Download or read book Investigating the Mechanisms of the Formation of Spiral Grain and Interlocked Grain in Wood written by Stephanie M. Dijkstra and published by . This book was released on 2020 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spiral Grain and Wave Phenomena in Wood Formation written by John M. Harris and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is widely recognized that spiral grain in trees severely reduces the value of sawn timber through warping and loss of strength, and that it also causes problems for other wood uses as diverse as transmission poles or plywood. Yet, paradoxically, there are highly valued grain patterns including wavy and interlocked grain, whose origins in the cambium invite direct comparison with those of spiral grain, so that many authorities believe them to be related phenomena. In recent years this concept has prompted extensive research into the anatomy, genetics, and physiology of all such grain patterns in wood. As a result it has become apparent that tree cambia provide excellent systems through which to study the origins of stem polarity and the complex processes of morphogenetic control in plants. Beside these and other pressing topics for research, the book examines methods of measuring grain deviations, and considers their influence on wood properties, on the economics of timber production, and on wood manufacturing.
Download or read book Committees on Spiral Grain and Heartwood Formation written by International Union of Forestry Research Organizations. Section 41. Working Groups of Wood Quality, Sawing and Machining, and Tree Chemistry and published by . This book was released on 1966 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Identifying Wood written by R. Bruce Hoadley and published by Taunton. This book was released on 1990 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the anatomy of trees and provides instructions for identifying the wood of nearly two hundred species
Download or read book The Structural Conservation of Panel Paintings written by Kathleen Dardes and published by Getty Publications. This book was released on 1998-10-29 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of an international symposium organized by the Getty Conservation Institute and the J. Paul Getty Museum. The first conference of its kind in twenty years, the symposium assembled an international group of conservators of painted panels, and gave them the opportunity to discuss their philosophies and share their work methods. Illustrated in color throughout, this volume presents thirty-one papers grouped into four topic areas: Wood Science and Technology, History of Panel-Manufacturing Techniques, History of the Structural Conservation of Panel Paintings, and Current Approaches to the Structural Conservation of Panel Paintings.
Download or read book Wood Research written by and published by . This book was released on 1999 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spiral Grain written by C. A. Wellner and published by . This book was released on 1967 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
Download or read book Timber Bridges written by Michael A. Ritter and published by Datamotion Publishing LLC. This book was released on 1990 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a comprehensive analysis of the design, construction, inspection, and maintenance of timber bridges.
Download or read book Geotechnical Modelling written by David Muir Wood and published by CRC Press. This book was released on 2017-12-21 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling forms an implicit part of all engineering design but many engineers engage in modelling without consciously considering the nature, validity and consequences of the supporting assumptions. Derived from courses given to postgraduate and final year undergraduate MEng students, this book presents some of the models that form a part of the typical undergraduate geotechnical curriculum and describes some of the aspects of soil behaviour which contribute to the challenge of geotechnical modelling. Assuming a familiarity with basic soil mechanics and traditional methods of geotechnical design, this book is a valuable tool for students of geotechnical and structural and civil engineering as well as also being useful to practising engineers involved in the specification of numerical or physical geotechnical modelling.
Download or read book The Conservation of Artifacts Made from Plant Materials written by Mary-Lou E. Florian and published by Getty Publications. This book was released on 1991-03-21 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This teaching guide covers the identification, deterioration, and conservation of artifacts made from plant materials. Detailed information on plant anatomy, morphology, and development, focusing on information useful to the conservator in identifying plant fibers are described, as well as the processing, construction, and decorative techniques commonly used in such artifacts. A final chapter provides a thorough discussion of conservation, preservation, storage, and restoration methods. This is a valuable resource to conservators and students alike.
Download or read book Timber written by H E Desch and published by CRC Press. This book was released on 1996-06-13 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: For nearly 60 years, Timber: Structure, Properties, Conversion, and Use has been the authoritative text on timber technology. Now in its seventh edition, this book remains a vital resource, providing accurate, comprehensive, and fact-driven information for students and professionals in the field. From basic coverage of timber structure, properties, processing, and utilization, to more in-depth scientific investigations, this book covers all the issues and topics of concern to readers with a wide range of levels of sophistication. Timber technology has not stood still since the last revision; Timber: Structure, Properties, Conversion, and Use has kept the pace, exploring such high-tech topics as computer-aided wood identification and log conversion, radio frequency drying of wood, enhancement of wood with plastics, application of preservatives with high-pressure vacuum systems, and the development and application of flame-retardant solutions. Other timely updates include enlarging the chapter on mechanical performance to cover elastic behavior, toughness, and the use of structural-sized timber for strength tests. The chapter on board materials has also been extensively updated and enlarged to include information on new boards and structural composites that have emerged since the last edition. One of the most important strengths of Timber: Structure, Properties, Conversion, and Use is its versatility as a reference for timber professionals while remaining approachable to students in the field. Evidence of the book?s comprehensiveness and versatility becomes clear as it teaches readers about such wide-ranging topics as: identification and nomenclature of timbers variability in cellular features between species principal chemical constituents in timber structural variability caused by natural defects such as bark pockets, resin streaks, and brittleheart determination of density and moisture content in timber thermal and acoustic properties of wood conversion equipment such as circular saws, band saws, frame saws, and chipper canters health and safety issues in the industry adhesives, metal connectors, and joint design forest and millyard pests application of preservatives and finishes From basic identification and timber nomenclature to methods of sap displacement and tests of electrical conductivity, Timber: Structure, Properties, Conversion, and Use covers it all. And while it is no longer possible for any one individual to write authoritatively on every aspect of timber technology, embracing as it does structure, properties, conversion, utilization, and behavior in service, J. M. Dinwoodie has gathered expert opinions and expanded on original author H. E. Desch?s approach and vision to continue to provide the authoritative text on timber technology.
Download or read book Pile Design and Construction Practice written by Willis H. Thomas and published by CRC Press. This book was released on 2007-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile group
Download or read book Computational and Experimental Simulations in Engineering written by Hiroshi Okada and published by Springer Nature. This book was released on 2019-11-16 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of computational engineering, as presented by leading international researchers and engineers at the 24th International Conference on Computational & Experimental Engineering and Sciences (ICCES), held in Tokyo, Japan on March 25-28, 2019. ICCES covers all aspects of applied sciences and engineering: theoretical, analytical, computational, and experimental studies and solutions of problems in the physical, chemical, biological, mechanical, electrical, and mathematical sciences. As such, the book discusses highly diverse topics, including composites; bioengineering & biomechanics; geotechnical engineering; offshore & arctic engineering; multi-scale & multi-physics fluid engineering; structural integrity & longevity; materials design & simulation; and computer modeling methods in engineering. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.
Download or read book Plant Resources of South East Asia written by R. H. Lemmens and published by Springer Verlag. This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Program summarizes information on 2900 timbers-yielding species and has been extended with a search facility for wood properties and an interactive wood-anatomy identification system".
Download or read book Cellular Aspects of Wood Formation written by Jörg Fromm and published by Springer Science & Business Media. This book was released on 2013-04-11 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: With today’s ever growing economic and ecological problems, wood as a raw material takes on increasing significance as the most important renewable source of energy and as industrial feedstock for numerous products. Its chemical and anatomical structure and the excellent properties that result allow wood to be processed into the most diverse products; from logs to furniture and veneers, and from wood chippings to wooden composites and paper. The aim of this book is to review advances in research on the cellular aspects of cambial growth and wood formation in trees over recent decades. The book is divided into two major parts. The first part covers the basic process of wood biosynthesis, focusing on five major steps that are involved in this process: cell division, cell expansion, secondary cell wall formation, programmed cell death and heartwood formation. The second part of the book deals with the regulation of wood formation by endogenous and exogenous factors. On the endogenous level the emphasis is placed on two aspects: control of wood formation by phytohormones and by molecular mechanisms. Apart from endogenous factors, various exogenous effects (such as climate factors) are involved in wood formation. Due to modern microscopic as well as molecular techniques, the understanding of wood formation has progressed significantly over the last decade. Emphasizing the cellular aspects, this book first gives an overview of the basic process of wood formation, before it focuses on factors involved in the regulation of this process.
Download or read book The Vascular Cambium written by Philip R. Larson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: The cambium has been variously defined as follows: "The actively dividing layer of cells that lies between, and gives rise to, secondary xylem and phloem (vascular cambium)" (IAWA 1964); "A meristem with products of periclinal divisions commonly contributed in two directions and arranged in radial files. Term pre ferably applied only to the two lateral meristems, the vascular cambium and cork cambium, or phellogen" (Esau 1977); and, "Lateral meristem in vascular plants which produces secondary xylem, secondary phloem, and parenchyma, usually in radial rows; it consists of one layer of initials and their undifferentiated deriva tives" (Little and Jones 1980). Clearly, the cambium is a diverse and extensive meristem, and no one defini tion will encompass all manifestations of what anatomists consider cambium. Its diversity and extent are further exemplified by a single plant, such as a temperate zone tree, in which procambium is initiated in the embryo and perpetuated throughout every lateral, primary meristem before giving rise to cambium in the secondary body. The cambium thereafter performs its meristematic task of producing daughter cells that differentiate to specialized tissue systems. The cam bium, however, does not remain static. Its derivatives vary either in form, or TImc tion, or rate of production at different positions on the tree, with age of the tree, and with season of the year. Moreover, the cambium responds both to internal sig nals and to external stimuli such as environment or wounding.
