Download or read book Emerging Topics in Heat Transfer written by Qiuwang Wang and published by WIT Press. This book was released on 2013-11-06 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in ten edited chapters this book encompasses important emerging topics in heat transfer equipment, particularly heat exchangers. The chapters have all been selected by invitation only. Advances in high temperature equipment and small scale devices continue to be important as the involved heat transfer and related phenomena are often complex in nature and different mechanisms like heat conduction, convection, turbulence, thermal radiation and phase change as well as chemical reactions may occur simultaneously. The book treats various operating problems, like fouling, and highlights applications in heat exchangers and gas turbine cooling. In engineering design and development, reliable and accurate computational methods are required to replace or complement expensive and time consuming experimental trial and error work. Tremendous advancements in knowledge and competence have been achieved during recent years due to improved computational solution methods for non-linear partial differential equations, turbulence modelling advancement and developments of computers and computing algorithms to achieve efficient and rapid simulations. The chapters of the book thoroughly present such advancement in a variety of applications.
Download or read book Paper written by and published by . This book was released on 2000 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASME Technical Papers written by and published by . This book was released on 2000 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Heat Transfer written by and published by . This book was released on 2008 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer Enhancement in Externally Finned Tubes and Internally Finned Tubes and Annuli written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-07-26 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief deals with externally finned tubes, their geometric parameters, Reynolds number, dimensionless variables, friction factor, plain plate fins on round tubes, the effect of fin spacing, correlations, pain individually finned tubes, circular fins with staggered tubes, low integral fin tubes, wavy fin, enhanced plate fin geometries with round tubes, Offset Strip Fins, convex louver fins, louvered fin, perforated fin, mesh fin, vortex generator, enhanced circular fin geometries, spine or segmented fin, wire loop fin, flat extruded tubes with internal membranes, plate and fin automotive radiators, performance comparison, numerical simulation, advanced fin geometries, hydrophilic coatings, internally finned tubes and annuli, spirally fluted and indented tube, advanced internal fin geometries, and finned annuli. The book is ideal for professionals and researchers dealing with thermal management in devices.
Download or read book Gas Turbine Heat Transfer and Cooling Technology Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.
Download or read book Introduction to Heat Transfer written by Bengt Sundén and published by WIT Press. This book was released on 2012 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the basic mechanisms for transfer of heat, this book gives a deeper and more comprehensive view than existing titles on the subject. Derivation and presentation of analytical and empirical methods are provided for calculation of heat transfer rates and temperature fields as well as pressure drop. The book covers thermal conduction, forced and natural laminar and turbulent convective heat transfer, thermal radiation including participating media, condensation, evaporation and heat exchangers. This book is aimed to be used in both undergraduate and graduate courses in heat transfer and thermal engineering. It can successfully be used in R & D work and thermal engineering design in industry and by consultancy firms
Download or read book Proceedings of the ASME Turbo Expo 2002 Presented at the 2002 ASME Turbo Expo June 3 6 2002 Amsterdam the Netherlands written by and published by . This book was released on 2002 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is Volume 1 of five volumes that comprise the proceedings of the June 2002 conference, sponsored by the International Gas Turbine Institute (IGTI), a technical institute of the American Society of Mechanical Engineers. The purpose of the conference was to facilitate international exchange and development of educational and technical information related to the design, application, manufacture, operation, maintenance, and environmental impact of all types of gas engines. With an emphasis upon the need for more efficient, cleaner, and more reliable gas turbines, the approximately 130 articles cover various technical aspects of aircraft engines; coal, biomass, and alternative fuels; combustion and fuels; education; electric power; and vehicular and small turbomachines. There is no subject index. Annotation c. Book News, Inc., Portland, OR (booknews.com).
Download or read book Proceedings of the ASME Heat Transfer Division written by and published by . This book was released on 2002 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer in Gas Turbines written by Bengt Sundén and published by Witpress. This book was released on 2001 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title presents and reflects current active research on various heat transfer topics and related phenomena in gas turbine systems. It begins with a general introduction to gas turbine heat transfer, before moving on to specific areas.
Download or read book AIAA Journal written by American Institute of Aeronautics and Astronautics and published by . This book was released on 2003 with total page 1252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Insert Devices and Integral Roughness in Heat Transfer Enhancement written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-07-08 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief describes heat transfer and pressure drop in heat transfer enhancement by insert devices and integral roughness. The authors deal with twisted-tape insert laminar and turbulent flow in tubes and annuli in smooth tubes and rough tubes, segmented twisted-tape inserts, displaced enhancement devices, wire coil inserts, extended surface inserts and tangential injection devices. The articles also address transverse and helical integral rib roughness, corrugated tube roughness, 3D and 2D roughness, rod bundles, outside roughness for cross flow, non-circular channels, Reynolds analogy and similarity law, numerical simulation and predictive models. The book is ideal for professionals and researchers working with thermal management in devices.
Download or read book Issues in Mechanical Engineering 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 2526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Mechanical Engineering / 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Mechanical Engineering. The editors have built Issues in Mechanical Engineering: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Mechanical Engineering in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Mechanical Engineering: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Proceedings of the ASME Turbo Expo written by and published by . This book was released on 2006 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1994 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Thermophysics and Heat Transfer written by and published by . This book was released on 2006 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: This journal is devoted to the advancement of the science and technology of thermophysics and heat transfer through the dissemination of original research papers disclosing new technical knowledge and exploratory developments and applications based on new knowledge. It publishes papers that deal with the properties and mechanisms involved in thermal energy transfer and storage in gases, liquids, and solids or combinations thereof. These studies include conductive, convective, and radiative modes alone or in combination and the effects of the environment.
Download or read book Advances in Thermal Engineering written by Gautam Choubey and published by Springer Nature. This book was released on with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt:
