Download or read book Introduction to Focused Ion Beams written by Lucille A. Giannuzzi and published by Springer Science & Business Media. This book was released on 2006-05-18 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Focused Ion Beams is geared towards techniques and applications. This is the only text that discusses and presents the theory directly related to applications and the only one that discusses the vast applications and techniques used in FIBs and dual platform instruments.
Download or read book High Resolution Focused Ion Beams FIB and its Applications written by Jon Orloff and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we have attempted to produce a reference on high resolution focused ion beams (FIBs) that will be useful for both the user and the designer of FIB instrumentation. We have included a mix of theory and applications that seemed most useful to us. The field of FIBs has advanced rapidly since the application of the first field emission ion sources in the early 1970s. The development of the liquid metal ion source (LMIS) in the late 1960s and early 1970s and its application for FIBs in the late 1970s have resulted in a powerful tool for research and for industry. There have been hundreds of papers written on many aspects of LMIS and FIBs, and a useful and informative book on these subjects was published in 1991 by Phil Prewett and Grame Mair. Because there have been so many new applications and uses found for FIBs in the last ten years we felt that it was time for another book on the subject.
Download or read book Ion Beams in Materials Processing and Analysis written by Bernd Schmidt and published by Springer Science & Business Media. This book was released on 2012-12-13 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of ion beam application in modern materials research is provided, including the basics of ion beam physics and technology. The physics of ion-solid interactions for ion implantation, ion beam synthesis, sputtering and nano-patterning is treated in detail. Its applications in materials research, development and analysis, developments of special techniques and interaction mechanisms of ion beams with solid state matter result in the optimization of new material properties, which are discussed thoroughly. Solid-state properties optimization for functional materials such as doped semiconductors and metal layers for nano-electronics, metal alloys, and nano-patterned surfaces is demonstrated. The ion beam is an important tool for both materials processing and analysis. Researchers engaged in solid-state physics and materials research, engineers and technologists in the field of modern functional materials will welcome this text.
Download or read book Focused Ion Beam Systems written by Nan Yao and published by Cambridge University Press. This book was released on 2011-04-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focused ion beam (FIB) system is an important tool for understanding and manipulating the structure of materials at the nanoscale. Combining this system with an electron beam creates a DualBeam - a single system that can function as an imaging, analytical and sample modification tool. Presenting the principles, capabilities, challenges and applications of the FIB technique, this edited volume, first published in 2007, comprehensively covers the ion beam technology including the DualBeam. The basic principles of ion beam and two-beam systems, their interaction with materials, etching and deposition are all covered, as well as in situ materials characterization, sample preparation, three-dimensional reconstruction and applications in biomaterials and nanotechnology. With nanostructured materials becoming increasingly important in micromechanical, electronic and magnetic devices, this self-contained review of the range of ion beam methods, their advantages, and when best to implement them is a valuable resource for researchers in materials science, electrical engineering and nanotechnology.
Download or read book Ion Beams for Materials Analysis written by J. R. Bird and published by Academic Press. This book was released on 1989 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of ion beams for materials analysis involves many different ion-atom interaction processes which previously have largely been considered in separate reviews and texts. A list of books and conference proceedings is given in Table 2. This book is divided into three parts, the first which treats all ion beam techniques and their applications in such diverse fields as materials science, thin film and semiconductor technology, surface science, geology, biology, medicine, environmental science, archaeology and so on.
Download or read book Ion Beam Modification of Solids written by Werner Wesch and published by Springer. This book was released on 2016-07-14 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the method of ion beam modification of solids in realization, theory and applications in a comprehensive way. It provides a review of the physical basics of ion-solid interaction and on ion-beam induced structural modifications of solids. Ion beams are widely used to modify the physical properties of materials. A complete theory of ion stopping in matter and the calculation of the energy loss due to nuclear and electronic interactions are presented including the effect of ion channeling. To explain structural modifications due to high electronic excitations, different concepts are presented with special emphasis on the thermal spike model. Furthermore, general concepts of damage evolution as a function of ion mass, ion fluence, ion flux and temperature are described in detail and their limits and applicability are discussed. The effect of nuclear and electronic energy loss on structural modifications of solids such as damage formation, phase transitions and amorphization is reviewed for insulators and semiconductors. Finally some selected applications of ion beams are given.
Download or read book Ion Beam Treatment of Polymers written by Alexey Kondyurin and published by Elsevier. This book was released on 2010-07-07 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer materials are used in different fields of industries, from microelectronice to medicine. Ion beam implantation is method of surface modification when surface properties must be significantly changed and bulk properties of material must be saved. Ion Beam Treatment of Polymers contains results of polymer investigations and techniques development in the field of polymer modification by high energy ion beams. This book is intended for specialists in polymer science who have interest to use an ion beam treatment for improvement of polymer properties, for specialists in physics who search a new application of ion beam and plasma equipment and also for students who look for future fields of high technology. Chapter 1-3 are devoted to overview of the basic processes at high energy ion penetration into solid target. The historical aspects and main physical aspects are covered. A basic equipment principles and main producers of equipment for ion beam treatment are considered. Chapter 4 contains chemical transformations in polymers during and after high energy ion penetration. The modern methods and results of experimental and theoretical investigation are described. Chapters 5-10 are devoted to properties of polymers after ion beam treatment, regimes of treatment, available applications, in particular: increase of adhesion of polymers and a mechanism of an adhesion increase, wetting angle of polymer by water and its stability, adhesion of cells on polymer surface, drug release regulation from polymer coating and others. Chapter 11 contains our last results on polymerisation processes in liquid oligomer composition under high vacuum, plasma and ion beam conditions as simulation of free space environment. * By scientists working in polymer chemistry, physics of ion beam implantation and in development and production of ion beam equipment * Covering industrial and scientific applications of ion beam implanted polymers * Also for students with an interest in future fields of high technology
Download or read book Ion Beam Therapy written by Ute Linz and published by Springer Science & Business Media. This book was released on 2011-12-09 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a detailed, up-to-date account of the basics, the technology, and the clinical use of ion beams for radiation therapy. Theoretical background, technical components, and patient treatment schemes are delineated by the leading experts that helped to develop this field from a research niche to its current highly sophisticated and powerful clinical treatment level used to the benefit of cancer patients worldwide. Rather than being a side-by-side collection of articles, this book consists of related chapters. It is a common achievement by 76 experts from around the world. Their expertise reflects the diversity of the field with radiation therapy, medical and accelerator physics, radiobiology, computer science, engineering, and health economics. The book addresses a similarly broad audience ranging from professionals that need to know more about this novel treatment modality or consider to enter the field of ion beam therapy as a researcher. However, it is also written for the interested public and for patients who might want to learn about this treatment option.
Download or read book Ion Beam Applications written by Ishaq Ahmad and published by BoD – Books on Demand. This book was released on 2018-07-18 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion beam of various energies is a standard research tool in many areas of science, from basic physics to diverse areas in space science and technology, device fabrications, materials science, environment science, and medical sciences. It is an advance and versatile tool to frequently discover applications across a broad range of disciplines and fields. Moreover, scientists are continuously improving the ion beam sources and accelerators to explore ion beam at the forefront of scientific endeavours. This book provides a glance view on MeV ion beam applications, focused ion beam generation and its applications as well as practical applications of ion implantation.
Download or read book Ion Beam Surface Layer Analysis written by Otto Meyer and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The II. International Conference on Ion Beam Surface Layer Analysis was held on September 15-19, 1975 at the Nuclear Research Center, Karlsruhe, Germany. The date fell between two related con ferences: "Application of Ion-Beams to Materials" at Warwick, Eng land and "Atomic Collisions in Solids" at Amsterdam, the Nether lands. The first conference on Ion Beam Surface Layer Analysis was held at Yorktown Heights, New York, 1973. The major topic of that and the present conference was the material analysis with ion beams including backscattering and channeling, nuclear reactions and ion induced X-rays with emphasis on technical problems and no vel applications. The increasing interest in this field was docu mented by 7 invited papers and 85 contributions which were presen ted at the meeting in Karlsruhe to about 150 participants from 21 countries. The oral presentations were followed by parallel ses sions on "Fundamental Aspects", "Analytical Problems" and "Appli cations" encouraging detailed discussions on the topics of most current interest. Summaries of these sessions were presented by the discussion leaders to the whole conference. All invited and contributed papers are included in these proceedings; summaries of the discussion sessions will appear in a separate booklet and are availble from the editors. The application of ion beams to material analysis is now well established.
Download or read book Engineering Thin Films and Nanostructures with Ion Beams written by Emile Knystautas and published by CRC Press. This book was released on 2018-10-03 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: While ion-beam techniques have been used to create thin films in the semiconductor industry for several decades, these methods have been too costly for other surface treatment applications. However, as manufacturing devices become increasingly smaller, the use of a directed-energy ion beam is finding novel industrial applications that require the custom tailoring of new materials and devices, including magnetic storage devices, photonics, opto-electronics, and molecular transport. Engineering Thin Films and Nanostructures with Ion Beams offers a thorough narrative of the recent advances that make this technology relevant to current and future applications. Featuring internationally recognized researchers, the book compiles their expertise in a multidimensional source that: Highlights the mechanisms and visual evidence of the effects of single-ion impacts on metallic surfaces Considers how ion-beam techniques can help achieve higher disk-drive densities Introduces gas-cluster ion-beam technology and reviews its precedents Explains how ion beams are used to aggregate metals and semiconductors into nanoclusters with nonlinear optical properties Addresses current challenges in building equipment needed to produce nanostructures in an industrial setting Examines the combination of ion-beam techniques, particularly with physical vapor deposition Delineates the fabrication of nanopillars, nanoflowers, and interconnected nanochannels in three dimensions by using atomic shadowing techniques Illustrates the production of nanopores of varying dimensions in polymer films, alloys, and superconductors using ion-beam irradiation Shows how fingerprints can be made more reliable as forensic evidence by recoil-mixing them into the substrate using ion beams From the basics of the ion-beam modification of materials to state-of-the-art applications, Engineering Th
Download or read book Material Characterization Using Ion Beams written by J. Thomas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: The extensive use of low-energy accelerators in non-nuclear physics has now reached the stage where these activities are recognized as a natural field of investigation. Many other areas in physics and chemistry have undergone similarly spectacular development: beam foil spectroscopy in atomic physics, studies in atomic collisions, materials implantation, defects creation, nuclear microanalysis, and so on. Now, this most recent activity by itself and in its evident connec tion with the others has brought a new impetus to both the funda mental and the applied aspects of materials science. A summer school on "Material Characterization Using Ion Beams" has resulted from these developments and the realization that the use of ion beams is not restricted to accelerators but covers a wide energy range in the developing technology. The idea of the ion beam as a common denominator of many act1v1t1es dealing with surface and near-surface characterization was enthu siastically received by many scientists and a school on this subject received the positive endorsement of NATO. The Advanced Study Institute on Materials Science has assumed for us the status of an "institution" leading to better contact among the many laboratories engaged in this field. The fourth Institute in this series was held in Aleria, Corsica, between August 22 and September 12, 1976.
Download or read book Engineering Thin Films and Nanostructures with Ion Beams written by Emile Knystautas and published by CRC Press. This book was released on 2018-10-03 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: While ion-beam techniques have been used to create thin films in the semiconductor industry for several decades, these methods have been too costly for other surface treatment applications. However, as manufacturing devices become increasingly smaller, the use of a directed-energy ion beam is finding novel industrial applications that require the custom tailoring of new materials and devices, including magnetic storage devices, photonics, opto-electronics, and molecular transport. Engineering Thin Films and Nanostructures with Ion Beams offers a thorough narrative of the recent advances that make this technology relevant to current and future applications. Featuring internationally recognized researchers, the book compiles their expertise in a multidimensional source that: Highlights the mechanisms and visual evidence of the effects of single-ion impacts on metallic surfaces Considers how ion-beam techniques can help achieve higher disk-drive densities Introduces gas-cluster ion-beam technology and reviews its precedents Explains how ion beams are used to aggregate metals and semiconductors into nanoclusters with nonlinear optical properties Addresses current challenges in building equipment needed to produce nanostructures in an industrial setting Examines the combination of ion-beam techniques, particularly with physical vapor deposition Delineates the fabrication of nanopillars, nanoflowers, and interconnected nanochannels in three dimensions by using atomic shadowing techniques Illustrates the production of nanopores of varying dimensions in polymer films, alloys, and superconductors using ion-beam irradiation Shows how fingerprints can be made more reliable as forensic evidence by recoil-mixing them into the substrate using ion beams From the basics of the ion-beam modification of materials to state-of-the-art applications, Engineering Th
Download or read book Ion Beams in Nanoscience and Technology written by Ragnar Hellborg and published by Springer Science & Business Media. This book was released on 2009-11-09 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energetic ion beam irradiation is the basis of a wide plethora of powerful research- and fabrication-techniques for materials characterisation and processing on a nanometre scale. Materials with tailored optical, magnetic and electrical properties can be fabricated by synthesis of nanocrystals by ion implantation, focused ion beams can be used to machine away and deposit material on a scale of nanometres and the scattering of energetic ions is a unique and quantitative tool for process development in high speed electronics and 3-D nanostructures with extreme aspect radios for tissue engineering and nano-fluidics lab-on-a-chip may be machined using proton beams. This book will benefit practitioners, researchers and graduate students working in the field of ion beams and application and more generally everyone concerned with the broad field of nanoscience and technology.
Download or read book Materials Processing by Cluster Ion Beams written by Isao Yamada and published by CRC Press. This book was released on 2015-08-20 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Processing by Cluster Ion Beams: History, Technology, and Applications discusses the contemporary physics, materials science, surface engineering issues, and nanotechnology capabilities of cluster beam processing. Written by the originator of the gas cluster ion beam (GCIB) concept, this book:Offers an overview of ion beam technologies, f
Download or read book Materials Modification by High fluence Ion Beams written by Roger Kelly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute on Materials Modification by High-Fluence Ion Beams, Viana do Castelo, Portugal, August 24-September 4, 1987
Download or read book Compact Plasma and Focused Ion Beams written by Sudeep Bhattacharjee and published by Taylor & Francis. This book was released on 2013-12-12 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent research has brought the application of microwaves from the classical fields of heating, communication, and generation of plasma discharges into the generation of compact plasmas that can be used for applications such as FIB and small plasma thrusters. However, these new applications bring with them a new set of challenges. With coverage ranging from the basics to new and emerging applications, Compact Plasma and Focused Ion Beams discusses how compact high-density microwave plasmas with dimensions smaller than the geometrical cutoff dimension can be generated and utilized for providing focused ion beams of various elements. Starting with the fundamentals of the cutoff problem for wave propagation in waveguides and plasma diagnostics, the author goes on to explain in detail the plasma production by microwaves in a compact geometry and narrow tubes. He then thoroughly discusses wave interaction with bounded plasmas and provides a deeper understanding of the physics. The book concludes with an up-to-date account of recent research on pulsed microwaves and the application of compact microwave plasmas for multi-element FIB. It provides a consolidated and unified description of the emerging areas in plasma science and technology utilizing wave-based plasma sources based on the author’s own work and experience. The book will be useful not only to established researchers in this area but will also serve as an excellent introduction to those interested in applying these ideas to various current and new applications.