Download or read book Infrared Spectroscopy written by Barbara H. Stuart and published by John Wiley & Sons. This book was released on 2004-08-20 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an introduction to those needing to use infrared spectroscopy for the first time, explaining the fundamental aspects of this technique, how to obtain a spectrum and how to analyse infrared data covering a wide range of applications. Includes instrumental and sampling techniques Covers biological and industrial applications Includes suitable questions and problems in each chapter to assist in the analysis and interpretation of representative infrared spectra Part of the ANTS (Analytical Techniques in the Sciences) Series.
Download or read book Infrared and Raman Spectroscopy written by Peter Larkin and published by Elsevier. This book was released on 2017-11-13 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Raman Spectroscopy, Principles and Spectral Interpretation, Second Edition provides a solid introduction to vibrational spectroscopy with an emphasis on developing critical interpretation skills. This book fully integrates the use of both IR and Raman spectroscopy as spectral interpretation tools, enabling the user to utilize the strength of both techniques while also recognizing their weaknesses. This second edition more than doubles the amount of interpreted IR and Raman spectra standards and spectral unknowns. The chapter on characteristic group frequencies is expanded to include increased discussions of sulphur and phosphorus organics, aromatic and heteroaromatics as well as inorganic compounds. New topics include a discussion of crystal lattice vibrations (low frequency/THz), confocal Raman microscopy, spatial resolution in IR and Raman microscopy, as well as criteria for selecting Raman excitation wavelengths. These additions accommodate the growing use of vibrational spectroscopy for process analytical monitoring, nanomaterial investigations, and structural and identity determinations to an increasing user base in both industry and academia. Integrates discussion of IR and Raman spectra Pairs generalized IR and Raman spectra of functional groups with tables and text Includes over 150 fully interpreted, high quality IR and Raman reference spectra Contains fifty-four unknown IR and Raman spectra, with a corresponding answer key
Download or read book Concepts and Methods of 2D Infrared Spectroscopy written by Peter Hamm and published by Cambridge University Press. This book was released on 2011-02-24 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2D infrared (IR) spectroscopy is a cutting-edge technique, with applications in subjects as diverse as the energy sciences, biophysics and physical chemistry. This book introduces the essential concepts of 2D IR spectroscopy step-by-step to build an intuitive and in-depth understanding of the method. This unique book introduces the mathematical formalism in a simple manner, examines the design considerations for implementing the methods in the laboratory, and contains working computer code to simulate 2D IR spectra and exercises to illustrate involved concepts. Readers will learn how to accurately interpret 2D IR spectra, design their own spectrometer and invent their own pulse sequences. It is an excellent starting point for graduate students and researchers new to this exciting field. Computer codes and answers to the exercises can be downloaded from the authors' website, available at www.cambridge.org/9781107000056.
Download or read book Biophotonics written by Matthew Baker and published by Morgan & Claypool Publishers. This book was released on 2016-02-01 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biophotonic diagnostics/biomedical spectroscopy can revolutionise the medical environment by providing a responsive and objective diagnostic environment. This book aims to explain the fundamentals of the physical techniques used combined with the particular requirements of analysing medical/clinical samples as a resource for any interested party. In addition, it will show the potential of this field for the future of medical science and act as a driver for translation across many different biological problems/questions.
Download or read book Infrared Spectroscopy in Conservation Science written by Michele R. Derrick and published by Getty Publications. This book was released on 2000-03-16 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practical information on the use of infrared (IR) spectroscopy for the analysis of materials found in cultural objects. Designed for scientists and students in the fields of archaeology, art conservation, microscopy, forensics, chemistry, and optics, the book discusses techniques for examining the microscopic amounts of complex, aged components in objects such as paintings, sculptures, and archaeological fragments. Chapters include the history of infrared spectroscopy, the basic parameters of infrared absorption theory, IR instrumentation, analysis methods, sample collection and preparation, and spectra interpretation. The authors cite several case studies, such as examinations of Chumash Indian paints and the Dead Sea Scrolls. The Institute’s Tools for Conservation series provides practical scientific procedures and methodologies for the practice of conservation. The series is specifically directed to conservation scientists, conservators, and technical experts in related fields.
Download or read book Biointerface Characterization by Advanced IR Spectroscopy written by C.-M. Pradier and published by Elsevier. This book was released on 2011-07-26 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: IR spectroscopy has become without any doubt a key technique to answer questions raised when studying the interaction of proteins or peptides with solid surfaces for a fundamental point of view as well as for technological applications. Principle, experimental set ups, parameters and interpretation rules of several advanced IR-based techniques; application to biointerface characterisation through the presentation of recent examples, will be given in this book. It will describe how to characterise amino acids, protein or bacterial strain interactions with metal and oxide surfaces, by using infrared spectroscopy, in vacuum, in the air or in an aqueous medium. Results will highlight the performances and perspectives of the technique. Description of the principles, expermental setups and parameter interpretation, and the theory for several advanced IR-based techniques for interface characterisation Contains examples which demonstrate the capacity, potential and limits of the IR techniques Helps finding the most adequate mode of analysis Contains examples Contains a glossary by techniques and by keywords
Download or read book IR and Raman Spectroscopy written by Siegfried Wartewig and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to practical IR and Raman spectroscopy. This interactive course shows newcomers the decisive and central steps in IR and Raman spectroscopy, together with their processing. Using the latest version of the packaged BRUKER software, users can manipulate the data to meet their own special requirements for further evaluation, allowing them to do without automatic processing or expert help. Furthermore, the CD-ROM contains a comprehensive library of spectra for comparing data results with model compounds. Unique in its successful interplay of text, software and pre-prepared data.
Download or read book IR written by Nelson L. Alpert and published by Springer. This book was released on 1970 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this text was written primarily by one of the present authors (HAS), with a chapter on instrumentation contributed by a second (NLA). The volume was well received, and to keep the text up-to-date a second edition was planned. For this second edition, a third author (WEK) was invited, whose background complemented that of the other two. Each of the authors was assigned several chapters as his primary task while the complete manuscript remained the second ary responsibility of all three. It is hoped that this approach has resulted in a work that is even more thorough than the first edition in covering the basic concepts of infrared spectroscopy. NELSON L. ALPERT WILLIAM E. KEISER HERMAN A. SZYMANSKI v PREFACE TO THE FIRST EDITION My experience with the many infrared spectroscopy institutes held at Canisius College and many discussions with both beginners and experienced practitioners in infrared spectroscopy have convinced me that there is a need for an introductory text devoted entirely to infrared spectroscopy, a text which can be utilized even by those who approach this study with only a limited background. This volume sprang from that conviction. It is intended for all who wish to use infrared spec troscopy in research - especially chemists doing structural work - in routine control work, in industrial development, or in medical appli cations or those military applications where it is employed as an analytical tool.
Download or read book Fourier Transform Infrared Spectrometry written by Peter R. Griffiths and published by John Wiley & Sons. This book was released on 2007-03-16 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: A bestselling classic reference, now expanded and updated to cover the latest instrumentation, methods, and applications The Second Edition of Fourier Transform Infrared Spectrometry brings this core reference up to date on the uses of FT-IR spectrometers today. The book starts with an in-depth description of the theory and current instrumentation of FT-IR spectrometry, with full chapters devoted to signal-to-noise ratio and photometric accuracy. Many diverse types of sampling techniques and data processing routines, most of which can be performed on even the less expensive instruments, are then described. Extensively updated, the Second Edition: * Discusses improvements in optical components * Features a full chapter on FT Raman Spectrometry * Contains new chapters that focus on different ways of measuring spectra by FT-IR spectrometry, including fourteen chapters on such techniques as microspectroscopy, internal and external reflection, and emission and photoacoustic spectrometry * Includes a new chapter introducing the theory of vibrational spectrometry * Organizes material according to sampling techniques Designed to help practitioners using FT-IR capitalize on the plethora of techniques for modern FT-IR spectrometry and plan their experimental procedures correctly, this is a practical, hands-on reference for chemists and analysts. It's also a great resource for students who need to understand the theory, instrumentation, and applications of FT-IR.
Download or read book Handbook of Infrared Spectroscopy of Ultrathin Films written by Valeri P. Tolstoy and published by John Wiley & Sons. This book was released on 2003-07-21 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the rapid increase in commercially available Fouriertransform infrared spectrometers and computers over the past tenyears, it has now become feasible to use IR spectrometry tocharacterize very thin films at extended interfaces. At the sametime, interest in thin films has grown tremendously because ofapplications in microelectronics, sensors, catalysis, andnanotechnology. The Handbook of Infrared Spectroscopy of UltrathinFilms provides a practical guide to experimental methods,up-to-date theory, and considerable reference data, critical forscientists who want to measure and interpret IR spectra ofultrathin films. This authoritative volume also: Offers informationneeded to effectively apply IR spectroscopy to the analysis andevaluation of thin and ultrathin films on flat and rough surfacesand on powders at solid-gaseous, solid-liquid, liquid-gaseous,liquid-liquid, and solid-solid interfaces. Provides full discussion of theory underlying techniques Describes experimental methods in detail, including optimumconditions for recording spectra and the interpretation ofspectra Gives detailed information on equipment, accessories, andtechniques Provides IR spectroscopic data tables as appendixes, includingthe first compilation of published data on longitudinal frequenciesof different substances Covers new approaches, such as Surface Enhanced IR spectroscopy(SEIR), time-resolved FTIR spectroscopy, high-resolutionmicrospectroscopy and using synchotron radiation
Download or read book Infrared Spectroscopy of Minerals and Related Compounds written by Nikita V. Chukanov and published by Springer. This book was released on 2016-03-09 with total page 1117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the application of IR spectroscopy in mineralogical investigations, as well as modern trends in the IR spectroscopy of minerals. It includes the most important methodological aspects; characteristic IR bands of different chemical groups and coordination polyhedra; application of IR spectroscopy to the investigation of the crystal chemistry of amphiboles, phyllosilicates, tourmalines etc.; neutral molecules entrapped by microporous minerals; and analysis of hydrogen in nominally anhydrous minerals. About 1600 IR spectra (illustrations as well as a list of wavenumbers) of minerals and some related compounds are accompanied by detailed descriptions of the standard samples used. Each spectrum provides information about the occurrence, appearance, associated minerals, its empirical formula, and unit-cell parameters. The book also provides insights into sample preparation and/or spectrum registration methods. It includes IR spectra of 1020 minerals that were not covered in the book “Infrared spectra of mineral species: Extended library” published in 2014 and written by one of the authors. On average, each page provides information on two minerals/compounds. Subsections correspond to different classes of compounds (silicates, phosphates, arsenates, oxides etc.). About 290 new spectra have been obtained, and the remaining 1310 spectra are taken from most reliable literature sources (published over the last 60 years) and are redrawn in a unified style.
Download or read book Infrared Spectroscopy for Food Quality Analysis and Control written by Da-Wen Sun and published by Academic Press. This book was released on 2009-03-05 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international panel of professional and academic peers, the book provides the engineer and technologist working in research, development and operations in the food industry with critical and readily accessible information on the art and science of infrared spectroscopy technology. The book should also serve as an essential reference source to undergraduate and postgraduate students and researchers in universities and research institutions. Infrared (IR) Spectroscopy deals with the infrared part of the electromagnetic spectrum. It measure the absorption of different IR frequencies by a sample positioned in the path of an IR beam. Currently, infrared spectroscopy is one of the most common spectroscopic techniques used in the food industry. With the rapid development in infrared spectroscopic instrumentation software and hardware, the application of this technique has expanded into many areas of food research. It has become a powerful, fast, and non-destructive tool for food quality analysis and control. Infrared Spectroscopy for Food Quality Analysis and Control reflects this rapid technology development. The book is divided into two parts. Part I addresses principles and instruments, including theory, data treatment techniques, and infrared spectroscopy instruments. Part II covers the application of IRS in quality analysis and control for various foods including meat and meat products, fish and related products, and others. Explores this rapidly developing, powerful and fast non-destructive tool for food quality analysis and control Presented in two Parts -- Principles and Instruments, including theory, data treatment techniques, and instruments, and Application in Quality Analysis and Control for various foods making it valuable for understanding and application Fills a need for a comprehensive resource on this area that includes coverage of NIR and MVA
Download or read book Infrared Spectroscopy written by James M. Thompson and published by CRC Press. This book was released on 2018-01-19 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is estimated that there are about 10 million organic chemicals known, and about 100,000 new organic compounds are produced each year. Some of these new chemicals are made in the laboratory and some are isolated from natural products. The structural determination of these compounds is the job of the chemist. There are several instrumental techniques used to determine the structures of organic compounds. These include NMR, UV/visible, infrared spectroscopy, mass spectrometry, and X-ray crystallography. Of all the instrumental techniques listed, infrared spectroscopy and mass spectrometry are the two most popular techniques, mainly because they tend to be less expensive and give us the most structural information. This book is an introductory text designed to acquaint undergraduate and graduate students with the basic theory and interpretative techniques of infrared spectroscopy. Much of the material in this text has been used over a period of several years for teaching courses in materials characterization and chemical analysis. It presents the infrared spectra of the major classes of organic compounds and correlates the infrared bands (bond vibrations) of each spectrum with the structural features of the compound it represents. This has been done for hydrocarbons, organic acids, ketones, aldehydes, esters, anhydrides, phenols, amines, and amides. The text discusses the origin of the fragments, techniques, innovations, and applications in infrared spectroscopy. It is interspersed with many illustrations, examples, an adequate but not overwhelming bibliography, and problems for students. It will serve as a lecture text for a one-semester course in infrared spectroscopy or can be used to teach the infrared spectroscopy portion of a broader course in material characterization and chemical analysis.
Download or read book Infrared Spectral Interpretation written by Brian C. Smith and published by CRC Press. This book was released on 2018-02-06 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This author's second volume introduces basic principles of interpreting infrared spectral data, teaching its readers to make sense of the data coming from an infrared spectrometer. Contents include spectra and diagnostic bands for the more common functional groups as well as chapters on polyester spectra and interpretation aids. Discussions include: Science of infrared interpretation Light and molecular vibrations How and why molecules absorb infrared radiation Peak heights, intensities, and widths Hydrocarbons, carbonyl groups, and molecules with C-N bonds Polymers and inorganic molecules The use of atlases, library searching, spectral subtraction, and the Internet in augmenting interpretation Each chapter presents an introduction to the nomenclature and structure of a specific functional group and proceeds with the important diagnostic bands for each group. Infrared Spectral Interpretation serves both novices and experienced practitioners in this field. The author maintains a website and blog with supplemental material. His training course schedule is also available online.
Download or read book Organic Spectroscopy written by Lal Dhar Singh Yadav and published by Springer Science & Business Media. This book was released on 2013-08-30 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Spectroscopy presents the derivation of structural information from UV, IR, Raman, 1H NMR, 13C NMR, Mass and ESR spectral data in such a way that stimulates interest of students and researchers alike. The application of spectroscopy for structure determination and analysis has seen phenomenal growth and is now an integral part of Organic Chemistry courses. This book provides: -A logical, comprehensive, lucid and accurate presentation, thus making it easy to understand even through self-study; -Theoretical aspects of spectral techniques necessary for the interpretation of spectra; -Salient features of instrumentation involved in spectroscopic methods; -Useful spectral data in the form of tables, charts and figures; -Examples of spectra to familiarize the reader; -Many varied problems to help build competence ad confidence; -A separate chapter on ‘spectroscopic solutions of structural problems’ to emphasize the utility of spectroscopy. Organic Spectroscopy is an invaluable reference for the interpretation of various spectra. It can be used as a basic text for undergraduate and postgraduate students of spectroscopy as well as a practical resource by research chemists. The book will be of interest to chemists and analysts in academia and industry, especially those engaged in the synthesis and analysis of organic compounds including drugs, drug intermediates, agrochemicals, polymers and dyes.
Download or read book Spectroscopy in Inorganic Chemistry written by Chintamani Nagesa Ramachandra Rao and published by . This book was released on 1971 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultrafast Infrared Vibrational Spectroscopy written by Michael D. Fayer and published by CRC Press. This book was released on 2013-03-04 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advent of laser-based sources of ultrafast infrared pulses has extended the study of very fast molecular dynamics to the observation of processes manifested through their effects on the vibrations of molecules. In addition, non-linear infrared spectroscopic techniques make it possible to examine intra- and intermolecular interactions and how such interactions evolve on very fast time scales, but also in some instances on very slow time scales. Ultrafast Infrared Vibrational Spectroscopy is an advanced overview of the field of ultrafast infrared vibrational spectroscopy based on the scientific research of the leading figures in the field. The book discusses experimental and theoretical topics reflecting the latest accomplishments and understanding of ultrafast infrared vibrational spectroscopy. Each chapter provides background, details of methods, and explication of a topic of current research interest. Experimental and theoretical studies cover topics as diverse as the dynamics of water and the dynamics and structure of biological molecules. Methods covered include vibrational echo chemical exchange spectroscopy, IR-Raman spectroscopy, time resolved sum frequency generation, and 2D IR spectroscopy. Edited by a recognized leader in the field and with contributions from top researchers, including experimentalists and theoreticians, this book presents the latest research methods and results. It will serve as an excellent resource for those new to the field, experts in the field, and individuals who want to gain an understanding of particular methods and research topics.