Download or read book Introduction to Steels written by P.C. Angelo and published by CRC Press. This book was released on 2019-03-20 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book briefly describes the structure, properties and applications of various grades of steel, primarily aimed at non-metallurgical students from other engineering streams. The book consists of nine chapters covering most of the important types of steels and their physical metallurgy, microstructure and engineering applications including iron-carbon diagram, heat treatment, surface hardening methods, effect of alloying, specific applications, selection of materials, case studies and so forth. The book also contains subjective and objective questions aimed at exam preparation. Key Features Exclusive title aimed at introduction to steels for non-metallurgy audience Includes microstructure, composition, and properties of all the most commonly used steels Describes the heat treatments and the required alloying additions to process steel for the intended applications Discusses effects of alloying elements on steel Explores development of steels for specialized areas such as the automobile, aerospace, and nuclear industries
Download or read book Introduction to Stainless Steels written by Jonathan Beddoes and published by ASM International(OH). This book was released on 1999 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as a basic and introductory reference, this book not only addresses stainless steels in the light of their resistance to corrosion for which they are more commonly recognised, but also explains the wide range of other useful properties attributable to the various and specific categories of these alloys. This book is a concise, easy-to-read introduction to one of the most widely used industrial materials. Each chapter explains an important concept related to the selection, application, processing and use of stainless steels. This book is indexed and includes appendices: (1) Identification of Stainless Steels in Service (2) Toxicity of Stainless Steel (3) Table of Equivalent Designations (this is not intended to be complete, but includes the more commonly used stainless steels and the most widely used designation systems). First published in 1965 and updated in 1986, this third edition is a completely new text.
Download or read book Introduction to Steels written by P.C. Angelo and published by CRC Press. This book was released on 2019-03-20 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book briefly describes the structure, properties and applications of various grades of steel, primarily aimed at non-metallurgical students from other engineering streams. The book consists of nine chapters covering most of the important types of steels and their physical metallurgy, microstructure and engineering applications including iron-carbon diagram, heat treatment, surface hardening methods, effect of alloying, specific applications, selection of materials, case studies and so forth. The book also contains subjective and objective questions aimed at exam preparation. Key Features Exclusive title aimed at introduction to steels for non-metallurgy audience Includes microstructure, composition, and properties of all the most commonly used steels Describes the heat treatments and the required alloying additions to process steel for the intended applications Discusses effects of alloying elements on steel Explores development of steels for specialized areas such as the automobile, aerospace, and nuclear industries
Download or read book Steel Metallurgy written by S. K. Mandal and published by McGraw Hill Professional. This book was released on 2015-01-22 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly illustrated resource covers the characteristics, properties, specifications, heat treatment, and application of steels for engineering students, non-metallurgical engineers, and technicians. There’s a saying that “steel makes the world.” From a tiny pin in a sewing kit to home appliances to cars to bridges, steel is everywhere. While there are numerous books on steel, few, if any, address the true application of steels in a practical manner. This book was written to fill that gap. Divided into four parts, Steel Metallurgy: Properties, Specifications, and Applications covers the basic metallurgical facts and characteristics, properties, standards, and grades of steel. Classifications of steel based on standards and structural engineering are then discussed, followed by heat treatment and welding of steels. The book then focuses on the application of steel and its reliability and failures, and shows, through numerous illustrations and case studies, how it’s processed and used for various purposes. Armed with the information in this book, metallurgical and engineering students will become truly “industry ready.” Case studies and illustrations show steel being used in practical, everyday applications, making the book user friendly yet comprehensive Lays the ground work for steel selection, and discusses the methods of selection Contains appendices with steel grades, compositions, and standards; physical data and conversions; temperature, hardness, and work/energy conversion tables Includes a glossary of important metallurgical terms
Download or read book Automotive Steels written by Radhakanta Rana and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Steels: Design, Metallurgy, Processing and Applications explores the design, processing, metallurgy, and applications of automotive steels. While some sheet steels are produced routinely in high volume today, there have been significant advances in the use of steel in the automotive industry. This book presents these metallurgical and application aspects in a way that is not available in the current literature. The editors have assembled an international team of experts who discuss recent developments and future prospects for automotive steels, compiling essential reading for both academic and industrial metallurgists, automotive design engineers, and postgraduate students attending courses on the metallurgy of automotive materials. - Presents recent developments on the design, metallurgy, processing, and applications of automotive steels - Discusses automotive steels that are currently in the early stages of research, such as low-density and high modulus steels that are driving future development - Covers traditional steels, advanced high strength steels, elevated Mn steels and ferrous composite materials
Download or read book Steels Processing Structure and Performance Second Edition written by George Krauss and published by ASM International. This book was released on 2015-03-01 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: George Krauss, University Emeritus Professor, Colorado School of Mines and author of the best-selling ASM book Steels: Processing, Structure, and Performance, discusses some of the important additions and updates to the new second edition.
Download or read book Steels written by Wei Sha and published by Springer Science & Business Media. This book was released on 2013-01-11 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels and computer-based modelling are fast growing fields in materials science as well as structural engineering, demonstrated by the large amount of recent literature. Steels: From Materials Science to Structural Engineering combines steels research and model development, including the application of modelling techniques in steels. The latest research includes structural engineering modelling, and novel, prototype alloy steels such as heat-resistant steel, nitride-strengthened ferritic/martensitic steel and low nickel maraging steel. Researchers studying steels will find the topics vital to their work. Materials experts will be able to learn about steels used in structural engineering as well as modelling and apply this increasingly important technique in their steel materials research and development.
Download or read book Stainless Steels written by Joseph Ki Leuk Lai and published by Bentham Science Publishers. This book was released on 2012 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Stainless Steels: An Introduction and Their Recent Developments explains issues related to surface treatment, grain refinement, coloration, defect detection and powder metallurgy of stainless steels in detail with reference to new research findings. It al"
Download or read book Metallographer s Guide written by B. L. Bramfitt and published by ASM International. This book was released on 2001-01-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a solid overview of the important metallurgical concepts related to the microstructures of irons and steels, and it provides detailed guidelines for the proper metallographic techniques used to reveal, capture, and understand microstructures. This book provides clearly written explanations of important concepts, and step-by-step instructions for equipment selection and use, microscopy techniques, specimen preparation, and etching. Dozens of concise and helpful “metallographic tips” are included in the chapters on laboratory practices and specimen preparation. The book features over 500 representative microstructures, with discussions of how the structures can be altered by heat treatment and other means. A handy index to these images is provided, so the book can also be used as an atlas of iron and steel microstructures.
Download or read book Microstructure of Steels and Cast Irons written by Madeleine Durand-Charre and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises three parts. Part 1 gives a historical description of the development of ironworking techniques since the earliest times. Part 2 is the core of the book and deals with the metallurgical basis of microstructures, with four main themes: phase diagrams, solidification processes, diffusion, and solid state phase transformations. Part 3 begins by an introduction to steel design principles. It then goes on to consider the different categories of steels, placing emphasis on their specific microstructural features. Finally, a comprehensive reference list includes several hundred pertinent articles and books. The book is the work of a single author, thus ensuring uniformity and concision. It is intended for scientists, metallurgical engineers and senior technicians in research and development laboratories, design offices and quality departments, as well as for teachers and students in universities, technical colleges and other higher education establishments.
Download or read book Steel and Iron Handbook written by B.P. Bhardwaj and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2014-01-01 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern civilization as people know it would not be possible without Iron and Steel. Iron has been a vital material in technology for well over three thousand years. However, since ancient times, steel is made by alloying iron with carbon to produce a harder, stronger metal that will take a much keener edge. Owing to its intense connections with core infrastructural segments of the economy, steel industry is of high priority and importance. Steel has probably the widest range of applications of any material. The wide range of alloy compositions, mechanical properties and product forms available make it a versatile material that is used in components and products that may be small or large, high-tech or low-tech, everyday or specialist. In an introduction to modern steel making, an attempt has been made to cover, as the space would permit, the entire field of steel making with equal emphasis on the general practices and the underlying principles. This book is intended as a resource and as an introduction to the layman about our most important metal system. This book provides basic information covering every aspect of iron and steel production as well as a practical aid for workers engaged in the field. After an introduction that deals with the history and production of iron and steel, the rest of the book examines their physical properties and metallurgy. Beginning with a brief introduction to the ferrous alloys and metals, types and production of cast iron, production of compacted Graphite Irons, Ductile Iron, Malleable Cast Iron and current status of steel making together with the reasons for obsolescence of Bessemer converter and open hearth processes, the book moves on to: elaborate the physiochemical principles involved in steel making; explain the operational principles and practices of the modern processes of primary steel making (LD converter, Q-BOP process, and electric arc furnace process); provide a summary of the developments in secondary refining of steels; discuss principles and practices of ingot casting and continuous casting of steels; discusses the defects in the steel produced and also the remedies for their removal. This book provides considerable information in an easily assimilable form and makes an ideal introduction to the complex subject of steel technology.
Download or read book Metallography of Steels Interpretation of Structure and the Effects of Processing written by Hubertus Colpaert and published by ASM International. This book was released on 2018-08-01 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Download or read book Introduction to Today s Ultrahigh strength Structural Steels written by Albert M. Hall and published by ASTM International. This book was released on 1971 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Welding and Joining of Advanced High Strength Steels AHSS written by Mahadev Shome and published by Elsevier. This book was released on 2015-02-25 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welding and Joining of Advanced High Strength Steels (AHSS): The Automotive Industry discusses the ways advanced high strength steels (AHSS) are key to weight reduction in sectors such as automotive engineering. It includes a discussion on how welding can alter the microstructure in the heat affected zone, producing either excessive hardening or softening, and how these local changes create potential weaknesses that can lead to failure. This text reviews the range of welding and other joining technologies for AHSS and how they can be best used to maximize the potential of AHSS. - Reviews the properties and manufacturing techniques of advanced high strength steels (AHSS) - Examines welding processes, performance, and fatigue in AHSS - Focuses on AHSS welding and joining within the automotive industry
Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 1 reviews fundamentals and diffusion-controlled phase transformations. After a historical overview, chapters in part one discuss fundamental principles of thermodynamics, diffusion and kinetics as well as phase boundary interfaces. Chapters in part two go on to consider ferrite formation, proeutectoid ferrite and cementite transformations, pearlite formation and massive austenite-ferrite phase transformations. Part three discusses the mechanisms of bainite transformations, including carbide-containing and carbide-free bainite. The final part of the book considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations, dynamic strain-induced ferrite transformations (DIST) as well as the effects of magnetic fields and heating rates.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. - Discusses the fundamental principles of thermodynamics, diffusion and kinetics - Considers various transformations, including ferrite formation, proeutectoid ferrite and cementite transformations - Considers additional driving forces for transformation including nucleation and growth during austenite-to-ferrite phase transformations
Download or read book Engineering Materials written by and published by . This book was released on 1982 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to the Metallurgy of Iron and Steel written by Herbert Melville Boylston and published by . This book was released on 1928 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
