Download or read book Kinetics and Catalysis written by and published by . This book was released on 1987 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kinetics of Chemical Reactions written by Guy B. Marin and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second, extended and updated edition presents the current state of kinetics of chemical reactions, combining basic knowledge with results recently obtained at the frontier of science. Special attention is paid to the problem of the chemical reaction complexity with theoretical and methodological concepts illustrated throughout by numerous examples taken from heterogeneous catalysis combustion and enzyme processes. Of great interest to graduate students in both chemistry and chemical engineering.
Download or read book Chemical Chaos written by Stephen K. Scott and published by Oxford University Press. This book was released on 1993 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Table of contents: 1. Introduction. 2. Mappings. 3. Flows. 1. Two-variable systems. 4. Flows II. Three-vairable systems. 5. Forced systems. 6. Coupled systems. 7.Experimental methods. 8. The Belousov-Zhabotinskii reaction and other solution-phase reactions. 9. Gas-phase reactions. 10. Heterogeneous catalysis. 11. Electrodissolution reactions. 12. Biochemical systems. Index.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalytic Combustion written by Sophie A. Cottilard and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic combustion has been developed as a method of promoting efficient combustion over a wide range of air-to-fuel ratios with a minimum pollutant formation at low temperatures as compared to conventional flame combustion. In this book, the authors present current research in the study of catalytic combustion including commercial and industrial research in combustion and fluidisation engineering; the catalytic combustion of soot; using metal oxides to improve catalytic efficiency; catalytic combustion in the removal of pollutants from exhaust gases and in the energy conversion field and the catalytic combustion of methane using ceria-zirconia.
Download or read book Modeling and Simulation of Heterogeneous Catalytic Reactions written by Olaf Deutschmann and published by John Wiley & Sons. This book was released on 2013-09-18 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nobel Prize in Chemistry 2007 awarded to Gerhard Ertl for his groundbreaking studies in surface chemistry highlighted the importance of heterogeneous catalysis not only for modern chemical industry but also for environmental protection. Heterogeneous catalysis is seen as one of the key technologies which could solve the challenges associated with the increasing diversification of raw materials and energy sources. It is the decisive step in most chemical industry processes, a major method of reducing pollutant emissions from mobile sources and is present in fuel cells to produce electricity. The increasing power of computers over the last decades has led to modeling and numerical simulation becoming valuable tools in heterogeneous catalysis. This book covers many aspects, from the state-of-the-art in modeling and simulations of heterogeneous catalytic reactions on a molecular level to heterogeneous catalytic reactions from an engineering perspective. This first book on the topic conveys expert knowledge from surface science to both chemists and engineers interested in heterogeneous catalysis. The well-known and international authors comprehensively present many aspects of the wide bridge between surface science and catalytic technologies, including DFT calculations, reaction dynamics on surfaces, Monte Carlo simulations, heterogeneous reaction rates, reactions in porous media, electro-catalytic reactions, technical reactors, and perspectives of chemical and automobile industry on modeling heterogeneous catalysis. The result is a one-stop reference for theoretical and physical chemists, catalysis researchers, materials scientists, chemical engineers, and chemists in industry who would like to broaden their horizon and get a substantial overview on the different aspects of modeling and simulation of heterogeneous catalytic reactions.
Download or read book Chemistry 2e written by Paul Flowers and published by . This book was released on 2019-02-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry 2e is designed to meet the scope and sequence requirements of the two-semester general chemistry course. The textbook provides an important opportunity for students to learn the core concepts of chemistry and understand how those concepts apply to their lives and the world around them. The book also includes a number of innovative features, including interactive exercises and real-world applications, designed to enhance student learning. The second edition has been revised to incorporate clearer, more current, and more dynamic explanations, while maintaining the same organization as the first edition. Substantial improvements have been made in the figures, illustrations, and example exercises that support the text narrative. Changes made in Chemistry 2e are described in the preface to help instructors transition to the second edition.
Download or read book Catalysis written by James J Spivey and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an increasing challenge for chemical industry and research institutions to find cost-efficient and environmentally sound methods of converting natural resources into fuels chemicals and energy. Catalysts are essential to these processes and the Catalysis Specialist Periodical Report series serves to highlight major developments in this area. This series provides systematic and detailed reviews of topics of interest to scientists and engineers in the catalysis field. The coverage includes all major areas of heterogeneous and homogeneous catalysis and also specific applications of catalysis such as NOx control kinetics and experimental techniques such as microcalorimetry. Each chapter is compiled by recognised experts within their specialist fields and provides a summary of the current literature. This series will be of interest to all those in academia and industry who need an up-to-date critical analysis and summary of catalysis research and applications. Catalysis will be of interest to anyone working in academia and industry that needs an up-to-date critical analysis and summary of catalysis research and applications. Specialist Periodical Reports provide systematic and detailed review coverage in major areas of chemical research. Compiled by teams of leading experts in their specialist fields, this series is designed to help the chemistry community keep current with the latest developments in their field. Each volume in the series is published either annually or biennially and is a superb reference point for researchers. www.rsc.org/spr
Download or read book Dynamics of Surfaces and Reaction Kinetics in Heterogeneous Catalysis written by G.F. Froment and published by Elsevier. This book was released on 1997-09-03 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many processes of the chemical industry are based upon heterogeneous catalysis. Two important items of these processes are the development of the catalyst itself and the design and optimization of the reactor. Both aspects would benefit from rigorous and accurate kinetic modeling, based upon information on the working catalyst gained from classical steady state experimentation, but also from studies using surface science techniques, from quantum chemical calculations providing more insight into possible reaction pathways and from transient experimentation dealing with reactions and reactors. This information is seldom combined into a kinetic model and into a quantitative description of the process. Generally the catalytic aspects are dealt with by chemists and by physicists, while the chemical engineers are called upon for mechanical aspects of the reactor design and its control. The symposium "Dynamics of Surfaces and Reaction Kinetics in Heterogeneous Catalysis" aims at illustrating a more global and concerted approach through a number of prestigious keynote lectures and severely screened oral and poster presentations.
Download or read book Principles and Practice of Heterogeneous Catalysis written by John Meurig Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This long-awaited second edition of the successful introduction to the fundamentals of heterogeneous catalysis is now completely revised and updated. Written by internationally acclaimed experts, this textbook includes fundamentals of adsorption, characterizing catalysts and their surfaces, the significance of pore structure and surface area, solid-state and surface chemistry, poisoning, promotion, deactivation and selectivity of catalysts, as well as catalytic process engineering. A final section provides a number of examples and case histories. With its color and numerous graphics plus references to help readers to easily find further reading, this is a pivotal work for an understanding of the principles involved.
Download or read book American Doctoral Dissertations written by and published by . This book was released on 1994 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interfacial Electrochemistry written by Andrzej Wieckowski and published by Routledge. This book was released on 2017-11-22 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text probes topics and reviews progress in interfacial electrochemistry. It supplies chapter abstracts to give readers a concise overview of individual subjects and there are more than 1500 drawings, photographs, micrographs, tables and equations. The 118 contributors are international scholars who present theory, experimentation and applications.
Download or read book Closed Cycle Frequency Stable CO2 Laser Technology written by Carmen E. Batten and published by . This book was released on 1987 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Conference on Colloid and Surface Science written by Y. Iwasawa and published by Elsevier. This book was released on 2001-02-15 with total page 1129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this Conference was to discuss the results of recent developments and the future prospect in science and technology of the field. The field has been growing and flourishing, while indicating many problems to be uncovered and solved. The conference was structured to encourage interaction and to stimulate the exchange of ideas to accomplish the above purpose.Key issues and materials related to the Conference were included as follows: • Molecular Assemblies in Solutions; • Fine Particles and Colloidal Dispersions; • Supramolecular Organized Films; • Nanostructural Solid Surfaces; • Industrial Applications and Products.The Conference comprised 2 plenary lectures, 42 invited lectures, 150 oral presentations and 266 poster presentations.
Download or read book Kinetic Models of Catalytic Reactions written by G.S. Yablonskii and published by Elsevier. This book was released on 1991-04-17 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written by a group of mathematicians and chemists whose common interest is in the complex dynamics of catalytic reactions. Based on developments in mathematical chemistry, a general theory is described that allows the investigation of the relationships between the kinetic characteristics of complex reactions and their detailed reaction mechanism. Furthermore, a comprehensive analysis is made of some typical mechanism of catalytic reactions, in particular for the oxidation of carbon monoxide on platinum metals. In fact, the book presents three kinetics: (a) detailed, oriented to the elucidation of a detailed reaction mechanism according to its kinetic laws; (b) applied, with the aim of obtaining kinetic relationships for the further design of chemical reactors; and (c) mathematical kinetics whose purpose is the analysis of mathematical models for heterogeneous catalytic reactions taking place under steady- or unsteady-state conditions.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Colloid and Interface Science V3 written by Milton Kerker and published by Elsevier. This book was released on 2012-12-02 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloid and Interface Science, Volume III: Adsorption, Catalysis, Solid Surfaces, Wetting, Surface Tension, and Water covers the proceedings of the International Conference on Colloids and Surfaces, held in San Juan, Puerto Rico on June 21-25, 1976. The conference is sponsored jointly by the Division of Colloid and Surface Chemistry of the American Chemical Society and the International Union of Pure and Applied Chemistry in celebration of the 50th Anniversary of the Division and the 50th Colloid and Surface Science Symposium. This volume contains 56 chapters that cover the subjects of adsorption, catalysis, solid surfaces, wetting, surface tension, and water. Other topics discussed include chemisorption; analytical methods for surface analysis; reaction kinetics; polymeric colloid systems; hydrogel-water interface; and the effect of various parameters, such as temperature and pressure. The concluding chapters explore surface and interfacial tension measurement, capillarity, thermal expansion of water, and heat capacity of vicinal water.
