Download or read book Investigating Performance and Reliability of Process Bus Networks for Digital Protective Relaying written by Mitalkumar Kanabar and published by . This book was released on 2011 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: To reduce the cost of complex and long copper wiring, as well as to achieve flexibility in signal communications, IEC 61850 part 9-2 proposes a process bus communication network between process level switchyard equipments, and bay level protection and control (P & C) Intelligent Electronic Devices (IEDs). After successful implementation of Ethernet networks for IEC 61850 standard part 8-1 (station bus) at several substations worldwide, major manufacturers are currently working on the development of interoperable products for the IEC 61850-9-2 based process bus. The major technical challenges for applying Ethernet networks at process level include: 1) the performance of time critical messages for protection applications; 2) impacts of process bus Ethernet networks on the reliability of substation protection systems. This work starts with the performance analysis in terms of time critical Sampled Value (SV) messages loss and/or delay over the IEC 61850-9-2 process bus networks of a typical substation. Unlike GOOSE, the SV message is not repeated several times, and therefore, there is no assurance that each SV message will be received from the process bus network at protection IEDs. Therefore, the detailed modeling of IEC 61850 based substation protection devices, communication protocols, and packet format is carried out using an industry-trusted simulation tool OPNET, to study and quantify number of SV loss and delay over the process bus. The impact of SV loss/delay on digital substation protection systems is evident, and recognized by several manufacturers. Therefore, a sample value estimation algorithm is developed in order to enhance the performance of digital substation protection functions by estimating the lost and delayed sampled values. The error of estimation is evaluated in detail considering several scenarios of power system relaying. The work is further carried out to investigate the possible impact of SV loss/delay on protection functions, and test the proposed SV estimation algorithm using the hardware setup. Therefore, a state-of-the-art process bus laboratory with the protection IEDs and merging unit playback simulator using industrial computers on the QNX hard-real-time platform, is developed for a typical IEC 61850-9-2 based process bus network. Moreover, the proposed SV estimation algorithm is implemented as a part of bus differential and transmission line distance protection IEDs, and it is tested using the developed experimental setup for various SV loss/delay scenarios and power system fault conditions. In addition to the performance analysis, this work also focuses on the reliability aspects of protection systems with process bus communication network. To study the impact of process bus communication on reliability indices of a substation protection function, the detailed reliability modeling and analysis is carried out for a typical substation layout. First of all, reliability analysis is done using Reliability Block Diagrams (RBD) considering various practical process bus architectures, as well as, time synchronization techniques. After obtaining important failure rates from the RBD, an extended Markov model is proposed to analyze the reliability indices of protection systems, such as, protection unavailability, abnormal unavailability, and loss of security. It is shown with the proposed Markov model that the implementation of sampled value estimation improves the reliability indices of a protection system.

Download or read book The Art and Science of Protective Relaying written by C. Russell Mason and published by . This book was released on 1997* with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Substation Automation written by Mladen Kezunovic and published by Springer Verlag. This book was released on 2010-07-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the book is to fill a knowledge gap by covering the topic of substation automation by a team of authors, with academic and industry backgrounds. Understanding substation automation concepts and practical solutions requires knowledge in vastly diverse areas, such as primary and secondary equipment, computers, communications, fiber optic sensors, signal processing, and general information technology not generally taught in a power curricula but taught as independent subjects. At the same time, utility practice dictates how substation automation designs may be laid out and deployed. To design such a system one also requires knowledge about existing standards for data exchange, as well as test methods for evaluation of solutions. This book is designed to meet the educational needs of undergraduate and graduate power majors, as well as to serve as a reference to professionals who need to know about substation automation because of fast changing technology expertise needed in their careers. To meet the wide range of interests and needs, the book covers diverse aspects of substation automation, allowing instructors to select the best combination of chapters to meet their specific educational needs.

Download or read book Digital Signal Processing in Power System Protection and Control written by Waldemar Rebizant and published by Springer Science & Business Media. This book was released on 2011-07-28 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Signal Processing in Power System Protection and Control bridges the gap between the theory of protection and control and the practical applications of protection equipment. Understanding how protection functions is crucial not only for equipment developers and manufacturers, but also for their users who need to install, set and operate the protection devices in an appropriate manner. After introductory chapters related to protection technology and functions, Digital Signal Processing in Power System Protection and Control presents the digital algorithms for signal filtering, followed by measurement algorithms of the most commonly-used protection criteria values and decision-making methods in protective relays. A large part of the book is devoted to the basic theory and applications of artificial intelligence techniques for protection and control. Fuzzy logic based schemes, artificial neural networks, expert systems and genetic algorithms with their advantages and drawbacks are discussed. AI techniques are compared and it is also shown how they can be combined to eliminate the disadvantages and magnify the useful features of particular techniques. The information provided in Digital Signal Processing in Power System Protection and Control can be useful for protection engineers working in utilities at various levels of the electricity network, as well as for students of electrical engineering, especially electrical power engineering. It may also be helpful for other readers who want to get acquainted with and to apply the filtering, measuring and decision-making algorithms for purposes other than protection and control, everywhere fast and on-line signal analysis is needed for proper functioning of the apparatus.

Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power System Protection in Smart Grid Environment written by Ramesh Bansal and published by CRC Press. This book was released on 2019-01-15 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: With distributed generation interconnection power flow becoming bidirectional, culminating in network problems, smart grids aid in electricity generation, transmission, substations, distribution and consumption to achieve a system that is clean, safe (protected), secure, reliable, efficient, and sustainable. This book illustrates fault analysis, fuses, circuit breakers, instrument transformers, relay technology, transmission lines protection setting using DIGsILENT Power Factory. Intended audience is senior undergraduate and graduate students, and researchers in power systems, transmission and distribution, protection system broadly under electrical engineering.

Download or read book Protective Relaying for Power Systems II written by Stanley H. Horowitz and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1992 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wide Area Power Systems Stability Protection and Security written by Hassan Haes Alhelou and published by Springer Nature. This book was released on 2020-09-21 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes new control and protection schemes to improve the overall stability and security of future wide-area power systems. It focuses on the high penetration levels of renewable energy sources and distributed generation, particularly with the trend towards smart grids. The control methods discussed can improve the overall stability in normal and abnormal operation conditions, while the protection methods presented can be used to ensure the secure operation of systems under most severe contingencies. Presenting stability, security, and protection methods for power systems in one concise volume, this book takes the reader on a journey from concepts and fundamentals to the latest and future trends in each topic covered, making it an informative and intriguing read for researchers, graduate students, and practitioners alike.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Protective Relaying written by J. Lewis Blackburn and published by CRC Press. This book was released on 2014-02-11 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years, Protective Relaying: Principles and Applications has been the go-to text for gaining proficiency in the technological fundamentals of power system protection. Continuing in the bestselling tradition of the previous editions by the late J. Lewis Blackburn, the Fourth Edition retains the core concepts at the heart of power system analysis. Featuring refinements and additions to accommodate recent technological progress, the text: Explores developments in the creation of smarter, more flexible protective systems based on advances in the computational power of digital devices and the capabilities of communication systems that can be applied within the power grid Examines the regulations related to power system protection and how they impact the way protective relaying systems are designed, applied, set, and monitored Considers the evaluation of protective systems during system disturbances and describes the tools available for analysis Addresses the benefits and problems associated with applying microprocessor-based devices in protection schemes Contains an expanded discussion of intertie protection requirements at dispersed generation facilities Providing information on a mixture of old and new equipment, Protective Relaying: Principles and Applications, Fourth Edition reflects the present state of power systems currently in operation, making it a handy reference for practicing protection engineers. And yet its challenging end-of-chapter problems, coverage of the basic mathematical requirements for fault analysis, and real-world examples ensure engineering students receive a practical, effective education on protective systems. Plus, with the inclusion of a solutions manual and figure slides with qualifying course adoption, the Fourth Edition is ready-made for classroom implementation.

Download or read book Protective Relaying written by Walter A. Elmore and published by CRC Press. This book was released on 2003-09-09 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Targeting the latest microprocessor technologies for more sophisticated applications in the field of power system short circuit detection, this revised and updated source imparts fundamental concepts and breakthrough science for the isolation of faulty equipment and minimization of damage in power system apparatus. The Second Edition clearly describes key procedures, devices, and elements crucial to the protection and control of power system function and stability. It includes chapters and expertise from the most knowledgeable experts in the field of protective relaying, and describes microprocessor techniques and troubleshooting strategies in clear and straightforward language.

Download or read book Electric Power Substations Engineering written by John D. McDonald and published by CRC Press. This book was released on 2016-04-19 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining select chapters from Grigsby's standard-setting The Electric Power Engineering Handbook with several chapters not found in the original work, Electric Power Substations Engineering became widely popular for its comprehensive, tutorial-style treatment of the theory, design, analysis, operation, and protection of power substations. For its

Download or read book Catching the Process Fieldbus written by James Powell and published by Momentum Press, LLC. This book was released on 2012 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: A field bus is a two-way link between a programmable controller or operations monitor and an industrial device like a sensor, an electric motor, or a switch. It is a critical part of any automated industrial process - whether for factory automation (discrete processes like an assembly line) or process automation (continuous flow of materials being mixed, treated, or processed). PROFIBUS is a widely established program that allows for communication among and between controllers, fieldbuses, and actuator devices. This very concise introduction for industrial engineers, controls engineers, and manufacturing technicians covers the basics of field bus architecture and communication and the fundamentals of the PROFIBUS language protocol.

Download or read book Security Privacy and Reliability in Computer Communications and Networks written by Kewei Sha and published by River Publishers. This book was released on 2016-11-30 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future communication networks aim to build an intelligent and efficient living environment by connecting a variety of heterogeneous networks to fulfill complicated tasks. These communication networks bring significant challenges in building secure and reliable communication networks to address the numerous threat and privacy concerns. New research technologies are essential to preserve privacy, prevent attacks, and achieve the requisite reliability. Security, Privacy and Reliability in Computer Communications and Networks studies and presents recent advances reflecting the state-of-the-art research achievements in novel cryptographic algorithm design, intrusion detection, privacy preserving techniques and reliable routing protocols. Technical topics discussed in the book include: Vulnerabilities and Intrusion DetectionCryptographic Algorithms and EvaluationPrivacy Reliable Routing Protocols This book is ideal for personnel in computer communication and networking industries as well as academic staff and collegial, master, Ph.D. students in computer science, computer engineering, cyber security, information insurance and telecommunication systems.

Download or read book Network Protection Automation Guide written by and published by . This book was released on 2002 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Sensors and Controls in Communication Networks written by Dong-Seong Kim and published by Springer. This book was released on 2018-12-11 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informative text/reference presents a detailed review of the state of the art in industrial sensor and control networks. The book examines a broad range of applications, along with their design objectives and technical challenges. The coverage includes fieldbus technologies, wireless communication technologies, network architectures, and resource management and optimization for industrial networks. Discussions are also provided on industrial communication standards for both wired and wireless technologies, as well as for the Industrial Internet of Things (IIoT). Topics and features: describes the FlexRay, CAN, and Modbus fieldbus protocols for industrial control networks, as well as the MIL-STD-1553 standard; proposes a dual fieldbus approach, incorporating both CAN and ModBus fieldbus technologies, for a ship engine distributed control system; reviews a range of industrial wireless sensor network (IWSN) applications, from environmental sensing and condition monitoring, to process automation; examines the wireless networking performance, design requirements, and technical limitations of IWSN applications; presents a survey of IWSN commercial solutions and service providers, and summarizes the emerging trends in this area; discusses the latest technologies and open challenges in realizing the vision of the IIoT, highlighting various applications of the IIoT in industrial domains; introduces a logistics paradigm for adopting IIoT technology on the Physical Internet. This unique work will be of great value to all researchers involved in industrial sensor and control networks, wireless networking, and the Internet of Things.

Download or read book Computer Relaying for Power Systems written by Arun G. Phadke and published by John Wiley & Sons. This book was released on 2009-07-20 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since publication of the first edition of Computer Relaying for Power Systems in 1988, computer relays have been widely accepted by power engineers throughout the world and in many countries they are now the protective devices of choice. The authors have updated this new edition with the latest developments in technology and applications such as adaptive relaying, wide area measurements, signal processing, new GPS-based measurement techniques and the application of artificial intelligence to digital relays. New material also includes sigma-delta and oversampling A/D converters, self-polarizing and cross-polarizing in transmission lines protection and optical current and voltage transformers. Phadke and Thorp have been working together in power systems engineering for more than 30 years. Their impressive work in the field has been recognized by numerous awards, including the prestigious 2008 Benjamin Franklin Medal in Electrical Engineering for their pioneering contributions to the development and application of microprocessor controllers in electric power systems. Provides the student with an understanding of computer relaying Authored by international authorities in computer relaying Contents include relaying practices, mathematical basis for protective relaying algorithms, transmission line relaying, protection of transformers, machines and buses, hardware organization in integrated systems, system relaying and control, and developments in new relaying principles Features numerous solved examples to explain several of the more complex topics, as well as a problem at the end of each chapter Includes an updated list of references and a greatly expanded subject index.