Download or read book Iron Catalysis Design And Applications written by Jose M Palomo and published by World Scientific. This book was released on 2021-03-15 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Iron Catalysis: Design and Applications is an exciting new book that takes readers inside the world of iron catalysis guided by international catalysis expert, Dr Jose M Palomo. Iron is the most abundant metal in the planet, cost-effective, environmentally friendly, with an easily manipulated remediation process. In the last few years the use of this nonprecious metal has gained extraordinary attention particularly for its potential as a catalyst in different areas. This book compiles a series of chapters describing the most significant advances in the last few years since the design of different iron catalysts and nanocatalysts and iron-containing artificial and natural enzymes. The chapters also cover its application in different areas of interest such as organic synthesis, environmental remediation, enzyme-like activities or the creation of novel types of electrodes for battery design.
Download or read book Iron Catalysis in Organic Chemistry written by Bernd Plietker and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first comprehensive book to cover this exciting field also deals with the biological aspects, such as enzymes with iron. Following an introduction, this handy reference and handbook goes on to deal with reductions, oxidations of C, H- and C=C bonds, oxidative allylic oxygenation and amination, the oxidation of heteroatoms, cross coupling reactions, aromatic and nucleophilic substitutions, addition to carbonyl compounds, and cyclisations as well as ring opening reactions. The chapters are clearly classified according to the reaction type, allowing readers to quickly locate the desired information.
Download or read book Iron Catalysis written by Bernd Plietker and published by Springer. This book was released on 2011-01-03 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Juan I. Padrón and Víctor S. Martín: Catalysis by means of Fe-based Lewis acids; Hiroshi Nakazawa*, Masumi Itazaki: Fe–H Complexes in Catalysis; Kristin Schröder, Kathrin Junge, Bianca Bitterlich, and Matthias Beller: Fe-catalyzed Oxidation Reactions of Olefins, Alkanes and Alcohols: Involvement of Oxo- and Peroxo Complexes; Chi-Ming Che, Cong-Ying Zhou, Ella Lai-Ming Wong: Catalysis by Fe=X Complexes (X=NR, CR2); René Peters, Daniel F. Fischer and Sascha Jautze: Ferrocene and Half Sandwich Complexes as Catalysts with Iron Participation; Markus Jegelka, Bernd Plietker: Catalysis by Means of Complex Ferrates.
Download or read book Iron Catalysis II written by Eike Bauer and published by Springer. This book was released on 2015-07-23 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Organometallic Chemistry presents critical overviews of research results in organometallic chemistry. As our understanding of organometallic structure, properties and mechanisms increases, new ways are opened for the design of organometallic compounds and reactions tailored to the needs of such diverse areas as organic synthesis, medical research, biology and materials science. Thus the scope of coverage includes a broad range of topics of pure and applied organometallic chemistry, where new breakthroughs are being achieved that are of significance to a larger scientific audience. The individual volumes of Topics in Organometallic Chemistry are thematic. Review articles are generally invited by the volume editors.
Download or read book Recent Advances in Iron Catalysis written by Hans-Joachim Knölker and published by . This book was released on 2020 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transition metal-catalyzed reactions play a key role in many transformations of synthetic organic chemistry. For most of these reactions, noble metals, for example, palladium, have been used as catalysts. Over the last two decades, more and more first row transition metals have been applied as catalysts for organic reactions, with iron taking the center stage. The driving forces behind this development are not only the high costs for the noble metals but also their toxicity. Iron is the most abundant transition metal in the Earth's crust, and thus, it is considerably cheaper than the precious noble metals. Moreover, iron compounds are involved in many biological processes, and thus, iron exhibits a low toxicity. Because of this low toxicity, iron-catalyzed reactions are important for an environmentally benign sustainable chemistry. However, iron catalysts are not only investigated to replace noble metals; they offer many applications in synthesis beyond those of classical noble metal catalysts. Several articles of the present book emphasize the complementarity of iron-catalyzed reactions as compared to reactions catalyzed by noble metals. The book shows intriguing recent developments and the current standing of iron-catalyzed reactions as well as applications to organic synthesis.
Download or read book Nanostructured Catalysts written by Susannah L. Scott and published by Springer Science & Business Media. This book was released on 2008-04-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the recent advent of nanotechnology, research and development in the area of nanostructured materials has gained unprecedented prominence. Novel materials with potentially exciting new applications are being discovered at a much higher rate than ever before. Innovative tools to fabricate, manipulate, characterize and evaluate such materials are being developed and expanded. To keep pace with this extremely rapid growth, it is necessary to take a breath from time to time, to critically assess the current knowledge and provide thoughts for future developments. This book represents one of these moments, as a number of prominent scientists in nanostructured materials join forces to provide insightful reviews of their areas of expertise, thus offering an overall picture of the state-- the art of the field. Nanostructured materials designate an increasing number of materials with designed shapes, surfaces, structures, pore systems, etc. Nanostructured materials with modified surfaces include those whose surfaces have been altered via such techniques as grafting and tethering of organic or organometallic species, or through various deposition procedures including electro, electroless and vapor deposition, or simple adsorption. These materials find important applications in catalysis, separation and environmental remediation. Materials with patterned surfaces, which are essential for the optoelectronics industry, constitute another important class of surface-modified nanostructured materials. Other materials are considered nanostructured because of their composition and internal organization.
Download or read book Iron and Cobalt Catalysts written by Wilson D. Shafer and published by MDPI. This book was released on 2020-06-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the turn of the last century when the field of catalysis was born, iron and cobalt have been key players in numerous catalysis processes. These metals, due to their ability to activate CO and CH, haev a major economic impact worldwide. Several industrial processes and synthetic routes use these metals: biomass-to-liquids (BTL), coal-to-liquids (CTL), natural gas-to-liquids (GTL), water-gas-shift, alcohol synthesis, alcohol steam reforming, polymerization processes, cross-coupling reactions, and photocatalyst activated reactions. A vast number of materials are produced from these processes, including oil, lubricants, waxes, diesel and jet fuels, hydrogen (e.g., fuel cell applications), gasoline, rubbers, plastics, alcohols, pharmaceuticals, agrochemicals, feed-stock chemicals, and other alternative materials. However, given the true complexities of the variables involved in these processes, many key mechanistic issues are still not fully defined or understood. This Special Issue of Catalysis will be a collaborative effort to combine current catalysis research on these metals from experimental and theoretical perspectives on both heterogeneous and homogeneous catalysts. We welcome contributions from the catalysis community on catalyst characterization, kinetics, reaction mechanism, reactor development, theoretical modeling, and surface science.
Download or read book Petroleum Refining Design and Applications Handbook Volume 1 written by A. Kayode Coker and published by John Wiley & Sons. This book was released on 2018-08-09 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a renaissance that is occurring in chemical and process engineering, and it is crucial for today's scientists, engineers, technicians, and operators to stay current. With so many changes over the last few decades in equipment and processes, petroleum refining is almost a living document, constantly needing updating. With no new refineries being built, companies are spending their capital re-tooling and adding on to existing plants. Refineries are like small cities, today, as they grow bigger and bigger and more and more complex. A huge percentage of a refinery can be changed, literally, from year to year, to account for the type of crude being refined or to integrate new equipment or processes. This book is the most up-to-date and comprehensive coverage of the most significant and recent changes to petroleum refining, presenting the state-of-the-art to the engineer, scientist, or student. Useful as a textbook, this is also an excellent, handy go-to reference for the veteran engineer, a volume no chemical or process engineering library should be without. Written by one of the world's foremost authorities, this book sets the standard for the industry and is an integral part of the petroleum refining renaissance. It is truly a must-have for any practicing engineer or student in this area.
Download or read book Functionalized Nanomaterials for Catalytic Application written by Chaudhery Mustansar Hussain and published by John Wiley & Sons. This book was released on 2021-07-21 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionalized Nanomaterials for Catalytic Application
Download or read book Pincer Compounds written by David Morales-Morales and published by Elsevier. This book was released on 2018-04-11 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pincer Compounds: Chemistry and Applications offers valuable state-of-the-art coverage highlighting highly active areas of research—from mechanistic work to synthesis and characterization. The book focuses on small molecule activation chemistry (particularly H2 and hydrogenation), earth abundant metals (such as Fe), actinides, carbene-pincers, chiral catalysis, and alternative solvent usage. The book covers the current state of the field, featuring chapters from renowned contributors, covering four continents and ranging from still-active pioneers to new names emerging as creative strong contributors to this fascinating and promising area. Over a decade since the publication of Morales-Morales and Jensen's The Chemistry of Pincer Compounds (Elsevier 2007), research in this unique area has flourished, finding a plethora of applications in almost every single branch of chemistry—from their traditional application as very robust and active catalysts all the way to potential biological and pharmaceutical applications. - Describes the chemistry and applications of this important class of organometallic and coordination compounds - Includes contributions from global leaders in the field, featuring pioneers in the area as well as emerging experts conducting exciting research on pincer complexes - Highlights areas of promising and active research, including small molecule activation, earth abundant metals, and actinide chemistry
Download or read book Mechanisms In Heterogeneous Catalysis written by Rutger A Van Santen and published by World Scientific. This book was released on 2023-06-28 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous catalysis has developed over the past two centuries as a technology driven by the needs of society, and is part of Nobel Prize-winning science. This book describes the spectacular increase in molecular understanding of heterogenous catalytic reactions in important industrial processes. Reaction mechanism and kinetics are discussed with a unique focus on their relation with the inorganic chemistry of the catalyst material. An introductory chapter presents the development of catalysis science and catalyst discovery from a historical perspective. Five chapters that form the thrust of the book are organized by type of reaction, reactivity principles, and mechanistic theories, which provide the scientific basis to structure-function relationships of catalyst performance. Present-day challenges to catalysis are sketched in a final chapter. Written by one of the world's leading experts on the topic, this definitive text is an essential reference for students, researchers and engineers working in this multibillion-dollar field.
Download or read book Design and Synthesis of Stereogenic at Iron Complexes with Multidentate Ligands and Application in Asymmetric Catalysis written by Philipp Stefan Steinlandt and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanotechnology in Catalysis written by Bert Sels and published by John Wiley & Sons. This book was released on 2017-06-21 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the R&D efforts in the field that have resulted in a plethora of novel applications over the past decade, this handbook gives a comprehensive overview of the tangible benefits of nanotechnology in catalysis. By bridging fundamental research and industrial development, it provides a unique perspective on this scientifically and economically important field. While the first three parts are devoted to preparation and characterization of nanocatalysts, the final three provide in-depth insights into their applications in the fine chemicals industry, the energy industry, and for environmental protection, with expert authors reporting on real-life applications that are on the brink of commercialization. Timely reading for catalytic chemists, materials scientists, chemists in industry, and process engineers.
Download or read book Noble metal free Electrocatalysts For Hydrogen Energy written by Qingsheng Gao and published by World Scientific. This book was released on 2022-08-23 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: With interdisciplinary perspectives from internationally renowned experts, Noble-Metal-Free Electrocatalysts for Hydrogen Energy is one of the most authoritative references to focus solely on state-of-the-art knowledge of noble-metal-free electrocatalysts, as well as their nanostructures and unique properties. The chapters within contain cutting-edge breakthroughs, horizons, and insights into functional materials for energy applications.This book contains over 3000 references and 200 figures, and is a highly valuable resource for scientists, students, and engineers working in the fields of electrochemistry, catalysis, fuel cells, batteries, and supercapacitors.
Download or read book Ammonia Synthesis Catalysts Innovation And Practice written by Huazhang Liu and published by World Scientific. This book was released on 2013-03-21 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a review of worldwide developments in ammonia synthesis catalysts over the last 30 years. It focuses on the new generation of Fe1-xO based catalysts and ruthenium catalysts — both are major breakthroughs for fused iron catalysts. The basic theory for ammonia synthesis is systematically explained, covering topics such as the chemical components, crystal structure, preparation, reduction, performance evaluation, characterization of the catalysts, the mechanism and kinetics of ammonia synthesis reaction. Both theory and practice are combined in this presentation, with emphasis on the research methods, application and exploitation of catalysts.The comprehensive volume includes an assessment of the economic and engineering aspects of ammonia plants based on the performance of catalysts. Recent developments in photo-catalysis, electro-catalysis, biocatalysis and new uses of ammonia are also introduced in this book.The author, Professor Huazhang Liu, has been engaged in research and practice for more than 50 years in this field and was the inventor of the first Fe1-xO based catalysts in the world. He has done a lot of research on Fe3O4 based- and ruthenium based-catalysts, and has published more than 300 papers and obtained 21 patents during his career.
Download or read book Chiral Ferrocenes in Asymmetric Catalysis written by Li-Xin Dai and published by John Wiley & Sons. This book was released on 2010-02-01 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book meets the long-felt need for a reference on ferrocenes with the focus on catalysis. It provides a thorough overview of the synthesis and characterization of different types of chiral ferrocene ligands, their application to various catalytic asymmetric reactions, and versatile chiral materials as well as drug intermediates synthesized from them. Written by the "who's who" of ferrocene catalysis, this is a guide to the design of new ferrocene ligands and synthesis of chiral synthetic intermediates, and will thus be useful for organic, catalytic and synthetic chemists working in academia, industrial research or process development.
Download or read book Ligand Design in Metal Chemistry written by Mark Stradiotto and published by John Wiley & Sons. This book was released on 2016-09-01 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of ancillary ligands used to modify the structural and reactivity properties of metal complexes has evolved into a rapidly expanding sub-discipline in inorganic and organometallic chemistry. Ancillary ligand design has figured directly in the discovery of new bonding motifs and stoichiometric reactivity, as well as in the development of new catalytic protocols that have had widespread positive impact on chemical synthesis on benchtop and industrial scales. Ligand Design in Metal Chemistry presents a collection of cutting-edge contributions from leaders in the field of ligand design, encompassing a broad spectrum of ancillary ligand classes and reactivity applications. Topics covered include: Key concepts in ligand design Redox non-innocent ligands Ligands for selective alkene metathesis Ligands in cross-coupling Ligand design in polymerization Ligand design in modern lanthanide chemistry Cooperative metal-ligand reactivity P,N Ligands for enantioselective hydrogenation Spiro-cyclic ligands in asymmetric catalysis This book will be a valuable reference for academic researchers and industry practitioners working in the field of ligand design, as well as those who work in the many areas in which the impact of ancillary ligand design has proven significant, for example synthetic organic chemistry, catalysis, medicinal chemistry, polymer science and materials chemistry.
