Download or read book Piezoelectric and Acoustic Materials for Transducer Applications written by Ahmad Safari and published by Springer Science & Business Media. This book was released on 2008-09-11 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the underlying physical principles of piezoelectric materials, important properties of ferroelectric/piezoelectric materials used in today’s transducer technology, and the principles used in transducer design. It provides examples of a wide range of applications of such materials along with the appertaining rationales. With contributions from distinguished researchers, this is a comprehensive reference on all the pertinent aspects of piezoelectric materials.
Download or read book Interface Engineering of Capacitive Micromachined Ultrasonic Transducers for Medical Applications written by Der-Song Lin and published by Stanford University. This book was released on 2011 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Capacitive micromachined ultrasonic transducers (CMUTs), have been widely studied in academia and industry over the last decade. CMUTs provide many benefits over traditional piezoelectric transducers including improvement in performance through wide bandwidth, and ease of electronics integration, with the potential to batch fabricate very large 2D arrays with low-cost and high-yield. Though many aspects of CMUT technology have been studied over the years, packaging the CMUT into a fully practical system has not been thoroughly explored. Two important interfaces of packaging that this thesis explores are device encapsulation (the interface between CMUTs and patients) and full electronic integration of large scale 2D arrays (the interface between CMUTs and electronics). In the first part of the work, I investigate the requirements for the CMUT encapsulation. For medical usage, encapsulation is needed to electrically insulate the device, mechanically protect the device, and maintain transducer performance, especially the access of the ultrasound energy. While hermetic sealing can protect many other MEMS devices, CMUTs require mechanical interaction to a fluid, which makes fulfilling the previous criterion very challenging. The proposed solution is to use a viscoelastic material with the glass-transition-temperature lower than room temperature, such as Polydimethylsiloxane (PDMS), to preserve the CMUT static and dynamic performance. Experimental implementation of the encapsulated imaging CMUT arrays shows the device performance was maintained; 95 % of efficiency, 85% of the maximum output pressure, and 91% of the fractional bandwidth (FBW) can be preserved. A viscoelastic finite element model was also developed and shows the performance effects of the coating can be accurately predicted. Four designs, providing acoustic crosstalk suppression, flexible substrate, lens focusing, and blood flow monitoring using PDMS layer were also demonstrated. The second part of the work, presents contributions towards the electronic integration and packaging of large-area 2-D arrays. A very large 2D array is appealing for it can enable advanced novel imaging applications, such as a reconfigurable array, and a compression plate for breast cancer screening. With these goals in mind, I developed the first large-scale fully populated and integrated 2D CMUTs array with 32 by 192 elements. In this study, I demonstrate a flexible and reliable integration approach by successfully combining a simple UBM preparation technique and a CMUTs-interposer-ASICs sandwich design. The results show high shear strength of the UBM (26.5 g), 100% yield of the interconnections, and excellent CMUT resonance uniformity ([lowercase Sigma] = 0.02 MHz). As demonstrated, this allows for a large-scale assembly of a tile-able array by using an interposer. Interface engineering is crucial towards the development of CMUTs into a practical ultrasound system. With the advances in encapsulation technique with a viscoelastic polymer and the combination of the UBM technique to the TSV fabrication for electronics integration, a fully integrated CMUT system can be realized.
Download or read book Advances in Bioengineering Research and Application 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Bioengineering Research and Application: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Bioengineering. The editors have built Advances in Bioengineering Research and Application: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Bioengineering in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Advances in Bioengineering Research and Application: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Silicon Wafer Bonding Technology written by Subramanian S. Iyer and published by Univ. Press of Mississippi. This book was released on 2002 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the essentials of silicon wafer bonding from an engineering perspective. A beginning chapter deals with basic processes of wafer bonding in detail, and subsequent chapters cover bonding by mechanical removal, the Smart Cut method of hydrogen exfoliation, the ELTRAN thinning technique and hydrogen annealing, engineering methods of wafer characterization, and quality assurance for bonded wafers. A chapter on advanced applications looks at applications in optoelectronics, very large scale integration (VLSI), microelectromechanical systems (MEMS), and photonics. A glossary is included, plus a table comparing various bonding methods. The editors work in the private sector. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Estimation of Blood Velocities Using Ultrasound written by Jørgen Arendt Jensen and published by Cambridge University Press. This book was released on 1996-03-29 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear, extensively illustrated treatment of ultrasound systems used in estimating blood velocities.
Download or read book Ultrasonic Transducers written by K Nakamura and published by Elsevier. This book was released on 2012-08-23 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic transducers are key components in sensors for distance, flow and level measurement as well as in power, biomedical and other applications of ultrasound. Ultrasonic transducers reviews recent research in the design and application of this important technology.Part one provides an overview of materials and design of ultrasonic transducers. Piezoelectricity and basic configurations are explored in depth, along with electromagnetic acoustic transducers, and the use of ceramics, thin film and single crystals in ultrasonic transducers. Part two goes on to investigate modelling and characterisation, with performance modelling, electrical evaluation, laser Doppler vibrometry and optical visualisation all considered in detail. Applications of ultrasonic transducers are the focus of part three, beginning with a review of surface acoustic wave devices and air-borne ultrasound transducers, and going on to consider ultrasonic transducers for use at high temperature and in flaw detection systems, power, biomedical and micro-scale ultrasonics, therapeutic ultrasound devices, piezoelectric and fibre optic hydrophones, and ultrasonic motors are also described.With its distinguished editor and expert team of international contributors,Ultrasonic transducers is an authoritative review of key developments for engineers and materials scientists involved in this area of technology as well as in its applications in sectors as diverse as electronics, wireless communication and medical diagnostics. - Reviews recent research in the design and application of ultrasonic transducers - Provides an overview of the materials and design of ultrasonic transducers, with an in-depth exploration of piezoelectricity and basic configurations - Investigates modelling and characterisation, applications of ultrasonic transducers, and ultrasonic transducers for use at high temperature and in flaw detection systems
Download or read book Encyclopaedia of Medical Physics written by Slavik Tabakov and published by CRC Press. This book was released on 2021-07-19 with total page 1083 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains over 3300 entries with accompanying diagrams, images, formulas, further reading, and examples Covers both the classical and newest elements in medical imaging, radiotherapy, and radiation protection Discusses material at a level accessible to graduate and postgraduate students in medical physics and related disciplines as well as medical specialists and researchers.
Download or read book Numerical Simulation of Mechatronic Sensors and Actuators written by Manfred Kaltenbacher and published by Springer. This book was released on 2015-02-07 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like the previous editions also the third edition of this book combines the detailed physical modeling of mechatronic systems and their precise numerical simulation using the Finite Element (FE) method. Thereby, the basic chapter concerning the Finite Element (FE) method is enhanced, provides now also a description of higher order finite elements (both for nodal and edge finite elements) and a detailed discussion of non-conforming mesh techniques. The author enhances and improves many discussions on principles and methods. In particular, more emphasis is put on the description of single fields by adding the flow field. Corresponding to these field, the book is augmented with the new chapter about coupled flow-structural mechanical systems. Thereby, the discussion of computational aeroacoustics is extended towards perturbation approaches, which allows a decomposition of flow and acoustic quantities within the flow region. Last but not least, applications are updated and restructured so that the book meets modern demands.
Download or read book Non standard Antennas written by François Le Chevalier and published by John Wiley & Sons. This book was released on 2013-01-09 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at describing the wide variety of new technologies and concepts of non-standard antenna systems – reconfigurable, integrated, terahertz, deformable, ultra-wideband, using metamaterials, or MEMS, etc, and how they open the way to a wide range of applications, from personal security and communications to multifunction radars and towed sonars, or satellite navigation systems, with space-time diversity on transmit and receive. A reference book for designers in this lively scientific community linking antenna experts and signal processing engineers.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2006 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Piezoelectric Transducers and Applications written by Antonio Arnau and published by Springer Science & Business Media. This book was released on 2004 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piezoelectric Transducers and Applications provides a guide for graduate students and researchers to the current state of the art of this complex and multidisciplinary area. The book fills an urgent need for a unified source of information on piezoelectric devices and their astounding variety of existing and emerging applications. Some of the chapters focus more on the basic concepts of the different disciplines involved and are presented in a didactic manner. Others go deeper into the complex aspects of specific fields of research, thus reaching the technical level of a scientific paper. Among other topics resonant sensors, especially bulk acoustic wave thickness shear mode resonators, chemical and bio-sensors, as well as broadband ultrasonic systems are treated in-depth.
Download or read book Diagnostic Ultrasound Imaging Inside Out written by Thomas L. Szabo and published by Academic Press. This book was released on 2013-12-05 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diagnostic Ultrasound Imaging provides a unified description of the physical principles of ultrasound imaging, signal processing, systems and measurements. This comprehensive reference is a core resource for both graduate students and engineers in medical ultrasound research and design. With continuing rapid technological development of ultrasound in medical diagnosis, it is a critical subject for biomedical engineers, clinical and healthcare engineers and practitioners, medical physicists, and related professionals in the fields of signal and image processing. The book contains 17 new and updated chapters covering the fundamentals and latest advances in the area, and includes four appendices, 450 figures (60 available in color on the companion website), and almost 1,500 references. In addition to the continual influx of readers entering the field of ultrasound worldwide who need the broad grounding in the core technologies of ultrasound, this book provides those already working in these areas with clear and comprehensive expositions of these key new topics as well as introductions to state-of-the-art innovations in this field. - Enables practicing engineers, students and clinical professionals to understand the essential physics and signal processing techniques behind modern imaging systems as well as introducing the latest developments that will shape medical ultrasound in the future - Suitable for both newcomers and experienced readers, the practical, progressively organized applied approach is supported by hands-on MATLAB® code and worked examples that enable readers to understand the principles underlying diagnostic and therapeutic ultrasound - Covers the new important developments in the use of medical ultrasound: elastography and high-intensity therapeutic ultrasound. Many new developments are comprehensively reviewed and explained, including aberration correction, acoustic measurements, acoustic radiation force imaging, alternate imaging architectures, bioeffects: diagnostic to therapeutic, Fourier transform imaging, multimode imaging, plane wave compounding, research platforms, synthetic aperture, vector Doppler, transient shear wave elastography, ultrafast imaging and Doppler, functional ultrasound and viscoelastic models
Download or read book Micromachined Thin Film Sensors for SOI CMOS Co Integration written by Jean Laconte and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Co-integration of sensors with their associated electronics on a single silicon chip may provide many significant benefits regarding performance, reliability, miniaturization and process simplicity without significantly increasing the total cost. Micromachined Thin-Film Sensors for SOI-CMOS Co-integration covers the challenges and interests and demonstrates the successful co-integration of gas-flow sensors on dielectric membrane, with their associated electronics, in CMOS-SOI technology. We firstly investigate the extraction of residual stress in thin layers and in their stacking and the release, in post-processing, of a 1 μm-thick robust and flat dielectric multilayered membrane using Tetramethyl Ammonium Hydroxide (TMAH) silicon micromachining solution. The optimization of its selectivity towards aluminum is largely demonstrated. The second part focuses on sensors design and characteristics. A novel loop-shape polysilicon microheater is designed and built in a CMOS-SOI standard process. High thermal uniformity, low power consumption and high working temperature are confirmed by extensive measurements. The additional gas flow sensing layers are judiciously chosen and implemented. Measurements in the presence of a nitrogen flow and gas reveal fair sensitivity on a large flow velocity range as well as good response to many gases. Finally, MOS transistors suspended on released dielectric membranes are presented and fully characterized as a concluding demonstrator of the co-integration in SOI technology.
Download or read book Diagnostic Ultrasound written by K. Kirk Shung and published by CRC Press. This book was released on 2005-09-19 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasound imaging is one of the most important and widely used diagnostic tools in modern medicine, second only to the conventional x-ray. Although considered a mature field, research continues for improving the capabilities and finding new uses for ultrasound technology while driving down the cost of newer, more complicated procedures such as int
Download or read book Vibration of Plates written by Arthur W. Leissa and published by . This book was released on 1969 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulated Annealing written by Marcos Sales Guerra Tsuzuki and published by BoD – Books on Demand. This book was released on 2012-10-17 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state of the art contributes to Simulated Annealing (SA) that is a well-known probabilistic meta-heuristic. It is used to solve discrete and continuous optimization problems. The significant advantage of SA over other solution methods has made it a practical solution method for solving complex optimization problems. Book is consisted of 13 chapters, classified in single and multiple objectives applications and it provides the reader with the knowledge of SA and several applications. We encourage readers to explore SA in their work, mainly because it is simple and can determine extremely very good results.
Download or read book Electroceramic Based MEMS written by Nava Setter and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is focused on the use of functional oxide and nitride films to enlarge the application range of MEMS (microelectromechanical systems), including micro-sensors, micro-actuators, transducers, and electronic components for microwaves and optical communications systems. Applications, emerging applications, fabrication technology and functioning issues are presented and discussed. The book covers the following topics: Part A: Applications and devices with electroceramic-based MEMS: Chemical microsensors Microactuators based on thin films Micromachined ultrasonic transducers Thick-film piezoelectric and magnetostrictive devices Pyroelectric microsystems RF bulk acoustic wave resonators and filters High frequency tunable devices MEMS for optical functionality Part B: Materials, fabrication technology, and functionality: Ceramic thick films for MEMS Piezoelectric thin films for MEMS Materials and technology in thin films for tunable high frequency devices Permittivity, tunability and loss in ferroelectrics for reconfigurable high frequency electronics Microfabrication of piezoelectric MEMS Nano patterning methods for electroceramics Soft lithography emerging techniques The book is addressed to engineers, scientists and researchers of various disciplines, device engineers, materials engineers, chemists, physicists and microtechnologists who are working and/or interested in this fast growing and highly promising field. The publication of this book follows a Special Issue on electroceramic-based MEMS that was published in the Journal of Electroceramics at the beginning of 2004. The ten invited papers of that special issue were adapted by the authors into chapters of the present book and five additional chapters were added.
