Download or read book Introduction to Gas Turbine Theory written by Klaus Brun and published by . This book was released on 2019-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was developed directly from a series of Solar Turbines Incorporated internal short courses that were presented to an audience with a wide range of technical backgrounds, not necessarily related to turbomachinery. Thus, functional principles and physical understanding are emphasized, rather than the derivation of complicated mathematical equations. While the focus of this book is gas turbine theory, it is not intended to provide an in-depth knowledge of gas turbine aerodynamics or thermodynamics, nor is it intended to make the reader an expert in the field of turbomachinery. Readers will benefit from the many topics and theories that pertain to the subject matter.The text emphasizes simplified explanations of complex physical theories. Hopefully, readers will utilize this book to develop an appreciation of the many engineering disciplines that are involved in the design and analysis of gas turbines. Readers are also encouraged to further investigate a wide range of topics by studying more specific, subject-matter literature.
Download or read book Introduction to Gas Turbine Theory written by Klaus Brun and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbine Theory written by G.F.C. Rogers and published by Pearson Higher Ed. This book was released on 2017-06-07 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: When the First Edition of this book was written in 1951, the gas turbine was just becoming established as a powerplant for military aircraft. It took another decade before the gas turbine was introduced to civil aircraft, and this market developed so rapidly that the passenger liner was rendered obsolete. Other markets like naval propulsion, pipeline compression and electrical power applications grew steadily. In recent years the gas turbine, in combination with the steam turbine, has played an ever-increasing role in power generation. Despite the rapid advances in both output and efficiency, the basic theory of the gas turbine has remained unchanged. The layout of this new edition is broadly similar to the original, but greatly expanded and updated, comprising an outline of the basic theory, aerodynamic design of individual components, and the prediction of off-design performance. The addition of a chapter devoted to the mechanical design of gas turbines greatly enhances the scope of the book. Descriptions of engine developments and current markets make this book useful to both students and practising engineers.
Download or read book Gas Turbine Theory written by H. I. H. Saravanamuttoo and published by Pearson Education. This book was released on 2001 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas Turbine Theory, 5th edition HIH Saravanamuttoo, GFC Rogers, H Cohen When the First Edition of this book was written fifty years ago, the gas turbine was just becoming established as a powerplant for military aircraft. It took another decade before the gas turbine was introduced to civil aircraft, and this market developed so rapidly that the ocean liner was rendered obsolete. Other markets like naval propulsion, pipeline compression and electrical power applications grew steadily. In recent years the gas turbine, in combination with the steam turbine, has played an ever-increasing role in power generation. Despite the rapid advances in both output and efficiency, the basic theory of the gas turbine has remained unchanged. The layout of this new edition is broadly similar to the original, but greatly expanded and updated, comprising an outline of the basic theory, aerodynamic design of individual components, and the prediction of off-design performance. Descriptions of engine developments and current markets make this book useful to both students and practising engineers. FEATURES: - completely updated to cover current industry requirements and applications - coverage of both aircraft and industrial gas turbines - includes detailed treatment of off-design performance - incorporates in-depth examples throughout - based on the authors' extensive teaching and professional experience Gas Turbine Theory is the classic course text on gas turbines, suitable for both undergraduate and graduate students of mechanical and aeronautical engineering. This new edition will also continue to be a valuable reference for practising gas turbine engineers. THE AUTHORS H.I.H. Saravanamuttoo, Professor Emeritus, Dept of Mechanical and Aerospace Engineering, Carleton University, Ottawa, Canada, has many years experience in the gas turbine industry on both sides of the Atlantic, and is a Past President of the Canadian Aeronautics and Space Institute. G.F.C. Rogers was, until retirement, Professor of Engineering Thermodynamics at the University of Bristol. He is author, with Y.R. Mayhew, of Engineering Thermodynamics Work and Heat Transfer, 4th edition. The late H. Cohen, was formerly University Lecturer and Director of Studies in Engineering at Queen's College, Cambridge.
Download or read book Principles of Turbomachinery in Air Breathing Engines written by Erian A. Baskharone and published by Cambridge University Press. This book was released on 2006-07-31 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for advanced undergraduate and graduate students in mechanical and aerospace engineering taking a course commonly called Principles of Turbomachinery or Aerospace Propulsion. The book begins with a review of basic thermodynamics and fluid mechanics principles to motive their application to aerothermodynamics and real-life design issues. This approach is ideal for the reader who will face practical situations and design decisions in the gas turbine industry. The text is fully supported by over 200 figures, numerous examples, and homework problems.
Download or read book Gas Turbine Theory written by H. I. H. Saravanamuttoo and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas Turbine Theory is the classic course text on gas turbines, suitable for both undergraduate and graduate students of mechanical and aeronautical engineering. This new seventh edition will also continue to be a valuable reference for practising gas turbine engineers.
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
Download or read book The Gas Turbine written by Hans Holzwarth and published by . This book was released on 1912 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbine Theory written by H.I.H. Saravanamuttoo and published by Pearson Higher Ed. This book was released on 2010-02-02 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the gas turbine, in combination with the steam turbine, has played an ever-increasing role in power generation. Despite the rapid advances in both output and efficiency, the basic theory of the gas turbine has remained unchanged. The layout of this new edition is broadly similar to the original, but greatly expanded and updated, comprising an outline of the basic theory, aerodynamic design of individual components, and the prediction of off-design performance. The addition of a chapter devoted to the mechanical design of gas turbines greatly enhances the scope of the book.
Download or read book Gas Turbine Design Components and System Design Integration written by Meinhard T. Schobeiri and published by Springer. This book was released on 2017-06-06 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book written by a world-renowned expert with more than forty years of active gas turbine R&D experience comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently available gas turbine handbooks that provide the reader with an overview without in-depth treatment of the subject, the current book is concentrated on a detailed aero-thermodynamics, design and off-deign performance aspects of individual components as well as the system integration and its dynamic operation.This new book provides practicing gas turbine designers and young engineers working in the industry with design material that the manufacturers would keep proprietary. The book is also intended to provide instructors of turbomachinery courses around the world with a powerful tool to assign gas turbine components as project and individual modules that are integrated into a complete system. Quoting many statements by the gas turbine industry professionals, the young engineers graduated from the turbomachinery courses offered by the author, had the competency of engineers equivalent to three to four years of industrial experience.
Download or read book Gas Turbines written by Claire Soares and published by Elsevier. This book was released on 2014-10-23 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering basic theory, components, installation, maintenance, manufacturing, regulation and industry developments, Gas Turbines: A Handbook of Air, Sea and Land Applications is a broad-based introductory reference designed to give you the knowledge needed to succeed in the gas turbine industry, land, sea and air applications.Providing the big picture view that other detailed, data-focused resources lack, this book has a strong focus on the information needed to effectively decision-make and plan gas turbine system use for particular applications, taking into consideration not only operational requirements but long-term life-cycle costs in upkeep, repair and future use.With concise, easily digestible overviews of all important theoretical bases and a practical focus throughout, Gas Turbines is an ideal handbook for those new to the field or in the early stages of their career, as well as more experienced engineers looking for a reliable, one-stop reference that covers the breadth of the field. Covers installation, maintenance, manufacturer's specifications, performance criteria and future trends, offering a rounded view of the area that takes in technical detail as well as well as industry economics and outlook Updated with the latest industry developments, including new emission and efficiency regulations and their impact on gas turbine technology Over 300 pages of new/revised content, including new sections on microturbines, non-conventional fuel sources for microturbines, emissions, major developments in aircraft engines, use of coal gas and superheated steam, and new case histories throughout highlighting component improvements in all systems and sub-systems
Download or read book Introduction to Marine Gas Turbines written by Naval Education and Training Program Development Center and published by . This book was released on 1978 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbines for Electric Power Generation written by S. Can Gülen and published by Cambridge University Press. This book was released on 2019-02-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything you wanted to know about industrial gas turbines for electric power generation in one source with hard-to-find, hands-on technical information.
Download or read book Gas Turbine Theory written by Henry Cohen and published by . This book was released on 1965 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Gas Turbines written by William W. Bathie and published by John Wiley & Sons. This book was released on 1996 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the fundamentals of the gas turbine engine, including cycles, components, component matching, and environmental considerations.
Download or read book Commercial Aircraft Propulsion and Energy Systems Research written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-09 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.
Download or read book Gas Turbine Theory written by Henry COHEN (Fellow and Lecturer in Engineering, Queens' College, University of Cambridge, and ROGERS (Gordon Frederick Crichton)) and published by . This book was released on 1951 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
