Download or read book Introduction To Mechanical Engineering Thermodynamics Mechanics And Strength Of Material written by Onkar Singh and published by New Age International. This book was released on 2006 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Is The Systematic Presentation Of The Concepts And Principles Essential For Understanding Engineering Thermodynamics, Engineering Mechanics And Strength Of Materials. Textbook Covers The Complete Syllabus Of Compulsory Subject Of Mechanical Engineering Of Uttar Pradesh Technical University, Lucknow In Particular And Other Universities Of The Country In General For Undergraduate Students Of Engineering And Technology. * Basic Concepts And Laws Of Thermodynamics Have Been Clearly Explained Using A Large Number Of Solved Problems * Entropy, Properties Of Pure Substances, Thermodynamic Cycles And Ic Engines Are Described In Detail. Steam Tables Andmollier Diagram Is Included * Principles Of Engineering Mechanics Have Been Discussed In Detail And Supported By Sufficient Number Of Solved And Unsolved Problems * Simple And Compound Stresses Are Discussed At Length * Bending Stresses In Beam And Torsion Have Been Covered In Detail * Large Number Of Solved And Unsolved Problems With Answers Are Given At The End Of Each Chapter * Si Units Are Used Throughout The Book
Download or read book Introduction to Mechanical Engineering written by Onkar Singh and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FUNDAMENTALS OF MECHANICAL ENGINEERING written by SAWHNEY, G. S. and published by PHI Learning Pvt. Ltd.. This book was released on 2015-06-30 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written with the first year engineering students of undergraduate level in mind, the well-designed textbook, now in its Third Edition, explains the fundamentals of mechanical engineering in the area of thermodynamics, mechanics, theory of machines, strength of materials and fluid dynamics. As these subjects form a basic part of an engineer’s education, this text is admirably suited to meet the needs of the common course in mechanical engineering prescribed in the curricula of almost all branches of engineering. This revised edition includes a new chapter on ‘Fluid Dynamics’ to meet the course requirement. Key Features • Presents an introduction to basic mechanical engineering topics required by all engineering students in their studies. • Includes a series of objective type question (True and False, Fill in the Blanks and Multiple Choice Questions) with explanatory answers to help students in preparing for competitive examinations. • Provides a large number of solved problems culled from the latest university and competitive examination papers which help in understanding theory.
Download or read book Introduction to Mechanical Engineering written by Michael Clifford and published by CRC Press. This book was released on 2022-12-27 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated throughout for the second edition, Introduction to Mechanical Engineering: Part 1 continues to be the essential text for all first-year undergraduate students, alongside those studying for foundation degrees and HNDs. Written by an experienced team of lecturers at the internationally renowned University of Nottingham, this book provides a comprehensive grounding in the following core engineering topics: thermodynamics, fluid mechanics, solid mechanics, dynamics, electrical and electronic systems and material science. It includes questions and answers for instructors and for self-guided learning. As well as mechanical engineers, this book is highly relevant to civil, automotive and aerospace engineering students.
Download or read book Basics of Mechanical Engineering written by R. K. Singal and published by I. K. International Pvt Ltd. This book was released on 2007-01-01 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basics of Mechanical Engineering systematically develops the concepts and principles essential for understanding engineering thermodynamics, mechanics and strength of materials. This book is meant for first year B. Tech students of various technical universities. It will also be helpful for candidates preparing for various competitive examinations.
Download or read book MECHANICAL SCIENCES written by AKSHOY RANJAN PAUL and published by PHI Learning Pvt. Ltd.. This book was released on 2005-01-01 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Primarily intended for the first-year undergraduate students of various engineering disciplines, this comprehensive and up-to-date text also serves the needs of second-year undergraduate students (Mechanical, Civil, Aeronautical, Chemical, Production and Marine Engineering) studying Engineering Thermodynamics and Fluid Mechanics. The whole text is divided into two parts and gives a detailed description of the theory along with the systematic applications of laws of Thermodynamics and Fluid Mechanics to engineering problems. Part I (Chapters 1-6) deals with the energy interaction between system and surroundings, while Part II (Chapters 7-15) covers the fluid flow phenomena. This accessible and comprehensive text is designed to take the student from an elementary level to a level of sophistication required for the analysis of practical problems.
Download or read book Engineering Mechanics and Strength of Materials written by and published by Laxmi Publications. This book was released on with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals Of Mechanical Engineering Thermodynamicstrue Theory Of Machines And Strength Of Materials 2Nd Ed written by G. S. Sawhney and published by PHI Learning Pvt. Ltd.. This book was released on 2009 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Mechanics Materials and Structures written by Alexander Blake and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: The professional's source . Handbooks in the Wiley Series in Mechanical Engineering Practice Handbook of Energy Systems Engineering Production and Utilization Edited by Leslie C. Wilbur Here is the essential information needed to select, compare, and evaluate energy components and systems. Handbook of Energy Systems is a rich sourcebook of reference data and formulas, performance criteria, codes and standards, and techniques used in the development and production of energy. It focuses on the major sources of energy technology: coal, hydroelectric and nuclear power, petroleum, gas, and solar energy Each section of the Handbook is a mini-primer furnishing modern methods of energy storage, conservation, and utilization, techniques for analyzing a wide range of components such as heat exchangers, pumps, fans and compressors, principles of thermodynamics, heat transfer and fluid dynamics, current energy resource data and much more. 1985 (0 471-86633-4) 1,300 pp.
Download or read book Engineering Mechanics and Strength of Materials written by Roger Kinsky and published by . This book was released on 1986 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This renowned, comprehensive text is an introduction to applied engineering mechanics and strength of materials. The theory is supported by a wealth of detailed illustrations and diagrams to give students a complete understanding. This text includes many worked problems, end-of-chapter problems and exercises, and illustrations for both text and problems.
Download or read book An Introduction to Mechanical Engineering written by Michael Clifford and published by CRC Press. This book was released on 2009-04-24 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Mechanical Engineering is an essential text for all first-year undergraduate students as well as those studying for foundation degrees and HNDs. The text gives a thorough grounding in the following core engineering topics: thermodynamics, fluid mechanics, solid mechanics, dynamics, electricals and electronics, and materials science. As well as mechanical engineers, the text will be highly relevant to civil, automotive, aeronautical/aerospace and general engineering students. The text is written by an experienced team of first-year lecturers at the internationally renowned University of Nottingham. The material in this book has full student and lecturer support on an accompanying website at http://cw.tandf.co.uk/mechanicalengineering/, which includes: worked examples of exam-style questions multiple-choice self-assessment revision guides.
Download or read book Intermediate Mechanics of Materials written by J. R. Barber and published by Springer Science & Business Media. This book was released on 2010-11-02 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the essential topics for a second-level course in strength of materials or mechanics of materials, with an emphasis on techniques that are useful for mechanical design. Design typically involves an initial conceptual stage during which many options are considered. At this stage, quick approximate analytical methods are crucial in determining which of the initial proposals are feasible. The ideal would be to get within 30% with a few lines of calculation. The designer also needs to develop experience as to the kinds of features in the geometry or the loading that are most likely to lead to critical conditions. With this in mind, the author tries wherever possible to give a physical and even an intuitive interpretation to the problems under investigation. For example, students are encouraged to estimate the location of weak and strong bending axes and the resulting neutral axis of bending before performing calculations, and the author discusses ways of getting good accuracy with a simple one degree of freedom Rayleigh-Ritz approximation. Students are also encouraged to develop a feeling for structural deformation by performing simple experiments in their outside environment, such as estimating the radius to which an initially straight bar can be bent without producing permanent deformation, or convincing themselves of the dramatic difference between torsional and bending stiffness for a thin-walled open beam section by trying to bend and then twist a structural steel beam by hand-applied loads at one end. In choosing dimensions for mechanical components, designers will expect to be guided by criteria of minimum weight, which with elementary calculations, generally leads to a thin-walled structure as an optimal solution. This consideration motivates the emphasis on thin-walled structures, but also demands that students be introduced to the limits imposed by structural instability. Emphasis is also placed on the effect of manufacturing errors on such highly-designed structures - for example, the effect of load misalignment on a beam with a large ratio between principal stiffness and the large magnification of initial alignment or loading errors in a strut below, but not too far below the buckling load. Additional material can be found on http://extras.springer.com/ .
Download or read book Engineering Mechanics written by Val Ivanoff and published by . This book was released on 1995 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Engineers Handbook Volume 1 written by Myer Kutz and published by John Wiley & Sons. This book was released on 2015-02-05 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt: Full coverage of materials and mechanical design in engineering Mechanical Engineers' Handbook, Fourth Edition provides a quick guide to specialized areas you may encounter in your work, giving you access to the basics of each and pointing you toward trusted resources for further reading, if needed. The accessible information inside offers discussions, examples, and analyses of the topics covered. This first volume covers materials and mechanical design, giving you accessible and in-depth access to the most common topics you'll encounter in the discipline: carbon and alloy steels, stainless steels, aluminum alloys, copper and copper alloys, titanium alloys for design, nickel and its alloys, magnesium and its alloys, superalloys for design, composite materials, smart materials, electronic materials, viscosity measurement, and much more. Presents comprehensive coverage of materials and mechanical design Offers the option of being purchased as a four-book set or as single books, depending on your needs Comes in a subscription format through the Wiley Online Library and in electronic and custom formats Engineers at all levels of industry, government, or private consulting practice will find Mechanical Engineers' Handbook, Volume 1 a great resource they'll turn to repeatedly as a reference on the basics of materials and mechanical design.
Download or read book Applied Strength of Materials written by Robert L. Mott and published by Prentice Hall. This book was released on 2008 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate, introductory level courses in Statics and Strength of Materials, in departments of Mechanical Engineering Technology, Civil Engineering Technology, Construction Engineering Technology or Manufacturing Engineering Technology This text features a strong presentation of the fundamentals of strength of materials (or mechanics of materials) integrated with an emphasis on applications to many fields of engineering and engineering technology. The approach to mathematics use in the book satisfies both those programs where calculus use is expected and those for which college algebra and trigonometry are the prerequisite skills needed by the students.
Download or read book An Introduction to Mechanical Engineering Part 2 written by Michael Clifford and published by CRC Press. This book was released on 2010-08-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Mechanical Engineering: Part 2 is an essential text for all second-year undergraduate students as well as those studying foundation degrees and HNDs. The text provides thorough coverage of the following core engineering topics: Fluid dynamics Thermodynamics Solid mechanics Control theory and techniques Mechanical power, loads and transmissions Structural vibration As well as mechanical engineers, the text will be highly relevant to automotive, aeronautical/aerospace and general engineering students. The material in this book has full student and lecturer support on an accompanying website at http://cw.tandf.co.uk/mechanicalengineering/, which includes: worked solutions for exam-style questions multiple-choice self-assessment revision material The text is written by an experienced team of lecturers at the internationally renowned University of Nottingham.
Download or read book Modern Engineering Thermodynamics Textbook with Tables Booklet written by Robert T. Balmer and published by Academic Press. This book was released on 2011-01-03 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Engineering Thermodynamics - Textbook with Tables Booklet offers a problem-solving approach to basic and applied engineering thermodynamics, with historical vignettes, critical thinking boxes and case studies throughout to help relate abstract concepts to actual engineering applications. It also contains applications to modern engineering issues. This textbook is designed for use in a standard two-semester engineering thermodynamics course sequence, with the goal of helping students develop engineering problem solving skills through the use of structured problem-solving techniques. The first half of the text contains material suitable for a basic Thermodynamics course taken by engineers from all majors. The second half of the text is suitable for an Applied Thermodynamics course in mechanical engineering programs. The Second Law of Thermodynamics is introduced through a basic entropy concept, providing students a more intuitive understanding of this key course topic. Property Values are discussed before the First Law of Thermodynamics to ensure students have a firm understanding of property data before using them. Over 200 worked examples and more than 1,300 end of chapter problems provide an extensive opportunity to practice solving problems. For greater instructor flexibility at exam time, thermodynamic tables are provided in a separate accompanying booklet. University students in mechanical, chemical, and general engineering taking a thermodynamics course will find this book extremely helpful. Provides the reader with clear presentations of the fundamental principles of basic and applied engineering thermodynamics. Helps students develop engineering problem solving skills through the use of structured problem-solving techniques. Introduces the Second Law of Thermodynamics through a basic entropy concept, providing students a more intuitive understanding of this key course topic. Covers Property Values before the First Law of Thermodynamics to ensure students have a firm understanding of property data before using them. Over 200 worked examples and more than 1,300 end of chapter problems offer students extensive opportunity to practice solving problems. Historical Vignettes, Critical Thinking boxes and Case Studies throughout the book help relate abstract concepts to actual engineering applications. For greater instructor flexibility at exam time, thermodynamic tables are provided in a separate accompanying booklet.
