Download or read book Introduction to Modern Instrumentation written by Dardo Oscar Guaraglia and published by Walter de Gruyter GmbH & Co KG. This book was released on 2014-01-01 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural hazards and anthropic activities threaten the human environment. The gathering of field data is needed so as to quantify the impact of such activities. To gather the necessary data researchers nowadays use a great variety of new instruments based on electronics. Yet, the working principles of this new instrumentation might not be well understood by some potential users. All operators of these new tools must gain proper insight so as to be able to judge whether the instrument is selected appropriately and functions adequately. This book attempts to demonstrate some characteristics that are not easy to understand by the uninitiated in the use of electronic instruments. The material presented in this book was prepared with the purpose of reflecting the technological changes that have occurred in environmental modern instrumentation in the last few decades. The book is intended for students of hydrology, hydraulics, oceanography, meteorology and environmental sciences. Basic concepts of electronics, special physics principles and signal processing are introduced in the first chapters in order to enable the reader to follow the topics developed in the book, without any prior knowledge of these matters. The instruments are explained in detail and several examples are introduced to show their measuring limitations. Enough mathematical fundamentals are given to allow the reader to reach a good quantitative knowledge.
Download or read book Modern Instrumentation written by G Silverman and published by CRC Press. This book was released on 1995-01-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern science and engineering relies heavily on understanding computer hardware and software in order to make effective use of these tools in the laboratory and industrial environments. The authors of Modern Instrumentation: A Computer Approach have succeeded in producing a highly readable source that will serve both newcomers to the field as well as experienced professionals. Including both fundamentals and applications, the book first describes the role of the computer in instrument systems and provides numerous practical examples. The second part of the book explores specific software packages and their capabilities for applications such as, instrument design and simulation, data acquisition, data processing, and the potential of artificial intelligence in instrument design. Because of the full integration of theory with practical applications of leading software packages, this book is an extremely useful reference for those who use computer-based instrument technology for data acquisition and who are involved with hardware or software development for laboratory and process control.
Download or read book Introduction to Instrumentation and Measurements written by Robert B. Northrop and published by CRC Press. This book was released on 2018-09-03 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weighing in on the growth of innovative technologies, the adoption of new standards, and the lack of educational development as it relates to current and emerging applications, the third edition of Introduction to Instrumentation and Measurements uses the authors’ 40 years of teaching experience to expound on the theory, science, and art of modern instrumentation and measurements (I&M). What’s New in This Edition: This edition includes material on modern integrated circuit (IC) and photonic sensors, micro-electro-mechanical (MEM) and nano-electro-mechanical (NEM) sensors, chemical and radiation sensors, signal conditioning, noise, data interfaces, and basic digital signal processing (DSP), and upgrades every chapter with the latest advancements. It contains new material on the designs of micro-electro-mechanical (MEMS) sensors, adds two new chapters on wireless instrumentation and microsensors, and incorporates extensive biomedical examples and problems. Containing 13 chapters, this third edition: Describes sensor dynamics, signal conditioning, and data display and storage Focuses on means of conditioning the analog outputs of various sensors Considers noise and coherent interference in measurements in depth Covers the traditional topics of DC null methods of measurement and AC null measurements Examines Wheatstone and Kelvin bridges and potentiometers Explores the major AC bridges used to measure inductance, Q, capacitance, and D Presents a survey of sensor mechanisms Includes a description and analysis of sensors based on the giant magnetoresistive effect (GMR) and the anisotropic magnetoresistive (AMR) effect Provides a detailed analysis of mechanical gyroscopes, clinometers, and accelerometers Contains the classic means of measuring electrical quantities Examines digital interfaces in measurement systems Defines digital signal conditioning in instrumentation Addresses solid-state chemical microsensors and wireless instrumentation Introduces mechanical microsensors (MEMS and NEMS) Details examples of the design of measurement systems Introduction to Instrumentation and Measurements is written with practicing engineers and scientists in mind, and is intended to be used in a classroom course or as a reference. It is assumed that the reader has taken core EE curriculum courses or their equivalents.
Download or read book Introduction to Instrumentation and Measurements written by Robert B. Northrop and published by CRC Press. This book was released on 2005-06-28 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge of instrumentation is critical in light of the highly sensitive and precise requirements of modern processes and systems. Rapid development in instrumentation technology coupled with the adoption of new standards makes a firm, up-to-date foundation of knowledge more important than ever in most science and engineering fields. Understanding this, Robert B. Northrop produced the best-selling Introduction to Instrumentation and Measurements in 1997. The second edition continues to provide in-depth coverage of a wide array of modern instrumentation and measurement topics, updated to reflect advances in the field. See What's New in the Second Edition: Anderson Current Loop technology Design of optical polarimeters and their applications Photonic measurements with photomultipliers and channel-plate photon sensors Sensing of gas-phase analytes (electronic "noses") Using the Sagnac effect to measure vehicle angular velocity Micromachined, vibrating mass, and vibrating disk rate gyros Analysis of the Humphrey air jet gyro Micromachined IC accelerometers GPS and modifications made to improve accuracy Substance detection using photons Sections on dithering, delta-sigma ADCs, data acquisition cards, the USB, and virtual instruments and PXI systems Based on Northrop's 40 years of experience, Introduction to Instrumentation and Measurements, Second Edition is unequalled in its depth and breadth of coverage.
Download or read book Introduction to Modern Instrumentation Methods and Techniques written by Sachchidanand Shukla and published by Arcler Press. This book was released on 2019-11 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Instrumentation Methods and Techniques is a book which aims to discuss the instrumentation methods or techniques which are used for the purpose of analysis. This book includes the classification of instrumentation and fundamental function of the techniques. This book provides the readers with a detailed description about the mass spectrometry and the experimental methods which are used for optical spectroscopy. There are certain surface analysis techniques which are highlighted in this book. The insights of some topics have been provided to the readers in the second half of this book which includes nuclear magnetic resonance spectroscopy, UV/visible spectrophotometry and potentiometric analysis. The book is concluded with certain description about the infrared spectroscopy.
Download or read book Introduction to Instrumentation in Life Sciences written by Prakash Singh Bisen and published by CRC Press. This book was released on 2012-09-26 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation is central to the study of physiology and genetics in living organisms, especially at the molecular level. Numerous techniques have been developed to address this in various biological disciplines, creating a need to understand the physical principles involved in the operation of research instruments and the parameters required in using them. Introduction to Instrumentation in Life Sciences fills this need by addressing different aspects of tools that hold the keys to cutting-edge research and innovative applications, from basic techniques to advanced instrumentation. The text describes all topics so even beginners can easily understand the theoretical and practical aspects. Comprehensive chapters encompass well-defined methodology that describes the instruments and their corresponding applications in different scientific fields. The book covers optical and electron microscopy; micrometry, especially in microbial taxonomy; pH meters and oxygen electrodes; chromatography for separation and purification of products from complex mixtures; spectroscopic and spectrophotometric techniques to determine structure and function of biomolecules; preparative and analytical centrifugation; electrophoretic techniques; x-ray microanalysis including crystallography; applications of radioactivity, including autoradiography and radioimmunoassays; and fermentation technology and subsequent separation of products of interest. The book is designed to serve a wide range of students and researchers in diversified fields of life sciences: pharmacy, biotechnology, microbiology, biochemistry, and environmental sciences. It introduces different aspects of basic experimental methods and instrumentation. The book is unique in its broad subject coverage, incorporating fundamental techniques as well as applications of modern molecular and proteomic tools that are the basis for state-of-the-art research. The text emphasizes techniques encountered both in practical classes and in high-throughput environments used in modern industry. As a further aid to students, the authors provide well-illustrated diagrams to explain the principles and theories behind the instruments described.
Download or read book Real World Instrumentation with Python written by John M. Hughes and published by "O'Reilly Media, Inc.". This book was released on 2010-11-15 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to develop your own applications to monitor or control instrumentation hardware. Whether you need to acquire data from a device or automate its functions, this practical book shows you how to use Python's rapid development capabilities to build interfaces that include everything from software to wiring. You get step-by-step instructions, clear examples, and hands-on tips for interfacing a PC to a variety of devices. Use the book's hardware survey to identify the interface type for your particular device, and then follow detailed examples to develop an interface with Python and C. Organized by interface type, data processing activities, and user interface implementations, this book is for anyone who works with instrumentation, robotics, data acquisition, or process control. Understand how to define the scope of an application and determine the algorithms necessary, and why it's important Learn how to use industry-standard interfaces such as RS-232, RS-485, and GPIB Create low-level extension modules in C to interface Python with a variety of hardware and test instruments Explore the console, curses, TkInter, and wxPython for graphical and text-based user interfaces Use open source software tools and libraries to reduce costs and avoid implementing functionality from scratch
Download or read book Introduction to Modern Instrumentation written by Dardo Oscar Guaraglia and published by . This book was released on 2014 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: A great variety of new instruments based on electronics are used by professionals in environmental research. The technological changes that have occurred in the last few decades have not yet been reflected in academic literature, and this new instrumentation remains somewhat unknown to its possible users. This book attempts to make clear some characteristics of environmental instruments to those uninitiated in the use of electronic instruments.
Download or read book Introduction to Instrumentation and Measurements written by Robert B. Northrop and published by CRC Press. This book was released on 2018-09-03 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weighing in on the growth of innovative technologies, the adoption of new standards, and the lack of educational development as it relates to current and emerging applications, the third edition of Introduction to Instrumentation and Measurements uses the authors’ 40 years of teaching experience to expound on the theory, science, and art of modern instrumentation and measurements (I&M). What’s New in This Edition: This edition includes material on modern integrated circuit (IC) and photonic sensors, micro-electro-mechanical (MEM) and nano-electro-mechanical (NEM) sensors, chemical and radiation sensors, signal conditioning, noise, data interfaces, and basic digital signal processing (DSP), and upgrades every chapter with the latest advancements. It contains new material on the designs of micro-electro-mechanical (MEMS) sensors, adds two new chapters on wireless instrumentation and microsensors, and incorporates extensive biomedical examples and problems. Containing 13 chapters, this third edition: Describes sensor dynamics, signal conditioning, and data display and storage Focuses on means of conditioning the analog outputs of various sensors Considers noise and coherent interference in measurements in depth Covers the traditional topics of DC null methods of measurement and AC null measurements Examines Wheatstone and Kelvin bridges and potentiometers Explores the major AC bridges used to measure inductance, Q, capacitance, and D Presents a survey of sensor mechanisms Includes a description and analysis of sensors based on the giant magnetoresistive effect (GMR) and the anisotropic magnetoresistive (AMR) effect Provides a detailed analysis of mechanical gyroscopes, clinometers, and accelerometers Contains the classic means of measuring electrical quantities Examines digital interfaces in measurement systems Defines digital signal conditioning in instrumentation Addresses solid-state chemical microsensors and wireless instrumentation Introduces mechanical microsensors (MEMS and NEMS) Details examples of the design of measurement systems Introduction to Instrumentation and Measurements is written with practicing engineers and scientists in mind, and is intended to be used in a classroom course or as a reference. It is assumed that the reader has taken core EE curriculum courses or their equivalents.
Download or read book Instrumentation and Control Systems written by William Bolton and published by Elsevier. This book was released on 2004-06-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a clear and readable style, Bill Bolton addresses the basic principles of modern instrumentation and control systems, including examples of the latest devices, techniques and applications. Unlike the majority of books in this field, only a minimal prior knowledge of mathematical methods is assumed. The book focuses on providing a comprehensive introduction to the subject, with Laplace presented in a simple and easily accessible form, complimented by an outline of the mathematics that would be required to progress to more advanced levels of study. Taking a highly practical approach, Bill Bolton combines underpinning theory with numerous case studies and applications throughout, to enable the reader to apply the content directly to real-world engineering contexts. Coverage includes smart instrumentation, DAQ, crucial health and safety considerations, and practical issues such as noise reduction, maintenance and testing. An introduction to PLCs and ladder programming is incorporated in the text, as well as new information introducing the various software programmes used for simulation. Problems with a full answer section are also included, to aid the reader’s self-assessment and learning, and a companion website (for lecturers only) at http://textbooks.elsevier.com features an Instructor’s Manual including multiple choice questions, further assignments with detailed solutions, as well as additional teaching resources. The overall approach of this book makes it an ideal text for all introductory level undergraduate courses in control engineering and instrumentation. It is fully in line with latest syllabus requirements, and also covers, in full, the requirements of the Instrumentation & Control Principles and Control Systems & Automation units of the new Higher National Engineering syllabus from Edexcel. * Assumes minimal prior mathematical knowledge, creating a highly accessible student-centred text * Problems, case studies and applications included throughout, with a full set of answers at the back of the book, to aid student learning, and place theory in real-world engineering contexts * Free online lecturer resources featuring supporting notes, multiple-choice tests, lecturer handouts and further assignments and solutions
Download or read book Chemical Analysis written by Francis Rouessac and published by John Wiley & Sons. This book was released on 2013-05-06 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated, Chemical Analysis: Second Edition is an essential introduction to a wide range of analytical techniques and instruments. Assuming little in the way of prior knowledge, this text carefully guides the reader through the more widely used and important techniques, whilst avoiding excessive technical detail. Provides a thorough introduction to a wide range of the most important and widely used instrumental techniques Maintains a careful balance between depth and breadth of coverage Includes examples, problems and their solutions Includes coverage of latest developments including supercritical fluid chromatography and capillary electrophoresis
Download or read book Introduction to Instrumentation Sensors and Process Control written by William C. Dunn and published by Artech House Publishers. This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This clear, easy-to-comprehend resource offers a state-of-art treatment of the instrumentation, sensors and process control used in modern manufacturing. The book covers a wide range of technologies and techniques, fully explaining important related terminology. You learn how to use microprocessors for both analog and digital process control, as well as signal conditioning. Additionally, you gain a thorough understanding of the various types of valves and actuators used for flow control.
Download or read book INTRODUCTION TO MEASUREMENTS AND INSTRUMENTATION written by ARUN K. GHOSH and published by PHI Learning Pvt. Ltd.. This book was released on 2012-10-16 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of this highly readable and well-received book presents the subject of measurement and instrumentation systems as an integrated and coherent text suitable for a one-semester course for undergraduate students of Instrumentation Engineering, as well as for instrumentation course/paper for Electrical/Electronics disciplines. Modern scientific world requires an increasing number of complex measurements and instruments. The subject matter of this well-planned text is designed to ensure that the students gain a thorough understanding of the concepts and principles of measurement of physical quantities and the related transducers and instruments. This edition retains all the features of its previous editions viz. plenty of worked-out examples, review questions culled from examination papers of various universities for practice and the solutions to numerical problems and other additional information in appendices. NEW TO THIS EDITION Besides the inclusion of a new chapter on Hazardous Areas and Instrumentation(Chapter 15), various new sections have been added and existing sections modified in the following chapters: Chapter 3 Linearisation and Spline interpolation Chapter 5 Classifications of transducers, Hall effect, Piezoresistivity, Surface acoustic waves, Optical effects (This chapter has been thoroughly modified) Chapter 6 Proximitys sensors Chapter 8 Hall effect and Saw transducers Chapter 9 Proving ring, Prony brake, Industrial weighing systems, Tachometers Chapter 10 ITS-90, SAW thermometer Chapter 12 Glass gauge, Level switches, Zero suppression and Zero elevation, Level switches Chapter 13 The section on ISFET has been modified substantially
Download or read book An Introduction to Biomedical Instrumentation written by D. J. Dewhurst and published by Elsevier. This book was released on 2014-05-18 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Biomedical Instrumentation presents a course of study and applications covering the basic principles of medical and biological instrumentation, as well as the typical features of its design and construction. The book aims to aid not only the cognitive domain of the readers, but also their psychomotor domain as well. Aside from the seminar topics provided, which are divided into 27 chapters, the book complements these topics with practical applications of the discussions. Figures and mathematical formulas are also given. Major topics discussed include the construction, handling, and utilization of the instruments; current, voltage, resistance, and meters; diodes and transistors; power supply; and storage and processing of data. The text will be invaluable to medical electronics students who need a reference material to help them learn how to use competently and confidently the equipment that are important in their field.
Download or read book Introduction to Electrophysiological Methods and Instrumentation written by Franklin Bretschneider and published by Academic Press. This book was released on 2018-11-13 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Electrophysiological Methods and Instrumentation, Second Edition covers all topics of interest to electrophysiologists, neuroscientists and neurophysiologists, from the reliable penetration of cells and the behavior and function of the equipment, to the mathematical tools available for analyzing data. It discusses the pros and cons of techniques and methods used in electrophysiology and how to avoid pitfalls. Although the basics of electrophysiological techniques remain the principal purpose of this second edition, it now integrates several current developments, including, amongst others, automated recording for high throughput screening and multimodal recordings to correlate electrical activity with other physiological parameters collected by optical means. This book provides the electrophysiologist with the tools needed to understand his or her equipment and how to acquire and analyze low-voltage biological signals. Introduces possibilities and solutions, along with the problems, pitfalls, and artefacts of equipment and electrodes Discusses the particulars of recording from brain tissue slices, oocytes and planar bilayers Describes optical methods pertinent to electrophysiological practice Presents the fundamentals of signal processing of analogue signals, spike trains and single channel recordings, along with procedures for signal recording and processing Includes appendices on electrical safety and foundations of useful mathematical tools
Download or read book Instrumentation and Control Systems written by William Bolton and published by Newnes. This book was released on 2015-08-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation and Control Systems addresses the basic principles of modern instrumentation and control systems, including examples of the latest devices, techniques and applications in a clear and readable style. Unlike the majority of books in this field, only a minimal prior knowledge of mathematical methods is assumed. The book focuses on providing a comprehensive introduction to the subject, with Laplace presented in a simple and easily accessible form, complimented by an outline of the mathematics that would be required to progress to more advanced levels of study. Taking a highly practical approach, the author combines underpinning theory with numerous case studies and applications throughout, to enable the reader to apply the content directly to real-world engineering contexts. Coverage includes smart instrumentation, DAQ, crucial health and safety considerations, and practical issues such as noise reduction, maintenance and testing. PLCs and ladder programming is incorporated in the text, as well as new information introducing the various software programs used for simulation. The overall approach of this book makes it an ideal text for all introductory level undergraduate courses in control engineering and instrumentation. It is fully in line with latest syllabus requirements, and also covers, in full, the requirements of the Instrumentation & Control Principles and Control Systems & Automation units of the new Higher National Engineering syllabus from Edexcel. Completely updated Assumes minimal prior mathematical knowledge Highly accessible student-centred text Includes an extensive collection of problems, case studies and applications, with a full set of answers at the back of the book Helps placing theory in real-world engineering contexts
Download or read book Introduction to Modern Liquid Chromatography written by Lloyd R. Snyder and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest edition of the authoritative reference to HPLC High-performance liquid chromatography (HPLC) is today the leading technique for chemical analysis and related applications, with an ability to separate, analyze, and/or purify virtually any sample. Snyder and Kirkland's Introduction to Modern Liquid Chromatography has long represented the premier reference to HPLC. This Third Edition, with John Dolan as added coauthor, addresses important improvements in columns and equipment, as well as major advances in our understanding of HPLC separation, our ability to solve problems that were troublesome in the past, and the application of HPLC for new kinds of samples. This carefully considered Third Edition maintains the strengths of the previous edition while significantly modifying its organization in light of recent research and experience. The text begins by introducing the reader to HPLC, its use in relation to other modern separation techniques, and its history, then leads into such specific topics as: The basis of HPLC separation and the general effects of different experimental conditions Equipment and detection The column—the "heart" of the HPLC system Reversed-phase separation, normal-phase chromatography, gradient elution, two-dimensional separation, and other techniques Computer simulation, qualitative and quantitative analysis, and method validation and quality control The separation of large molecules, including both biological and synthetic polymers Chiral separations, preparative separations, and sample preparation Systematic development of HPLC separations—new to this edition Troubleshooting tricks, techniques, and case studies for both equipment and chromatograms Designed to fulfill the needs of the full range of HPLC users, from novices to experts, Introduction to Modern Liquid Chromatography, Third Edition offers the most up-to-date, comprehensive, and accessible survey of HPLC methods and applications available.
