Download or read book Investigation of Coupled Thermo chemo mechanical Processes for Safe Carbon Geological Storage written by Hojung Jung and published by . This book was released on 2018 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safe and permanent CO2 storage in geological formations requires reservoir geomechanical stability. Injection of CO2 into the subsurface changes the local pore pressure and, further, alters the effective stresses due to poro-thermo-chemo-mechanical coupled responses. Changes of pore pressure and effective stress may disrupt the host formation mechanical equilibrium. This alteration may result in geomechanical failure events such as fault reactivation and hydraulic fracturing. Such events can favor fluid migration paths for injected CO2, induce seismic activity, and cause surface uplift. Examples of field observations during CO2 injection include: (1) surface uplift at the In Salah project in Algeria, (2) absence if bottom-hole pressure (BHP) increase during injection in Cranfield, Mississippi, and (3) induced seismicity with magnitude M>1 in Decatur, Illinois. In this context, accurate estimations of pore pressure build up and local stress alteration induced by CO2 injection are critical to avoid geomechanical perturbations. However, current models and predictions often assume relatively homogeneous reservoirs without taking into account compositional behavior. Further, the effects of temperature and chemical reactions have not been rigorously incorporated into the interpretation of local stress alteration and the well response to CO2 injection. This dissertation shows geomechanical analyses of CO2 geological sequestrations by three field case studies: Frio CO2 sequestration pilot test in Texas, Cranfield CO2 sequestration in Mississippi, and Crystal Geyser in Utah. Both Frio and Cranfield case studies are studied with the help of reservoir simulation and history matching of field data including assimilation of vertical heterogeneity from well-logging analysis and calibration with laboratory experiments. The Frio case study focuses on examination of reservoir capacity of a compartmentalized volume to avert fault reactivation. The Cranfield case study analyzes the influence of thermo-chemo-elastic processes on wellbore fracturing induced by CO2 injection. The Crystal Geyser case study investigates the long-term chemical effects of CO2-charged brine on rock mechanical properties through analyses and measurements on rock samples from the field, where a natural CO2 leakage analog exists. The following conclusions are a result of this dissertation. CO2 dissolution into brine reduces pore pressure build up significantly in small and compartmentalized reservoirs. Thermo-elastic and chemo-elastic effects alter local stresses and may trigger injector fracturing at bottom-hole pressures lower than expected. Capturing phase behavior, coupled thermo-chemo-mechanical processes, and reservoir heterogeneity are important factors to estimate reservoir capacity and prevent geomechanical perturbations

Download or read book Investigation of Coupled Chemo hydro mechanical Processes with Discrete Element Modeling written by Zhuang Sun and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geological storage of CO2 is proposed as a near-term economically viable approach to mitigate CO2 emissions, and is an example of the coupled chemo-hydro-mechanical processes. Although CO2 injection and enhanced oil recovery are viewed as mature technologies in the oil and gas industry, investigation of all possible implications is necessary for secure and effective long-term CO2 storage. The injection of a large volume of CO2 into target storage formations is usually associated with a number of geomechanical processes that are initiated at the pore scale. Therefore, a pore-scale geomechanical model, i.e. Discrete Element Method (DEM), is of great importance to better understand the underlying pore-scale processes and mechanisms that govern the large-scale CO2 geological storage. In this work, we concentrate on several significant pore-scale coupled phenomena. Firstly, CO2 injection into geological formations involves chemo-mechanical processes and shifts the geochemical equilibrium between the minerals and resident brine, which subsequently induces mineral-brine-CO2 reactions and affects CO2 storage mechanical integrity. We utilize a numerical model that couples the Discrete Element Method (DEM) and the Bonded-Particle Model (BPM) to perform simulations on synthetic rocks that mimic tested rock samples. Numerical results, in agreement with experimental evidence, show that both cement and particle dissolution significantly contribute to rock weakening in sandstones with carbonate/hematite cements and pore-filling carbonate. Secondly, reservoir compaction involves hydro-mechanical processes that induce changes in porosity and permeability, and is a significant concern for the oil and gas production. We develop a grain crushing model based on the DEM to investigate the changes in porosity and permeability under the reservoir stress path. Grain crushing is shown to be the dominant mechanism for significant changes in porosity and permeability under a high effective stress. Samples consisting of large and soft grains tend to be more readily compacted. Finally, fluid injection in the subsurface may induce fractures and is another common hydro-mechanical process. We couple the Discrete Element Method (DEM) to solve for the mechanics of a solid granular medium and the Computational Fluid Dynamics (CFD) to model fluid flow and drag forces. We validate the resolved CFD-DEM numerical model against experiments from the literature and investigate the impact of physical properties and injection parameters. This work reveals how the pore-scale processes contribute to fluid-driven fracture initiation

Download or read book Multilevel Modeling of Secure Systems in QoP ML written by Bogdan Księżopolski and published by CRC Press. This book was released on 2015-07-02 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing the Quality of Protection Modeling Language (QoP-ML), this book provides for the abstraction of security systems while maintaining emphasis on the details of quality protection . It delineates the steps used in cryptographic protocol and introduces a multilevel protocol analysis that expands current understanding. Every operation defined by QoP-ML is described within parameters of security metrics, therefore evaluating the impact of the operation on the entire system's security.

Download or read book Science of Carbon Storage in Deep Saline Formations written by Pania Newell and published by Elsevier. This book was released on 2018-09-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science of Carbon Storage in Deep Saline Formations: Process Coupling across Time and Spatial Scales summarizes state-of-the-art research, emphasizing how the coupling of physical and chemical processes as subsurface systems re-equilibrate during and after the injection of CO2. In addition, it addresses, in an easy-to-follow way, the lack of knowledge in understanding the coupled processes related to fluid flow, geomechanics and geochemistry over time and spatial scales. The book uniquely highlights process coupling and process interplay across time and spatial scales that are relevant to geological carbon storage.

Download or read book Thermo Hydro Mechanical Chemical Processes in Fractured Porous Media Modelling and Benchmarking written by Olaf Kolditz and published by Springer. This book was released on 2014-11-26 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book provides guidance to understanding complicated coupled processes based on the experimental data available and implementation of developed algorithms in numerical codes. Results of selected test cases in the fields of closed-form solutions (e.g., deformation processes), single processes (such as groundwater flow) as well as coupled processes are presented. It is part of the OpenGeoSys initiative - an open source project to share knowledge and experience in environmental analysis and scientific computation with the community.

Download or read book Geological Carbon Storage written by Stéphanie Vialle and published by John Wiley & Sons. This book was released on 2018-11-15 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geological Carbon Storage Subsurface Seals and Caprock Integrity Seals and caprocks are an essential component of subsurface hydrogeological systems, guiding the movement and entrapment of hydrocarbon and other fluids. Geological Carbon Storage: Subsurface Seals and Caprock Integrity offers a survey of the wealth of recent scientific work on caprock integrity with a focus on the geological controls of permanent and safe carbon dioxide storage, and the commercial deployment of geological carbon storage. Volume highlights include: Low-permeability rock characterization from the pore scale to the core scale Flow and transport properties of low-permeability rocks Fundamentals of fracture generation, self-healing, and permeability Coupled geochemical, transport and geomechanical processes in caprock Analysis of caprock behavior from natural analogues Geochemical and geophysical monitoring techniques of caprock failure and integrity Potential environmental impacts of carbon dioxide migration on groundwater resources Carbon dioxide leakage mitigation and remediation techniques Geological Carbon Storage: Subsurface Seals and Caprock Integrity is an invaluable resource for geoscientists from academic and research institutions with interests in energy and environment-related problems, as well as professionals in the field. Book Review: William R. Green, Patrick Taylor, Sven Treitel, and Moritz Fliedner, (2020), "Reviews," The Leading Edge 39: 214–216 Geological Carbon Storage: Subsurface Seals and Caprock Integrity, edited by Stéphanie Vialle, Jonathan Ajo-Franklin, and J. William Carey, ISBN 978-1-119-11864-0, 2018, American Geophysical Union and Wiley, 364 p., US$199.95 (print), US$159.99 (eBook). This volume is a part of the AGU/Wiley Geophysical Monograph Series. The editors assembled an international team of earth scientists who present a comprehensive approach to the major problem of placing unwanted and/or hazardous fluids beneath a cap rock seal to be impounded. The compact and informative preface depicts the nature of cap rocks and the problems that may occur over time or with a change in the formation of the cap rock. I have excerpted a quote from the preface that describes the scope of the volume in a concise and thorough matter. “Caprocks can be defined as a rock that prevents the flow of a given fluid at certain temperature, pressure, and chemical conditions. ... A fundamental understanding of these units and of their evolution over time in the context of subsurface carbon storage is still lacking.” This volume describes the scope of current research being conducted on a global scale, with 31 of the 83 authors working outside of the United States. The studies vary but can be generalized as monitoring techniques for cap rock integrity and the consequence of the loss of that integrity. The preface ends by calling out important problems that remain to be answered. These include imaging cap rocks in situ, detecting subsurface leaks before they reach the surface, and remotely examining the state of the cap rock to avert any problems. Chapter 3 describes how newer methods are used to classify shale. These advanced techniques reveal previously unknown microscopic properties that complicate classification. This is an example of the more we know, the more we don't know. A sedimentologic study of the formation of shale (by far the major sedimentary rock and an important rock type) is described in Chapter 4. The authors use diagrammatic examples to illustrate how cap rocks may fail through imperfect seal between the drill and wall rock, capillary action, or a structural defect (fault). Also, the shale pore structures vary in size, and this affects the reservoir. There are descriptions of the pore structure in the Eagle Ford and Marcellus shales and several others. Pore structures are analyzed using state-of-the-art ultra-small-angle X-ray or neutron scattering. They determine that the overall porosity decreases nonlinearly with time. There are examples of cap rock performance under an array of diagnostic laboratory analyses and geologic field examples (e.g., Marcellus Formation). The importance of the sequestration of CO2 and other contaminants highlights the significance of this volume. The previous and following chapters illuminate the life history of the lithologic reservoir seal. I would like to call out Chapter 14 in which the authors illustrate the various mechanisms by which a seal can fail and Chapter 15 in which the authors address the general problems of the effect of CO2 sequestration on the environment. They establish a field test, consisting of a trailer and large tank of fluids with numerous monitoring instruments to replicate the effect of a controlled release of CO2-saturated water into a shallow aquifer. This chapter's extensive list of references will be of interest to petroleum engineers, rock mechanics, and environmentalists. The authors of this volume present a broad view of the underground storage of CO2. Nuclear waste and hydrocarbons are also considered for underground storage. There are laboratory, field, and in situ studies covering nearly all aspects of this problem. I cannot remember a study in which so many different earth science resources were applied to a single problem. The span of subjects varies from traditional geochemical analysis with the standard and latest methods in infrared and X-ray techniques, chemical and petroleum engineering, sedimentary mineralogy, hydrology, and geomechanical studies. This volume is essential to anyone working in this field as it brings several disciplines together to produce a comprehensive study of carbon sequestration. While the volume is well illustrated, there is a lack of color figures. Each chapter should have at least two color figures, or there should be several pages of color figures bound in the center of the volume. Many of the figures would be more meaningful if they had been rendered in color. Also, the acronyms are defined in the individual chapters, but it would be helpful to have a list of acronyms after the extensive index. I recommend this monograph to all earth scientists but especially petroleum engineers, structural geologists, mineralogists, and environmental scientists. Since these chapters cover a broad range of studies, it would be best if the reader has a broad background. — Patrick Taylor Davidsonville, Maryland

Download or read book Energy Geotechnics written by Alessio Ferrari and published by Springer. This book was released on 2018-08-23 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects selected full papers presented at the International Symposium on Energy Geotechnics 2018 (SEG-2018), held on 25th – 28th September 2018, at the Swiss Federal Institute of Technology in Lausanne (EPFL). It covers a wide range of topics in energy geotechnics, including energy geostructures, energy geostorage, thermo-hydro-chemo-mechanical behaviour of geomaterials, unconventional resources, hydraulic stimulation, induced seismicity, CO2 geological storage, and nuclear waste disposal as well as topics such as tower and offshore foundations. The book is intended for postgraduate students, researchers and practitioners working on geomechanics and geotechnical engineering for energy-related applications.

Download or read book Rock Characterisation Modelling and Engineering Design Methods written by Xia-Ting Feng and published by CRC Press. This book was released on 2013-05-17 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Characterisation, Modelling and Engineering Design Methods contains the contributions presented at the 3rd ISRM SINOROCK Symposium (Shanghai, China, 1820 June 2013). The papers contribute to the further development of the overall rock engineering design process through the sequential linkage of the three themes of rock characterisation, model

Download or read book Embedded Discrete Fracture Modeling and Application in Reservoir Simulation written by Kamy Sepehrnoori and published by Elsevier. This book was released on 2020-08-27 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of naturally fractured reservoirs, especially shale gas and tight oil reservoirs, exploded in recent years due to advanced drilling and fracturing techniques. However, complex fracture geometries such as irregular fracture networks and non-planar fractures are often generated, especially in the presence of natural fractures. Accurate modelling of production from reservoirs with such geometries is challenging. Therefore, Embedded Discrete Fracture Modeling and Application in Reservoir Simulation demonstrates how production from reservoirs with complex fracture geometries can be modelled efficiently and effectively. This volume presents a conventional numerical model to handle simple and complex fractures using local grid refinement (LGR) and unstructured gridding. Moreover, it introduces an Embedded Discrete Fracture Model (EDFM) to efficiently deal with complex fractures by dividing the fractures into segments using matrix cell boundaries and creating non-neighboring connections (NNCs). A basic EDFM approach using Cartesian grids and advanced EDFM approach using Corner point and unstructured grids will be covered. Embedded Discrete Fracture Modeling and Application in Reservoir Simulation is an essential reference for anyone interested in performing reservoir simulation of conventional and unconventional fractured reservoirs. Highlights the current state-of-the-art in reservoir simulation of unconventional reservoirs Offers understanding of the impacts of key reservoir properties and complex fractures on well performance Provides case studies to show how to use the EDFM method for different needs

Download or read book Characterization Modeling Monitoring and Remediation of Fractured Rock written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2021-01-29 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractured rock is the host or foundation for innumerable engineered structures related to energy, water, waste, and transportation. Characterizing, modeling, and monitoring fractured rock sites is critical to the functioning of those infrastructure, as well as to optimizing resource recovery and contaminant management. Characterization, Modeling, Monitoring, and Remediation of Fractured Rock examines the state of practice and state of art in the characterization of fractured rock and the chemical and biological processes related to subsurface contaminant fate and transport. This report examines new developments, knowledge, and approaches to engineering at fractured rock sites since the publication of the 1996 National Research Council report Rock Fractures and Fluid Flow: Contemporary Understanding and Fluid Flow. Fundamental understanding of the physical nature of fractured rock has changed little since 1996, but many new characterization tools have been developed, and there is now greater appreciation for the importance of chemical and biological processes that can occur in the fractured rock environment. The findings of Characterization, Modeling, Monitoring, and Remediation of Fractured Rock can be applied to all types of engineered infrastructure, but especially to engineered repositories for buried or stored waste and to fractured rock sites that have been contaminated as a result of past disposal or other practices. The recommendations of this report are intended to help the practitioner, researcher, and decision maker take a more interdisciplinary approach to engineering in the fractured rock environment. This report describes how existing tools-some only recently developed-can be used to increase the accuracy and reliability of engineering design and management given the interacting forces of nature. With an interdisciplinary approach, it is possible to conceptualize and model the fractured rock environment with acceptable levels of uncertainty and reliability, and to design systems that maximize remediation and long-term performance. Better scientific understanding could inform regulations, policies, and implementation guidelines related to infrastructure development and operations. The recommendations for research and applications to enhance practice of this book make it a valuable resource for students and practitioners in this field.

Download or read book Coupled Thermo Hydro Mechanical Chemical Processes in Geo systems written by Ove Stephansson and published by Elsevier. This book was released on 2004-11-03 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the most important and exciting current steps forward in geo-engineering is the development of coupled numerical models. They represent the basic physics of geo-engineering processes which can include the effects of heat, water, mechanics and chemistry. Such models provide an integrating focus for the wide range of geo-engineering disciplines. The articles within this volume were originally presented at the inaugural GeoProc conference held in Stockholm and contain a collection of unusually high quality information not available elsewhere in an edited and coherent form. This collection not only benefits from the latest theoretical developments but also applies them to a number of practical and wide ranging applications. Examples include the environmental issues around radioactive waste disposal deep in rock, and the search for new reserves of oil and gas.

Download or read book Safe Management of Wastes from Health care Activities written by Yves Chartier and published by World Health Organization. This book was released on 2014 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of the WHO handbook on the safe, sustainable and affordable management of health-care waste--commonly known as "the Blue Book". The original Blue Book was a comprehensive publication used widely in health-care centers and government agencies to assist in the adoption of national guidance. It also provided support to committed medical directors and managers to make improvements and presented practical information on waste-management techniques for medical staff and waste workers. It has been more than ten years since the first edition of the Blue Book. During the intervening period, the requirements on generators of health-care wastes have evolved and new methods have become available. Consequently, WHO recognized that it was an appropriate time to update the original text. The purpose of the second edition is to expand and update the practical information in the original Blue Book. The new Blue Book is designed to continue to be a source of impartial health-care information and guidance on safe waste-management practices. The editors' intention has been to keep the best of the original publication and supplement it with the latest relevant information. The audience for the Blue Book has expanded. Initially, the publication was intended for those directly involved in the creation and handling of health-care wastes: medical staff, health-care facility directors, ancillary health workers, infection-control officers and waste workers. This is no longer the situation. A wider range of people and organizations now have an active interest in the safe management of health-care wastes: regulators, policy-makers, development organizations, voluntary groups, environmental bodies, environmental health practitioners, advisers, researchers and students. They should also find the new Blue Book of benefit to their activities. Chapters 2 and 3 explain the various types of waste produced from health-care facilities, their typical characteristics and the hazards these wastes pose to patients, staff and the general environment. Chapters 4 and 5 introduce the guiding regulatory principles for developing local or national approaches to tackling health-care waste management and transposing these into practical plans for regions and individual health-care facilities. Specific methods and technologies are described for waste minimization, segregation and treatment of health-care wastes in Chapters 6, 7 and 8. These chapters introduce the basic features of each technology and the operational and environmental characteristics required to be achieved, followed by information on the potential advantages and disadvantages of each system. To reflect concerns about the difficulties of handling health-care wastewaters, Chapter 9 is an expanded chapter with new guidance on the various sources of wastewater and wastewater treatment options for places not connected to central sewerage systems. Further chapters address issues on economics (Chapter 10), occupational safety (Chapter 11), hygiene and infection control (Chapter 12), and staff training and public awareness (Chapter 13). A wider range of information has been incorporated into this edition of the Blue Book, with the addition of two new chapters on health-care waste management in emergencies (Chapter 14) and an overview of the emerging issues of pandemics, drug-resistant pathogens, climate change and technology advances in medical techniques that will have to be accommodated by health-care waste systems in the future (Chapter 15).

Download or read book Reactive Transport Modeling written by Yitian Xiao and published by John Wiley & Sons. This book was released on 2018-03-14 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Teaches the application of Reactive Transport Modeling (RTM) for subsurface systems in order to expedite the understanding of the behavior of complex geological systems This book lays out the basic principles and approaches of Reactive Transport Modeling (RTM) for surface and subsurface environments, presenting specific workflows and applications. The techniques discussed are being increasingly commonly used in a wide range of research fields, and the information provided covers fundamental theory, practical issues in running reactive transport models, and how to apply techniques in specific areas. The need for RTM in engineered facilities, such as nuclear waste repositories or CO2 storage sites, is ever increasing, because the prediction of the future evolution of these systems has become a legal obligation. With increasing recognition of the power of these approaches, and their widening adoption, comes responsibility to ensure appropriate application of available tools. This book aims to provide the requisite understanding of key aspects of RTM, and in doing so help identify and thus avoid potential pitfalls. Reactive Transport Modeling covers: the application of RTM for CO2 sequestration and geothermal energy development; reservoir quality prediction; modeling diagenesis; modeling geochemical processes in oil & gas production; modeling gas hydrate production; reactive transport in fractured and porous media; reactive transport studies for nuclear waste disposal; reactive flow modeling in hydrothermal systems; and modeling biogeochemical processes. Key features include: A comprehensive reference for scientists and practitioners entering the area of reactive transport modeling (RTM) Presented by internationally known experts in the field Covers fundamental theory, practical issues in running reactive transport models, and hands-on examples for applying techniques in specific areas Teaches readers to appreciate the power of RTM and to stimulate usage and application Reactive Transport Modeling is written for graduate students and researchers in academia, government laboratories, and industry who are interested in applying reactive transport modeling to the topic of their research. The book will also appeal to geochemists, hydrogeologists, geophysicists, earth scientists, environmental engineers, and environmental chemists.

Download or read book Natural and Engineered Clay Barriers written by and published by Elsevier. This book was released on 2015-05-14 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clays are used as barriers for the isolation of landfills and contaminated sites. They are envisioned as long-term storage media for hazardous materials and radioactive wastes, and as seals in the case of geological CO2 sequestration or energy storage. Clay properties greatly influence the integrity, efficiency, and safety of these applications. Natural and Engineered Clay Barriers provides a clear view of the fundamental properties of clay materials and how these properties affect their engineering applications. This volume focuses on how the mass transfer properties (hydraulic permeability, gas fluxes, molecular diffusion, semi-permeable membrane properties), geochemical reactivity (adsorption, dissolution) and mechanical properties of clay barriers at the macroscale are influenced by phenomena that occur at clay mineral - water interfaces. Examines clay properties from the molecular to the macroscopic scale Addresses experimental and modeling issues Authored by experts in the properties of clay barriers

Download or read book Geothermal Energy Systems written by Ernst Huenges and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Energy Systems The book encounters basic knowledge about geothermal technology for the utilization of geothermal resources. The book helps to understand the basic geology needed for the utilization of geothermal energy, shows up the practice to make access to geothermal reservoirs by drilling and the engineering of the reservoir by enhancing methods. The book describes the technology to make use of the Earth?s heat for direct use, power, and/or chill and gives boundary conditions for its economic and environmental utilization. A special focus is made on enhanced or engineered geothermal systems (EGS) which are based on concepts which bring a priori less productive reservoirs to an economic use. From the contents: Reservoir Definition Exploration Methods Drilling into Geothermal Reservoirs Enhancing Geothermal Reservoirs Geothermal Reservoir Simulation Energetic Use of EGS Reservoirs Economic Performance and Environmental Assessment Deployment of Enhanced Geothermal Systems plants and CO2-mitigation

Download or read book Carbon Dioxide Sequestration in Geological Media written by Matthias Grobe and published by AAPG. This book was released on 2010-03-01 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 20 years, the concept of storing or permanently storing carbon dioxide in geological media has gained increasing attention as part of the important technology option of carbon capture and storage within a portfolio of options aimed at reducing anthropogenic emissions of greenhouse gases to the earths atmosphere. This book is structured into eight parts, and, among other topics, provides an overview of the current status and challenges of the science, regional assessment studies of carbon dioxide geological sequestration potential, and a discussion of the economics and regulatory aspects of carbon dioxide sequestration.

Download or read book Co2 Sequestration By Ex situ Mineral Carbonation written by Aimaro Sanna and published by World Scientific. This book was released on 2016-12-22 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: To meet human energy needs, the use of fossil fuels is set to continue well into the second half of the 21st century. In order to avoid irreversible climate change, carbon dioxide capture and storage (CCS) must be integrated into industrial processes. Mineral carbonation (MC) is increasingly seen as an effective technology solution for CCS of CO2. With the potential to sequester billions of tonnes per year, remarkable developments in mineral carbonation technology are taking place, particularly in USA, Australia and the European Union.This book brings together some of the world's leading experts in the field of sequestration to provide a critical assessment of progress to date. Chapters cover the resources available for MC, and also give a critical analysis of the technologies developed for sequestering carbon from industrial and power plants, including the use of the resultant carbonated product. The studies conclude with evaluation of key technical and economic obstacles which need to be addressed for future research, development and application. CO2 Sequestration by Ex-Situ Mineral Carbonation is essential reading for engineers, chemists and materials scientists in graduate or research positions, and for those interested in sustainability, the environment and ecology.