Download or read book Introduction to Optical Engineering written by Francis T. S. Yu and published by Cambridge University Press. This book was released on 1997-05-13 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical devices are employed in an ever-increasing range of applications, from simple lenses to complex fibre-optic communication networks. This book provides a detailed introduction to modern optical engineering, covering the fundamental concepts as well as practical techniques and applications. Basic optical principles are presented, particularly reflection, refraction, aberrations, diffraction and interference. Building on this foundation, a wide variety of optical devices and processes are then discussed, including simple optical instruments, photodetectors, spatial light modulators, holography and lasers. Two chapters are devoted to linear system transforms and signal processing, and the book concludes with a chapter on fibre optics. The book contains many worked examples and over 250 problems (solutions manual for instructors available from the publishers). It will be invaluable to electrical engineering and physics undergraduates taking courses in optical engineering, photonics, and electro-optics.
Download or read book Optical Engineering Science written by Stephen Rolt and published by John Wiley & Sons. This book was released on 2020-01-07 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide for engineers and students that covers a wide range of optical design and optical metrology topics Optical Engineering Science offers a comprehensive and authoritative review of the science of optical engineering. The book bridges the gap between the basic theoretical principles of classical optics and the practical application of optics in the commercial world. Written by a noted expert in the field, the book examines a range of practical topics that are related to optical design, optical metrology and manufacturing. The book fills a void in the literature by coving all three topics in a single volume. Optical engineering science is at the foundation of the design of commercial optical systems, such as mobile phone cameras and digital cameras as well as highly sophisticated instruments for commercial and research applications. It spans the design, manufacture and testing of space or aerospace instrumentation to the optical sensor technology for environmental monitoring. Optics engineering science has a wide variety of applications, both commercial and research. This important book: Offers a comprehensive review of the topic of optical engineering Covers topics such as optical fibers, waveguides, aspheric surfaces, Zernike polynomials, polarisation, birefringence and more Targets engineering professionals and students Filled with illustrative examples and mathematical equations Written for professional practitioners, optical engineers, optical designers, optical systems engineers and students, Optical Engineering Science offers an authoritative guide that covers the broad range of optical design and optical metrology topics and their applications.
Download or read book Optical Engineering Fundamentals written by Bruce H. Walker and published by SPIE Press. This book was released on 1998 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text aims to expose students to the science of optics and optical engineering without the complications of advanced physics and mathematical theory.
Download or read book Introduction to Optical Testing written by Joseph M. Geary and published by SPIE Press. This book was released on 1993 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume in the SPIE Tutorial Text series presents a practical approach to optical testing, with emphasis on techniques, procedures, and instrumentation rather than mathematical analysis. The author provides the reader with a basic understanding of the measurements made and the tools used to make those measurements. Detailed information is given on how to measure and characterize imaging systems, perform optical bench measurements to determine first- and third-order properties of optical systems, set up and operate a Fizeau interferometer and evaluate fringe data, conduct beam diagnostics (such as wavefront sensing), and perform radiometric calibrations.
Download or read book Modern Optical Engineering written by Warren J. Smith and published by McGraw-Hill Companies. This book was released on 1990 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised version of a text which was first published in 1966. The book is designed as a general reference book for engineers and assumes a broad knowledge of current optical systems and their design. Additional topics include fibre optics, thin films and CAD systems.
Download or read book Lasers and Optical Engineering written by Pankaj K. Das and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: A textbook on lasers and optical engineering should include all aspects of lasers and optics; however, this is a large undertaking. The objective of this book is to give an introduction to the subject on a level such that under graduate students (mostly juniors/seniors), from disciplines like electrical engineering, physics, and optical engineering, can use the book. To achieve this goal, a lot of basic background material, central to the subject, has been covered in optics and laser physics. Students with an elementary knowledge of freshman physics and with no formal courses in electromagnetic theory should be able to follow the book, although for some sections, knowledge of electromagnetic theory, the Fourier transform, and linear systems would be highly beneficial. There are excellent books on optics, laser physics, and optical engineering. Actually, most of my knowledge was acquired through these. However, when I started teaching an undergraduate course in 1974, under the same heading as the title of this book, I had to use four books to cover the material I thought an electrical engineer needed for his introduction to the world of lasers and optical engineering. In my sabbatical year, 1980-1981, I started writing class notes for my students, so that they could get through the course by possibly buying only one book. Eventually, these notes grew with the help of my undergraduate and graduate students, and the final result is this book.
Download or read book Harnessing Light written by National Research Council and published by National Academies Press. This book was released on 1998-09-25 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical science and engineering affect almost every aspect of our lives. Millions of miles of optical fiber carry voice and data signals around the world. Lasers are used in surgery of the retina, kidneys, and heart. New high-efficiency light sources promise dramatic reductions in electricity consumption. Night-vision equipment and satellite surveillance are changing how wars are fought. Industry uses optical methods in everything from the production of computer chips to the construction of tunnels. Harnessing Light surveys this multitude of applications, as well as the status of the optics industry and of research and education in optics, and identifies actions that could enhance the field's contributions to society and facilitate its continued technical development.
Download or read book Optical Systems Engineering written by Keith Kasunic and published by McGraw Hill Professional. This book was released on 2011-06-05 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to optical system design and development Optical Systems Engineering emphasizes first-order, system-level estimates of optical performance. Building on the basic principles of optical design and engineering, the book uses numerous practical examples to illustrate the essential, real-world processes such as requirements analysis, feasibility and trade studies, subsystem interfaces, error budgets, requirements flow-down and allocation, component specifications, and vendor selection. Filled with detailed diagrams and photographs, this is an indispensable resource for anyone involved in developing optical, electro-optical, and infrared systems. Optical Systems Engineering covers: Systems engineering Geometrical optics Aberrations and image quality Radiometry Optical sources Detectors and focal plane arrays Optomechanical design
Download or read book Integrated Optomechanical Analysis written by Keith B. Doyle and published by SPIE Press. This book was released on 2002 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial presents optomechanical modeling techniques to effectively design and analyze high-performance optical systems. It discusses thermal and structural modeling methods that use finite-element analysis to predict the integrity and performance of optical elements and optical support structures. Includes accompanying CD-ROM with examples.
Download or read book Free Space Optical Systems Engineering written by Larry B. Stotts and published by John Wiley & Sons. This book was released on 2017-03-21 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gets you quickly up to speed with the theoretical and practical aspects of free space optical systems engineering design and analysis One of today's fastest growing system design and analysis disciplines is free space optical systems engineering for communications and remote sensing applications. It is concerned with creating a light signal with certain characteristics, how this signal is affected and changed by the medium it traverses, how these effects can be mitigated both pre- and post-detection, and if after detection, it can be differentiated from noise under a certain standard, e.g., receiver operating characteristic. Free space optical systems engineering is a complex process to design against and analyze. While there are several good introductory texts devoted to key aspects of optics—such as lens design, lasers, detectors, fiber and free space, optical communications, and remote sensing—until now, there were none offering comprehensive coverage of the basics needed for optical systems engineering. If you're an upper-division undergraduate, or first-year graduate student, looking to acquire a practical understanding of electro-optical engineering basics, this book is intended for you. Topics and tools are covered that will prepare you for graduate research and engineering in either an academic or commercial environment. If you are an engineer or scientist considering making the move into the opportunity rich field of optics, this all-in-one guide brings you up to speed with everything you need to know to hit the ground running, leveraging your experience and expertise acquired previously in alternate fields. Following an overview of the mathematical fundamentals, this book provides a concise, yet thorough coverage of, among other crucial topics: Maxwell Equations, Geometrical Optics, Fourier Optics, Partial Coherence theory Linear algebra, Basic probability theory, Statistics, Detection and Estimation theory, Replacement Model detection theory, LADAR/LIDAR detection theory, optical communications theory Critical aspects of atmospheric propagation in real environments, including commonly used models for characterizing beam, and spherical and plane wave propagation through free space, turbulent and particulate channels Lasers, blackbodies/graybodies sources and photodetectors (e.g., PIN, ADP, PMT) and their inherent internal noise sources The book provides clear, detailed discussions of the basics for free space optical systems design and analysis, along with a wealth of worked examples and practice problems—found throughout the book and on a companion website. Their intent is to help you test and hone your skill set and assess your comprehension of this important area. Free Space Optical Systems Engineering is an indispensable introduction for students and professionals alike.
Download or read book Engineering Optics 2 0 written by Xiangang Luo and published by Springer. This book was released on 2019-02-28 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive information on the history and status quo of a new research field, which we refer to as Engineering Optics 2.0. The content covers both the theoretical basis and the engineering aspects in connection with various applications. The field of Engineering Optics employs optical theories to practical applications in a broad range of areas. However, the foundation of traditional Engineering Optics was formed several hundred years ago, and the field has developed only very gradually. With technological innovations in both the fabrication and characterization of microstructures, the past few decades have witnessed many groundbreaking changes to the bases of optics, including the generalizing of refraction, reflection, diffraction, radiation and absorption theories. These new theories enable us to break through the barriers in traditional optical technologies, yielding revolutionary advances in traditional optical systems such as microscopes, telescopes and lithography systems.
Download or read book Practical Electronics for Optical Design and Engineering written by Scott W. Teare and published by . This book was released on 2016 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides a functional overview of electronics and an appreciation for how knowledge of electronics can enhance optical engineering projects. The first six chapters focus on a wide range of circuits that are fundamental to understanding and working with electronics. This presentation is supplemented by techniques for making electronic measurements and for moving data from the sensor to the computer. The next seven chapters introduce electronic devices of interest to optical engineers and build on the earlier chapters. Examples are provided throughout the book that range from simple calculations to sample MATLAB scripts. The aim of the MATLAB-based examples is to support an understanding of the fundamentals and relationships behind the electronics, and to provide a starting point for creating customized code"--
Download or read book Optics for Engineers written by Charles A. DiMarzio and published by CRC Press. This book was released on 2011-08-09 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of optics has become central to major developments in medical imaging, remote sensing, communication, micro- and nanofabrication, and consumer technology, among other areas. Applications of optics are now found in products such as laser printers, bar-code scanners, and even mobile phones. There is a growing need for engineers to understan
Download or read book Introduction to Nonimaging Optics written by Julio Chaves and published by CRC Press. This book was released on 2017-12-19 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Nonimaging Optics covers the theoretical foundations and design methods of nonimaging optics, as well as key concepts from related fields. This fully updated, revised, and expanded Second Edition: Features a new and intuitive introduction with a basic description of the advantages of nonimaging optics Adds new chapters on wavefronts for a prescribed output (irradiance or intensity), infinitesimal étendue optics (generalization of the aplanatic optics), and Köhler optics and color mixing Incorporates new material on the simultaneous multiple surface (SMS) design method in 3-D, integral invariants, and étendue 2-D Contains 21 chapters, 24 fully worked and several other examples, and 1,000+ illustrations, including photos of real devices Addresses applications ranging from solar energy concentration to illumination engineering Introduction to Nonimaging Optics, Second Edition invites newcomers to explore the growing field of nonimaging optics, while providing seasoned veterans with an extensive reference book.
Download or read book Introduction to Image Stabilization written by Scott W. Teare and published by SPIE Press. This book was released on 2006 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of image stabilization has grown to the point that it is now a common component of modern optical systems for imaging, communications, and remote-sensing applications. The benefits of image stabilization to astronomical research alone are so rich that it is common for astronomical telescopes, built over the last century, to be retrofitted with fast steering mirrors and tip-tilt sensors to extend their useful lifetimes. This text provides the basics of image stabilization starting with a consideration of the cause of image blurring and an introduction to the components commonly used in constructing a stabilized imaging system. With this foundation, an example image stabilized system is described and used to introduce some of the important parameters in evaluating the performance of image stabilization systems. As image stabilization systems are key components of adaptive optics systems, the more sophisticated sensing and correction devices used in this area are briefly addressed. Rather than being a mathematical, rigorous treatment of image stabilization, it provides the basic ideas in an easy-to-read format.
Download or read book Optics For Dummies written by Galen C. Duree, Jr. and published by John Wiley & Sons. This book was released on 2011-08-02 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The easy way to shed light on Optics In general terms, optics is the science of light. More specifically, optics is a branch of physics that describes the behavior and properties of light?including visible, infrared, and ultraviolet?and the interaction of light with matter. Optics For Dummies gives you an approachable introduction to optical science, methods, and applications. You'll get plain-English explanations of the nature of light and optical effects; reflection, refraction, and diffraction; color dispersion; optical devices, industrial, medical, and military applications; as well as laser light fundamentals. Tracks a typical undergraduate optics course Detailed explanations of concepts and summaries of equations Valuable tips for study from college professors If you're taking an optics course for your major in physics or engineering, let Optics For Dummies shed light on the subject and help you succeed!
Download or read book OPTICAL SYSTEM DESIGN written by Robert Fischer and published by McGraw Hill Professional. This book was released on 2000-07-21 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic resource provides a clear, well-illustrated introduction to the essentials of optical design-from basic principles to cutting-edge design methods.
