Download or read book TMS 2012 141st Annual Meeting and Exhibition Materials Properties Characterization and Modeling written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2012-05-15 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains chapters on cutting-edge developments presented at the TMS annual conference of 2012.
Download or read book Effects of Hydrogen on Materials written by Brian Somerday and published by ASM International. This book was released on 2009-01-01 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and commercial activity in developing hydrogen as a fuel is driving increased attention on hydrogen-materials interactions. In particular, a renewed and intensifying interest in developing hydrogen fuel cells has prompted extensive research with the objective to enable the safe design of components for transporting and storing hydrogen fuel. This volume is the proceedings from the premier conference on hydrogen effects in materials, bridging scientific research and engineering applications. The proceedings volume highlights several themes: the technological importance of hydrogen effects on structural materials; the impact of bridging science and engineering; and the opportunity to apply new research tools, including simulation techniques as well as experimental methods.
Download or read book THERMEC 2018 written by Raj Shabadi and published by Trans Tech Publications Ltd. This book was released on 2018-12-26 with total page 2584 pages. Available in PDF, EPUB and Kindle. Book excerpt: 10th International Conference on Processing and Manufacturing of Advanced Materials Selected, peer reviewed papers from the 10th International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, July 09 - July 13, 2018, Paris, France
Download or read book ANCILLARY EQUIPMENT AND ELECTRICAL EQUIPMENT Volume I written by and published by EOLSS Publications. This book was released on 2010-12-03 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ancillary Equipment and Electrical Equipment is a component of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The volume presents state-of-the art subject matter of various aspects of Ancillary Equipment And Electrical Equipment such as: Seawater Supply Pump; Cooling Water Recirculation Pump; Brine Recirculation Pump; Brine Blowdown Pump; Brine Heater Condensate Pump; Minor Pumps For Desalination Plants; The Installation Criteria And The Layout; Hydraulic Aspects In Design And Operation Of Axial-Flow Pumps; Description Of Surface Vortices With Regard To Common Design Criteria Of Intake Chambers; Vacuum Creating Equipment; Filtering Equipment; Chemical Dosing Stations; On-Load Sponge Ball Cleaning System; Power Supply Systems And Electrical Equipment For Desalination Plants; Composite Materials For Pressure Vessels And Pipes; Thermal Stresses In Vessels, Piping, And Components; Pressure Vessels And Piping Systems: Reliability, Risk And Safety Assessment; Pressure Vessels And Shell Structures; Pipeline Operations; Steel And Pipe Mill Techology; Pipeline Structural Integrity; Pipeline System Automation And Control; Pump And Compressor Operation; Environmental Conservation Practices For Pipelines. This volume is aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers
Download or read book Oil and Gas Pipelines written by R. Winston Revie and published by John Wiley & Sons. This book was released on 2015-04-01 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and detailed reference guide on the integrity and safety of oil and gas pipelines, both onshore and offshore Covers a wide variety of topics, including design, pipe manufacture, pipeline welding, human factors, residual stresses, mechanical damage, fracture and corrosion, protection, inspection and monitoring, pipeline cleaning, direct assessment, repair, risk management, and abandonment Links modern and vintage practices to help integrity engineers better understand their system and apply up-to-date technology to older infrastructure Includes case histories with examples of solutions to complex problems related to pipeline integrity Includes chapters on stress-based and strain-based design, the latter being a novel type of design that has only recently been investigated by designer firms and regulators Provides information to help those who are responsible to establish procedures for ensuring pipeline integrity and safety
Download or read book Proceedings of the International Pipeline Conference written by and published by . This book was released on 2007 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 2014 Energy Materials Conference written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2015-04-06 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: This DVD contains a collection of papers presented at EnergyMaterials 2014, a conference organized jointly by The ChineseSociety for Metals (CSM) and The Minerals, Metals & MaterialsSociety (TMS), and held November 4-6, 2014, in Xi’an, ShaanxiProvince, China. With the rapid growth of the world’s energyproduction and consumption, the important role of energy materialshas achieved worldwide acknowledgement. Material producers andconsumers constantly seek the possibility of increasing strength,improving fabrication and service performance, simplifyingprocesses, and reducing costs. Energy Materials 2014 has provided aforum for academics, researchers, and engineers around the world toexchange state-of-the-art development and information on issuesrelated to energy materials. The papers on the DVD are organized around the followingtopics: Materials for Coal-Based Systems Materials for Gas Turbine Systems Materials for Nuclear Systems Materials for Oil and Gas Materials for Pressure Vessels
Download or read book Handbook of Pipeline Engineering written by ABCM – Brazilian Society of Mechanical Sciences and Engineering and published by Springer Nature. This book was released on with total page 1700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book HSLA Steels 2015 Microalloying 2015 Offshore Engineering Steels 2015 written by The Chinese Society for Metals and published by Springer. This book was released on 2017-03-22 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the joint conference of the 7th International Conference on High Strength Low Alloy Steels (HSLA Steels 2015), the International Conference on Microalloying 2015 (Microalloying 2015), and the International Conference on Offshore Engineering Steels 2015 (OES 2015). The papers focus on the exchange of the latest scientific and technological progresses on HSLA steels, microalloying steels, and offshore engineering steels over the past decades. The contributions are intended to strengthen cooperation between universities and research institutes, and iron and steel companies and users, and promote the further development in the fields all over the world.
Download or read book Energy Materials 2014 written by The Minerals, Metals & Materials Society (TMS) and published by Springer. This book was released on 2017-03-16 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 8th Pacific Rim International Conference on Advanced Materials and Processing PRICM 8 written by FernD.S. Marquis and published by Springer. This book was released on 2017-03-21 with total page 3431 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRICM-8 features the most prominent and largest-scale interactions in advanced materials and processing in the Pacific Rim region. The conference is unique in its intrinsic nature and architecture which crosses many traditional discipline and cultural boundaries. This is a comprehensive collection of papers from the 15 symposia presented at this event.
Download or read book Advanced Steels written by Yuqing Weng and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Steels: The Recent Scenario in Steel Science and Technology" contains more than 50 articles selected from the proceedings of the International Conference on Advanced Steels (ICAS) held during 9-11, Nov, 2010 in Guilin, China. This book covers almost all important aspects of steels from physical metallurgy, steel grades, processing and fabrication, simulation, to properties and applications. The book is intended for researchers and postgraduate students in the field of steels, metallurgy and materials science. Prof. Yuqing Weng is an academician of Chinese Academy of Engineering and the president of The Chinese Society for Metals. Prof. Han Dong is the vice president of Central Iron & Steel Research Institute and the director of National Engineering Research Center of Advanced Steel Technology, China. Prof. Yong Gan is an academician of Chinese Academy of Engineering, the vice president of Chinese Academy of Engineering and the president of Central Iron & Steel Research Institute, China.
Download or read book Automotive Steels written by Radhakanta Rana and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Steels: Design, Metallurgy, Processing and Applications explores the design, processing, metallurgy, and applications of automotive steels. While some sheet steels are produced routinely in high volume today, there have been significant advances in the use of steel in the automotive industry. This book presents these metallurgical and application aspects in a way that is not available in the current literature. The editors have assembled an international team of experts who discuss recent developments and future prospects for automotive steels, compiling essential reading for both academic and industrial metallurgists, automotive design engineers, and postgraduate students attending courses on the metallurgy of automotive materials. - Presents recent developments on the design, metallurgy, processing, and applications of automotive steels - Discusses automotive steels that are currently in the early stages of research, such as low-density and high modulus steels that are driving future development - Covers traditional steels, advanced high strength steels, elevated Mn steels and ferrous composite materials
Download or read book Advances in Microalloyed Steels written by Pello Uranga and published by MDPI. This book was released on 2021-03-04 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: In response to the demanding requirements of different sectors, such as construction, transportation, energy, manufacturing, and mining, new generations of microalloyed steels are being developed and brought to market. The addition of microalloying elements, such as niobium, vanadium, titanium, boron, and/or molybdenum, has become a key tool in the steel industry to reach economically-viable grades with increasingly higher mechanical strength, toughness, good formability, and weldable products. The challenges that microalloying steel production faces can be solved with a deeper understanding of the effects that these microalloying additions and combinations of them have during the different steps of the steelmaking process.
Download or read book Proceedings of the 6th International Conference on Recrystallization and Grain Growth ReX GG 2016 written by Elizabeth Holm and published by Springer. This book was released on 2016-11-22 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection represents a cross-section of the papers presented at the 6th International Conference on Recrystallization and Grain Growth. The volume is divided into nine sections: • Grain growth theory and simulation • Recrystallization theory and simulation • Low carbon and IF steels • High strength steels • Electrical steels • Stainless steels • Aluminum and magnesium alloys • Nickel and nickel based superalloys • Unconventional and advanced materials
Download or read book Proceedings of the International Conference on Microalloying in Steels written by J. M. Rodriguez-Ibabe and published by . This book was released on 1998 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology of microallyoing is now, at the end of the 20th century, widely accepted. This is possibly due to the attractive balance of properties which is achievable with the correct control of the interaction between steel chemistry and processing parameters. Microalloying is applied to a wide range of products and has two main goals: to improve the mechanical properties and to save costs.
Download or read book Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering written by and published by . This book was released on 1999 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
