Download or read book Investigations into the Combustion Kinetics of Several Novel Oxygenated Fuels written by Wenyu Sun and published by Springer Nature. This book was released on 2023-09-22 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, attention was paid to several novel oxygenated fuels—carbonates, polyethers and ketones. Combustion kinetic investigations were performed for typical representative compounds, including dimethyl carbonate, diethyl carbonate, cyclopentanone, 3-pentanone, 1,2-dimethoxyethane and dimethoxymethane. For experiments, suitable diagnostic techniques were used to measure the detailed speciation information of the target fuels under different conditions. For kinetic modeling, rate coefficients for crucial elementary reactions were obtained through high-level theoretical calculations. Based on that, validated kinetic models with good predictive performances were developed. On the basis of experimental measurements and model interpretations, this work highlighted two important combustion characteristics regarding the practical use: the pollutant formation and the ignition performance. Besides, the correlation between oxygen-containing functional groups and the aforementioned combustion characteristics was revealed. To reveal the potential interactions between the reaction networks of oxygenated additives and the hydrocarbon base fuels during combustion. Chemical structures of laminar premixed flames fueled by binary fuels were measured, and by changing the initial fuel compositions, the addition effects of the oxygenates on the fuel consumption and pollutant formation behaviors were explored. It was found that complicated chemical interactions do not exist in the reaction networks under the investigated conditions.
Download or read book Investigations Into the Combustion Kinetics of Several Novel Oxygenated Fuels written by Wenyu Sun and published by Springer Theses. This book was released on 2024-09-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, attention was paid to several novel oxygenated fuels--carbonates, polyethers and ketones. Combustion kinetic investigations were performed for typical representative compounds, including dimethyl carbonate, diethyl carbonate, cyclopentanone, 3-pentanone, 1,2-dimethoxyethane and dimethoxymethane. For experiments, suitable diagnostic techniques were used to measure the detailed speciation information of the target fuels under different conditions. For kinetic modeling, rate coefficients for crucial elementary reactions were obtained through high-level theoretical calculations. Based on that, validated kinetic models with good predictive performances were developed. On the basis of experimental measurements and model interpretations, this work highlighted two important combustion characteristics regarding the practical use: the pollutant formation and the ignition performance. Besides, the correlation between oxygen-containing functional groups and the aforementioned combustion characteristics was revealed. To reveal the potential interactions between the reaction networks of oxygenated additives and the hydrocarbon base fuels during combustion. Chemical structures of laminar premixed flames fueled by binary fuels were measured, and by changing the initial fuel compositions, the addition effects of the oxygenates on the fuel consumption and pollutant formation behaviors were explored. It was found that complicated chemical interactions do not exist in the reaction networks under the investigated conditions.
Download or read book Mathematical Modelling of Gas Phase Complex Reaction Systems Pyrolysis and Combustion written by and published by Elsevier. This book was released on 2019-06-07 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling of Gas-Phase Complex Reaction Systems: Pyrolysis and Combustion, Volume 45, gives an overview of the different steps involved in the development and application of detailed kinetic mechanisms, mainly relating to pyrolysis and combustion processes. The book is divided into two parts that cover the chemistry and kinetic models and then the numerical and statistical methods. It offers a comprehensive coverage of the theory and tools needed, along with the steps necessary for practical and industrial applications.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Fuels Reference Book written by Paul Richards and published by SAE International. This book was released on 2014-03-05 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.
Download or read book Combustion Chemistry and the Carbon Neutral Future written by Kenneth Brezinsky and published by Elsevier. This book was released on 2023-02-16 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the demands for cleaner, more efficient, reduced and zero carbon emitting transportation increase, the traditional focus of Combustion Chemistry research is stretching and adapting to help provide solutions to these contemporary issues. Combustion Chemistry and the Carbon Neutral Future: What will the Next 25 Years of Research Require? presents a guide to current research in the field and an exploration of possible future steps as we move towards cleaner, greener and reduced carbon combustion chemistry. Beginning with a discussion of engine emissions and soot, the book goes on to discuss a range of alternative fuels, including hydrogen, ammonia, small alcohols and other bio-oxygenates, natural gas, syngas and synthesized hydrocarbon fuels. Methods for predicting and improving efficiency and sustainability, such as low temperature and catalytic combustion, chemical looping, supercritical fluid combustion, and diagnostic monitoring even at high pressure, are then explored. Some novel aspects of biomass derived aviation fuels and combustion synthesis are also covered. Combining the knowledge and experience of an interdisciplinary team of experts in the field, Combustion Chemistry and the Carbon Neutral Future: What will the Next 25 Years of Research Require? is an insightful guide to current and future focus areas for combustion chemistry researchers in line with the transition to greener, cleaner technologies. - Provides insight on current developments in combustion chemistry as a tool for supporting a reduced-carbon future - Reviews modeling and diagnostic tools, in addition to key approaches and alternative fuels - Includes projections for the future from leaders in the field, pointing current and prospective researchers to potentially fruitful areas for exploration
Download or read book Automotive Fuels Reference Book Fourth Edition written by Paul Richards and published by SAE International. This book was released on 2023-11-15 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: The earlier editions of this title have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited latest edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful, This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources, including e-fuels. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. As CO2 is now an important emission there is also discussion regarding low and non-carbon fuels and how they might be used. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures. (ISBN 9781468605785, ISBN 9781468605792, ISBN 9781468605808, DOI 10.4271/9781468605792)
Download or read book Cleaner Combustion written by Frédérique Battin-Leclerc and published by Springer Science & Business Media. This book was released on 2013-09-06 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This overview compiles the on-going research in Europe to enlarge and deepen the understanding of the reaction mechanisms and pathways associated with the combustion of an increased range of fuels. Focus is given to the formation of a large number of hazardous minor pollutants and the inability of current combustion models to predict the formation of minor products such as alkenes, dienes, aromatics, aldehydes and soot nano-particles which have a deleterious impact on both the environment and on human health. Cleaner Combustion describes, at a fundamental level, the reactive chemistry of minor pollutants within extensively validated detailed mechanisms for traditional fuels, but also innovative surrogates, describing the complex chemistry of new environmentally important bio-fuels. Divided into five sections, a broad yet detailed coverage of related research is provided. Beginning with the development of detailed kinetic mechanisms, chapters go on to explore techniques to obtain reliable experimental data, soot and polycyclic aromatic hydrocarbons, mechanism reduction and uncertainty analysis, and elementary reactions. This comprehensive coverage of current research provides a solid foundation for researchers, managers, policy makers and industry operators working in or developing this innovative and globally relevant field.
Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on 2022-01-21 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively discusses diesel combustion phenomena like ignition delay, fuel-air mixing, rate of heat release, and emissions of smoke, particulate and nitric oxide. It enables quantitative evaluation of these important phenomena and parameters. Most importantly, it attempts to model them with constants that are independent of engine types and hence they could be applied by the engineers and researchers for a general engine. This book emphasizes the importance of the spray at the wall in precisely describing the heat release and emissions for most of the engines on and off-road. It gives models for heat release and emissions. Every model is thoroughly validated by detailed experiments using a broad range of engines. The book describes an elegant quasi-one-dimensional model for heat release in diesel engines with single as well as multiple injections. The book describes how the two aspects, namely, fuel injection rate and the diameter of the combustion bowl in the piston, have enabled meeting advanced emission, noise, and performance standards. The book also discusses the topics of computational fluid dynamics encompassing RANS and LES models of turbulence. Given the contents, this book will be useful for students, researchers and professionals working in the area of vehicle engineering and engine technology. This book will also be a good professional book for practising engineers in the field of combustion engines and automotive engineering.
Download or read book Converting Power into Chemicals and Fuels written by Martin Bajus and published by John Wiley & Sons. This book was released on 2023-10-23 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: CONVERTING POWER INTO CHEMICALS AND FUELS Understand the pivotal role that the petrochemical industry will play in the energy transition by integrating renewable or low-carbon alternatives Power into Chemicals and Fuels stresses the versatility of hydrogen as an enabler of the renewable energy system, an energy vector that can be transported and stored, and a fuel for the transportation sector, heating of buildings and providing heat and feedstock to industry. It can reduce both carbon and local emissions, increase energy security and strengthen the economy, as well as support the deployment of renewable power generation such as wind, solar, nuclear and hydro. With a focus on power-to-X technologies, this book discusses the production of basic petrochemicals in such a way as to minimize the carbon footprint and develop procedures that save energy or use energy from renewable sources. Various different power-to-X system configurations are introduced with discussions on their performance, environmental impact, and cost. Technologies for sustainable hydrogen production are covered, focusing on water electrolysis using renewable energy as well as consideration of the remaining challenges for large scale production and integration with other technologies. Power into Chemicals and Fuels readers will also find: Discussion of recent advances in power-into-x technologies for the production of ethylene, propylene, formic acid, and more Coverage of every stage in the power-into-x process, from power generation to upgrading the final product Thermodynamic, technoeconomic, and life cycle assessment analyses of each major process Power into Chemicals and Fuels is a valuable resource for scientists and engineers working in the petrochemicals and hydrocarbons industries, as well as for all industry professionals in these and related fields.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fossil Energy Update written by and published by . This book was released on 1977 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Responsible Engineering and Living written by David S.-K. Ting and published by Springer Nature. This book was released on 2022-12-02 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the proceedings of the Responsible Engineering and Living 2022 Symposium and Industry Summit. Molière holds each of us accountable when he asserted that, “It is not only for what we do that we are held responsible, but also for what we do not do.” Responsible Engineering and Living 2022 (REAL2022) strived to inspire every individual to practise and foster responsible engineering and living. Its proceedings brings all stakeholders, enthusiasts and experts from academia, industry, policy arenas, and general public, together to discuss challenges, sharpen existing solutions, and formulate novel means to advance responsible engineering and living. This symposium disseminates recent progress and promote collaborations to maximize opportunities for innovative solutions. Topics of interest include resource and energy conservation, waste reduction, nature-friendly engineering and architecture, and sustainable vibrant living.
Download or read book Combustion Phenomena written by Jozef Jarosinski and published by CRC Press. This book was released on 2009-02-12 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively using experimental and numerical illustrations, CombustionPhenomena: Selected Mechanisms of Flame Formation, Propagation, and Extinction provides a comprehensive survey of the fundamental processes of flame formation, propagation, and extinction. Taking you through the stages of combustion, leading experts visually display, mathematically explain, and clearly theorize on important physical topics of combustion. After a historical introduction to the field, they discuss combustion chemistry, flammability limits, and spark ignition. They also study counterflow twin-flame configuration, flame in a vortex core, the propagation characteristics of edge flames, instabilities, and tulip flames. In addition, the book describes flame extinction in narrow channels, global quenching of premixed flames by turbulence, counterflow premixed flame extinction limits, the interaction of flames with fluids in rotating vessels, and turbulent flames. The final chapter explores diffusion flames as well as combustion in spark- and compression-ignition engines. It also examines the transition from deflagration to detonation, along with the detonation wave structure. With downloadable resources of images that beautifully illustrate a range of combustion phenomena, this book facilitates a practical understanding of the processes occurring in the conception, spread, and extinguishment of a flame. It will help you on your way to finding solutions to real issues encountered in transportation, power generation, industrial processes, chemical engineering, and fire and explosion hazards.
Download or read book Research Grants Index written by National Institutes of Health (U.S.). Division of Research Grants and published by . This book was released on 1970 with total page 1404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research Awards Index written by and published by . This book was released on with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biofuels from Lignocellulosic Biomass written by Michael Boot and published by John Wiley & Sons. This book was released on 2016-08-01 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts in combustion technology, this is a unique and refreshing perspective on the current biofuel discussion, presenting the latest research in this important field. The emphasis throughout this reference is on applications, industrial perspectives and economics, focusing on new classes of biofuels such as butanols, levulinates, benzenoids and others. Clearly structured, each chapter presents a new class of biofuel and discusses such topics as production pathways, fuel properties and its impact on engines. The result is a fascinating, user-oriented overview of new classes of biofuels beyond bioethanol.
