Download or read book Advanced Multicarrier Technologies for Future Radio Communication written by Hanna Bogucka and published by John Wiley & Sons. This book was released on 2017-07-10 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical review of state-of-the-art non-contiguous multicarrier technologies that are revolutionizing how data is transmitted, received, and processed This book addresses the advantages and the limitations of modern multicarrier technologies and how to meet the challenges they pose using non-contiguous multicarrier technologies and novel algorithms that enhance spectral efficiency, interference robustness, and reception performance. It explores techniques using non-contiguous subcarriers which allow for flexible spectrum aggregation while achieving high spectral efficiency and flexible transmission and reception at lower OSI layers. These include non-contiguous orthogonal frequency division multiplexing (NC-OFDM), its enhanced version, non-contiguous filter-bank-based multicarrier (NC-FBMC), and generalized multicarrier. Following an overview of current multicarrier technologies for radio communication, the authors examine particular properties of these technologies that allow for more efficient usage within key directions of 5G. They examine the principles of NC-OFDM and discuss efficient transmitter and receiver design. They present the principles of FBMC modulation and discuss key challenges for FBMC communications while comparing performance results with traditional OFDM. They move on from there to a fascinating discussion of GMC modulation within which they clearly demonstrate how that technology encompasses all of the advantages of previously discussed techniques, as well as all imaginable multi- and single-carrier waveforms. Addresses the problems and limitations of current multicarrier technologies (OFDM) Describes innovative techniques using non-contiguous multicarrier waveforms as well as filter-band based and generalized multicarrier waveforms Provides a thorough review of the practical limitations and solutions for evolving and breakthrough 5G communication technologies Explores the future outlook for non-contiguous multicarrier technologies as regards their greater industrial realization, hardware practicality, and other challenges Advanced Multicarrier Technologies for Future Radio Communication: 5G and Beyondis an indispensable working resource fortelecommunication engineers, researchers and academics, as well as graduate and post-graduate students of telecommunications. At the same time, it provides a fascinating look at the shape of things to come for telecommunication industry executives, telecom operators, regulators, policy makers, and economists.

Download or read book The 14th IEEE 2003 International Symposium on Personal Indoor and Mobile Radio Communications written by Ke Gong and published by I E E E. This book was released on 2003 with total page 1070 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Progress in Advanced Computing and Intelligent Engineering written by Chhabi Rani Panigrahi and published by Springer Nature. This book was released on 2021-04-15 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on theory, practice and applications in the broad areas of advanced computing techniques and intelligent engineering. This book includes 74 scholarly articles which were accepted for presentation from 294 submissions in the 5th ICACIE during 25–27 June 2020 at Université des Mascareignes (UdM), Mauritius, in collaboration with Rama Devi Women’s University, Bhubaneswar, India, and S‘O’A Deemed to be University, Bhubaneswar, India. This book brings together academicians, industry persons, research scholars and students to share and disseminate their knowledge and scientific research work related to advanced computing and intelligent engineering. It helps to provide a platform to the young researchers to find the practical challenges encountered in these areas of research and the solutions adopted. The book helps to disseminate the knowledge about some innovative and active research directions in the field of advanced computing techniques and intelligent engineering, along with some current issues and applications of related topics.

Download or read book LTE for 4G Mobile Broadband written by Farooq Khan and published by Cambridge University Press. This book was released on 2009-03-26 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand the new technologies of the LTE standard and their impact on system performance improvements with this practical guide.

Download or read book OFDM and MC CDMA written by Lajos Hanzo and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless communications has witnessed a tremendous growth during the past decade and further spectacular enabling technology advances are expected in an effort to render ubiquitous wireless connectivity a reality. Currently, a technical in-depth book on this subject is unavailable, which has a similar detailed exposure of OFDM, MIMO-OFDM and MC-CDMA. A further attraction of the joint treatment of these topics is that it allows the reader to view their design trade-offs in a comparative context. Divided into three main parts: Part I provides a detailed exposure of OFDM designed for employment in various applications Part II is another design alternative applicable in the context of OFDM systems where the channel quality fluctuations observed are averaged out with the aid of frequency-domain spreading codes, which leads to the concept of MC-CDMA Part III discusses how to employ multiple antennas at the base station for the sake of supporting multiple users in the uplink By providing an all-encompassing self-contained treatment this volume will appeal to a wide readership, as it is both an easy-reading textbook and a high-level research monograph.

Download or read book Understanding LTE with MATLAB written by Houman Zarrinkoub and published by John Wiley & Sons. This book was released on 2014-01-28 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to technical details related to the Physical Layer of the LTE standard with MATLAB® The LTE (Long Term Evolution) and LTE-Advanced are among the latest mobile communications standards, designed to realize the dream of a truly global, fast, all-IP-based, secure broadband mobile access technology. This book examines the Physical Layer (PHY) of the LTE standards by incorporating three conceptual elements: an overview of the theory behind key enabling technologies; a concise discussion regarding standard specifications; and the MATLAB® algorithms needed to simulate the standard. The use of MATLAB®, a widely used technical computing language, is one of the distinguishing features of this book. Through a series of MATLAB® programs, the author explores each of the enabling technologies, pedagogically synthesizes an LTE PHY system model, and evaluates system performance at each stage. Following this step-by-step process, readers will achieve deeper understanding of LTE concepts and specifications through simulations. Key Features: • Accessible, intuitive, and progressive; one of the few books to focus primarily on the modeling, simulation, and implementation of the LTE PHY standard • Includes case studies and testbenches in MATLAB®, which build knowledge gradually and incrementally until a functional specification for the LTE PHY is attained • Accompanying Web site includes all MATLAB® programs, together with PowerPoint slides and other illustrative examples Dr Houman Zarrinkoub has served as a development manager and now as a senior product manager with MathWorks, based in Massachusetts, USA. Within his 12 years at MathWorks, he has been responsible for multiple signal processing and communications software tools. Prior to MathWorks, he was a research scientist in the Wireless Group at Nortel Networks, where he contributed to multiple standardization projects for 3G mobile technologies. He has been awarded multiple patents on topics related to computer simulations. He holds a BSc degree in Electrical Engineering from McGill University and MSc and PhD degrees in Telecommunications from the Institut Nationale de la Recherche Scientifique, in Canada. www.wiley.com/go/zarrinkoub

Download or read book OFDM for Optical Communications written by William Shieh and published by Academic Press. This book was released on 2009-09-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: - The first book on optical OFDM by the leading pioneers in the field - The only book to cover error correction codes for optical OFDM - Gives applications of OFDM to free-space communications, optical access networks, and metro and log haul transports show optical OFDM can be implemented - Contains introductions to signal processing for optical engineers and optical communication fundamentals for wireless engineers This book gives a coherent and comprehensive introduction to the fundamentals of OFDM signal processing, with a distinctive focus on its broad range of applications. It evaluates the architecture, design and performance of a number of OFDM variations, discusses coded OFDM, and gives a detailed study of error correction codes for access networks, 100 Gb/s Ethernet and future optical networks. The emerging applications of optical OFDM, including single-mode fiber transmission, multimode fiber transmission, free space optical systems, and optical access networks are examined, with particular attention paid to passive optical networks, radio-over-fiber, WiMAX and UWB communications. Written by two of the leading contributors to the field, this book will be a unique reference for optical communications engineers and scientists. Students, technical managers and telecom executives seeking to understand this new technology for future-generation optical networks will find the book invaluable. William Shieh is an associate professor and reader in the electrical and electronic engineering department, The University of Melbourne, Australia. He received his M.S. degree in electrical engineering and Ph.D. degree in physics both from University of Southern California. Ivan Djordjevic is an Assistant Professor of Electrical and Computer Engineering at the University of Arizona, Tucson, where he directs the Optical Communications Systems Laboratory (OCSL). His current research interests include optical networks, error control coding, constrained coding, coded modulation, turbo equalization, OFDM applications, and quantum error correction. "This wonderful book is the first one to address the rapidly emerging optical OFDM field. Written by two leading researchers in the field, the book is structured to comprehensively cover any optical OFDM aspect one could possibly think of, from the most fundamental to the most specialized. The book adopts a coherent line of presentation, while striking a thoughtful balance between the various topics, gradually developing the optical-physics and communication-theoretic concepts required for deep comprehension of the topic, eventually treating the multiple optical OFDM methods, variations and applications. In my view this book will remain relevant for many years to come, and will be increasingly accessed by graduate students, accomplished researchers as well as telecommunication engineers and managers keen to attain a perspective on the emerging role of OFDM in the evolution of photonic networks." -- Prof. Moshe Nazarathy, EE Dept., Technion, Israel Institute of Technology - The first book on optical OFDM by the leading pioneers in the field - The only book to cover error correction codes for optical OFDM - Applications of OFDM to free-space communications, optical access networks, and metro and log haul transports show optical OFDM can be implemented - An introduction to signal processing for optical communications - An introduction to optical communication fundamentals for the wireless engineer

Download or read book MIMO OFDM Wireless Communications with MATLAB written by Yong Soo Cho and published by John Wiley & Sons. This book was released on 2010-08-20 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: MIMO-OFDM is a key technology for next-generation cellular communications (3GPP-LTE, Mobile WiMAX, IMT-Advanced) as well as wireless LAN (IEEE 802.11a, IEEE 802.11n), wireless PAN (MB-OFDM), and broadcasting (DAB, DVB, DMB). In MIMO-OFDM Wireless Communications with MATLAB®, the authors provide a comprehensive introduction to the theory and practice of wireless channel modeling, OFDM, and MIMO, using MATLAB® programs to simulate the various techniques on MIMO-OFDM systems. One of the only books in the area dedicated to explaining simulation aspects Covers implementation to help cement the key concepts Uses materials that have been classroom-tested in numerous universities Provides the analytic solutions and practical examples with downloadable MATLAB® codes Simulation examples based on actual industry and research projects Presentation slides with key equations and figures for instructor use MIMO-OFDM Wireless Communications with MATLAB® is a key text for graduate students in wireless communications. Professionals and technicians in wireless communication fields, graduate students in signal processing, as well as senior undergraduates majoring in wireless communications will find this book a practical introduction to the MIMO-OFDM techniques. Instructor materials and MATLAB® code examples available for download at www.wiley.com/go/chomimo

Download or read book Signal Processing for 5G written by Fa-Long Luo and published by John Wiley & Sons. This book was released on 2016-10-17 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and invaluable guide to 5G technology, implementation and practice in one single volume. For all things 5G, this book is a must-read. Signal processing techniques have played the most important role in wireless communications since the second generation of cellular systems. It is anticipated that new techniques employed in 5G wireless networks will not only improve peak service rates significantly, but also enhance capacity, coverage, reliability , low-latency, efficiency, flexibility, compatibility and convergence to meet the increasing demands imposed by applications such as big data, cloud service, machine-to-machine (M2M) and mission-critical communications. This book is a comprehensive and detailed guide to all signal processing techniques employed in 5G wireless networks. Uniquely organized into four categories, New Modulation and Coding, New Spatial Processing, New Spectrum Opportunities and New System-level Enabling Technologies, it covers everything from network architecture, physical-layer (down-link and up-link), protocols and air interface, to cell acquisition, scheduling and rate adaption, access procedures and relaying to spectrum allocations. All technology aspects and major roadmaps of global 5G standard development and deployments are included in the book. Key Features: Offers step-by-step guidance on bringing 5G technology into practice, by applying algorithms and design methodology to real-time circuit implementation, taking into account rapidly growing applications that have multi-standards and multi-systems. Addresses spatial signal processing for 5G, in particular massive multiple-input multiple-output (massive-MIMO), FD-MIMO and 3D-MIMO along with orbital angular momentum multiplexing, 3D beamforming and diversity. Provides detailed algorithms and implementations, and compares all multicarrier modulation and multiple access schemes that offer superior data transmission performance including FBMC, GFDM, F-OFDM, UFMC, SEFDM, FTN, MUSA, SCMA and NOMA. Demonstrates the translation of signal processing theories into practical solutions for new spectrum opportunities in terms of millimeter wave, full-duplex transmission and license assisted access. Presents well-designed implementation examples, from individual function block to system level for effective and accurate learning. Covers signal processing aspects of emerging system and network architectures, including ultra-dense networks (UDN), software-defined networks (SDN), device-to-device (D2D) communications and cloud radio access network (C-RAN).

Download or read book Fundamentals of Wireless Communication written by David Tse and published by Cambridge University Press. This book was released on 2005-05-26 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook takes a unified view of the fundamentals of wireless communication and explains cutting-edge concepts in a simple and intuitive way. An abundant supply of exercises make it ideal for graduate courses in electrical and computer engineering and it will also be of great interest to practising engineers.

Download or read book Cognitive Radio Networks written by Yang Xiao and published by CRC Press. This book was released on 2008-12-24 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fueled by ongoing and increasing consumer demand, the explosive growth in spectrum-based communications continues to tax the finite resources of the available spectrum. One possible solution, Cognitive Radio Network (CRN), allows unlicensed users opportunistic access to licensed bands without interfering with existing users. Although some initial s

Download or read book Stochastic Processes and Random Vibrations written by Júlíus Sólnes and published by John Wiley & Sons. This book was released on 1997-07-07 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning with the basics of probability and an overview of stochastic process, this book goes on to explore their engineering applications: random vibration and system analysis. It addresses extreme conditions such as distribution of large vibration peaks, probabilities of exceeding certain limits, and fatigue. Includes numerous tested examples: earthquake risk analysis, distribution of extreme wind speeds, analysis of structural reliability, earthquake response of tall multi-storey structure and wind loading of tall towers.

Download or read book OFDM and MC CDMA for Broadband Multi User Communications WLANs and Broadcasting written by Lajos Hanzo and published by John Wiley & Sons. This book was released on 2005-01-28 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: Orthogonal frequency-division multiplexing (OFDM) is a method of digital modulation in which a signal is split into several narrowband channels at different frequencies. CDMA is a form of multiplexing, which allows numerous signals to occupy a single transmission channel, optimising the use of available bandwidth. Multiplexing is sending multiple signals or streams of information on a carrier at the same time in the form of a single, complex signal and then recovering the separate signals at the receiving end. Multi-Carrier (MC) CDMA is a combined technique of Direct Sequence (DS) CDMA (Code Division Multiple Access) and OFDM techniques. It applies spreading sequences in the frequency domain. Wireless communications has witnessed a tremendous growth during the past decade and further spectacular enabling technology advances are expected in an effort to render ubiquitous wireless connectivity a reality. This technical in-depth book is unique in its detailed exposure of OFDM, MIMO-OFDM and MC-CDMA. A further attraction of the joint treatment of these topics is that it allows the reader to view their design trade-offs in a comparative context. Divided into three main parts: Part I provides a detailed exposure of OFDM designed for employment in various applications Part II is another design alternative applicable in the context of OFDM systems where the channel quality fluctuations observed are averaged out with the aid of frequency-domain spreading codes, which leads to the concept of MC-CDMA Part III discusses how to employ multiple antennas at the base station for the sake of supporting multiple users in the uplink Portrays the entire body of knowledge currently available on OFDM Provides the first complete treatment of OFDM, MIMO(Multiple Input Multiple Output)-OFDM and MC-CDMA Considers the benefits of channel coding and space time coding in the context of various application examples and features numerous complete system design examples Converts the lessons of Shannon’s information theory into design principles applicable to practical wireless systems Combines the benefits of a textbook with a research monograph where the depth of discussions progressively increase throughout the book This all-encompassing self-contained treatment will appeal to researchers, postgraduate students and academics, practising research and development engineers working for wireless communications and computer networking companies and senior undergraduate students and technical managers.

Download or read book OFDM Baseband Receiver Design for Wireless Communications written by Tzi-Dar Chiueh and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Orthogonal frequency-division multiplexing (OFDM) access schemes are becoming more prevalent among cellular and wireless broadband systems, accelerating the need for smaller, more energy efficient receiver solutions. Up to now the majority of OFDM texts have dealt with signal processing aspects. To address the current gap in OFDM integrated circuit (IC) instruction, Chiueh and Tsai have produced this timely text on baseband design. OFDM Baseband Receiver Design for Wireless Communications covers the gamut of OFDM technology, from theories and algorithms to architectures and circuits. Chiueh and Tsai give a concise yet comprehensive look at digital communications fundamentals before explaining modulation and signal processing algorithms in OFDM receivers. Moreover, the authors give detailed treatment of hardware issues -- from design methodology to physical IC implementation. Closes the gap between OFDM theory and implementation Enables the reader to transfer communication receiver concepts into hardware design wireless receivers with acceptable implementation loss achieve low-power designs Contains numerous figures to illustrate techniques Features concrete design examples of MC-CDMA systems and cognitive radio applications Presents theoretical discussions that focus on concepts rather than mathematical derivation Provides a much-needed single source of material from numerous papers Based on course materials for a class in digital communication IC design, this book is ideal for advanced undergraduate or post-graduate students from either VLSI design or signal processing backgrounds. New and experienced engineers in industry working on algorithms or hardware for wireless communications devices will also find this book to be a key reference.

Download or read book Baseband Receiver Design for Wireless MIMO OFDM Communications written by Tzi-Dar Chiueh and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second Edition of OFDM Baseband Receiver Design for Wirless Communications, this book expands on the earlier edition with enhanced coverage of MIMO techniques, additional baseband algorithms, and more IC design examples. The authors cover the full range of OFDM technology, from theories and algorithms to architectures and circuits. The book gives a concise yet comprehensive look at digital communication fundamentals before explaining signal processing algorithms in receivers. The authors give detailed treatment of hardware issues - from architecture to IC implementation. Links OFDM and MIMO theory with hardware implementation Enables the reader to transfer communication received concepts into hardware; design wireless receivers with acceptable implemntation loss; achieve low-power designs Covers the latest standards, such as DVB-T2, WiMax, LTE and LTE-A Includes more baseband algorithms, like soft-decoding algorithms such as BCJR and SOVA Expanded treatment of channel models, detection algorithms and MIMO techniques Features concrete design examples of WiMAX systems and cognitive radio apllications Companion website with lecture slides for instructors Based on materials developed for a course in digital communication IC design, this book is ideal for graduate students and researchers in VLSI design, wireless communications, and communications signal processing. Practicing engineers working on algorithms or hardware for wireless communications devices will also find this to be a key reference.

Download or read book Multi Carrier and Spread Spectrum Systems written by K. Fazel and published by John Wiley & Sons. This book was released on 2004-02-06 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frequency spectrum is a limited and valuable resource for wireless communications. A good example can be observed among network operators in Europe for the prices to pay for UMTS-frequency bands. Therefore, the first goal when designing future wireless communication systems (e.g. 4G - fourth generation) has to be the increase in spectral efficiency. The development in digital communications in the past years has enabled efficient modulation and coding techniques for robust and spectral efficient data, speech, audio and video transmission. These are the multi-carrier modulation (e.g. OFDM) and the spread spectrum technique (e.g. DS-CDMA), where OFDM was chosen for broadcast applications (DVB, DAB) as well as for broadband wireless indoor standards (ETSI HIPERLAN-II, IEEE-802.11) and the DS-CDMA was selected in mobile communications (IS-95, third generation mobile radio systems world wide, UMTS/IMT 2000). Since 1993 various combinations of multi-carrier (MC) modulation and the spread spectrum (SS) technique have been introduced and the field of MC-SS communications has become an independent and important research topic with increasing activities. New application fields have been proposed such as high rate cellular mobile, high rate wireless indoor and LMDS. It has been shown that MC-SS offers the high spectral efficiency, robustness and flexibility that is required for the next generation systems. Meanwhile, different alternative hybrid schemes such as OFDM/OFDMA, MC-TDMA, etc. have been deeply analysed and adopted in different international standards (ETSI-BRAN, IEEE-802 & MMAC). Multi-Carrier & Spread-Spectrum: Analysis of Hybrid Air Interfaces draws together all of the above mentioned hybrid schemes therefore providing a greatly needed resource for system engineers, telecommunication designers and researchers in order to enable them to develop, build and deploy several schemes based on MC-transmission for the next generation systems (which will be an integration of broadband multimedia services covering both 4G mobile and fixed wireless systems). * Offers a complete treatment of multi-carrier, spread-spectrum (SS) and time division multiplexing (TDM) techniques * Provides an in-depth insight into hybrid multiple access techniques based on multi-carrier (MC) transmission * Presents numerous hybrid multiple access and air interface architectures including OFDM/CDMA, MC-CDMA, MC-DS-CDMA and MT-CDMA * Covers new techniques such as space-time coding and software radio Telecommunications engineers, hardware & software system designers and researchers as well as students, lecturers and technicians will all find this an invaluable addition to their bookshelf.

Download or read book OFDM Wireless LANs written by John Terry and published by Sams Publishing. This book was released on 2002 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Deploy and optimize your wireless LAN using the new standard for broadband wireless communication, OFDM. A comprehensive reference written by two experts who helped create the OFDM specifications. A detailed, practical guide to OFDM WLANs does not exist, requiring readers to seek out multiple sources of information, such as white papers and research notes. Detailed explanations of the concepts and algorithms behind OFDM-context that is missing from the two OFDM books currently available. This book explains OFDM WLAN basics, including components of OFDM and multicarrier WLAN standards. It provides a practical approach to OFDM by including software and hardware examples and detailed implementation explanations. OFDM Multicarrier Wireless Networks: A Practical Approach defines and explains the mathematical concepts behind OFDM necessary for successful OFDM WLAN implementations. Juha Heiskala is a research engineer at Nokia Research Center in Irving, TX. Heiskala is active in the IEEE 802.11 standards bodies and has been tasked with developing the 802.11a system simulation on several software platforms. He is the inventor/co-inventor of three pending patents in the area of OFDM LANs and co-designed with Dr. John Terry the modulation and coding scheme for achieving 100 Mbps speeds within currently allocated band specifications for OFDM WLANs. John Terry, Ph.D. is a senior research engineer at Nokia Research Center. He is currently managing the OFDM modulation and coding project in the HSA group. Dr. Terry has published several white papers, given numerous presentations on wireless communications, and generated four patents related to OFDM WLANs. He has 10 years of experience working in wireless communications, including tenures at NASA Glen Research Center and Texas Instruments.