Download or read book Control System Design written by Bernard Friedland and published by Courier Corporation. This book was released on 2012-03-08 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to state-space methods covers feedback control; state-space representation of dynamic systems and dynamics of linear systems; frequency-domain analysis; controllability and observability; shaping the dynamic response; more. 1986 edition.
Download or read book Introduction to Control Systems written by D K Anand and published by Elsevier. This book was released on 2013-10-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written for use as a text in an introductory course in control systems. The classical as well as the state space approach is included and integrated as much as possible. The first part of the book deals with analysis in the time domain. All the graphical techniques are presented in one chapter and the latter part of the book deals with some advanced material. It is intended that the student should already be familiar with Laplace transformations and have had an introductory course in circuit analysis or vibration theory. To provide the student with an understanding of correlation concepts in control theory, a new chapter dealing with stochastic inputs has been added. Also Appendix\A has been significantly expanded to cover the theory of Laplace transforms and z-transforms. The book includes worked examples and problems for solution and an extensive bibliography as a guide for further reading.
Download or read book Introduction to Control System Design First Edition written by Harry Kwatny and published by Cognella Academic Publishing. This book was released on 2020-05-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Control System Design equips students with the basic concepts, tools, and knowledge they need to effectively design automatic control systems. The text not only teaches readers how to design a control system, it inspires them to innovate and expand current methods to address new automation technology challenges and opportunities. The text is designed to support a two-quarter/semester course and is organized into two main parts. Part I covers basic linear system analysis and model-assembly concepts. It presents readers with a short history of control system design and introduces basic control concepts using first-order and second order-systems. Additional chapters address the modeling of mechanical and electrical systems, as well as assembling complex models using subsystem interconnection tools. Part II focuses on linear control system design. Students learn the fundamentals of feedback control systems; stability, regulation, and root locus design; time delay, plant uncertainty, and robust stability; and state feedback and linear quadratic optimization. The final chapter covers observer theory and output feedback control and reformulates the linear quadratic optimization problem as the more general H2 problem.
Download or read book Introduction to Linear Control Systems written by Yazdan Bavafa-Toosi and published by Academic Press. This book was released on 2017-09-19 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Linear Control Systems is designed as a standard introduction to linear control systems for all those who one way or another deal with control systems. It can be used as a comprehensive up-to-date textbook for a one-semester 3-credit undergraduate course on linear control systems as the first course on this topic at university. This includes the faculties of electrical engineering, mechanical engineering, aerospace engineering, chemical and petroleum engineering, industrial engineering, civil engineering, bio-engineering, economics, mathematics, physics, management and social sciences, etc. The book covers foundations of linear control systems, their raison detre, different types, modelling, representations, computations, stability concepts, tools for time-domain and frequency-domain analysis and synthesis, and fundamental limitations, with an emphasis on frequency-domain methods. Every chapter includes a part on further readings where more advanced topics and pertinent references are introduced for further studies. The presentation is theoretically firm, contemporary, and self-contained. Appendices cover Laplace transform and differential equations, dynamics, MATLAB and SIMULINK, treatise on stability concepts and tools, treatise on Routh-Hurwitz method, random optimization techniques as well as convex and non-convex problems, and sample midterm and endterm exams. The book is divided to the sequel 3 parts plus appendices. PART I: In this part of the book, chapters 1-5, we present foundations of linear control systems. This includes: the introduction to control systems, their raison detre, their different types, modelling of control systems, different methods for their representation and fundamental computations, basic stability concepts and tools for both analysis and design, basic time domain analysis and design details, and the root locus as a stability analysis and synthesis tool. PART II: In this part of the book, Chapters 6-9, we present what is generally referred to as the frequency domain methods. This refers to the experiment of applying a sinusoidal input to the system and studying its output. There are basically three different methods for representation and studying of the data of the aforementioned frequency response experiment: these are the Nyquist plot, the Bode diagram, and the Krohn-Manger-Nichols chart. We study these methods in details. We learn that the output is also a sinusoid with the same frequency but generally with different phase and magnitude. By dividing the output by the input we obtain the so-called sinusoidal or frequency transfer function of the system which is the same as the transfer function when the Laplace variable s is substituted with . Finally we use the Bode diagram for the design process. PART III: In this part, Chapter 10, we introduce some miscellaneous advanced topics under the theme fundamental limitations which should be included in this undergraduate course at least in an introductory level. We make bridges between some seemingly disparate aspects of a control system and theoretically complement the previously studied subjects. Appendices: The book contains seven appendices. Appendix A is on the Laplace transform and differential equations. Appendix B is an introduction to dynamics. Appendix C is an introduction to MATLAB, including SIMULINK. Appendix D is a survey on stability concepts and tools. A glossary and road map of the available stability concepts and tests is provided which is missing even in the research literature. Appendix E is a survey on the Routh-Hurwitz method, also missing in the literature. Appendix F is an introduction to random optimization techniques and convex and non-convex problems. Finally, appendix G presents sample midterm and endterm exams, which are class-tested several times.
Download or read book System Dynamics written by Katsuhiko Ogata and published by . This book was released on 2013-07-24 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: For junior-level courses in System Dynamics, offered in Mechanical Engineering and Aerospace Engineering departments. This text presents students with the basic theory and practice of system dynamics. It introduces the modeling of dynamic systems and response analysis of these systems, with an introduction to the analysis and design of control systems.
Download or read book Modern Control Systems written by Saurabh Mani Tripathi and published by Jones & Bartlett Publishers. This book was released on 2008 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a lucid introduction to modern control systems topics, this book has been designed as a short course on control systems or as a review for the professional engineer. Five chapters have been written to emphasize concepts & provide basic mathematical derivations. CD-ROM with MATLAB applications included.
Download or read book Introduction to Control System Analysis and Design written by Francis J. Hale and published by . This book was released on 1988 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
Download or read book An Introduction to Linear Control Systems written by Thomas E. Fortmann and published by CRC Press. This book was released on 1977-10-01 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Control Systems with an Introduction to System of Systems Engineering written by Thrishantha Nanayakkara and published by CRC Press. This book was released on 2018-09-03 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: From aeronautics and manufacturing to healthcare and disaster management, systems engineering (SE) now focuses on designing applications that ensure performance optimization, robustness, and reliability while combining an emerging group of heterogeneous systems to realize a common goal. Use SoS to Revolutionize Management of Large Organizations, Factories, and Systems Intelligent Control Systems with an Introduction to System of Systems Engineering integrates the fundamentals of artificial intelligence and systems control in a framework applicable to both simple dynamic systems and large-scale system of systems (SoS). For decades, NASA has used SoS methods, and major manufacturers—including Boeing, Lockheed-Martin, Northrop-Grumman, Raytheon, BAE Systems—now make large-scale systems integration and SoS a key part of their business strategies, dedicating entire business units to this remarkably efficient approach. Simulate Novel Robotic Systems and Applications Transcending theory, this book offers a complete and practical review of SoS and some of its fascinating applications, including: Manipulation of robots through neural-based network control Use of robotic swarms, based on ant colonies, to detect mines Other novel systems in which intelligent robots, trained animals, and humans cooperate to achieve humanitarian objectives Training engineers to integrate traditional systems control theory with soft computing techniques further nourishes emerging SoS technology. With this in mind, the authors address the fundamental precepts at the core of SoS, which uses human heuristics to model complex systems, providing a scientific rationale for integrating independent, complex systems into a single coordinated, stabilized, and optimized one. They provide readers with MATLAB® code, which can be downloaded from the publisher's website to simulate presented results and projects that offer practical, hands-on experience using concepts discussed throughout the book.
Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.
Download or read book An Introduction to System Modeling and Control written by John Chiasson and published by John Wiley & Sons. This book was released on 2022-03-22 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and straightforward exploration of the basic tools for the modeling, analysis, and design of control systems In An Introduction to System Modeling and Control, Dr. Chiasson delivers an accessible and intuitive guide to understanding modeling and control for students in electrical, mechanical, and aerospace/aeronautical engineering. The book begins with an introduction to the need for control by describing how an aircraft flies complete with figures illustrating roll, pitch, and yaw control using its ailerons, elevators, and rudder, respectively. The book moves on to rigid body dynamics about a single axis (gears, cart rolling down an incline) and then to modeling DC motors, DC tachometers, and optical encoders. Using the transfer function representation of these dynamic models, PID controllers are introduced as an effective way to track step inputs and reject constant disturbances. It is further shown how any transfer function model can be stabilized using output pole placement and on how two-degree of freedom controllers can be used to eliminate overshoot in step responses. Bode and Nyquist theory are then presented with an emphasis on how they give a quantitative insight into a control system's robustness and sensitivity. An Introduction to System Modeling and Control closes with chapters on modeling an inverted pendulum and a magnetic levitation system, trajectory tracking control using state feedback, and state estimation. In addition the book offers: A complete set of MATLAB/SIMULINK files for examples and problems included in the book. A set of lecture slides for each chapter. A solutions manual with recommended problems to assign. An analysis of the robustness and sensitivity of four different controller designs for an inverted pendulum (cart-pole). Perfect for electrical, mechanical, and aerospace/aeronautical engineering students, An Introduction to System Modeling and Control will also be an invaluable addition to the libraries of practicing engineers.
Download or read book INTRODUCTION TO CONTROL SYSTEMS written by GHOSH, ARUN K. and published by PHI Learning Pvt. Ltd.. This book was released on 2023-11-01 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of this text focuses on the basic concepts of control systems as before. It presents them in a succinct style and with about 400 worked-out examples. The study of control systems basically entails a knowledge of different kinds of systems that are presented via their transfer functions in the time domain and frequency domain. A major part of this study involves a knowledge of stability of systems in those domains. But then, a knowledge of study of multiple input multiple output (MIMO) systems as well as digital systems is also necessary. All these have been dealt with in lucid, student-friendly manner and with the assumption that the student has only HS-level mathematics background. NEW TO THIS EDITION • Quick reading guide. • Introduction of relevant mathematics wherever needed. • Emphasis on MCQs, which demand knowledge of intricate concepts. • Graphs and diagrams to illustrate concepts. TARGET AUDIENCE • B.Tech Electrical Engineering • B.Tech Electronics and Communication Engineering • B.Tech Instrumentation and Control Engineering • B.Tech Applied Electronics and Instrumentation Engineering • B.Tech Computer Science and Engineering
Download or read book Control Systems Technology written by Curtis D. Johnson and published by Pearson. This book was released on 2002 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents All of the major topics in modern analog and digital control systems, along with the practical, applications oriented knowledge and skills needed by technicians. It contains user-friendly conceptual explanations and clearly written mathematical developments. Examples of both Mathcad and MATLAB illustrate computer problem solving--but this book emphasizes the ability to use any suitable software to achieve successful results in solving problems and performing design. Chapter topics include Measurement; Laplace Transforms; Control System Models; Static and Dynamic Response; Stability; Frequency Response Analysis; Root Locus; State Variable Analysis; Introduction to Discrete Control Systems; Z-Transforms and Discrete State-Space Analysis; Digital Signal Representations; Discrete Time Control Systems; Stability of Discrete Control Systems; and Advanced Topics in Control Systems. For engineers and technicians working for companies that integrate control systems with the use of programmable logic controllers.
Download or read book Linear Control Systems written by Branislav Kisacanin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anyone seeking a gentle introduction to the methods of modern control theory and engineering, written at the level of a first-year graduate course, should consider this book seriously. It contains: A generous historical overview of automatic control, from Ancient Greece to the 1970s, when this discipline matured into an essential field for electrical, mechanical, aerospace, chemical, and biomedical engineers, as well as mathematicians, and more recently, computer scientists; A balanced presentation of the relevant theory: the main state-space methods for description, analysis, and design of linear control systems are derived, without overwhelming theoretical arguments; Over 250 solved and exercise problems for both continuous- and discrete-time systems, often including MATLAB simulations; and Appendixes on MATLAB, advanced matrix theory, and the history of mathematical tools such as differential calculus, transform methods, and linear algebra. Another noteworthy feature is the frequent use of an inverted pendulum on a cart to illustrate the most important concepts of automatic control, such as: Linearization and discretization; Stability, controllability, and observability; State feedback, controller design, and optimal control; and Observer design, reduced order observers, and Kalman filtering. Most of the problems are given with solutions or MATLAB simulations. Whether the book is used as a textbook or as a self-study guide, the knowledge gained from it will be an excellent platform for students and practising engineers to explore further the recent developments and applications of control theory.
Download or read book Feedback Control Theory written by John C. Doyle and published by Courier Corporation. This book was released on 2013-04-09 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent introduction to feedback control system design, this book offers a theoretical approach that captures the essential issues and can be applied to a wide range of practical problems. Its explorations of recent developments in the field emphasize the relationship of new procedures to classical control theory, with a focus on single input and output systems that keeps concepts accessible to students with limited backgrounds. The text is geared toward a single-semester senior course or a graduate-level class for students of electrical engineering. The opening chapters constitute a basic treatment of feedback design. Topics include a detailed formulation of the control design program, the fundamental issue of performance/stability robustness tradeoff, and the graphical design technique of loopshaping. Subsequent chapters extend the discussion of the loopshaping technique and connect it with notions of optimality. Concluding chapters examine controller design via optimization, offering a mathematical approach that is useful for multivariable systems.
Download or read book Control Systems for Complete Idiots written by David SMITH and published by . This book was released on 2019-07-12 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this day and age everything around us is automatic and our desire to automate more stuff is only increasing. Control systems finds its applications in everything you can possibly think of. The concept of Control system plays an important role in the working of, everything from home appliances to guided missiles to self-driving cars. These are just the examples of Control systems we create. Control systems also exist in nature. Within our own body, there are numerous control systems, such as the pancreas, which regulate our blood sugar. In the most abstract sense it is possible to consider every physical object a control system. Hence from an engineering perspective, it is absolutely crucial to be familiar with the analysis and designing methods of such Control systems. Control systems is one of those subjects that go beyond a particular branch of engineering. Control systems find its application in Mechanical, Electrical, Electronics, Civil Engineering and many other branches of engineering. Although this book is written in an Electrical engineering context, we are sure that others can also easily follow the topics and learn a thing or two about Control systems.In this book we provide a concise introduction into classical Control theory. A basic knowledge of Calculus and some Physics are the only prerequisites required to follow the topics discussed in the book. In this book, We've tried to explain the various fundamental concepts of Control Theory in an intuitive manner with minimum math. Also, We've tried to connect the various topics with real life situations wherever possible. This way even first timers can learn the basics of Control systems with minimum effort. Hopefully the students will enjoy this different approach to Control Systems. The various concepts of the subject are arranged logically and explained in a simple reader-friendly language with MATLAB examples.This book is not meant to be a replacement for those standard Control systems textbooks, rather this book should be viewed as an introductory text for beginners to come in grips with advanced level topics covered in those books. This book will hopefully serve as inspiration to learn Control systems in greater depths.
Download or read book Feedback Systems written by Karl Johan Åström and published by Princeton University Press. This book was released on 2021-02-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to the principles and applications of feedback systems—now fully revised and expanded This textbook covers the mathematics needed to model, analyze, and design feedback systems. Now more user-friendly than ever, this revised and expanded edition of Feedback Systems is a one-volume resource for students and researchers in mathematics and engineering. It has applications across a range of disciplines that utilize feedback in physical, biological, information, and economic systems. Karl Åström and Richard Murray use techniques from physics, computer science, and operations research to introduce control-oriented modeling. They begin with state space tools for analysis and design, including stability of solutions, Lyapunov functions, reachability, state feedback observability, and estimators. The matrix exponential plays a central role in the analysis of linear control systems, allowing a concise development of many of the key concepts for this class of models. Åström and Murray then develop and explain tools in the frequency domain, including transfer functions, Nyquist analysis, PID control, frequency domain design, and robustness. Features a new chapter on design principles and tools, illustrating the types of problems that can be solved using feedback Includes a new chapter on fundamental limits and new material on the Routh-Hurwitz criterion and root locus plots Provides exercises at the end of every chapter Comes with an electronic solutions manual An ideal textbook for undergraduate and graduate students Indispensable for researchers seeking a self-contained resource on control theory
