Download or read book Handbook Of Renewable Energy Technology written by Ahmed F Zobaa and published by World Scientific. This book was released on 2011-01-26 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effects of environmental, economic, social, political and technical factors have led to the rapid deployment of various sources of renewable energy-based power generation. The incorporation of these generation technologies have led to the development of a broad array of new methods and tools to integrate this new form of generation into the power system network. This book, arranged into six sections, highlights various renewable energy based generation technologies, and consists a series of papers written by experts in their respective fields of specialization.The Handbook of Renewable Energy Technology will be of great practical benefit to professionals, scientists and researchers in the relevant industries, and will be of interest to those of the general public wanting to know more about renewable energy technologies.
Download or read book Renewable Energy Technologies written by Lars A. Kristoferson and published by . This book was released on 1991 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed survey of the main areas of bio-energy and biomass, solar energy and hydro, wind and water power. The authors address the advantages and disadvantages of renewable energies, their appropriateness, and their socio-economic implications.
Download or read book Renewable Energy Technologies written by Jean-Claude Sabonnadière and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the emerging generation of renewable energy technologies, covering solar energy (photovoltaic, thermal and thermodynamic energy conversion), wind energy, marine energy, small hydropower, geothermal energy, biofuels, biogas and the use of wood as a substitute for fossil fuels.
Download or read book RENEWABLE ENERGY TECHNOLOGIES written by CHETAN SINGH SOLANKI and published by PHI Learning Pvt. Ltd.. This book was released on 2008-03-09 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a highly accessible introduction to the multi-disciplinary field of renewable energy sources—an area which is becoming increasingly important. It is intended to serve as a textbook for undergraduate electrical and mechanical engineering students and will also be useful for courses in environmental science. The book helps beginners to understand the basic energy conversion processes involved in various renewable energy based equipment such as solar photovoltaics, solar water heaters, wind turbines, and biomass plants. Under each technology, several possi-ble system configurations and their usages are considered. Step-by-step procedures are given to design and cost estimate several renewable energy based systems, designed for the given requirements. Numerous chapter-end problems are given to reinforce concepts, and for getting used to system design and system costing procedures. Besides students, this book will be immensely useful for individuals interested in learning and practising renewable energy technologies.
Download or read book Optimization in Renewable Energy Systems written by Ozan Erdinc and published by Butterworth-Heinemann. This book was released on 2017-02-25 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization in Renewable Energy Systems: Recent Perspectives covers all major areas where optimization techniques have been applied to reduce uncertainty or improve results in renewable energy systems (RES). Production of power with RES is highly variable and unpredictable, leading to the need for optimization-based planning and operation in order to maximize economies while sustaining performance. This self-contained book begins with an introduction to optimization, then covers a wide range of applications in both large and small scale operations, including optimum operation of electric power systems with large penetration of RES, power forecasting, transmission system planning, and DG sizing and siting for distribution and end-user premises. This book is an excellent choice for energy engineers, researchers, system operators, system regulators, and graduate students. - Provides chapters written by experts in the field - Goes beyond forecasting to apply optimization techniques to a wide variety of renewable energy system issues, from large scale to relatively small scale systems - Provides accompanying computer code for related chapters
Download or read book Renewable Energy Crash Course written by Eklas Hossain and published by Springer Nature. This book was released on 2021-06-12 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a concise reader-friendly introductory guide to understanding renewable energy technologies. By using simplified classroom-tested methods developed while teaching the subject to engineering students, the authors explain in simple language an otherwise complex subject in terms that enable readers to gain a rapid fundamental understanding of renewable energy, including basic principles, the different types, energy storage, grid integration, and economies. This powerful tutorial is a great resource for students, engineers, technicians, analysts, investors, and other busy professionals who need to quickly acquire a solid understanding of the science of renewable energy technology.
Download or read book Fundamentals and Applications of Renewable Energy written by Mehmet Kanoglu and published by McGraw Hill Professional. This book was released on 2019-06-14 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the principles and applications of today’s renewable energy sources and systems Written by a team of recognized experts and educators, this authoritative textbook offers comprehensive coverage of all major renewable energy sources. The book delves into the main renewable energy topics such as solar, wind, geothermal, hydropower, biomass, tidal, and wave, as well as hydrogen and fuel cells. By stressing real-world relevancy and practical applications, Fundamentals and Applications of Renewable Energy helps prepare students for a successful career in renewable energy. The text contains detailed discussions on the thermodynamics, heat transfer, and fluid mechanics aspects of renewable energy systems in addition to technical and economic analyses. Numerous worked-out example problems and over 850 end-of-chapter review questions reinforce main concepts, formulations, design, and analysis. Coverage includes: Renewable energy basics Thermal sciences overview Fundamentals and applications of Solar energy Wind energy Hydropower Geothermal energy Biomass energy Ocean energy Hydrogen and fuel cells • Economics of renewable energy • Energy and the environment
Download or read book Introduction to Energy written by Edward S. Cassedy and published by Cambridge University Press. This book was released on 2017-07-06 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the potential disruption of climate change, understanding energy issues and technologies is more important than ever if societies are to make informed choices on policy. Now in its third edition, Introduction to Energy explores the crucial issues connected to modern energy technology and its uses. Fully updated to respond to the substantial developments in the energy sector, the book expands on the relationships of energy use and climate change; of energy availability and the alleviation of world poverty; and of energy consumption and the sustainability of the lifestyles of people in the industrialized world. Directed at a broad readership, it assumes no prior technical expertise and avoids complex mathematical formulations, continuing to provide a standard for introductory energy courses. It is also a useful supplementary text for programs in public policy, business law and resource economics.
Download or read book Renewable Energy written by Martin Kaltschmitt and published by Springer Science & Business Media. This book was released on 2007-06-03 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilisation of renewable energies is not at all new; in the history of mankind renewable energies have for a long time been the primary possibility of generating energy. This only changed with industrial revolution when lignite and hard coal became increasingly more important. Later on, also crude oil gained importance. Offering the advantages of easy transportation and processing also as a raw material, crude oil has become one of the prime energy carriers applied today. Moreover, natural gas used for space heating and power provision as well as a transportation fuel has become increasingly important, as it is abundantly available and only requires low investments in terms of energy conversion facilities. As fossil energy carriers were increasingly used for energy generation, at least by the industrialised countries, the application of renewable energies decreased in absolute and relative terms; besides a few exceptions, renewable energies are of secondary importance with regard to overall energy generation.
Download or read book Electricity and Electronics for Renewable Energy Technology written by Ahmad Hemami and published by CRC Press. This book was released on 2017-09-29 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electricity and Electronics for Renewable Energy Technology: An Introduction provides a foundational understanding of electricity and the methods and devices specific to electricity from renewable sources. The book begins with a brief explanation of the necessary mathematics and then: Addresses the basics of electricity and relationships, motors and generators, transformers, and networks and distribution Tackles the key concepts associated with electronics, diodes and transistors, switching devices, and power converters Covers digital electronics from number systems and logic circuits to encoders and decoders Explores advanced subjects such as reactive power and the operation of a transistor A lab manual and PowerPoint presentation are available with qualifying course adoption. Featuring extensive review questions and practice problems at the end of each chapter, Electricity and Electronics for Renewable Energy Technology: An Introduction instills an essential knowledge of electricity and electronics required for work with renewable energy.
Download or read book Renewable Energy A Very Short Introduction written by Nick Jelley and published by Oxford University Press. This book was released on 2020-02-27 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy is vital for a good standard of living, and much of the world's population does not have enough. Affordable and adequate sources of power that do not cause climate change or pollution are crucial; and renewables provide the answer. Wind and solar farms can now provide the cheapest electricity in many parts of the world. Moreover, they could provide all of the world's energy needs. But while market forces are fast helping the transition from fossil fuels to renewables, there are opposing pressures, such as the USA's proposed withdrawal from the Paris Agreement, and the vested interests in fossil fuels. This Very Short Introduction describes the main renewable sources of energy- solar, wind, hydropower, and biomass- as well as the less well-developed ones- geothermal, tidal, and wave. Nick Jelley explains the challenges of integrating renewables into electricity grids, and the need for energy storage and for clean heat; and discusses the opportunities in developing countries for renewable energy to empower millions. He also considers international efforts and policies to support renewables and tackle climate change; and explains recent innovations in wind and solar energy production, battery storage, and in the emerging power-to-gas provision for clean heating. Throughout, he emphasises what renewable energy can deliver, and its importance in tackling climate change, and in improving health, welfare, and access to electricity. ABOUT THE SERIES: The Very Short Introductions series from Oxford University Press contains hundreds of titles in almost every subject area. These pocket-sized books are the perfect way to get ahead in a new subject quickly. Our expert authors combine facts, analysis, perspective, new ideas, and enthusiasm to make interesting and challenging topics highly readable.
Download or read book The Political Economy of Clean Energy Transitions written by Douglas Arent and published by Oxford University Press. This book was released on 2017 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: A volume on the political economy of clean energy transition in developed and developing regions, with a focus on the issues that different countries face as they transition from fossil fuels to lower carbon technologies.
Download or read book Handbook Of Renewable Energy Technology Systems written by Ramesh C Bansal and published by World Scientific. This book was released on 2021-08-13 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide, the effects of global warming, pollution due to power generation from fossil fuels, and its depletion have led to the rapid deployment of renewable energy-based power generation. The leading renewable technologies are wind and photovoltaic (PV) systems. The incorporation of this generation of technologies has led to the development of a broad array of new methods and tools to integrate renewable generation into power system networks.The Handbook of Renewable Energy Technology & Systems comprises 22 chapters, arranged into four sections, which present a comprehensive analysis of various renewable energy-based distributed generation (DG) technologies. Aspects of renewable energy covered include wind and photovoltaic power systems and technology, micro-grids, power electronic applications, power quality, and the protection of renewable distributed generation.
Download or read book Introduction to AI Techniques for Renewable Energy System written by Suman Lata Tripathi and published by CRC Press. This book was released on 2021-11-25 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to AI techniques for Renewable Energy System Artificial Intelligence (AI) techniques play an essential role in modeling, analysis, and prediction of the performance and control of renewable energy. The algorithms used to model, control, or predict performances of the energy systems are complicated, involving differential equations, enormous computing power, and time requirements. Instead of complex rules and mathematical routines, AI techniques can learn critical information patterns within a multidimensional information domain. Design, control, and operation of renewable energy systems require a long-term series of meteorological data such as solar radiation, temperature, or wind data. Such long-term measurements are often non-existent for most of the interest locations or, wherever they are available, they suffer from several shortcomings, like inferior quality of data, and in-sufficient long series. The book focuses on AI techniques to overcome these problems. It summarizes commonly used AI methodologies in renewal energy, with a particular emphasis on neural networks, fuzzy logic, and genetic algorithms. It outlines selected AI applications for renewable energy. In particular, it discusses methods using the AI approach for prediction and modeling of solar radiation, seizing, performances, and controls of the solar photovoltaic (PV) systems. Features Focuses on a significant area of concern to develop a foundation for the implementation of renewable energy system with intelligent techniques Showcases how researchers working on renewable energy systems can correlate their work with intelligent and machine learning approaches Highlights international standards for intelligent renewable energy systems design, reliability, and maintenance Provides insights on solar cell, biofuels, wind, and other renewable energy systems design and characterization, including the equipment for smart energy systems This book, which includes real-life examples, is aimed at undergraduate and graduate students and academicians studying AI techniques used in renewal energy systems.
Download or read book The Material Basis of Energy Transitions written by Alena Bleicher and published by Academic Press. This book was released on 2020-08-05 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Material Basis of Energy Transitions explores the intersection between critical raw material provision and the energy system. Chapters draw on examples and case studies involving energy technologies (e.g., electric power, transport) and raw material provision (e.g., mining, recycling), and consider these in their regional and global contexts. The book critically discusses issues such as the notion of criticality in the context of a circular economy, approaches for estimating the need for raw materials, certification schemes for raw materials, the role of consumers, and the impact of renewable energy development on resource conflicts. Each chapter deals with a specific issue that characterizes the interdependency between critical raw materials and renewable energies by examining case studies from a particular conceptual perspective. The book is a resource for students and researchers from the social sciences, natural sciences, and engineering, as well as interdisciplinary scholars interested in the field of renewable energies, the circular economy, recycling, transport, and mining. The book is also of interest to policymakers in the fields of renewable energy, recycling, and mining, professionals from the energy and resource industries, as well as energy experts and consultants looking for an interdisciplinary assessment of critical materials. - Provides a comprehensive overview of key issues related to the nexus between renewable energy and critical raw materials - Explores interdisciplinary perspectives from the natural sciences, engineering, and social sciences - Discusses critical strategies to address the nexus from a practitioner's perspective
Download or read book Introduction to Renewable Energy Conversions written by Sergio C. Capareda and published by CRC Press. This book was released on 2019-08-07 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Renewable Energy Conversions examines all the major renewable energy conversion technologies with the goal of enabling readers to formulate realistic resource assessments. The text provides step-by-step procedures for assessing renewable energy options and then moves to the design of appropriate renewable energy strategies. The goal is for future engineers to learn the process of making resource estimates through the introduction of more than 140 solved problems and over 165 engineering related equations. More than 120 figures and numerous tables explain each renewable energy conversion type. A solutions manual, PowerPoint slides, and lab exercises are available for instructors. Key Features Covers all major types of renewable energy with comparisons for use in energy systems Builds skills for evaluating energy usage versus environmental hazards and climate change factors Presents and explains the key engineering equations used to design renewable energy systems Uses a practical approach to design and analyze renewable energy conversions Offers a solutions manual, PowerPoint slides, and lab activity plans for instructors
Download or read book Introduction to Renewable Power Systems and the Environment with R written by Miguel F. Acevedo and published by CRC Press. This book was released on 2018-07-26 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Renewable Power Systems and the Environment with R showcases the fundamentals of electrical power systems while examining their relationships with the environment. To address the broad range of interrelated problems that come together when generating electricity, this reference guide ties together multiple engineering disciplines with applied sciences. The author merges chapters on thermodynamics, electricity, and environmental systems to make learning fluid and comfortable for students with different backgrounds. Additionally, this book provides users with the opportunity to execute computer examples and exercises that use the open source R system. Functions of the renpow R package have been described and used in this book in the context of specific examples. The author lays out a clear understanding of how electricity is produced around the world and focuses on the shift from carbon-based energy conversions to other forms including renewables. Each energy conversion system is approached both theoretically and practically to provide a comprehensive guide. Electrical circuits are introduced from the simplest circumstances of direct current (DC), progressing to more complex alternating current (AC) circuits, single phase and three-phase, and electromagnetic devices including generators and transformers. Thermodynamics are employed to understand heat engines and a variety of processes in electrochemical energy conversion, such as fuel cells. The book emphasizes the most prevalent renewable energy conversions in use today: hydroelectrical, wind, and solar. This book is an invaluable for students as a resource to help them understand those aspects of environment systems that motivate the development and utilization of renewable power systems technology.
