Download or read book Introduction to Computer aided Manufacturing in Electronics written by Douglas A. Cassell and published by John Wiley & Sons. This book was released on 1972 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing Technology in the Electronics Industry written by P. Edwards and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sequence of events which led to the writing of this book started at a seminar on Manufacturing Technology in the Electronics Industry given by the Institution of Production Engineers in 1987. The seminar identified that the field of manufacturing engineering for the electronics industry was effectively missing from the vast majority of production engineering degree courses. The reason for this was that production engineering departments typically spring from mechanical engineering departments. This leads to a mechanical bias in the practical aspects of such courses. The consequence of this was that electronics companies could not recruit graduates with both relevant production engineering and electronic engineering backgrounds. This necessitated either recruiting production engineering graduates and giving them the necessary electronic engineering training, or giving production engineering training to electronic engineering graduates. A consequence of the lack of courses in a subject is that there is also a lack of relevant textbooks in the area, as most textbooks are intended to tie into courses. In the field of manufacturing technology for the electronics industry, existing textbooks tend to be highly specialized and mainly concerned with the fabrication of semiconductor devices.
Download or read book An Introduction to Computer Aided Production Management written by S. Childe and published by Springer Science & Business Media. This book was released on 1996-11-30 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The control of manufacturing operations is of crucial importance in industry. The correct regulation of manufacturing activities makes the difference between meeting and missing customer requirements. Nowadays computerised solutions are available as an aid to production management. However, many companies proceed to use sophisticated computer tools without first understanding the basic operating principles. This book is written for students of manufacturing systems as well as people in industry who need a concise explanation of the concepts of Computer Aided Production Management (CAPM) or who may be looking for new ideas.
Download or read book Computer aided Manufacturing written by Tien-Chien Chang and published by . This book was released on 1998 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: For one or two semester courses in computer aided manufacturing and automated manufacturing, in industrial and mechanical engineering departments. An in-depth introduction to the science, math and engineering of computer aided manufacturing methods. This book provides a comprehensive view of manufacturing planning, design, automation, flexible automation, and computers in manufacturing using a strong science-based and analytical approach.
Download or read book Electronic Product Design for Automated Manufacturing written by Richard Stillwell and published by Routledge. This book was released on 2018-02-06 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyzes all phases of the electronic product design process, including management, planning, quality control, design, manufacturing, and automation. A reference/textbook for students and professionals in such fields as electronics, manufacturing, circuit design, computer science. Annotation copyrig
Download or read book Computer Aided Design and Manufacturing written by Zhuming Bi and published by John Wiley & Sons. This book was released on 2020-02-04 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broad coverage of digital product creation, from design to manufacture and process optimization This book addresses the need to provide up-to-date coverage of current CAD/CAM usage and implementation. It covers, in one source, the entire design-to-manufacture process, reflecting the industry trend to further integrate CAD and CAM into a single, unified process. It also updates the computer aided design theory and methods in modern manufacturing systems and examines the most advanced computer-aided tools used in digital manufacturing. Computer Aided Design and Manufacturing consists of three parts. The first part on Computer Aided Design (CAD) offers the chapters on Geometric Modelling; Knowledge Based Engineering; Platforming Technology; Reverse Engineering; and Motion Simulation. The second part on Computer Aided Manufacturing (CAM) covers Group Technology and Cellular Manufacturing; Computer Aided Fixture Design; Computer Aided Manufacturing; Simulation of Manufacturing Processes; and Computer Aided Design of Tools, Dies and Molds (TDM). The final part includes the chapters on Digital Manufacturing; Additive Manufacturing; and Design for Sustainability. The book is also featured for being uniquely structured to classify and align engineering disciplines and computer aided technologies from the perspective of the design needs in whole product life cycles, utilizing a comprehensive Solidworks package (add-ins, toolbox, and library) to showcase the most critical functionalities of modern computer aided tools, and presenting real-world design projects and case studies so that readers can gain CAD and CAM problem-solving skills upon the CAD/CAM theory. Computer Aided Design and Manufacturing is an ideal textbook for undergraduate and graduate students in mechanical engineering, manufacturing engineering, and industrial engineering. It can also be used as a technical reference for researchers and engineers in mechanical and manufacturing engineering or computer-aided technologies.
Download or read book Computer Integrated Electronics Manufacturing and Testing written by Arabian and published by CRC Press. This book was released on 2020-11-25 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes this process at it relates to the electronics industry, focusing on such areas as printed wiring boards, networking, automatic assembly, surface mount technology, tape automated bonding, bar coding, and electro-static discharge. Also studies the effects of group work ethics as a factor in
Download or read book An Introduction to CAD for VLSI written by Stephen Trimberger and published by Springer. This book was released on 1987-06-30 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last decade has seen an explosion in integrated circuit technology. Improved manufacturing processes have led to ever smaller device sizes. Chips with over a hundred thousand transistors have become common and performance has improved dramatically. Alongside this explosion in manufacturing technology has been a much-less-heralded explosion of design tool capability that has enabled designers to build those large, complex devices. The tools have allowed designers to build chips in less time, reducing the cost and risk. Without the design tools, we would not now be seeing the full benefits of the advanced manufacturing technology. The Scope of This Book This book describes the implementation of several tools that are commonly used to design integrated circuits. The tools are the most common ones used for computer aided design and represent the mainstay of design tools in use in the industry today. This book describes proven techniques. It is not a survey of the newest and most exotic design tools, but rather an introduction to the most common, most heavily-used tools. It does not describe how to use computer aided design tools, but rather how to write them. It is a view behind the screen, describing data structures, algorithms and code organization. This book covers a broad range of design tools for Computer Aided Design (CAD) and Computer Aided Engineering (CAE). The focus of the discussion is on tools for transistor-level physical design and analysis.
Download or read book CIRP Encyclopedia of Production Engineering written by The International Academy for Produ and published by Springer. This book was released on 2014-04-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CIRP Encyclopedia covers the state-of-art of advanced technologies, methods and models for production, production engineering and logistics. While the technological and operational aspects are in the focus, economical aspects are addressed too. The entries for a wide variety of terms were reviewed by the CIRP-Community, representing the highest standards in research. Thus, the content is not only evaluated internationally on a high scientific level but also reflects very recent developments.
Download or read book Computer Aided Design and Manufacture written by Great Britain. Advisory Council for Applied Research and Development and published by . This book was released on 1980 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Report on the use of computer aided design in the UK - reviews computer aided design and draughting in mechanical and electrical engineering, as well as research and development activities, and includes recommendations urging appropriate UK industrial policies. Diagrams.
Download or read book An Introduction to CAD for VLSI written by Stephen M. Trimberger and published by . This book was released on 2014-01-15 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Computer Aided Manufacturing 2 e written by G.S. Sawhney and published by I K International Pvt Ltd. This book was released on 2011-01-11 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written with the fourth-year engineering students of undergraduate level in mind, this well set out textbook explains the fundamentals of Computer Aided Manufacturing (CAM) written in question-answer form, the book is precise and easy to understand. Computer aided manufacturing and robotics play a vital role in implementing automation in the industry. It is, therefore, essential for engineering students to have sound knowledge of the basics of CAM and robotics. This book has been designed to provide the essential and fundamental understanding of NC machines, NC part programming, system devices, computer integrated manufacturing system and robotics. In the present second edition, the book has been thoroughly revised and enlarged. Modification to every chapter has been carried out on the basis of suggestions received. Additional typical problems based on the examination papers of various technical universities have been included with solutions for easy understanding.
Download or read book Computer Numerical Control Machines and Computer Aided Manufacture written by P. Radhakrishnan and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge of CNC programming using software packages, programmable machine control and computer aided inspection are essential for the effective operation of CNC machines. This book focuses on CNC machine tools. It highlights the training requirements of technicians and engineers in tools manufacturing.
Download or read book The CAD CAM Primer written by Daniel J. Bowman and published by Sams Technical Publishing. This book was released on 1984 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: CAD/CAM overview; Anatomy of a graphics workstation; Input; Output; One picture is worth 25,000 words; Data highways; Engineer's dialogue with the CRT; Applications: new directions for engineering; The third wave in engineering (cost justification); An effective CAD/CAM vocabulary.
Download or read book Computer Aided Design in Control and Engineering Systems written by P. Martin Larsen and published by Elsevier. This book was released on 2014-05-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Design in Control and Engineering Systems contains the proceedings of the 3rd International Federation of Automatic Control/International Federation for Information Processing Symposium held in Lyngby, Denmark, from July 31 to August 2, 1985. The papers review the state of the art and the trends in development of computer aided design (CAD) of control and engineering systems, techniques, procedures, and concepts. This book is comprised of 74 chapters divided into 17 sections and begins with a description of a prototype computer environment that combines expert control system analysis and design tools. The discussion then turns to decision support systems which could be used to address problems of management and control of large-scale multiproduct multiline batch manufacturing outside the mechanical engineering industries. The following chapters focus on the use of CAD in control education, industrial applications of CAD, and hardware/software systems. Some examples of universal and specialized CAD packages are presented, and applications of CAD in electric power plants, process control systems, and transportation systems are highlighted. The remaining chapters look at CAD/computer aided engineering/computer aided manufacturing systems as well as the use of mathematical methods in CAD. This monograph will be of interest to practitioners in computer science, computer engineering, and industrial engineering.
Download or read book Integrating Advanced Computer Aided Design Manufacturing and Numerical Control Principles and Implementations written by Xu, Xun and published by IGI Global. This book was released on 2009-01-31 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book presents basic principles of geometric modelling while featuring contemporary industrial case studies"--Provided by publisher.
Download or read book Computer Integrated Manufacturing written by Paul G. Ranky and published by Prentice Hall. This book was released on 1986 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
