Download or read book Investigation of Turbulent Jet Impingement in a Confined Crossflow written by George D. Catalano and published by . This book was released on 1991 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurements and computations are reported for the flow of a turbulent jet discharging into a crossflow confined between two parallel plates. For jet-to-crossflow velocity ratios R equal to 2 and 4, mean and fluctuating velocity components are measured by a laser Doppler anemometer. High order statistics of the streamwise velocity and its time derivative have been measured in the plane of symmetry of a jet in a confined crossflow. The existence of universal similarity of the fine scale structure of a developing turbulent velocity field and the validity of original Kolmogorov local similarity theory and later formulations were investigated. Construction of normalized spectral for energy content, dissipation, and higher order moments enable an examination of the Reynolds number dissipation, and higher order moments enable an examination of the Reynolds number dependence of these functions for the Re sub lamda range from 16 to 800. Estimates of the Kolmogorov constant, mu, ranging from 0.27 to 0.43 were obtained with the arithmetic average equal to 0.38. The fractal dimension of the fine scale structure was estimated from the functional relationship between the flatness of the velocity time derivative and Re sub lambda. For unfiltered data, the fractal dimension was estimated to be 2.45. However, with a + or - 12 sigma bandwidth, the fractal dimension increased to 2. 73.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Impingement Jet Cooling in Gas Turbines written by R.S. Amano and published by WIT Press. This book was released on 2014-05-28 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the requirement for enhanced cooling technologies on modern gas turbine engines, advanced research and development has had to take place in field of thermal engineering. Among the gas turbine cooling technologies, impingement jet cooling is one of the most effective in terms of cooling effectiveness, manufacturability and cost. The chapters contained in this book describe research on state-of-the-art and advanced cooling technologies that have been developed, or that are being researched, with a variety of approaches from theoretical, experimental, and CFD studies. The authors of the chapters have been selected from some of the most active researchers and scientists on the subject. This is the first to book published on the topics of gas turbines and heat transfer to focus on impingement cooling alone.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Hydraulic Resistance written by I. E. Idelchik and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook has been composed on the basis of processing, systematization and classification of the results of a great number of investigations published at different time. The essential part of the book is the outcome of investigations carried out by the author. The present edition of this handbook should assist in increasing the quality and efficiency of the design and usage of indutrial power engineering and other constructions and also of the devices and apparatus through which liquids and gases move.

Download or read book NASA Technical Memorandum written by and published by . This book was released on 1994 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbulent Jets and Plumes written by Joseph Hun-wei Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Jets and plumes are shear flows produced by momentum and buoyancy forces. Examples include smokestack emissions, fires and volcano eruptions, deep sea vents, thermals, sewage discharges, thermal effluents from power stations, and ocean dumping of sludge. Knowledge of turbulent mixing by jets and plumes is important for environmental control, impact and risk assessment. Turbulent Jets and Plumes introduces the fundamental concepts and develops a Lagrangian approach to model these shear flows. This theme persists throughout the text, starting from simple cases and building towards the practically important case of a turbulent buoyant jet in a density-stratified crossflow. Basic ideas are illustrated by ample use of flow visualization using the laser-induced fluorescence technique. The text includes many illustrative worked examples, comparisons of model predictions with laboratory and field data, and classroom tested problems. An interactive PC-based virtual-reality modelling software (VISJET) is also provided. Engineering and science students, researchers and practitioners may use the book both as an introduction to the subject and as a reference in hydraulics and environmental fluid mechanics.

Download or read book Turbulent jets in confined spaces application in mixing ventilation experimental and numerical studies written by Taghi Karimipanah and published by . This book was released on 1996 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tackling Turbulent Flows in Engineering written by Anupam Dewan and published by Springer Science & Business Media. This book was released on 2010-10-23 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emphasis of this book is on engineering aspects of fluid turbulence. The book explains for example how to tackle turbulence in industrial applications. It is useful to several disciplines, such as, mechanical, civil, chemical, aerospace engineers and also to professors, researchers, beginners, under graduates and post graduates. The following issues are emphasized in the book: - Modeling and computations of engineering flows: The author discusses in detail the quantities of interest for engineering turbulent flows and how to select an appropriate turbulence model; Also, a treatment of the selection of appropriate boundary conditions for the CFD simulations is given. - Modeling of turbulent convective heat transfer: This is encountered in several practical situations. It basically needs discussion on issues of treatment of walls and turbulent heat fluxes. - Modeling of buoyancy driven flows, for example, smoke issuing from chimney, pollutant discharge into water bodies, etc

Download or read book ASME Technical Papers written by and published by . This book was released on 2000 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational heat and mass transfer CHMT 2001 Vol I written by and published by Editora E-papers. This book was released on with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Porous Media written by Kambiz Vafai and published by CRC Press. This book was released on 2015-06-23 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Porous Media, Third Edition offers a comprehensive overview of the latest theories on flow, transport, and heat-exchange processes in porous media. It also details sophisticated porous media models which can be used to improve the accuracy of modeling in a variety of practical applications. Featuring contributions from leading experts i

Download or read book Large Eddy Simulation for Compressible Flows written by Eric Garnier and published by Springer Science & Business Media. This book was released on 2009-08-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses both the fundamentals and the practical industrial applications of Large Eddy Simulation (LES) in order to bridge the gap between LES research and the growing need to use it in engineering modeling.

Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1974 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Fluid Dynamics in Food Processing written by Da-Wen Sun and published by CRC Press. This book was released on 2007-05-24 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: The implementation of early-stage simulation tools, specifically computational fluid dynamics (CFD), is an international and interdisciplinary trend that allows engineers to computer-test concepts all the way through the development of a process or system. With the enhancement of computing power and efficiency, and the availability of affordable CF

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Hydraulics and Hydroinformatics written by Jianguo Zhou and published by MDPI. This book was released on 2020-12-29 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue reports on recent research trends in hydraulics, hydrodynamics, and hydroinformatics, and their novel applications in practical engineering. The Issue covers a wide range of topics, including open channel flows, sediment transport dynamics, two-phase flows, flow-induced vibration and water quality. The collected papers provide insight into new developments in physical, mathematical, and numerical modelling of important problems in hydraulics and hydroinformatics, and include demonstrations of the application of such models in water resources engineering.