Download or read book Microstructure of Steels and Cast Irons written by Madeleine Durand-Charre and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises three parts. Part 1 gives a historical description of the development of ironworking techniques since the earliest times. Part 2 is the core of the book and deals with the metallurgical basis of microstructures, with four main themes: phase diagrams, solidification processes, diffusion, and solid state phase transformations. Part 3 begins by an introduction to steel design principles. It then goes on to consider the different categories of steels, placing emphasis on their specific microstructural features. Finally, a comprehensive reference list includes several hundred pertinent articles and books. The book is the work of a single author, thus ensuring uniformity and concision. It is intended for scientists, metallurgical engineers and senior technicians in research and development laboratories, design offices and quality departments, as well as for teachers and students in universities, technical colleges and other higher education establishments.
Download or read book Phase Diagrams of Binary Titanium Alloys written by Joanne L. Murray and published by . This book was released on 1987 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ductile Iron Handbook written by Al Alagarsamy and published by . This book was released on 1992 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Science and Technology of Casting Processes written by Malur Srinivasan and published by BoD – Books on Demand. This book was released on 2012-09-26 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with various science and technology factors that need careful consideration in producing a casting. It consists of 11 chapters contributed by experts in their respective fields. The topics include simulation of continuous casting process, control of solidification of continuous castings, influence of mold flux in continuous casting, segregation in strip casting of steel, developments in shell and solid investment mold processes, innovative pressure control during filling of sand molds, fracture toughness specifically of castings, permanent molding of cast iron, wear resistant castings and improvement of accuracy in estimating graphite nodularity in ductile iron castings.
Download or read book Cast Iron Technology written by Roy Elliott and published by Butterworth-Heinemann. This book was released on 1988-04-18 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cast Iron Technology presents a critical review of the nature of cast irons. It discusses the types of cast iron and the general purpose of cast irons. It also presents the history of the iron founding industry. Some of the topics covered in the book are the description of liquid metal state; preparation of liquid metal; process of melting; description of cupola melting and electric melting methods; control of composition of liquid metal during preparation; description of primary cast iron solidification structures; and thermal analysis of metals to determine its quality. Solidification science and the fundamentals of heat treatment are also discussed. An in-depth analysis of the hot quenching techniques is provided. The graphitization potential of liquid iron is well presented. A chapter is devoted to microstructural features of cast iron. The book can provide useful information to iron smiths, welders, students, and researchers.
Download or read book ASM Handbook written by and published by . This book was released on 1990 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes cover the properties, processing, and applications of metals and nonmetallic engineering materials. They are designed to provide the authoritative information and data necessary for the appropriate selection of materials to meet critical design and performance criteria.
Download or read book Microstructure and Properties of Ductile Iron and Compacted Graphite Iron Castings written by Mariusz Holtzer and published by Springer. This book was released on 2015-03-27 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the surface effects at the interface boundary of metal/sand moulds, and their influence on the surface quality, microstructure and mechanical and anticorrosive properties of high-quality cast iron. It explores utilitarian aspects of the production of high-quality cast iron castings, including thin-walled castings of high-quality cast iron alloys, and examines problems related to the determination of moulding sands and reclaim quality, and their influence on castings. Presenting new material, this book takes into account the influence of metal quality, pouring temperature, solidification time, the quality of moulding sand with the reclaim application, as well the binders of moulding sands, on the formation of the degenerated graphite near surface layers. It also employs the latest research methods, such as a wavelength-dispersive spectrometer (WDS) analysis and thermodynamic calculations, which were carried out on the reactions occurring in the study area. Providing a valuable resource to academics and researchers interested in materials science, metal casting and metallurgy, this book is also intended for metal industry professionals.
Download or read book Journal of Research and Development written by and published by . This book was released on 1964 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book Transactions of the American Foundrymen s Society written by American Foundrymen's Society and published by . This book was released on 1999 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallographer s Guide written by B. L. Bramfitt and published by ASM International. This book was released on 2001-01-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a solid overview of the important metallurgical concepts related to the microstructures of irons and steels, and it provides detailed guidelines for the proper metallographic techniques used to reveal, capture, and understand microstructures. This book provides clearly written explanations of important concepts, and step-by-step instructions for equipment selection and use, microscopy techniques, specimen preparation, and etching. Dozens of concise and helpful “metallographic tips” are included in the chapters on laboratory practices and specimen preparation. The book features over 500 representative microstructures, with discussions of how the structures can be altered by heat treatment and other means. A handy index to these images is provided, so the book can also be used as an atlas of iron and steel microstructures.
Download or read book Heat Treating 1998 Proceedings of the 18th Conference Including the Liu Dai Memorial Symposium written by Harry W. Walton and published by ASM International. This book was released on 1999-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Casting Processes and Modelling of Metallic Materials written by Zak Abdallah and published by BoD – Books on Demand. This book was released on 2021-02-24 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Casting Processes and Modelling of Metallic Materials, explores the various casting and modelling activities related to metallic alloy systems. The book provides results of research work conducted by experts from all over the globe to add to the research community in the era of the casting process and modelling. The book was edited by two experts in the field of materials science and modelling, Dr. Abdallah and Dr. Aldoumani, whom both have several publications in peer-reviewed journals, worldwide conferences, and scientific books. The book introduces the casting processes and then discusses the various issues and possible solutions. Over the past years, various models have been proposed and utilized to predict the performance of castings. Some of these models proved to be accurate whereas others failed to predict the casting performance. The strength of any predictive tool depends on the employment of physically meaningful parameters that replicate the real-life conditions. This has been illustrated in the current book with such predictive models and finite element (FE) modelling to illustrate the behaviour of castings in real-life conditions.
Download or read book Bulletin of the British Cast Iron Research Association written by British Cast Iron Research Association and published by . This book was released on 1928 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transactions of the American Society for Steel Treating written by American Society for Steel Treating and published by . This book was released on 1927 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallic Materials Specification Handbook written by R. B. Ross and published by Springer. This book was released on 1980 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt:
