertainties of inputs sensory information. Progressing in the controller of the current prosthetic devices and creating artificial lower limbs compatible with different users may lead to more effective and low-cost prostheses. This can affect the life style of lots of amputees specially the land-mine victims in developing war-torn countries who are unable to partake in the advancement of the current intelligent prosthetic knees. The purpose of the proposed Active Prosthetic Knee (APK) design is to investigate a new schema that allows the device to provide the full necessary torque at the knee joint based on echoing the state of the intact leg. This study involves the design features of the mechanical aspects, sensing system, communication, and knowledge-based controller to implement a cost-effective APK. The proposed microcontroller based prosthesis utilizes a ball screw system accompanied by a high-speed brushed servomotor to provide one degree of freedom for the fabricated prototype. Moreover, a modular test-bed is manufactured to mimic the lower limb motion which contributes investigating different controllers for the prototype. Thus, the test bed allows assessing the primary performance of the APK before testing on a human subject.
Download or read book Active Above Knee Prosthesis written by Zlata Jelacic and published by Academic Press. This book was released on 2020-06-16 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Active Above-Knee Prosthesis: A Guide to a Smart Prosthetic Leg presents original research and development results, providing a firsthand overview of idea generation and prototype production. The book gives insights into the problem of stair ascent for people with above-knee amputation and offers a solution in the form of a physical prototype of an active above-knee prosthesis with an actuated ankle. The book's authors have developed and tested a physical prototype of an active above-knee prosthesis, giving anyone who is researching and designing prosthetic devices firsthand knowledge on how to build on, and continue with, work that has already been done. - Presents state-of-the-art technology in powered prosthetics - Helps readers evaluate design options and create new developments - Provides guidance on the evolution of advanced prosthetic design
Download or read book Design and Manufacturing Process Optimization for Prosthesis of the Lower Limb written by Abbass Ballit and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The prosthetic socket, an essential interface element between the patient's stump and prosthetic device, is most often the place where the degree of prosthetic success is defined. It is the most critical part of the prosthesis, customized to fit with the unique residual limb of the amputee. Without a proper socket shape and fit, the prosthesis becomes uncomfortable, or even unusable, and causes pain and skin issues. The state-of-the-art prosthetic production is still missing universal numerical standards to design a socket. The current practice is expensive and relies on the manual refinements of the orthopedic technician, and the fit quality strictly correlates with his skills as well as the subjective feedback of the patient. The thesis aims to conduct a deep analysis of an optimal design of the prosthetic socket by studying and developing an alternative computer-aided design process. This process is fully based on the virtual model of the patient's residual limb and relies on the calculation of the socket-stump interaction. A fast calculation is favorable in this case, that's why we propose to use the Mass-Spring System (MSS) instead of the widely used FE method to model the soft tissues of the residual limb. A new configuration of the MSS model is proposed to respect the non-compressibility property of the soft tissues by adding non-linear “Corrective Springs”. The numeric model is to be generated from the scanned model of the stump. For this purpose, we propose a fusion scheme of four RGB-Depth sensors for a rapid and low-cost scan with error reduction techniques. Finally, the virtual residual limb is used in the socket designing phase. A parametric design method is proposed and investigated. The design problem is transformed into a constraint-satisfaction-problem whose constraints are derived from the inverse calculation of the stump-socket interaction. The inverse approach has been chosen to eliminate the need for expensive contact formulation. This fact leads to rapid calculations, and consequently, allows to provide real-time numerical feedback during the designing process. The validation was done by comparing the results of our system with the output of FE simulations. The system has been implemented with a user-friendly graphical interface and virtually tested and numerically validated. This system reduces the limitations of the current practices. However, a lot of works is still ahead to refine and develop the system and validate it with clinical experiments.
Download or read book Prosthetic Biomechanics in Engineering written by Noor Azuan Abu Osman and published by CRC Press. This book was released on 2021-12-31 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prosthetic biomechanics is an interdisciplinary field of engineering, medicine, and biology, focused on enhancing people's lifestyles. In the past 20 years, the field of prosthetic biomechanics and its potential have grown due to the support of advances in engineering technologies. Prosthetic Biomechanics in Engineering is about the recent advances in prosthetic engineering research. The scope of the book is focused on the design, development, and evaluation of a prosthetic systems that are being used in biomechanical applications. The book covers advanced materials, conceptual design, classification, ergonomics design applications, brain computer interface (BCI) system, motion analysis, postural stand stability, upper and lower limb prosthetics, types of suspension systems for prosthetics, Fiber Bragg Grating-based techniques, and pressure on the residual limb and the socket. The early chapters effectively describe new sensors for in-socket systems, new pylon material, and advanced gait analysis. Further chapters discuss advanced techniques for the design and development of prosthetics based on clinical and emergency uses. The information provided in this book is intended for researchers and investigators to encourage further advances in the field of prosthetics research, and for the development of rehabilitation equipment for the improvement of human health, and it: Presents recent advances in prosthetic biomechanics engineering research Discusses the design and development of limb prosthetic systems Explores advanced concepts of the prosthetic sockets Describes gait analysis of prosthetics and orthotics Dr Noor Azuan Abu Osman is a practicing engineer and Professor of Biomechanics with Department of Biomedical Engineering, Faculty of Engineering, University of Malaya, Malaysia.
Download or read book Research in Interactive Design Vol 3 written by Jean-Pierre Nadeau and published by Springer Science & Business Media. This book was released on 2011-04-23 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an accurate overview of the recent research or industrial application in interactive design. The different arguments, taken from the international conference Virtual Concept 2005, will provide the reader with some advanced solutions concerning new methods and tools by discussing modelling techniques, design solution space exploration and interactive process organization.
Download or read book Orthotics and Prosthetics in Rehabilitation written by Michelle M. Lusardi and published by Butterworth-Heinemann. This book was released on 2007 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether you are a student or a clinician, if you work with patients with neuromuscular and musculoskeletal impairments, you will find this text supplies a strong foundation in and appreciation for the field of orthotics and prosthetics that will give you the critical skills you need when working with this unique client population.
Download or read book Journal of Rehabilitation Research and Development written by and published by . This book was released on 1986 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atlas of Limb Prosthetics written by American Academy of Orthopaedic Surgeons and published by Amer Academy of Orthopaedic. This book was released on 2002-01-01 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newly available after being out of print for several years, this is the definitive reference on the surgical and prosthetic management of acquired or congenital limb loss. Covers indications for amputation vs. limb salvage for trauma, peripheral vascular disease, and tumours; indications for prostheses for amputation levels; and rehabilitation approaches.
Download or read book Prosthetics and Orthotics written by Ron Seymour and published by Lippincott Williams & Wilkins. This book was released on 2002 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the lower extremities and spine, this extensively illustrated text presents a problem-solving approach to the evaluation and prescription of prosthetics and orthotics in physical therapy interventions. Prosthetics and Orthotics presents the latest developments in materials and fabrications, an in-depth analysis of gait deviations and interventions, conditions, psychosocial issues, biomechanics, and more. This invaluable resource also includes pediatric and geriatric perspectives, scientific literature supporting evidence-based practice, exercise and functional activities for the patient, case studies following the APTA's "Guide to Physical Therapist Practice", critical thinking questions, lab activities and practical applications.
Download or read book Journal of Rehabilitation R D written by and published by . This book was released on 2009 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prosthetics and Patient Management written by Kevin Carroll and published by SLACK Incorporated. This book was released on 2006 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering both upper and lower extremity prosthetics, this book provides the information clinicians need to manage a range of prosthetic patients, and their disorders. The authors cover practical solutions to everyday problems that clinicians encounter, from early prosthetic management to issues facing the more advanced prosthetic user. The text is broken down into four sections encompassing the range of subjects that confront practitioners, including Early Management; Rehabilitation of Patients with Lower Limb Amputation; Rehabilitation of Patients with Upper Limb Amputations; and Beyond the Basics, which includes special considerations for children and futuristic concepts.
Download or read book Atlas of Amputations and Limb Deficiencies written by Douglas G. Smith and published by American Academy of Orthpaedic Surgeons. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the major advances in the field since the last edition in 1992. New chapters cover amputee care in wartime, the role of the Krukenberg proceedure in developing countries, the rise of the amputee consumer movement, and the rapidly expanding role of sports and recreation for amputees, as well as the more controversial topics of osseointegration and transplantation. The major influence of orthopaedic surgeons in the development of both amputation surgery and prosthetics is noted in the greatly expanded chapter on the history of these fields. A chapter on absence of the lumbar spine and sacrum has been added, as well as a chapter on surgical revision.
Download or read book Rehabilitation R D Progress Reports written by and published by . This book was released on 1996 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
