Download or read book Plastics Technology written by Christian Bonten and published by . This book was released on 2019-10-07 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory book covers the entire spectrum of plastics technology / engineering, from raw materials to finished plastic products. It is not just for university / college students in plastics technology and other engineering disciplines but also for beginners to the field in general. The interconnectivity between the different relevant knowledge areas of plastics technology, such as materials engineering, processing technology, and product development, is emphasized. A chapter "Plastics and the Environment" is also included, covering a topic (rightly) often of great concern to students and newcomers to the field. So includes numerous videos, conveniently linked via QR codes, to better demonstrate key processes visually.
Download or read book Introduction to Plastics Engineering written by Anshuman Shrivastava and published by William Andrew. This book was released on 2018-05-15 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Plastics Engineering provides a single reference covering the basics of polymer and plastics materials, and their properties, design, processing and applications in a practical way. The book discusses materials engineering through properties formulation, combining part design and processing to produce final products. This book will be a beneficial guide to materials engineers developing new formulations, processing engineers producing those formulations, and design and product engineers seeking to understand the materials and methods for developing new applications. The book incorporates material properties, engineering, processing, design, applications and sustainable and bio based solutions. Ideal for those just entering the industry, or transitioning between sectors, this is a quick, relevant and informative reference guide to plastics engineering and processing for engineers and plastics practitioners. - Provides a single unified reference covering plastics materials, properties, design, processing and applications - Offers end-to-end coverage of the industry, from formulation to part design, processing, and the final product - Serves as an ideal introductory book for new plastics engineers and students of plastics engineering - Provides a convenient reference for more experienced practitioners
Download or read book Introduction to Plastics Engineering written by Vijay K. Stokes and published by John Wiley & Sons. This book was released on 2020-04-02 with total page 1749 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authoritative introduction to all aspects of plastics engineering — offering both academic and industry perspectives in one complete volume. Introduction to Plastics Engineering provides a self-contained introduction to plastics engineering. A unique synergistic approach explores all aspects of material use — concepts, mechanics, materials, part design, part fabrication, and assembly — required for converting plastic materials, mainly in the form of small pellets, into useful products. Thermoplastics, thermosets, elastomers, and advanced composites, the four disparate application areas of polymers normally treated as separate subjects, are covered together. Divided into five parts — Concepts, Mechanics, Materials, Part Processing and Assembly, and Material Systems — this inclusive volume enables readers to gain a well-rounded, foundational knowledge of plastics engineering. Chapters cover topics including the structure of polymers, how concepts from polymer physics explain the macro behavior of plastics, evolving concepts for plastics use, simple mechanics principles and their role in plastics engineering, models for the behavior of solids and fluids, and the mechanisms underlying the stiffening of plastics by embedded fibers. Drawing from his over fifty years in both academia and industry, Author Vijay Stokes uses the synergy between fundamentals and applications to provide a more meaningful introduction to plastics. Examines every facet of plastics engineering from materials and fabrication methods to advanced composites Provides accurate, up-to-date information for students and engineers both new to plastics and highly experienced with them Offers a practical guide to large number of materials and their applications Addresses current issues for mechanical design, part performance, and part fabrication Introduction to Plastics Engineering is an ideal text for practicing engineers, researchers, and students in mechanical and plastics engineering and related industries.
Download or read book Plastics Technology Handbook Fourth Edition written by Manas Chanda and published by CRC Press. This book was released on 2006-12-19 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because the field of plastics is one of the fastest changing areas today, the need arises to offer relevant, comprehensive material on polymers. An established source of information on modern plastics, the Plastics Technology Handbook continues to provide up-to-date coverage on the properties, processing methods, and applications of polymers. Retaining the easy-to-follow structure of the previous editions, this fourth edition includes new topics of interest that reflect recent developments and lead to better insights into the molecular behavior of polymers. New to the Fourth Edition Advances in supramolecular polymerization, flame retardancy, polymer-based nanomedicines, and drug delivery The new concept of oxo-biodegradable polymers Broadened discussion on plastic foams and foam extrusion processes More information on the processing and applications of industrial polymers, including the emerging field of nanoblends Developments in polymer synthesis and applications, such as polymeric sensors, hydrogels and smart polymers, hyperbranched polymers, shape memory polymers, polymeric optical fibers, scavenger resins, polymer nanocomposites, polymerization-filled composites, and wood-polymer composites A state-of-the-art account of the various available methods for plastics recycling Advances in the use of polymers in packaging, construction, the automotive and aerospace industries, agriculture, electronics and electrical technology, biomedical applications, corrosion prevention, and sports and marine applications Plastics Technology Handbook, Fourth Edition thoroughly covers traditional industrial polymers and their processing methods as well as contemporary polymeric materials, recent trends, and the latest applications.
Download or read book Brydson s Plastics Materials written by Marianne Gilbert and published by William Andrew. This book was released on 2016-09-27 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field. - Presents a one-stop-shop for easily accessible information on plastics materials, now updated to include the latest biopolymers, high temperature engineering plastics, thermoplastic elastomers, and more - Includes thoroughly revised and reorganised material as contributed by an expert team who make the book relevant to all plastics engineers, materials scientists, and students of polymers - Includes the latest guidance on health, safety, and sustainability, including materials safety data sheets, local regulations, and a discussion of recycling issues
Download or read book Introduction to Plastics Recycling written by Vannessa Goodship and published by iSmithers Rapra Publishing. This book was released on 2007 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: As in the successful first edition, this book provides straightforward information on plastic materials and technology, including the options for recycling plastics, with special focus on mechanical recycling. This new edition reflects the great strides that have been made to increase recycling rates worldwide in recent years. It considers the expansion of infrastructure in the UK to support plastic recycling and major achievements that have been made in gaining widespread public support and participation for recycling schemes; specifically the need to manage waste on an individual household level. Current issues surrounding council recycling of plastic bottles, and the practice of providing free plastic carrier bags by supermarkets, are also considered. Biopolymers are expected to have a major impact on plastic markets in the future and therefore some of the issues of biodegradability versus recycling are expanded in this second edition, as is the wider context of life cycle analysis and legislation.
Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2016-09-15 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Materials, and Applications, Second Edition, covers both the polymer basics that are helpful to bring readers quickly up-to-speed if they are not familiar with a particular area of plastics processing and the recent developments that enable practitioners to discover which options best fit their requirements. New chapters added specifically cover polyamides, polyimides, and polyesters. Hot topics such as 3-D printing and smart plastics are also included, giving plastics engineers the information they need to take these embryonic technologies and deploy them in their own work. With the increasing demands for lightness and fuel economy in the automotive industry (not least due to CAFÉ standards), plastics will soon be used even further in vehicles. A new chapter has been added to cover the technology trends in this area, and the book has been substantially updated to reflect advancements in technology, regulations, and the commercialization of plastics in various areas. Recycling of plastics has been thoroughly revised to reflect ongoing developments in sustainability of plastics. Extrusion processing is constantly progressing, as have the elastomeric materials, fillers, and additives which are available. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. - Presents an authoritative source of practical advice for engineers, providing guidance from experts that will lead to cost savings and process improvements - Ideal introduction for both new engineers and experienced practitioners entering a new field or evaluating a new technology - Updated to include the latest technology, including 3D Printing, smart polymers, and thorough coverage of biopolymers and biodegradable plastics
Download or read book Handbook of Plastics Technologies written by Charles A. Harper and published by McGraw Hill Professional. This book was released on 2010-05-27 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand, design, and manufacture plastics This resource provides you with the state-of-the-art information for the design, manufacture and application of plastics as well as its cutting-edge usage in nanotechnology. Includes the latest industry specifications and standards Covers the latest recycling methods
Download or read book Plastics written by A. Brent Strong and published by Prentice Hall. This book was released on 2006 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics Processing Technology written by Edward A. Muccio and published by ASM International. This book was released on 1994-01-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a basic understanding of plastics processing technology at a level suitable for technicians, managers, buyers, quality assurance personnel, and engineers who have minimal experience with plastics. Highlights the key aspects of materials, thermodynamics, fluid technology, control, and tool/p
Download or read book Basics of Troubleshooting in Plastics Processing written by Muralisrinivasan Natamai Subramanian and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Basics of Troubleshooting in Plastics Processing is a condensed practical guide that gives the reader a broad introduction to properties of thermoplastics plastics, additives, the major processes (extrusion, injection molding, rotational molding, blow molding, and thermoforming), as well as troubleshooting. The main goal is to provide the plastics processor with an improved understanding of the basics by explaining the science behind the technology. Machine details are minimized as the emphasis is on processing problems and the defects in an effort to focus on basic root causes to problems and how to solve them. The book’s framework is troubleshooting in plastics processing because of the importance it has to the eventual production of high quality end products. Each chapter contains both practical and detailed technical information. This basic guide provides state-of-the-art information on: Processing problems and defects during manufacturing Plastics materials, their properties and characterization The plastics processing techniques Plastics additives Troubleshooting of the 5 main plastics processes References for further reading
Download or read book Plastics Engineering written by R.J. Crawford and published by Elsevier. This book was released on 2013-10-22 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first textbook to cover both properties and processing of reinforced and unreinforced plastics to this level. It assumes no prior knowledge of plastics and emphasizes the practical aspects of the subject. In this second edition over half the book has been rewritten and the remainder has been updated and reorganized. Early chapters give an introduction to the types of plastics which are currently available and describe how a designer goes about selection of a plastic for a particular application. Later chapters lead the reader into more advanced aspects of mechanical design and analysis of polymer melt flow. All techniques developed are illustrated by numerous worked examples, and several problems are given at the end of each chapter - the solutions to which form an Appendix.
Download or read book Plastics Materials and Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2003-10-10 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Materials and Processes: A Concise Encyclopedia is a resource for anyone with an interest in plastic materials and processes, from seasoned professionals to laypeople. Arranged in alphabetical order, it clearly explains all of the materials and processes as well as their major application areas and usages. Plastics Materials and Processes: A Concise Encyclopedia: Discusses and describes applications and practical uses of the materials and processes. Clear definitions and sufficient depth to satisfy the information seekers needs
Download or read book Life Cycle Engineering of Plastics written by L. Lundquist and published by Elsevier. This book was released on 2001-01-23 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book adds much to the already evolving field of Design for Environment; but it goes far beyond most works on this subject by surrounding the central notions of life cycle assessment with a scientific body of knowledge and with a more practical slant reflecting the reality of the organizations in which product development occurs. Through a focus on plastic products, the authors show the importance of making ties between basic technical knowledge and the process of life cycle engineering. Their approach offers a practical, deliberate way to make ecologically and economically sensible decisions about product reuse and recycling and other critical dimensions of product life behavior. They demonstrate a positive approach to designing products that fits into a sustainable economy through down-to-earth cases. While the book focuses on the life cycle engineering of plastics, it is only a short step to other materials and products. Beyond contributing to the technology of life cycle engineering, this text adds to the growing body of knowledge that argues for an fundamentally new way of thinking about economic and social activity--a new paradigm for sustainable social and industrial problem solving. Industrial ecology is such a new system for thinking about and implementing sustainability that draws its core set of ideas from the ecological world. Industrial ecology brings to the surface the idea of interdependence among members of a community-- natural or economic, and notes the material cycles that are central to a stable ecosystem. The life cycle engineering framework, coupled with sound scientific knowledge of materials behavior as articulated in this book, makes a giant step towards bringing the model of industrial ecology into everyday practice." From the Preface by John R. Ehrenfeld Director, MIT Technology, Business and Environment Program Center for Technology, Policy, and Industrial Development
Download or read book Green Plastics written by E. S. Stevens and published by Princeton University Press. This book was released on 2002 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Appendix includes formulas and procedures for making plastics.
Download or read book Plastics Processing written by Walter Michaeli and published by Hanser Gardner Publications. This book was released on 1995 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This overview of the essential methods of plastics processing includes basic principles, theory, and technical background information. Written as an introductory text, it enables the reader to understand the broad field of processing technologies and its relationship to properties and applications of plastics materials.
Download or read book Plastics Engineering written by R. J Crawford and published by Butterworth-Heinemann. This book was released on 2020-01-24 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Engineering, Fourth Edition, presents basic essentials on the properties and processing behaviour of plastics and composites. The book gives engineers and technologists a sound understanding of basic principles without the introduction of unduly complex levels of mathematics or chemistry. Early chapters discuss the types of plastics currently available and describe how designers select a plastic for a particular application. Later chapters guide the reader through the mechanical behaviour of materials, along with a detailed analysis of their major processing techniques and principles. All techniques are illustrated with numerous worked examples within each chapter, with further problems provided at the end.This updated edition has been thoroughly revised to reflect major changes in plastic materials and their processing techniques that have occurred since the previous edition. The plastics and processing techniques addressed within the book have been comprehensively updated to reflect current materials and technologies, with new worked examples and problems also included.
