Download or read book Introduction to Feedback Control Using Design Studies written by Timothy McLain and published by . This book was released on 2019-07-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a unique introduction to Feedback Control. It differs from typical control books by presenting principles in the context of three specific design examples: a one link robot arm, a pendulum on a cart, and a satellite attitude problem. These three design examples illustrate the full process of implementing control strategies on mechanical systems. The book begins by introducing the Euler Lagrange method for modeling mechanical systems and discusses computer simulation of these models. Linear design models are developed, specifically transfer function and state space models, that capture the behavior of the system around equilibria. The book then presents three different design strategies for output feedback control: PID control, observer based design, and loopshaping design methods based on the frequency response of the system. Extensive examples show how the controllers are implemented in Simulink, Matlab object oriented code, and Python.
Download or read book Feedback Control Theory written by John C. Doyle and published by Courier Corporation. This book was released on 2013-04-09 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent introduction to feedback control system design, this book offers a theoretical approach that captures the essential issues and can be applied to a wide range of practical problems. Its explorations of recent developments in the field emphasize the relationship of new procedures to classical control theory, with a focus on single input and output systems that keeps concepts accessible to students with limited backgrounds. The text is geared toward a single-semester senior course or a graduate-level class for students of electrical engineering. The opening chapters constitute a basic treatment of feedback design. Topics include a detailed formulation of the control design program, the fundamental issue of performance/stability robustness tradeoff, and the graphical design technique of loopshaping. Subsequent chapters extend the discussion of the loopshaping technique and connect it with notions of optimality. Concluding chapters examine controller design via optimization, offering a mathematical approach that is useful for multivariable systems.
Download or read book Control System Design written by Bernard Friedland and published by Courier Corporation. This book was released on 2012-03-08 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to state-space methods covers feedback control; state-space representation of dynamic systems and dynamics of linear systems; frequency-domain analysis; controllability and observability; shaping the dynamic response; more. 1986 edition.
Download or read book Linear Feedback Control written by Dingyu Xue and published by SIAM. This book was released on 2007-01-01 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses analysis and design techniques for linear feedback control systems using MATLAB® software. By reducing the mathematics, increasing MATLAB working examples, and inserting short scripts and plots within the text, the authors have created a resource suitable for almost any type of user. The book begins with a summary of the properties of linear systems and addresses modeling and model reduction issues. In the subsequent chapters on analysis, the authors introduce time domain, complex plane, and frequency domain techniques. Their coverage of design includes discussions on model-based controller designs, PID controllers, and robust control designs. A unique aspect of the book is its inclusion of a chapter on fractional-order controllers, which are useful in control engineering practice.
Download or read book Introduction to Feedback Control written by Li Qiu and published by Prentice Hall. This book was released on 2010 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate courses in control theory at the junior or senior level. Introduction to Feedback Control, First Edition updates classical control theory by integrating modern optimal and robust control theory using both classical and modern computational tools. This text is ideal for anyone looking for an up-to-date book on Feedback Control. Although there are many textbooks on this subject, authors Li Qiu and Kemin Zhou provide a contemporary view of control theory that includes the development of modern optimal and robust control theory over the past 30 years. A significant portion of well-known classical control theory is maintained, but with consideration of recent developments and available modern computational tools.
Download or read book Multivariable Feedback Control written by Sigurd Skogestad and published by John Wiley & Sons. This book was released on 2005-11-04 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multivariable Feedback Control: Analysis and Design, Second Edition presents a rigorous, yet easily readable, introduction to the analysis and design of robust multivariable control systems. Focusing on practical feedback control and not on system theory in general, this book provides the reader with insights into the opportunities and limitations of feedback control. Taking into account the latest developments in the field, this fully revised and updated second edition: * features a new chapter devoted to the use of linear matrix inequalities (LMIs); * presents current results on fundamental performance limitations introduced by RHP-poles and RHP-zeros; * introduces updated material on the selection of controlled variables and self-optimizing control; * provides simple IMC tuning rules for PID control; * covers additional material including unstable plants, the feedback amplifier, the lower gain margin and a clear strategy for incorporating integral action into LQG control; * includes numerous worked examples, exercises and case studies, which make frequent use of Matlab and the new Robust Control toolbox. Multivariable Feedback Control: Analysis and Design, Second Edition is an excellent resource for advanced undergraduate and graduate courses studying multivariable control. It is also an invaluable tool for engineers who want to understand multivariable control, its limitations, and how it can be applied in practice. The analysis techniques and the material on control structure design should prove very useful in the new emerging area of systems biology. Reviews of the first edition: "Being rich in insights and practical tips on controller design, the book should also prove to be very beneficial to industrial control engineers, both as a reference book and as an educational tool." Applied Mechanics Reviews "In summary, this book can be strongly recommended not only as a basic text in multivariable control techniques for graduate and undergraduate students, but also as a valuable source of information for control engineers." International Journal of Adaptive Control and Signal Processing
Download or read book Feedback Systems written by Karl Johan Åström and published by Princeton University Press. This book was released on 2021-02-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to the principles and applications of feedback systems—now fully revised and expanded This textbook covers the mathematics needed to model, analyze, and design feedback systems. Now more user-friendly than ever, this revised and expanded edition of Feedback Systems is a one-volume resource for students and researchers in mathematics and engineering. It has applications across a range of disciplines that utilize feedback in physical, biological, information, and economic systems. Karl Åström and Richard Murray use techniques from physics, computer science, and operations research to introduce control-oriented modeling. They begin with state space tools for analysis and design, including stability of solutions, Lyapunov functions, reachability, state feedback observability, and estimators. The matrix exponential plays a central role in the analysis of linear control systems, allowing a concise development of many of the key concepts for this class of models. Åström and Murray then develop and explain tools in the frequency domain, including transfer functions, Nyquist analysis, PID control, frequency domain design, and robustness. Features a new chapter on design principles and tools, illustrating the types of problems that can be solved using feedback Includes a new chapter on fundamental limits and new material on the Routh-Hurwitz criterion and root locus plots Provides exercises at the end of every chapter Comes with an electronic solutions manual An ideal textbook for undergraduate and graduate students Indispensable for researchers seeking a self-contained resource on control theory
Download or read book Introduction to Feedback Control written by Kirsten A. Morris and published by Academic Press. This book was released on 2001 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This survey of input/output controller design is aimed at a mathematical audience. The text provides a rigorous introduction to input/output controller design for linear systems.
Download or read book Feedback Control Systems written by Alex Abramovici and published by Springer Science & Business Media. This book was released on 2000-09-30 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Feedback Control Systems: A Fast Track Guide for Scientists and Engineers is an essential reference tool for: Electrical, mechanical and aerospace engineers who are developing or improving products, with a need to use feedback control systems. Faculty and graduate students in the fields of engineering and experimental science (e.g., physics) who are building their own high-performance measuring/test arrangements. Faculties teaching laboratory courses in engineering and measurement techniques, and the students taking those courses. Practising engineers, scientists, and students who need a quick intuitive education in the issues related to feedback control systems. Key features of Feedback Control Systems: The contents and the layout of the book are structured to ensure satisfactory proficiency for the novice designer. The authors provide the reader with a simple yet powerful method for designing control systems using several sensors or actuators. It offers a comprehensive control system troubleshooting and performance testing guide. From the reviewers: Control systems are ubiquitous and their use would be even more widespread if more people were competent in designing them. This book will play a valuable role in expanding the cadre of competent designers. This is a book that needed to be written, and its presentation is different from any other book on controls intended for a wide community of engineers and scientists. The book breaks the common cliché of style in the control literature that tends toward mathematical formality. Instead, the emphasis is on intuition and practical advice. The book contains a very valuable and novel heuristic treatment of the subject. .. one of the best examples of a book that describes the design cycle. The book will help satisfy the demand among practising engineers for a good introduction to control systems.
Download or read book Introduction to Control System Design First Edition written by Harry Kwatny and published by Cognella Academic Publishing. This book was released on 2020-05-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Control System Design equips students with the basic concepts, tools, and knowledge they need to effectively design automatic control systems. The text not only teaches readers how to design a control system, it inspires them to innovate and expand current methods to address new automation technology challenges and opportunities. The text is designed to support a two-quarter/semester course and is organized into two main parts. Part I covers basic linear system analysis and model-assembly concepts. It presents readers with a short history of control system design and introduces basic control concepts using first-order and second order-systems. Additional chapters address the modeling of mechanical and electrical systems, as well as assembling complex models using subsystem interconnection tools. Part II focuses on linear control system design. Students learn the fundamentals of feedback control systems; stability, regulation, and root locus design; time delay, plant uncertainty, and robust stability; and state feedback and linear quadratic optimization. The final chapter covers observer theory and output feedback control and reformulates the linear quadratic optimization problem as the more general H2 problem.
Download or read book Feedback Control of Computing Systems written by Joseph L. Hellerstein and published by John Wiley & Sons. This book was released on 2004-09-21 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first practical treatment of the design and application of feedback control of computing systems. MATLAB files for the solution of problems and case studies accompany the text throughout. The book discusses information technology examples, such as maximizing the efficiency of Lotus Notes. This book results from the authors' research into the use of control theory to model and control computing systems. This has important implications to the way engineers and researchers approach different resource management problems. This guide is well suited for professionals and researchers in information technology and computer science.
Download or read book An Introduction to System Modeling and Control written by John Chiasson and published by John Wiley & Sons. This book was released on 2022-01-21 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and straightforward exploration of the basic tools for the modeling, analysis, and design of control systems In An Introduction to System Modeling and Control, Dr. Chiasson delivers an accessible and intuitive guide to understanding modeling and control for students in electrical, mechanical, and aerospace/aeronautical engineering. The book begins with an introduction to the need for control by describing how an aircraft flies complete with figures illustrating roll, pitch, and yaw control using its ailerons, elevators, and rudder, respectively. The book moves on to rigid body dynamics about a single axis (gears, cart rolling down an incline) and then to modeling DC motors, DC tachometers, and optical encoders. Using the transfer function representation of these dynamic models, PID controllers are introduced as an effective way to track step inputs and reject constant disturbances. It is further shown how any transfer function model can be stabilized using output pole placement and on how two-degree of freedom controllers can be used to eliminate overshoot in step responses. Bode and Nyquist theory are then presented with an emphasis on how they give a quantitative insight into a control system's robustness and sensitivity. An Introduction to System Modeling and Control closes with chapters on modeling an inverted pendulum and a magnetic levitation system, trajectory tracking control using state feedback, and state estimation. In addition the book offers: A complete set of MATLAB/SIMULINK files for examples and problems included in the book. A set of lecture slides for each chapter. A solutions manual with recommended problems to assign. An analysis of the robustness and sensitivity of four different controller designs for an inverted pendulum (cart-pole). Perfect for electrical, mechanical, and aerospace/aeronautical engineering students, An Introduction to System Modeling and Control will also be an invaluable addition to the libraries of practicing engineers.
Download or read book Feedback Control Systems written by Alex Abramovici and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Feedback Control Systems: A Fast Track Guide for Scientists and Engineers is an essential reference tool for: Electrical, mechanical and aerospace engineers who are developing or improving products, with a need to use feedback control systems. Faculty and graduate students in the fields of engineering and experimental science (e.g., physics) who are building their own high-performance measuring/test arrangements. Faculties teaching laboratory courses in engineering and measurement techniques, and the students taking those courses. Practising engineers, scientists, and students who need a quick intuitive education in the issues related to feedback control systems. Key features of Feedback Control Systems: The contents and the layout of the book are structured to ensure satisfactory proficiency for the novice designer. The authors provide the reader with a simple yet powerful method for designing control systems using several sensors or actuators. It offers a comprehensive control system troubleshooting and performance testing guide. From the reviewers: Control systems are ubiquitous and their use would be even more widespread if more people were competent in designing them. This book will play a valuable role in expanding the cadre of competent designers. This is a book that needed to be written, and its presentation is different from any other book on controls intended for a wide community of engineers and scientists. The book breaks the common cliché of style in the control literature that tends toward mathematical formality. Instead, the emphasis is on intuition and practical advice. The book contains a very valuable and novel heuristic treatment of the subject. .. one of the best examples of a book that describes the design cycle. The book will help satisfy the demand among practising engineers for a good introduction to control systems.
Download or read book Feedback Control of Dynamic Systems Int written by J. David Powell and published by Pearson Academic Computing. This book was released on 2012-06 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers the material that every engineer, and most scientists and prospective managers, needs to know about feedback control, including concepts like stability, tracking, and robustness. Each chapter presents the fundamentals along with comprehensive, worked-out examples, all within a real-world context.
Download or read book Control System Design written by Graham Clifford Goodwin and published by Pearson. This book was released on 2001 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: For both undergraduate and graduate courses in Control System Design. Using a "how to do it" approach with a strong emphasis on real-world design, this text provides comprehensive, single-source coverage of the full spectrum of control system design. Each of the text's 8 parts covers an area in control--ranging from signals and systems (Bode Diagrams, Root Locus, etc.), to SISO control (including PID and Fundamental Design Trade-Offs) and MIMO systems (including Constraints, MPC, Decoupling, etc.).
Download or read book Introduction to Feedback Control Systems written by Pericles Emanuel and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1979 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Linear Feedback Controls written by Mark A. Haidekker and published by Elsevier. This book was released on 2020-05-26 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control systems are one of the most important engineering fields, and recent advances in microelectonics and microelectromechanical systems have made feedback controls ubiquitous - a simple cell phone, for example, can have dozens of feedback control systems. Recent research focuses on advanced controls, such as nonlinear systems, adaptive controls, or controls based on computer learning and artificial intelligence. Conversely, classical (linear) control theory is well established; yet, it provides the crucial foundation not only for advanced control topics, but also for the many everyday control systems ranging from cell phone backlight control to self-balancing hoverboard scooters. Linear Feedback Controls provides a comprehensive, yet compact introduction to classical control theory. The present Second Edition has been expanded to include important topics, such as state-space models and control robustness. Moreover, aspects of the practical realization have been significantly expanded with complete design examples and with typical building blocks for control systems. The book is ideal for upper level students in electrical and mechanical engineering, for whom a course in Feedback Controls is usually required. Moreover, students in bioengineering, chemical engineering, and agricultural and environmental engineering can benefit from the introductory character and the practical examples, and the book provides an introduction or helpful refresher for graduate students and professionals. Focuses on the essentials of control fundamentals, system analysis, mathematical description and modeling, and control design to guide the reader Illustrates how control theory is linked to design of control systems and their performance by introducing theoretical elements as tools in a designer's toolbox Guides the reader through the different analysis and design tools with strands of examples that weave throughout the book Highlights both the design process and typical applications by presenting detailed practical examples and their realization and performance, complete with circuit diagrams and measured performance data