Download or read book Investigation of Methanol Transport and Reaction Kinetics in Direct Methanol Fuel Cells written by Srikanth Arisetty and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Methanol Fuel Cells (DMFCs) have been demonstrated extensively as electrical power sources for portable applications. In DMFCs, the chemical energy stored in methanol is converted directly to electrical energy through a number of chemical, transport and kinetic processes. The overall efficiency of the DMFC system can be improved by optimizing these processes with precise control over operating conditions. The goal of this research is to evaluate optimal operating conditions and system design for improving the DMFC's electrical performance through a combination of experimental strategies and process models. A DMFC system incorporating metal foams as the flow field was designed to increase system efficiency. The influence of metal foam parameters and operating conditions on fuel cell performance was investigated. Our results indicated that due to the opposing effects of methanol concentration on anode and cathode kinetics, there exists an optimal value of methanol concentration at each current density that will yield the highest electrical performance. A control algorithm employing feedback from the fuel cell voltage was implemented to dynamically adjust the methanol feed concentration for peak DMFC performance. Additionally, water and methanol crossover fluxes across the membrane were also measured to understand their transport rates under different conditions. The physico-chemical processes in DMFCs were investigated by developing an accurate mathematical model coupling mass transport with reaction kinetics within the five-layer membrane electrode assembly of the DMFC. An experimental scheme was developed to measure the overpotential contributions of anode methanol oxidation, cathode oxygen reduction and cathode methanol oxidation. Subsequently, the kinetic constants for these three reactions are characterized for various catalyst loadings. The model predicted that methanol undergoes electrochemical adsorption on the Pt/C cathode catalyst layer, followed by both electrochemical and chemical oxidation. The overpotential loss due to methanol oxidation on the cathode with 2 mg/cm 2 catalyst loading is as large as 80 mV at 20 mA/cm 2 . Our model indicated that most of the methanol adsorbed on the cathode catalyst undergoes purely chemical oxidation with oxygen and causes mass transport limitations for oxygen electro-reduction. We also found that the transport of methanol to the anode catalyst layer was significantly enhanced by the convection of CO 2 bubbles towards the flow field. This model should prove useful in optimizing the supply rates of methanol and oxygen in DMFCs.
Download or read book Direct Methanol Fuel Cell Technology written by Kingshuk Dutta and published by Elsevier. This book was released on 2020-02-25 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Methanol Fuel Cell Technology presents the overall progress witnessed in the field of DMFC over the past decade, highlighting the components, materials, functions, properties and features, designs and configurations, operations, modelling, applications, pros and cons, social, political and market penetration, economics and future directions. The book discusses every single aspect of DMFC device technology, the associated advantages and drawbacks of state-of-the-art materials and design, market opportunities and commercialization aspects, and possible future directions of research and development. This book, containing critical analyses and opinions from experts around the world, will garner considerable interest among actual users/scientists/experts. Analyzes developments of membrane electrolytes, electrodes, catalysts, catalyst supports, bipolar plates, gas diffusion layers and flow channels as critical components of direct methanol fuel cells Includes modeling of direct methanol fuel cells to understand their scaling up potentials Discusses commercial aspects of direct methanol fuel cells in terms of market penetration, end application, cost, viability, reliability, social and commercial perception, drawbacks and prospects
Download or read book Direct Alcohol Fuel Cells for Portable Applications written by Alexandra M. F. R. Pinto and published by Academic Press. This book was released on 2018-09-08 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Alcohol Fuel Cells for Portable Applications: Fundamentals, Engineering and Advances presents the fundamental concepts, technological advances and challenges in developing, modeling and deploying fuel cells and fuel cell systems for portable devices, including micro and mini fuel cells. The authors review the fundamental science of direct alcohol fuel cells, covering, in detail, thermodynamics, electrode kinetics and electrocatalysis of charge-transfer reactions, mass and heat transfer phenomena, and basic modeling aspects. In addition, the book examines other fuels in DAFCs, such as formic acid, ethylene glycol and glycerol, along with technological aspects and applications, including case studies and cost analysis. Researchers, engineering professionals, fuel cell developers, policymakers and senior graduate students will find this a valuable resource. The book’s comprehensive coverage of fundamentals is especially useful for graduate students, advanced undergraduate students and those new to the field. Provides a comprehensive understanding of the fundamentals of DAFCs and their basic components, design and performance Presents current and complete information on the state-of-the-art of DAFC technology and its most relevant challenges for commercial deployment Includes practical application examples, problems and case studies Covers the use of other fuels, such as formic acid, ethylene glycol and glycerol
Download or read book Electrode Kinetics and Species Transport in Direct Oxidation Methanol Fuel Cells written by Pertti S. Kauranen and published by . This book was released on 1996 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Electrolyte Membrane and Direct Methanol Fuel Cell Technology written by Christoph Hartnig and published by Elsevier. This book was released on 2012-02-20 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs) technology are promising forms of low-temperature electrochemical power conversion technologies that operate on hydrogen and methanol respectively. Featuring high electrical efficiency and low operational emissions, they have attracted intense worldwide commercialization research and development efforts. These R&D efforts include a major drive towards improving materials performance, fuel cell operation and durability. In situ characterization is essential to improving performance and extending operational lifetime through providing information necessary to understand how fuel cell materials perform under operational loads. Polymer Electrolyte Membrane and Direct Methanol Fuel Cell Technology, Volume 2 details in situ characterization, including experimental and innovative techniques, used to understand fuel cell operational issues and materials performance. Part I reviews enhanced techniques for characterization of catalyst activities and processes, such as X-ray absorption and scattering, advanced microscopy and electrochemical mass spectrometry. Part II reviews characterization techniques for water and fuel management, including neutron radiography and tomography, magnetic resonance imaging and Raman spectroscopy. Finally, Part III focuses on locally resolved characterization methods, from transient techniques and electrochemical microscopy, to laser-optical methods and synchrotron radiography. With its international team of expert contributors, Polymer electrolyte membrane and direct methanol fuel cell technology will be an invaluable reference for low temperature fuel cell designers and manufacturers, as well as materials science and electrochemistry researchers and academics. Polymer electrolyte membrane and direct methanol fuel cell technology is an invaluable reference for low temperature fuel cell designers and manufacturers, as well as materials science and electrochemistry researchers and academics. Details in situ characterisation of polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs), including the experimental and innovative techniques used to understand fuel cell operational issues and materials performance Examines enhanced techniques for characterisation of catalyst activities and processes, such as X-ray absorption and scattering, advanced microscopy and electrochemical mass spectrometry Reviews characterisation techniques for water and fuel management, including neutron radiography and tomography, and comprehensively covers locally resolved characterisation methods, from transient techniques to laser-optical methods
Download or read book Methanol Fuel in Transportation Sector and Fuel Cells written by Lindiwe Khotseng and published by BoD – Books on Demand. This book was released on 2024-07-03 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of methanol fuel. It reviews challenges and solutions in using methanol fuel in the transportation sector. Methanol is also used as the fuel in direct methanol fuel cells (DMFCs), and thus, the book reviews their working principles, performance, challenges, solutions, and applications. It also explores new developments in anode and cathode electrocatalysts, with an emphasis on nanostructured carbon support materials and their structure, electrochemical properties, and performance.
Download or read book Polymer Electrolyte Membrane and Direct Methanol Fuel Cell Technology written by Christoph Hartnig and published by Elsevier. This book was released on 2012-03-19 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs) technology are promising forms of low-temperature electrochemical power conversion technologies that operate on hydrogen and methanol respectively. Featuring high electrical efficiency and low operational emissions, they have attracted intense worldwide commercialization research and development efforts. These R&D efforts include a major drive towards improving materials performance, fuel cell operation and durability. In situ characterization is essential to improving performance and extending operational lifetime through providing information necessary to understand how fuel cell materials perform under operational loads.This two volume set reviews the fundamentals, performance, and in situ characterization of PEMFCs and DMFCs. Volume 1 covers the fundamental science and engineering of these low temperature fuel cells, focusing on understanding and improving performance and operation. Part one reviews systems fundamentals, ranging from fuels and fuel processing, to the development of membrane and catalyst materials and technology, and gas diffusion media and flowfields, as well as life cycle aspects and modelling approaches. Part two details performance issues relevant to fuel cell operation and durability, such as catalyst ageing, materials degradation and durability testing, and goes on to review advanced transport simulation approaches, degradation modelling and experimental monitoring techniques.With its international team of expert contributors, Polymer electrolyte membrane and direct methanol fuel cell technology Volumes 1 & 2 is an invaluable reference for low temperature fuel cell designers and manufacturers, as well as materials science and electrochemistry researchers and academics. Covers the fundamental science and engineering of polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs), focusing on understanding and improving performance and operation Reviews systems fundamentals, ranging from fuels and fuel processing, to the development of membrane and catalyst materials and technology, and gas diffusion media and flowfields, as well as life cycle aspects and modelling approaches Details performance issues relevant to fuel cell operation and durability, such as catalyst ageing, materials degradation and durability testing, and reviews advanced transport simulation approaches, degradation modelling and experimental monitoring techniques
Download or read book Fuel Cell Engineering written by and published by Academic Press. This book was released on 2012-08-14 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cells are attractive electrochemical energy converters featuring potentially very high thermodynamic efficiency factors. The focus of this volume of Advances in Chemical Engineering is on quantitative approaches, particularly based on chemical engineering principles, to analyze, control and optimize the steady state and dynamic behavior of low and high temperature fuel cells (PEMFC, DMFC, SOFC) to be applied in mobile and stationary systems. Updates and informs the reader on the latest research findings using original reviews Written by leading industry experts and scholars Reviews and analyzes developments in the field
Download or read book Direct Alcohol Fuel Cells written by Horacio R. Corti and published by Springer Science & Business Media. This book was released on 2013-12-02 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Alcohol Fuel Cells: Materials, Performance, Durability and Applications begins with an introductory overview of direct alcohol fuel cells (DAFC); it focuses on the main goals and challenges in the areas of materials development, performance, and commercialization. The preparation and the properties of the anodic catalysts used for the oxidation of methanol, higher alcohols, and alcohol tolerant cathodes are then described. The membranes used as proton conductors in DAFC are examined, as well as alkaline membranes, focusing on the electrical conductivity and alcohol permeability. The use of different kinds of carbon materials as catalyst supports, gas diffusion layers, and current collectors in DAFC is also discussed. State of the art of the modeling is used to estimate performance and durability. The closing chapter reviews the use of DAFC in portable equipment and mobile devices and features a detailed discussion on the mechanisms of component degradation which limits their durability. This book is written to facilitate the understanding of DAFC technology, applications, and future challenges. It is an excellent introduction for electrochemical and material engineers interested in small fuel cells as portable energy sources, scientists focused on materials science for energy production and storage, as well as policy-makers in the area of renewable energies.
Download or read book Kinetic and Mechanistic Investigation of Methanol Oxidation and Membrane degradation for Direct Methanol Fuel Cells written by Guoyan Hou and published by . This book was released on 2006 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this dissertation three topics were studied: CO tolerance of Pt and PtRu alloy; methanol oxidation on Pt and PtRu electrodes; the membrane degradation in polymer electrolyte fuel cells.
Download or read book Proceedings of the Workshop on Direct Methanol Air Fuel Cells written by Albert R. Landgrebe and published by . This book was released on 1992 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Direct Methanol Fuel Cells written by Antonio Salvatore Aricò and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with an analysis of materials issues, status of technologies and potential applications of direct methanol fuel cells. The principle of operation of direct methanol fuel cells and the status of knowledge in the basic research areas are presented. The technology of direct methanol fuel cells is discussed in this book with particular regard to fabrication methodologies for the manufacturing of catalysts, electrolytes membrane-electrode assemblies, stack hardware and system design.
Download or read book Methanol written by Angelo Basile and published by Elsevier. This book was released on 2017-10-31 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methanol: Science and Engineering provides a comprehensive review of the chemistry, properties, and current and potential uses and applications of methanol. Divided into four parts, the book begins with a detailed account of current production methods and their economics. The second part deals with the applications of methanol, providing useful insights into future applications. Modeling of the various reactor systems is covered in the next section, with final discussions in the book focusing on the economic and environmental impact of this chemical. Users will find this to be a must-have resource for all researchers and engineers studying alternative energy sources. Provides the latest developments on methanol research Reviews methanol production methods and their economics Outlines the use of methanol as an alternative green transportation fuel Includes new technologies and many new applications of methanol
Download or read book Advances in Fuel Cells written by and published by Elsevier. This book was released on 2007-04-23 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cells have been recognized to be destined to form the cornerstone of energy technologies in the twenty-first century. The rapid advances in fuel cell system development have left current information available only in scattered journals and Internet sites. Advances in Fuel Cells fills the information gap between regularly scheduled journals and university level textbooks by providing in-depth coverage over a broad scope. The present volume provides informative chapters on thermodynamic performance of fuel cells, macroscopic modeling of polymer-electrolyte membranes, the prospects for phosphonated polymers as proton-exchange fuel cell membranes, polymer electrolyte membranes for direct methanol fuel cells, materials for state of the art PEM fuel cells, and their suitability for operation above 100°C, analytical modelling of direct methanol fuel cells, and methanol reforming processes. Includes contributions by leading experts working in both academic and industrial R&D Disseminates the latest research discoveries A valuable resource for senior undergraduates and graduate students, it provides in-depth coverage over a broad scope
Download or read book Mini Micro Fuel Cells written by S. Kakaç and published by Springer Science & Business Media. This book was released on 2008-04-10 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains an archival record of the NATO Advanced Institute on Mini – Micro Fuel Cells – Fundamental and Applications held in Çesme – Izmir, Turkey, July 22–August 3, 2007. The ASIs are intended to be a high-level teaching activity in scientific and technical areas of current concern. In this volume, the reader may find interesting chapters on Mini- Micro Fuel Cells with fundamentals and applications. In recent years, fu- cell development, modeling and performance analysis has received much attention due to their potential for distributed power which is a critical issue for energy security and the environmental protection. Small fuel cells for portable applications are important for the security. The portable devices (many electronic and wireless) operated by fuel cells for providing all-day power, are very valuable for the security, for defense and in the war against terrorism. Many companies in NATO and non-NATO countries have concentrated to promote the fuel cell industry. Many universities with industrial partners committed to the idea of working together to develop fuel cells. As tech- logy advanced in the 1980s and beyond, many government organizations joined in spending money on fuel-cell research. In recent years, interest in using fuel cells to power portable electronic devices and other small equipment (cell phones, mobile phones, lab-tops, they are used as micro power source in biological applications) has increased partly due to the promise of fuel cells having higher energy density.
Download or read book Direct Liquid Fuel Cells written by Ramiz Gültekin Akay and published by Academic Press. This book was released on 2020-09-28 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Liquid Fuel Cells is a comprehensive overview of the fundamentals and specificities of the use of methanol, ethanol, glycerol, formic acid and formate, dimethyl ether, borohydride, hydrazine and other promising liquid fuels in fuel cells. Each chapter covers a different liquid fuel-based fuel cell such as: Anode catalysts of direct methanol fuel cells (DMFCs), future system designs and future trends for direct ethanol fuel cells (DEFCs), development of catalysts for direct glycerol fuel cells (DGFCs), the mechanisms of the reactions taking place at the anode and cathode electrodes, and the reported anode catalysts for direct formic acid fuel cell (DFAFC) and direct formate fuel cell (DFFC), characteristics of direct dimethyl ether fuel cell (DDMEFC), including its electrochemical and operating systems and design, the developments in direct borohydride fuel cells, the development of catalysts for direct hydrazine fuel cells (DHFCs), and also the uncommonly used liquids that have a potential for fuel cell applications including 2-propanol, ethylene glycol, ascorbic acid and ascorbate studied in the literature as well as utilization of some blended fuels. In each part, the most recent literature is reviewed and the state of the art is presented. It also includes examples of practical problems with solutions and a summarized comparison of performance, advantages, and limitations of each type of fuel cell discussed. Direct Liquid Fuel Cells is not a typical textbook but rather designed as a reference book of which any level of students (undergraduate or graduate), instructors, field specialists, industry and general audience, who benefit from current and complete understanding of the many aspects involved in the development and operation of these types of fuel cells, could make use of any chapter when necessary. Presents information on different types of direct liquid fuel cells. Explores information under each section, for specific fuel-based fuel cells in more detail in terms of the materials used. Covers three main sections: direct alcohol, organic fuel-based and inorganic fuel-based fuel cells
Download or read book Direct Methanol Fuel Cells written by Electrochemical Society. Energy Technology Division and published by . This book was released on 2001 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Energy Technology, Physical Electrochemistry and Battery Divisions."
