Download or read book Microelectronic Devices written by Keith Leaver and published by World Scientific. This book was released on 1997 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this introductory book sets out clearly and concisely the principles of operation of the semiconductor devices that lie at the heart of the microelectronic revolution. The book aims to teach the reader how semiconductor devices are modelled. It begins by providing a firm background in the relevant semiconductor physics. These ideas are then used to construct both circuit models and mathematical models for diodes, bipolar transistors and MOSFETs. It also describes the processes involved in fabricating silicon chips containing these devices. The first edition has already proved a highly useful textbook to first and second year degree students in electrical and electronic engineering, and related disciplines. It is also useful to HND students in similar subject areas, and as supplementary reading for anyone involved in integrated circuit design and fabrication.
Download or read book Introduction to Microelectronic Fabrication written by Richard C. Jaeger and published by Pearson. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Theory and Fabrication of Integrated Circuits. The author's goal in writing this text was to present a concise survey of the most up-to-date techniques in the field. It is devoted exclusively to processing, and is highlighted by careful explanations, clear, simple language, and numerous fully-solved example problems. This work assumes a minimal knowledge of integrated circuits and of terminal behavior of electronic components such as resistors, diodes, and MOS and bipolar transistors.
Download or read book Introduction to Microelectronic Devices written by David L. Pulfrey and published by . This book was released on 1989 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardware -- general.
Download or read book Introduction to Microelectronics to Nanoelectronics written by Manoj Kumar Majumder and published by CRC Press. This book was released on 2020-11-24 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focussing on micro- and nanoelectronics design and technology, this book provides thorough analysis and demonstration, starting from semiconductor devices to VLSI fabrication, designing (analog and digital), on-chip interconnect modeling culminating with emerging non-silicon/ nano devices. It gives detailed description of both theoretical as well as industry standard HSPICE, Verilog, Cadence simulation based real-time modeling approach with focus on fabrication of bulk and nano-devices. Each chapter of this proposed title starts with a brief introduction of the presented topic and ends with a summary indicating the futuristic aspect including practice questions. Aimed at researchers and senior undergraduate/graduate students in electrical and electronics engineering, microelectronics, nanoelectronics and nanotechnology, this book: Provides broad and comprehensive coverage from Microelectronics to Nanoelectronics including design in analog and digital electronics. Includes HDL, and VLSI design going into the nanoelectronics arena. Discusses devices, circuit analysis, design methodology, and real-time simulation based on industry standard HSPICE tool. Explores emerging devices such as FinFETs, Tunnel FETs (TFETs) and CNTFETs including their circuit co-designing. Covers real time illustration using industry standard Verilog, Cadence and Synopsys simulations.
Download or read book Integrated Microelectronic Devices written by Jesús A. del Alamo and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The central goal of this book is to present the fundamentals of semiconductor device operation with relevance to modern integrated microelectronics (as opposed to, say, photonics, energy conversion devices, or power electronics). This means that no optical devices nor power devices of any kind are described. In contrast, emphasis is devoted to frequency response, layout, geometrical effects, parasitic issues and modeling in integrated microelectronics devices (transistors and diodes). In spite of this focus, the concepts learned here are highly applicable in other device contexts. This book should be a great resource for a broad range of students with a diverse set of interests."--
Download or read book Plasma Electronics written by Toshiaki Makabe and published by CRC Press. This book was released on 2006-03-27 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Without plasma processing techniques, recent advances in microelectronics fabrication would not have been possible. But beyond simply enabling new capabilities, plasma-based techniques hold the potential to enhance and improve many processes and applications. They are viable over a wide range of size and time scales, and can be used for deposition,
Download or read book Top Down Digital VLSI Design written by Hubert Kaeslin and published by Morgan Kaufmann. This book was released on 2014-12-07 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Top-Down VLSI Design: From Architectures to Gate-Level Circuits and FPGAs represents a unique approach to learning digital design. Developed from more than 20 years teaching circuit design, Doctor Kaeslin's approach follows the natural VLSI design flow and makes circuit design accessible for professionals with a background in systems engineering or digital signal processing. It begins with hardware architecture and promotes a system-level view, first considering the type of intended application and letting that guide your design choices. Doctor Kaeslin presents modern considerations for handling circuit complexity, throughput, and energy efficiency while preserving functionality. The book focuses on application-specific integrated circuits (ASICs), which along with FPGAs are increasingly used to develop products with applications in telecommunications, IT security, biomedical, automotive, and computer vision industries. Topics include field-programmable logic, algorithms, verification, modeling hardware, synchronous clocking, and more. - Demonstrates a top-down approach to digital VLSI design. - Provides a systematic overview of architecture optimization techniques. - Features a chapter on field-programmable logic devices, their technologies and architectures. - Includes checklists, hints, and warnings for various design situations. - Emphasizes design flows that do not overlook important action items and which include alternative options when planning the development of microelectronic circuits.
Download or read book Microelectronic Circuits and Devices written by and published by . This book was released on 1990 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Microelectronics written by Behzad Razavi and published by John Wiley & Sons. This book was released on 2013-04-08 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Microelectronics, 2nd Edition is designed to build a strong foundation in both design and analysis of electronic circuits this text offers conceptual understanding and mastery of the material by using modern examples to motivate and prepare readers for advanced courses and their careers. The books unique problem-solving framework enables readers to deconstruct complex problems into components that they are familiar with which builds the confidence and intuitive skills needed for success.
Download or read book Microelectronic Devices and Circuits written by Clifton G. Fonstad and published by McGraw-Hill Companies. This book was released on 1994 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining solid state devices with electronic circuits for an introductory-level microelectronics course, this textbook offers an integrated approach so that students can truly understand how a circuit works. A concise writing style is employed, with the right level of detail and physics to help students understand how a device works. Other features include an emphasis on modelling of electronic devices, and analysis of non-linear circuits. Spice problems, worked examples and end-of-chapter problems are included.
Download or read book The Science and Engineering of Microelectronic Fabrication written by Stephen A. Campbell and published by Oxford University Press, USA. This book was released on 1996 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Engineering of Microelectronic Fabrication provides an introduction to microelectronic processing. Geared towards a wide audience, it may be used as a textbook for both first year graduate and upper level undergraduate courses and as a handy reference for professionals. The text covers all the basic unit processes used to fabricate integrated circuits including photolithography, plasma and reactive ion etching, ion implantation, diffusion, oxidation, evaporation, vapor phase epitaxial growth, sputtering and chemical vapor deposition. Advanced processing topics such as rapid thermal processing, nonoptical lithography, molecular beam epitaxy, and metal organic chemical vapor deposition are also presented. The physics and chemistry of each process is introduced along with descriptions of the equipment used for the manufacturing of integrated circuits. The text also discusses the integration of these processes into common technologies such as CMOS, double poly bipolar, and GaAs MESFETs. Complexity/performance tradeoffs are evaluated along with a description of the current state-of-the-art devices. Each chapter includes sample problems with solutions. The book also makes use of the process simulation package SUPREM to demonstrate impurity profiles of practical interest.
Download or read book Interlayer Dielectrics for Semiconductor Technologies written by Shyam P Muraka and published by Elsevier. This book was released on 2003-10-13 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor technologies are moving at such a fast pace that new materials are needed in all types of application. Manipulating the materials and their properties at atomic dimensions has become a must. This book presents the case of interlayer dielectrics materials whilst considering these challenges. Interlayer Dielectrics for Semiconductor Technologies cover the science, properties and applications of dielectrics, their preparation, patterning, reliability and characterisation, followed by the discussion of different materials including those with high dielctric constants and those useful for waveguide applications in optical communications on the chip and the package.* Brings together for the FIRST time the science and technology of interlayer deilectrics materials, in one volume* written by renowned experts in the field* Provides an up-to-date starting point in this young research field.
Download or read book Microelectronic Circuits written by Adel S. Sedra and published by Oxford University Press, USA. This book was released on 2020-11-15 with total page 1264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectronic Circuits by Sedra and Smith has served generations of electrical and computer engineering students as the best and most widely-used text for this required course. Respected equally as a textbook and reference, "Sedra/Smith" combines a thorough presentation of fundamentals with an introduction to present-day IC technology. It remains the best text for helping students progress from circuit analysis to circuit design, developing design skills and insights that are essential to successful practice in the field. Significantly revised with the input of two new coauthors, slimmed down, and updated with the latest innovations, Microelectronic Circuits, Eighth Edition, remains the gold standard in providing the most comprehensive, flexible, accurate, and design-oriented treatment of electronic circuits available today.
Download or read book Electron Beam Technology in Microelectronic Fabrication written by George Brewer and published by Elsevier. This book was released on 2012-12-02 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron-Beam Technology in Microelectronic Fabrication presents a unified description of the technology of high resolution lithography. This book is organized into six chapters, each treating a major segment of the technology of high resolution lithography. The book examines topics such as the physics of interaction of the electrons with the polymer resist in which the patterns are drawn, the machines that generate and control the beam, and ways of applying electron-beam lithography in device fabrication and in the making of masks for photolithographic replication. Chapter 2 discusses fundamental processes by which patterns are created in resist masks. Chapter 3 describes electron-beam lithography machines, including some details of each of the major elements in the electron-optical column and their effect on the focused electron beam. Chapter 4 presents the use of electron-beam lithography to make discrete devices and integrated circuits. Chapter 5 looks at the techniques and economics of mask fabrication by the use of electron beams. Finally, Chapter 6 presents a comprehensive description and evaluation of the several high resolution replication processes currently under development. This book will be of great value to students and to engineers who want to learn the unique features of high resolution lithography so that they can apply it in research, development, or production of the next generation of microelectronic devices and circuits.
Download or read book Silicon Earth written by John D. Cressler and published by CRC Press. This book was released on 2017-11-22 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are in the center of the most life-changing technological revolution the Earth has ever known. In little more than 65 years, an eye-blink in human history, a single technological invention has launched the proverbial thousand ships, producing the most sweeping and pervasive set of changes ever to wash over humankind; changes that are reshaping the very core of human existence, on a global scale, at a relentlessly accelerating pace. And we are just at the very beginning. Silicon Earth: Introduction to Microelectronics and Nanotechnology introduces readers with little or no technical background to the marvels of microelectronics and nanotechnology, using straightforward language, an intuitive approach, minimal math, and lots of pictures. The general scientific and engineering underpinnings of microelectronics and nanotechnology are described, as well as how this new technological revolution is transforming a broad array of interdisciplinary fields, and civilization as a whole. Special "widget deconstruction" chapters address the inner workings of ubiquitous micro/nano-enabled pieces of technology, such as smartphones, flash drives, and digital cameras. Completely updated and upgraded to full color, the Second Edition: Includes new material on the design of electronic systems, the future of electronics, and the societal impact of micro/nanotechnology Provides new widget deconstructions of cutting-edge tech gadgets like the GPS-enabled smartwatch Adds end-of-chapter study questions and hundreds of new color photos Silicon Earth: Introduction to Microelectronics and Nanotechnology, Second Edition is a pick-up-and-read-cover-to-cover book for those curious about the micro/nanoworld, as well as a classroom-tested, student-and-professor-approved text ideal for an undergraduate-level university course. Lecture slides, homework examples, a deconstruction project, and discussion threads are available via an author-maintained website.
Download or read book Microelectronic Materials and Processes written by Roland Levy and published by Springer Science & Business Media. This book was released on 1989-01-31 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary thrust of very large scale integration (VLS!) is the miniaturization of devices to increase packing density, achieve higher speed, and consume lower power. The fabrication of integrated circuits containing in excess of four million components per chip with design rules in the submicron range has now been made possible by the introduction of innovative circuit designs and the development of new microelectronic materials and processes. This book addresses the latter challenge by assessing the current status of the science and technology associated with the production of VLSI silicon circuits. It represents the cumulative effort of experts from academia and industry who have come together to blend their expertise into a tutorial overview and cohesive update of this rapidly expanding field. A balance of fundamental and applied contributions cover the basics of microelectronics materials and process engineering. Subjects in materials science include silicon, silicides, resists, dielectrics, and interconnect metallization. Subjects in process engineering include crystal growth, epitaxy, oxidation, thin film deposition, fine-line lithography, dry etching, ion implantation, and diffusion. Other related topics such as process simulation, defects phenomena, and diagnostic techniques are also included. This book is the result of a NATO-sponsored Advanced Study Institute (AS!) held in Castelvecchio Pascoli, Italy. Invited speakers at this institute provided manuscripts which were edited, updated, and integrated with other contributions solicited from non-participants to this AS!.
Download or read book Introduction to Microfabrication written by Sami Franssila and published by John Wiley & Sons. This book was released on 2005-01-28 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfabrication is the key technology behind integrated circuits,microsensors, photonic crystals, ink jet printers, solar cells andflat panel displays. Microsystems can be complex, but the basicmicrostructures and processes of microfabrication are fairlysimple. Introduction to Microfabrication shows how the commonmicrofabrication concepts can be applied over and over again tocreate devices with a wide variety of structures andfunctions. Featuring: * A comprehensive presentation of basic fabrication processes * An emphasis on materials and microstructures, rather than devicephysics * In-depth discussion on process integration showing how processes,materials and devices interact * A wealth of examples of both conceptual and real devices Introduction to Microfabrication includes 250 homework problems forstudents to familiarise themselves with micro-scale materials,dimensions, measurements, costs and scaling trends. Both researchand manufacturing topics are covered, with an emphasis on silicon,which is the workhorse of microfabrication. This book will serve as an excellent first text for electricalengineers, chemists, physicists and materials scientists who wishto learn about microstructures and microfabrication techniques,whether in MEMS, microelectronics or emerging applications.
