Download or read book Introduction to Metallography written by Paul Goerens and published by . This book was released on 1908 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to the Study of Metallography and Macrography Classic Reprint written by Leon Guillet and published by Forgotten Books. This book was released on 2018-02-08 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from An Introduction to the Study of Metallography and Macrography Metallography may be defined as the microscopical study of polished and etched metallurgical specimens. The examination is carried out not by transmitted light as in the case of many histological and petrological specimens, but. By reflected light; one face of the metal specimen is perfectly polished, then etched by a suitable reagent having a differential effect on the various constituents, and finally examined under the microscope at varying magnifications up to, and in special instances exceeding, one thousand diameters. Macrography may be defined as the study of coarsely polished and etched metallurgical specimens without the aid of a microscope. It is especially useful in the detection of certain qualities or defects, and also enables a general estimation of the constitution of the material to be made. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Metallography written by Arthur Horseman Hiorns and published by . This book was released on 2015-08-05 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Metallography: An Introduction to the Study of the Structure of Metals The demand for practical instruction in all branches of a subject in our Technical Schools is increasing, and the introduction of experimental work is so moulding the character of the teaching, that the teacher must keep himself conversant with the new developments that are constantly arising in consequence of the progress of scientific knowledge. In accordance with these views the author has made a special study of the intimate structure of metals during the last few years, and found great pleasure in following the researches of those who may be rightly termed the pioneers in metallography, such as Sorby, Martens, Osmond, Stead, Roberts-Austen, Arnold, Andrews, and several others, whose patient and laborious efforts have brought to light such a precious fund of knowledge that many of the hitherto unsolved problems have now received a satisfactory explanation. As far as the author is aware of, no book on the subject has before been published in the English language; and as metallography is yet in its infancy, it is not sufficiently developed to permit of its being placed on a strictly logical scientific basis. This is therefore only an attempt to lay the principles of the subject before students and workers who are interested in the properties and applications of metals, and to offer a series of original illustrations which it is hoped will assist in making the meaning clearer. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Crystallization of Iron and Steel written by J. W. Mellor and published by Forgotten Books. This book was released on 2018-01-07 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Crystallization of Iron and Steel: An Introduction to the Study of Metallography About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book An Introduction to the Study of Metallurgy Classic Reprint written by W. C. Roberts-Austen and published by Forgotten Books. This book was released on 2017-10-20 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from An Introduction to the Study of Metallurgy The literature of metallurgy is rich, but those who are beginning to study it need guidance to a knowledge of the principles on which the art is rightly practised. It depends, as is well known, on the application of chemistry, physics, and mechanics; but the methods of metallurgists vary greatly from those of chemists, who, however, frequently fail to appreciate the nature of the difference. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Metallurgy written by Walter Rosenhain and published by Franklin Classics Trade Press. This book was released on 2018-10-25 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important and is part of the knowledge base of civilization as we know it. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. To ensure a quality reading experience, this work has been proofread and republished using a format that seamlessly blends the original graphical elements with text in an easy-to-read typeface. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Metallurgy written by Walter Rosenhain and published by . This book was released on 2015-07-03 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Metallurgy: An Introduction to the Study of Physical Metallurgy The present volume is intended to serve as an introduction to the subject of Physical Metallurgy for those who are interested in the physics and physical chemistry of metals, whether as scientific investigators, manufacturers or users of metals, or students of metallurgy, engineering and allied subjects in which a knowledge of metals plays an important part. The volume also serves as an introduction to the Metallurgical Series which is in course of publication by Messrs. Constable under the editorship of the author. In the various volumes of this series will be found that more detailed treatment of many of the principal subjects touched upon in this book which is required by those particularly interested in any one metal or alloy or in some special aspect of the subject. With these more detailed volumes in view, the treatment of the whole subject in the present work has been intentionally kept somewhat general, the object of the author being to awaken interest and to stimulate thought and ideas rather than to communicate a great mass of detailed data. In writing such a book the author has necessarily relied very largely upon the work of others, and in the tables of references at the end of each chapter he has endeavoured to make the only real acknowledgement which is possible in such circumstances. These references lay no claim to being an exhaustive bibliography of the subjects touched upon, but they constitute a fair guide to introductory reading. In regard to illustrations also, the author is indebted to many others for the examples he has chosen. As far as possible, the micrographs particularly have been taken from the author's own work or from that of members of the staff of the Metallurgy Department at the National Physical Laboratory. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Metallography Classic Reprint written by Cecil H. Desch and published by . This book was released on 2015-08-05 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Metallography The study of metallic alloys by physical and miscroscopical methods has reached so great a development in recent years as to form a distinct branch of physical chemistry. In the following pages I have sought to present an account of the methods employed in this branch of study, and of the conclusions which have been reached, and also to indicate the directions in which further research is needed. The attempt has been made to discriminate, in the literature of the subject, between investigations performed with the requisite care and thoroughness, and those which, from the use of impure materials in preparing the alloys, the examination of insufficiently large quantities, or other causes, fail to reach the standard of accuracy required in physico-chemical work. The abbreviations employed in the footnotes are, in most cases, those adopted by the Chemical Society, and the remainder will, it is hoped, be self-explanatory. References to Russian periodicals are only given if the investigation has not been published in full in another language. The whole of the photo-micrographs have been prepared in the Metallurgical Laboratory of the University of Glasgow. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Principles of Metallurgy written by Charles Herman Fulton and published by . This book was released on 2015-07-02 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Principles of Metallurgy: An Introduction to the Metallurgy of the Metals There is published in the United States no work which covers the subject of introductory or general metallurgy. The classic on this subject, "An Introduction to the Study of Metallurgy," by the distinguished late Sir William Roberts-Austen, has not been revised for a number of years. The author in his work in teaching metallurgy has frequently felt the lack of a suitable reference and text-book on the important subject of introductory metallurgy, and knows that this want is shared by others. This volume endeavors to supply this want. The subject is treated from the modern view-points, and metallurgists in general will probably find something of interest in the volume, particularly in the chapters on alloys, measurement of high temperatures, slags, and mattes. The sources of information are fully covered by references in foot-notes, by means of which the author acknowledges his indebtedness to the many workers in the scientific fields which have a bearing on the subject in hand. For material for the chapter on "Metals from the Historic Point of View" is derived in part from the works of Roesing and Neumann, to whom the author expresses his indebtedness. For material in the chapter on "Slag" the author has drawn largely on the invaluable work of J. H. L. Vogt, which has been so far unrecognized in this country. The following firms and individuals have kindly assisted by the loan of photographs and drawings: Mr. Edward S. Shephard of Denver; The Allis Chalmers Company of Milwaukee; The United-Otto By-product Coke Oven Company of New York; The Colorado Iron Works Company of Denver; The Crosby Manufacturing Company of Boston; and the Wellman, Seaver, Morgan Company of Cleveland. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Principles of Metallography Classic Reprint written by Robert S. Williams and published by Forgotten Books. This book was released on 2018-02-05 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Principles of Metallography This little book has been written to meet the needs of those students of General Science on Engineering who do not specialize in Metallography but who will use it to a limited extent in connection with their professional work. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Metallography written by Arthur Horseman Hiorns and published by . This book was released on 1902 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography written by Hiorns Arthur Horseman and published by . This book was released on 1901 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography written by Arthur H. Hiorns and published by Trieste Publishing. This book was released on 2017-09-10 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trieste Publishing has a massive catalogue of classic book titles. Our aim is to provide readers with the highest quality reproductions of fiction and non-fiction literature that has stood the test of time. The many thousands of books in our collection have been sourced from libraries and private collections around the world.The titles that Trieste Publishing has chosen to be part of the collection have been scanned to simulate the original. Our readers see the books the same way that their first readers did decades or a hundred or more years ago. Books from that period are often spoiled by imperfections that did not exist in the original. Imperfections could be in the form of blurred text, photographs, or missing pages. It is highly unlikely that this would occur with one of our books. Our extensive quality control ensures that the readers of Trieste Publishing's books will be delighted with their purchase. Our staff has thoroughly reviewed every page of all the books in the collection, repairing, or if necessary, rejecting titles that are not of the highest quality. This process ensures that the reader of one of Trieste Publishing's titles receives a volume that faithfully reproduces the original, and to the maximum degree possible, gives them the experience of owning the original work.We pride ourselves on not only creating a pathway to an extensive reservoir of books of the finest quality, but also providing value to every one of our readers. Generally, Trieste books are purchased singly - on demand, however they may also be purchased in bulk. Readers interested in bulk purchases are invited to contact us directly to enquire about our tailored bulk rates.
Download or read book The Metallography of Steel and Cast Iron Classic Reprint written by Henry Marion Howe and published by Forgotten Books. This book was released on 2018-03-23 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Metallography of Steel and Cast Iron Seventh, the Lower End of the Freezing Range 18 at Constant Temperature Irre spective of the Initial Percentage of the Salt. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book METALLOGRAPHY AN INTRO TO THE written by Arthur H. (Arthur Horseman) D. Hiorns and published by Wentworth Press. This book was released on 2016-08-27 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book The Metallography of Iron and Steel Classic Reprint written by Albert Sauveur and published by . This book was released on 2015-07-26 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Metallography of Iron and Steel While several excellent books on metallography have been published and while numerous papers on the metallography of iron and steel have appeared in the scientific and technical press, a well-balanced, specific, and comprehensive treatise on the subject has not heretofore been written. In the belief that there is a real and urgent need of such a treatise the author has endeavored to supply it, craving for his effort the indulgent criticism of his readers. He offers his book to those seeking self-instruction in the metallography of iron and steel, their special needs having been carefully considered in the arrangement of the lessons; he offers it to teachers and students trusting that they will find it valuable and suggestive as a text-book; he offers it to manufacturers and users of iron and steel in the belief that he has given due weight to the practical side of the subject and has avoided discussions of ill-founded or purely speculative theories; he offers it to the general reader interested in the scientific or practical features of the metallography of iron and steel, as the language used should be readily understood by those lacking specialized knowledge of the subject; he offers it to experts in the hope that they will find it not entirely devoid of original thought, original treatment, and suggestiveness. In the matter of illustrations and especially of photomicrographs the author's aim has been to utilize the best available, using his own or those taken in his laboratory only when no better ones have, to his knowledge, been published by others. The original source of every illustration has been indicated and the author desires to express his indebtedness to the following writers, the figures in parenthesis showing the number of illustrations from each: Andrews (3), Arnold (7), Bayley (1), Belaiew (5), Brearley (2), Carpenter and Keeling (l), Sherard Cowper-Coles (1), Desch (4), Edwards (2), Ewing and Rosenhain (2), Guillet (18), Goerens (9), Gulliver (2), Hall (1), Houghton (1), Kroll (1), Law (8), Levy (1), Longmuir (2), Matweieff (1), Maurer (1), Mellor (1), Osmond (17), Roberts-Austen (1), Robin (1), Roland-Gosselin (1), Rosenhain (2), Saladin (2), Sorby (1), Stead (13), Tschermak (3), Tschernoff (1), Wust (5), Ziegler (1). All illustrations not otherwise inscribed are the author's. The author cannot refrain from expressing here the sorrow and sense of personal loss he experienced when the news was received, while this book was passing through the press, of the death of Floris Osmond, for to the author, as no doubt to many others, Osmond's work and Osmond's life have been an inspiration. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Elements of Metallography Classic Reprint written by Rudolf Ruer and published by Forgotten Books. This book was released on 2017-10-13 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Elements of Metallography Our knowledge of the constitution of metallic alloys has advanced surprisingly within the last few years. This has been brought about for the most part by careful study of solidification and transformation processes and by application of the doctrine of heterogeneous equilibrium to such processes. Thus, a recital of the methods by means of which these results have been Obtained, must constantly rest on the basis of the above doctrine. However, the presentation which we have before us is not intended for the exclusive use of such readers as are thoroughly familiar with the principles of physical chemistry, but rather for anyone who is conversant with the fundamental facts Of experimental chemistry and physics. It does not, therefore, presume knowledge of the doctrine of equilibrium. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
