Download or read book Investigation of Modular FRP Grid Reinforcing Systems with Integral Stay in place Form for Concrete Bridge Decks written by Thomas E. Ringelstetter and published by . This book was released on 2006 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Specification and Design of Fiber Reinforced Bridge Deck Forms for Use on Wide Flange T girders written by and published by . This book was released on 2007 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wide-flanged concrete girders are increasingly being used for highway bridges in Wisconsin. The objective of this research was to understand the state of the art of non-metallic SIP forms and to develop design guidelines and performance specifications that can be used locally for the construction of highway bridge decks. Four major types of stay-in-place (SIP) forms using fiber reinforced concrete (FRC) or fiber reinforced polymer (FRP) materials were investigated: fiber reinforcements, grid reinforcements, bar reinforcements and pultruded profiles. The results were used to develop a model design and construction specification for non-structural, non-metallic, SIP forms in highway bridge decks.
Download or read book Constructability of Reinforcement Free Bridge Deck with Wide Flange Prestressed Precast Concrete Girders written by Colin R. Litow and published by . This book was released on 2008 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of a Deployable Military Bridge System with a Fiberglass Reinforced Concrete Deck written by Joseph Patrick Hanus and published by . This book was released on 2007 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Verification Testing and Design Procedure for FRP Grid Reinforced Concrete Slabs written by Jeffrey J. Brunton and published by . This book was released on 2009 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development of a Specification for Thin Stay in place Forms for Bridge Deck Construction written by Ajaya P. Malla and published by . This book was released on 2007 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modular 3 D FRP Reinforcing System for a Bridge Deck in Fond Du Lac Wisconsin written by Mack J. Conachen and published by . This book was released on 2005 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental and Analytical Study of Fiber Reinforced Polymer FRP Grid reinforced Concrete Bridge Decking written by David A. Jacobson and published by . This book was released on 2004 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge and Highway Structure Rehabilitation and Repair written by Mohiuddin A. Khan and published by McGraw Hill Professional. This book was released on 2010-02-08 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-Art Bridge and Highway Rehabilitation and Repair Methods This authoritative volume offers up-to-date guidance on the latest design techniques, repair methods, specialized software, materials, and advanced maintenance procedures for bridges and highway structures. Focusing on both traditional and nontraditional design issues, Bridge and Highway Structure Rehabilitation and Repair clarifies the most recent AASHTO bridge design codes and discusses new analytical and design methodologies, such as the application of load and resistance factor design (LRFD). A wealth of concise explanations, solved examples, and in-depth case studies are included in this comprehensive resource. COVERAGE INCLUDES: Diagnostic design and selective reconstruction Bridge failure studies and safety engineering Analytical approach to fracture and failure Load and resistance factor rating (LRFR) and redesign Application of LRFD and LRFR methods Inspection and structural health monitoring Bridge widening and replacement strategies Conventional repair methods Advanced repair methods Concrete repair methods Extreme events of flood scour and countermeasures design Guidelines for seismic design and retrofit methods
Download or read book Recommended Guide Specification for the Design of Externally Bonded FRP Systems for Repair and Strengthening of Concrete Bridge Elements written by Abdul-Hamid Zureick and published by Transportation Research Board. This book was released on 2009 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 655: Recommended Guide Specification for the Design of Externally Bonded FRP Systems for Repair and Strengthening of Concrete Bridge Elements examines a recommended guide specification for the design of externally bonded Fiber-Reinforced Polymer (FRP) systems for the repair and strengthening of concrete bridge elements. The report addresses the design requirements for members subjected to different loading conditions including flexure, shear and torsion, and combined axial force and flexure. The recommended guide specification is supplemented by design examples to illustrate its use for different FRP strengthening applications.
Download or read book Ultra high Performance Fiber Reinforced Concrete in Bridge Deck Applications written by Jun Xia and published by . This book was released on 2011 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research presented in this dissertation focuses on the material characterization of ultrahigh performance fiber reinforced concrete (UHP-FRC) at both the microscopic and macroscopic scales. The macroscopic mechanical properties of this material are highly related to the orientation of the steel fibers distributed within the matrix. However, the fiber orientation distribution has been confirmed to be anisotropic based on the flow-casting process. The orientation factor and probability density function (PDF) of the crossing fiber (fibers crossing a cutting plane) orientation was obtained based on theoretical derivations and numerical simulations with respect to different levels of anisotropy and cut planes oriented arbitrarily in space. The level of anisotropy can be calibrated based on image analysis on cut sections from hardened UHP-FRC prisms. Simplified equations provide a framework to predict the mechanical properties based on a single fiber-matrix interaction rule selected from existing theoretical models. Along with the investigation of the impacts from different curing methods and available post-cracking models, a versatile parameterized uniaxial stress-strain constitutive model was developed and calibrated. The constitutive model was implemented in a finite element analysis software program, and the program was utilized in the preliminary design of moveable bridge deck panels made of passively reinforced UHP-FRC. This deck system was among the several alternatives to replace the problematic steel grid decks currently in use. Based on experimental investigations of the deck panels, failure occurred largely in shear rather than flexure during bending tests. However, this shear failure is not abrupt and usually involves large deformation, large sectional rotation, and wide shear cracks before loss of load-carrying capacity. This particular shear failure mode observed was further investigated numerically and experimentally. Three-dimensional FEM models with the ability to reflect the interaction between rebar and concrete were created in a commercial FEM software to investigate the load transfer mechanism before and after bond failure. Small-scale passively reinforced prisms were tested to verify the conclusions drawn from simulation results. In an effort to improve the original design, several shear-strengthened deck panels were tested and evaluated for effectiveness. Finally, methods and equations to predict the ultimate shear capacity were calibrated. A two-dimensional frame element based complete moveable bridge finite element model was built for observation of bridge system performance. The model contained the option to substitute any available deck system based on a subset of pre-calibrated parameters specific to each deck type. These alternative deck systems include an aluminum bridge deck system and a glass fiber reinforced plastic (GFRP) deck system. All three alternatives and the original steel grid deck system were evaluated based on the global responses of the moveable bridge, and the advantages and disadvantages of adopting the UHP-FRC deck system are quantified.
Download or read book Design of FRP Systems for Strengthening Concrete Girders in Shear written by Abdeldjelil Belarbi and published by Transportation Research Board. This book was released on 2011 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 678: Design of FRP Systems for Strengthening Concrete Girders in Shear offers suggested design guidelines for concrete girders strengthened in shear using externally bonded Fiber-Reinforced Polymer (FRP) systems. The guidelines address the strengthening schemes and application of the FRP systems and their contribution to shear capacity of reinforced and prestressed concrete girders. The guidelines are supplemented by design examples to illustrate their use for concrete beams strengthened with different FRP systems. Appendix A of NCHRP Report 678, which contains the research agency's final report, provides further elaboration on the work performed in this project. Appendix A: Research Description and Findings, is only available online.
Download or read book Field Applications of FRP Reinforcement written by S. H. Rizkalla and published by . This book was released on 2003 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: .".. papers presented at the ACI Fall 2003 Convention, in Boston, Massachusetts"--P. iii.
Download or read book Fiber Reinforced Polymer FRP Composites for Infrastructure Applications written by Ravi Jain and published by Springer Science & Business Media. This book was released on 2012-01-02 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This overview examines current issues of fiber reinforced polymer (FRP) composites in civil infrastructure. Part I engages topics related to durability and service life of FRP composites, and how they contribute to sustainability, while Part II highlights implementation and applications.
Download or read book Development of Material Specifications for FRP Structural Elements for the Reinforcing of a Concrete Bridge Deck written by Joshua S. Dietsche and published by . This book was released on 2002 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steel free Hybrid Reinforcement System for Concrete Bridge Decks written by Abdeldjelil Belarbi and published by . This book was released on 2004 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Externally Bonded FRP Reinforcement for RC Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2001-01-01 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: In December 1996, the then CEB established a Task Group with the main objective to elaborate design guidelines for the use of FRP reinforcement in accordance with the design format of the CEB-FIP Model Code and Eurocode2. With the merger of CEB and FIP into fib in 1998, this Task Group became fib TG 9.3 FRP Reinforcement for concrete structures in Commission 9 Reinforcing and Prestressing Materials and Systems. The Task Group consists of about 60 members, representing most European universities, research institutes and industrial companies working in the field of advanced composite reinforcement for concrete structures, as well as corresponding members from Canada, Japan and USA. Meetings are held twice a year and on the research level its work is supported by the EU TMR (European Union Training and Mobility of Researchers) Network "ConFibreCrete”. The work of fib TG 9.3 is performed by five working parties (WP): Material Testing and Characterization (MT&C) Reinforced Concrete (RC) Prestressed Concrete (PC) Externally Bonded Reinforcement (EBR) Marketing and Applications (M&A) This technical report constitutes the work conducted as of to date by the EBR party. This bulletin gives detailed design guidelines on the use of FRP EBR, the practical execution and the quality control, based on the current expertise and state-of-the-art knowledge of the task group members. It is regarded as a progress report since it is not the aim of this report to cover all aspects of RC strengthening with composites. Instead, it focuses on those aspects that form the majority of the design problems. several of the topics presented are subject of ongoing research and development, and the details of some modelling approaches may be subject to future revisions. as knowledge in this field is advancing rapidly, the work of the EBR WP will continue. Inspite of this limit in scope, considerable effort has been made to present a bulletin that is today’s state-of-art in the area of strengthening of concrete structures by means of externally bonded FRP reinforcement.