Download or read book Interpretation of Moisture Damage in Asphalt Mixtures Using Existing and Alternative Test Methods written by Shivpal Yadav and published by . This book was released on 2020 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Moisture Damage in Asphalt Concrete written by Russell G. Hicks and published by Transportation Research Board. This book was released on 1991 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to pavement designers, construction engineers, maintenance engineers, and others interested in avoiding or limiting moisture damage in asphalt concrete. Information is provided on physical and chemical explanations for moisture damage in asphalt concrete, along with a discussion of current practices and test methods for determining or reducing the susceptibility of various asphalt concrete components and mixtures to such damage. Moisture damage in asphalt concrete is a nationwide problem which often necessitates premature replacement of highway pavement surfaces. This report of the Transportation Research Board describes the underlying physical and chemical phenomena responsible for such damage. Current test methods used to determine the susceptibility of asphalt concretes, or their constituents, to moisture damage are described and evaluated. Additionally, current practices for minimizing the potential for moisture damage are examined.

Download or read book An Innovative Method for Interpretation of Asphalt Boil Test written by Akhtarhusein A. Tayebali and published by . This book was released on 2018 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this study, an innovative method is presented to interpret a visually subjective test method related to the compatibility of asphalt and aggregate to moisture damage. This methodology measures the loss of adhesion between asphalt and aggregate using a colorimeter device. Visual test methods have been considered as subjective tests for the past seven or more decades, but with the advancement of technology and, in particular, the use of colorimeter devices, the results of these tests can now be interpreted in a quantitative manner. Although not shown in this particular study, this approach should be applicable to all visually subjective and even mechanistic or semimechanistic test methods that are used to evaluate asphalt mixtures' susceptibility to moisture damage. The application of this approach has immense potential for other fields in asphalt technology such as tack coat curing-breaking time and visual survey of oxidation of asphalt concrete pavements.

Download or read book Moisture Sensitivity written by Asphalt Institute and published by . This book was released on 2007 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: The premier guide for understanding the causes and treatments for moisture damage of HMA (hot mix asphalt), this manual helps technicians learn test methods to evaluate damage potential, treatments to prevent moisture damage, and best practices to minimize moisture damage in HMA pavements.

Download or read book Development of Simple Performance Tests Using Laboratory Test Procedures to Illustrate the Effects of Moisture Damage on Hot Mix Asphalt written by Jason Bausano and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been extensively documented since the late 1970's that moisture damage occurs in hot mix asphalt (HMA) pavements. A variety of test methods are available that test an HMA's ability to resist moisture sensitivity. There are also some test methods that look at an asphalt binder's moisture susceptibility. The current test method for detecting moisture sensitivity in HMA is American Association of State Highway and Transportation Officials (AASHTO) T283: Resistance of Compacted Bituminous Mixture to Moisture-Induced Damage. Inclusion of this test method in Superpave did not consider the change in specimen size from 100mm to 150mm nor difference in compaction method. The procedures in AASHTO T283 consider the loss of strength due to freeze/thaw cycling and the effects of moisture existing in specimens compared to unconditional specimens. However, mixtures do not experience such a pure phenomenon. Pavements undergo cycling of environmental conditions, but when moisture is present, there is repeated hydraulic loading with the development of pore pressure in mixtures. Thus, AASHTO T283 does not consider the effect of pore pressure, but rather considers a single load effect on environmentally conditioned specimens. This report develops moisture susceptibility procedures which would utilize repeated loading test devices (dynamic modulus or asphalt pavement analyzer) of specimens in saturated conditions and be compared to unconditioned specimens in a dry test environment. In addition to HMA mixture testing, a modified dynamic shear rheometer will be used to determine if an asphalt binder or mastic is moisture susceptible. Moisture susceptible criteria was developed using the dynamic complex modulus, asphalt pavement analyzer, and dynamic shear rheometer. Evaluation of AASHTO T283 for 150mm Superpave Gyrtaory compacted specimens is also detailed in this report along with a new criterion.

Download or read book Evaluation of Procedures Used to Predict Moisture Damage in Asphalt Mixtures written by Kevin D. Stuart and published by . This book was released on 1986 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Procedures for evaluating the moisture susceptibility of asphalt mixtures were compared by performing them on mixtures having a known history of susceptibility. Data included the retained ratios, visual stripping, mechanical values (tensile strength, stability, etc.), saturation, and swell. The most promising procedures appeared to be the NCHRP 246 and NCHRP 274.

Download or read book Test Method to Determine Aggregate asphalt Adhesion Properties and Potential Moisture Damage written by Andrew Hanz and published by . This book was released on 2007 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Innovative Assessment Tests and Indicators for Performance based Asphalt Mix Design written by Hamza Alkuime and published by . This book was released on 2019 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt mixes are designed to provide adequate resistance to various distresses including cracking, rutting, and moisture damage. Recently, more efforts are directed towards including performance assessment tests during the design and production of asphalt mixes. Performance-Engineered Mix Design (PEMD) or Balanced Mix Design (BMD) is a new and innovative design approach that incorporates performance assessment tests to optimize the design of asphalt mixes to provide adequate performance. Although transportation agencies are motivated to implement the PEMD approach, several research knowledge gaps and concerns need to be addressed before PEMD successful implementation. This research study aims to advance, develop, and implement performance-engineered design approach and specifications to extend the service life of asphalt pavements.The first phase of this research developed and evaluated a new and innovative monotonic cracking performance indicator called Weibull Cracking Resistance Index (WeibullCRI). The proposed indicator describes the entire load-displacement curve, which overcomes the limitations of the existing performance indicators. First, WeibullCRI was examined using an extensive laboratory evaluation of 16 different asphalt mixes. The results indicated that WeibullCRI was sensitive to variation in binder content and binder PG and the results were in good agreement with the expected cracking resistance based on the composition of the studied mixes. In addition, WeibullCRI had low variability in test results and higher number of various statistical groups. Next, the applicability of WeibullCRI as a unified approach to analyze the results of various monotonic assessment tests was investigated using data generated by other researchers and reported in the literature. The results indicated that WeibullCRI is able to interpret the testing results of various monotonic performance assessment tests (i.e., IDT- intermediate temperature, Semi-Circle Bending [SCB]- intermediate temperature, SCB-low temperature, Disk-Shaped Compact Tension [DCT], and Simple Punching Shear Test [SPST]) and various displacement measurement methods (i.e., actuator vertical displacement and Crack Mouth Opening Displacement [CMOD]). WeibullCRI was also sensitive to variation in test conditions (i.e., specimen notch depth, thickness, and air void content) and mix composition proportions (i.e., binder content, binder grade, aggregate type, NMAS, aging, rejuvenator dosages, and Recycled Asphalt Pavement [RAP] materials).The second phase of this study reviewed and evaluated the current monotonic cracking performance assessment tests and indicators including the developed WeibullCRI used to assess asphalt mix resistance to cracking. In this phase, the testing requirements of various test standards, key publications, concepts, calculation methods, physical meaning, and advantages and disadvantages of various performance indicators were reviewed. Then, the study investigated the validity of the most promising testing standards and indicators. Three testing standards and 12 performance indicators were considered. Several aspects were examined including 1) investigate the fundamental meaning of the variation in the load-displacement curve in terms of the change in mix resistance to cracking, 2) sensitivity of performance indicators to mix compositions, 3) variability in test results, 4) number of various statistical groups, 5) correlation between various performance indicators, 6) direct correlation between laboratory results of monotonic performance tests and indicators with the observed field cracking, and 7) ability to develop PEMD specifications. A comprehensive laboratory investigation was conducted using 33 different asphalt mixes included six Laboratory Mixed-Laboratory Compacted (LMLC) and 10 Plant Mixed-Laboratory Compacted (PMLC) asphalt mixes, and 17 field projects with known cracking performance. The results showed that WeibullCRI calculated from the IDT test to have the lowest test variability, maximum number of Tukey's honestly significant difference (HSD) groups, and have excellent correlation with cyclic cracking resistance assessment indicators as compared to the other monotonic performance indicators. In addition, the results demonstrated that there was no direct correlation between all monotonic performance indicators and the observed field cracking performance, therefore an alternative approach was proposed, evaluated, and validated to develop performance thresholds for the selected performance indicators. Three pass/fail cracking performance thresholds were proposed for WeibullCRI to distinguish between asphalt mixes with good, fair, and poor cracking resistance using the proposed approach.The third phase of this study focused on the development and evaluation of a new cyclic cracking assessment test called Multi-Stage Semi-circle bending Dynamic (MSSD). The test offers advantages over the available monotonic and dynamic cracking assessment tests and addresses major concerns to implement the PEMD (i.e., performance test validity, complex specimen preparation, and testing time). The developed MSSD test simulates the repeated loading (cyclic) in a reasonable testing time (less than 9 hours per test regardless of mix type), has a fixed loading sequence that works for mixes with different characteristics (e.g., mix composition, percent air void content, thickness, etc.), and utilizes testing equipment and specimen geometry similar to that used in monotonic tests. The laboratory evaluation results showed that the proposed test and its derived performance indicators were sensitive to mix composition and had lower variability compared to other dynamic tests. In addition, the MSSD performance indicators correlated well with the observed cracking performance in the field and were able to distinguish between projects with good and poor resistance to cracking. Based on the evaluation results, three pass/fail cracking performance thresholds were proposed to distinguish between asphalt mixes with good, fair, and poor resistance to cracking.The fourth phase of this research examined the most promising tests and performance indicators to evaluate the resistance of asphalt mixtures to rutting. Two tests (i.e., Hamburg Wheel Tracking test [HWTT], and Asphalt Pavement Analyzer [APA] rut test) and three rutting performance indicators (i.e., HWTT rut depth after 15,000 passes [HWTT15000], HWTT rut depth at 20,000 passes [HWTT20000], and APA rut depth after 8,000 cycles [APA8000]) were considered. An intensive laboratory investigation was conducted that included six LMLC, 10 PMLC, and field cores extracted from 17 field projects. The research findings showed that both HWTT and APA rut test provided similar rutting assessment for the evaluated mixes. The study recommended using the HWTT over the APA rut test since HWTT can be also used to assess the resistance of asphalt mixtures to moisture damage to moisture damage. Also, the study recommended using HWTT15000 over HWTT20000 as a performance indicator since it requires less testing time.The final phase of this research provided recommendations of the best testing standards, performance indicators, and performance specifications to assess asphalt mix resistance to cracking and rutting. In addition, it provided guidelines to demonstrate the use of the proposed tools during the design and/or production of asphalt mixes. It also proposed standards testing procedures for the newly developed WeibullCRI performance indicator and MSSD test.

Download or read book Evaluation of Moisture Damage in Asphalt Mixtures by Tunnicliff and Root Procedure NCHRP 274 written by and published by . This book was released on 1990 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comparative Evaluation of Moisture Susceptibility Test Methods for Routine Usage in Asphalt Mixture Design written by Christopher J. DeCarlo and published by . This book was released on 2020 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt materials experience substantial amounts of environmental damage throughout their lives as surface layers in pavements. One of the most prominent forms of environmental damage, moisture-induced damage, is caused by the weakening of internal bonds of the material because of the presence of moisture in the voids of asphalt mixtures and is a common problem for asphalt pavements in wet climates. Moisture-induced damage is typically accounted for during asphalt mixture design by conducting performance tests to ensure the material is not susceptible to severe damage from moisture, although many of these methods have seen mixed amounts of success historically. The main objective of this study is to evaluate the ability of multiple asphalt mixture moisture susceptibility tests to identify good and poor performing mixtures with respect to moisture-induced damage to replace current mix design testing requirements. Ten plant-produced hot mix asphalt materials with established good and poor field moisture performance were subjected to various moisture susceptibility test methods. The results from these procedures are assessed to determine which procedure is most effective and practical as a moisture susceptibility test for routine usage during asphalt mixture design for transportation agencies. Results from this study suggest that performance tests with stiffness-based measurements, such as dynamic modulus paired with moisture conditioning and the saturated aging tensile stiffness procedure, show better correlation to field performance than traditional test methods such as AASHTO T-283, Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage, and that the Hamburg wheel tracker test is the most effective and practical test method to reliably identify mixtures prone to experiencing moisture-induced damage.

Download or read book Stripping and Moisture Damage in Asphalt Mixtures written by Robert Benton McGennis and published by . This book was released on 1984 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Moisture Damage in Asphalt Mixtures written by Kevin D. Stuart and published by . This book was released on 1990 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state-of-the-art report is on the moisture susceptibility of asphalt mixtures used in highway pavements. It addresses the known causes of moisture damage, methods for controlling damage such as antistripping additives, and moisture damage tests. Several current research studies are also given in the report. This report is mainly concerned with dense-graded hot asphalt mixtures as most of the literature discusses these types of mixtures. Some information on chip seals and emulsion mixtures is also included. One of the intents of this report is to indicate where data is lacking so that research can be performed in these areas.

Download or read book A Coupled Micromechanical Model of Moisture induced Damage in Asphalt Mixtures written by Silvia Caro Spinel and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The deleterious effect of moisture on the structural integrity of asphalt mixtures has been recognized as one of the main causes of early deterioration of asphalt pavements. This phenomenon, usually referred to as moisture damage, is defined as the progressive loss of structural integrity of the mixture that is primarily caused by the presence of moisture in liquid or vapor state. Moisture damage is associated with the development of different physical, mechanical, and chemical processes occurring within the microstructure of the mixture at different intensities and rates. Although there have been important advancements in identifying and characterizing this phenomenon, there is still a lack of understanding of the damage mechanisms occurring at the microscopic level. This situation has motivated the research work reported in this dissertation. The main objective of this dissertation is to formulate and apply a numerical micromechanical model of moisture-induced damage in asphalt mixtures. The model focuses on coupling the effects of moisture diffusion-one of the three main modes of moisture transport within asphalt mixtures-with the mechanical performance of the microstructure. Specifically, the model aims to account for the effect of moisture diffusion on the degradation of the viscoelastic bulk matrix of the mixture (i.e., cohesive degradation) and on the gradual deterioration of the adhesive bonds between the aggregates and the asphalt matrix (i.e., adhesive degradation). The micromechanical model was applied to study the role of some physical and mechanical properties of the constitutive phases of the mixtures on the susceptibility of the mixture to moisture damage. The results from this analysis suggest that the diffusion coefficients of the asphalt matrix and aggregates, as well as the bond strength of the aggregate-matrix interface, have the most influence on the moisture susceptibility of the mixtures. The micromechanical model was further used to investigate the influence of the void phase of asphalt mixtures on the generation of moisture-related deterioration processes. Two different probabilistic-based approaches were used to accomplish this objective. In the first approach, a volumetric distribution of air void sizes measured using X-Ray Computed Tomography in a dense-graded asphalt mixture was used to generate probable void structures in a microstructure of an asphalt mixture. In the second approach, a stochastic modeling technique based on random field theory was used to generate probable air void distributions of the mixture. In this second approach, the influence of the air void was accounted for by taking the physical and mechanical properties of the asphalt matrix dependent on probable void distributions. Although both approaches take into consideration the characteristics of the air void phase on the mechanical response of the mixtures subjected to moist environments, the former explicitly introduces the air phase within the microstructure while the latter indirectly includes its effects by modifying the material properties of the bulk matrix. The results from these simulations demonstrated that the amount, variability and location of air voids are decisive in determining the moisture-dependent performance of asphalt mixtures. The results from this dissertation provide new information on the kinetics of moisture damage mechanisms in asphalt mixtures. In particular, the results obtained from applying the micromechanical model permitted identification of the relative influence of the characteristics of the constitutive phases of a mixture on its moisture-related mechanical performance. This information can be used as part of design methodologies of asphalt mixtures, and/or as an input in life-cycle analysis models and maintenance programs of road infrastructure.

Download or read book Investigation of Conditions for Moisture Damage in Asphalt Concrete and Appropriate Laboratory Test Methods written by Qing Lü and published by . This book was released on 2005 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Water Sensitivity of Asphalt aggregate Mixes written by Ronald L. Terrel and published by National Research Council. This book was released on 1994 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research presented in this report was conducted to identify the important factors influencing the water sensitivity of asphalt paving mixtures, and to develop a test method to evaluate water sensitivity of asphalt concrete mixtures for mix design. The test method was to be performance related. A review of current procedures revealed that no single method was suitable for evaluation and related to field performance. Based on a hypothesis that air voids in the mixture may be the major source and cause of water damage, a test system was developed to evaluate the major factors that influence water sensitivity. The Environmental Conditioning System (ECS) was used to develop a test procedure that includes specimen preparation; measurement of permeability using air, water, or both; vacuum wetting; cycling at various temperatures; and continuous repeated loading while monitoring resilient modulus after each conditioning cycle.

Download or read book Alternative Test Methods to Evaluate Moisture Sensitivity of Asphalt Concrete written by Abhilash Kusam and published by . This book was released on 2017 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Influence of Fundamental Material Properties and Air Void Structure on Moisture Damage of Asphalt Mixes written by Edith Arambula Mercado and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Moisture damage in asphalt mixes refers to the loss of serviceability due to the presence of moisture. The extent of moisture damage, also called moisture susceptibility, depends on internal and external factors. The internal factors relate to the properties of the materials and the microstructure distribution, while the external factors include the environmental conditions, production and construction practices, pavement design, and traffic level. The majority of the research on moisture damage is based on the hypothesis that infiltration of surface water is the main source of moisture. Of the two other principal mechanisms of water transport, permeation of water vapor and capillary rise of subsurface water, the latter has been least explored. A laboratory test and analysis methods based on X-ray computed tomography (CT) were established to assess the capillary rise of water. The amount and size of air voids filled with water were used in the capillary rise equation to estimate the distribution of the contact angles between the water and the mastic. The results were able to show the influence of air void size on capillary rise and contact angles. The relationship between air void structure and moisture susceptibility was evaluated using a fundamental fracture model based on dissipated energy of viscoelastic materials. Detailed description is provided in this dissertation on the deduction of the model equation, the selection of the model parameters, and the required testing protocols. The model parameters were obtained using mechanical tests and surface energy measurements. The microstructure of asphalt mixes prepared in the laboratory having different air void structures was captured using X-ray CT, and image analysis techniques were used to quantify the air void structure and air void connectivity. The air void structure was found to influence the mix resistance to moisture damage. To validate the fracture model, asphalt mixes with known field performance were tested. The results demonstrated that the fracture model is an effective tool to characterize moisture susceptibility. In addition, the model showed good correlation with the reported field performance of the asphalt mixes. The findings of this study will be useful to highway engineers to evaluate asphalt mixes with alternative mix designs and internal air void structures and to estimate the rate of moisture infiltration in order to maximize the resistance of asphalt mixes to moisture damage.