Download or read book Information Systems for Engineering and Infrastructure Asset Management written by Abrar Haider and published by Springer Science & Business Media. This book was released on 2012-11-08 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​Engineering and infrastructure assets maintain the lifeline of economies. It is, therefore, critical to manage these assets in such a way that they provide a consistent level of service throughout their lifecycle. Management of asset lifecycle, however, is information intensive and utilises a plethora of information systems. The role of theses systems in asset management is much more profound. It extends beyond the organizational boundaries and addresses business relationships with external stakeholders to deliver enhanced level of business outcomes. In doing so information systems are not only required to translate business strategic considerations into action, but are also expected to produce learnings and feedback that informs business strategy and aids in strategic reorientation.

Download or read book Multiple Criteria Decision Methods and Applications written by Günter Fandel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both the 'First International Summer School on Multiple Criteria Decision Making Methods, Applications and Software' and the present volume of readings could only be realised with assistance and support from many sides. We would like to express our gratitude to all those who have contributed to making a success of the first of a hopefully long series of summer schools in this field and to all those who have contribut. ed to the present volume. First of all we are grateful for the financial means supplied by a long list of sponsors, the most important of which are mentioned on the copyright page. Next, we are grateful to the members of the organising committee, Anna Ostanello and Giovanni Zambruno. Since this is the first of what will become a series of summer schools, the chairman of the organising committee, Benedetto Matarazzo, will start this volume with a brief account of the school held in Acireale. The programme committee consisted of Jean Fichefet, Anna Ostanello, Bernard Roy, Jaap Spronk (chairman) and Stanley Zionts. Their valuable contribu tion is gratefully acknowledged, as is the contribution of all the lecturers at the school. Of course, a school is not only made by its teachers, but just as much by its students. The primary aim of a school is to teach and to stimulate the students.

Download or read book E commerce Operations Management 2nd Edition written by Marc J Schniederjans and published by World Scientific Publishing Company. This book was released on 2013-09-20 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition of the book blends in new e-commerce technologies. Mobile commerce (M-commerce) and use of cloud computing are offering a new set of challenges and opportunities for those individuals who know what they are and how they are related to e-commerce. Their use opens up new markets, expanding the need for larger operations, which in turn requires greater knowledge of the operations management subjects presented in this book.The book is focused on issues, concepts, philosophies, procedures, methodologies, and practices of running e-commerce operations. It connects the basic operations management activities undertaken by every organization (e.g., inventory management, scheduling, etc.) and translates their application into issues and problems faced in the field of e-commerce.The book also provides current research findings, strategies, and practices that can help students in the field of operations management run and improve their e-commerce operations. It covers most of the basic operations management activities and functions and has been designed for an upper-level undergraduate business, a graduate business or engineering management course on e-commerce operations management for university students. Students interested in e-commerce operations will find this book a valuable guide to the important aspects of starting up and running an e-commerce operation. They can learn from reading this book how supply chains, products and processes, human resources and purchasing functions can supported and enhanced by the use of e-commerce. In addition, students can learn how to undertake forecasting and scheduling in e-commerce operations. Decision-makers and managers who have to reengineer e-commerce operations can also use this book as a guide to understanding e-commerce.

Download or read book Information Systems Foundations written by Dennis Hart and published by ANU E Press. This book was released on 2010-12-01 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents papers from the fourth biennial Information Systems Foundation Workshop, held at The Australian National University in Canberra from 2¿3 October, 2008. The focus of the workshop was, as for the others in the series, the foundations of Information Systems as an academic discipline. The emphasis in this workshop was on the movement known as 'Design Science' and its importance in practical disciplines such as Information Systems. The chapters in the volume provide a critical examination of current design science ideas, with the role of human creativity given special mention. The philosophical underpinnings of design science thinking are also examined. Practically, the volume shows how the design science approach can be used in academic research that leads to artefacts that add value for individuals, organizations and society.

Download or read book Computational Intelligence in Design and Manufacturing written by Andrew Kusiak and published by John Wiley & Sons. This book was released on 2000-05-22 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Von der Produktidee über den Prototyp und die Modellsimulation bis zur Analyse: Dieser Band hilft Entwicklern und Designern beim Verständnis aller Abläufe im Zuge des Designs neuer Produkte, Prozesse und Systeme. Eine Fülle von Beispielen industrieller Anwendungen, realer Probleme und zugehöriger Lösungen hilft beim Vertiefen und Umsetzen des Stoffes. (05/00)

Download or read book ECIME 2014 Proceedings of the 8th European Conference on IS Management and Evaluation written by Steven de Haes and published by Academic Conferences Limited. This book was released on 2014 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stochastic Processes Optimization and Control Theory Applications in Financial Engineering Queueing Networks and Manufacturing Systems written by Houmin Yan and published by Springer Science & Business Media. This book was released on 2006-09-10 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume contains 16 research articles. It presents recent and pressing issues in stochastic processes, control theory, differential games, optimization, and their applications in finance, manufacturing, queueing networks, and climate control. One of the salient features is that the book is highly multi-disciplinary. The book is dedicated to Professor Suresh Sethi on the occasion of his 60th birthday, in view of his distinguished career.

Download or read book Research and Practical Issues of Enterprise Information Systems II Volume 2 written by Li Xu and published by Springer. This book was released on 2007-12-29 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents work from the IFIP TC 8 WG 8.9 International Conference on the Research and Practical Issues of Enterprise Information Systems (CONFENIS 2007). Enterprise information systems (EIS) have become increasingly popular. EIS integrate and support business processes across functional boundaries in a supply chain environment. In recent years, more and more enterprises world-wide have adopted EIS such as Enterprise Resource Planning (ERP) for running their businesses.

Download or read book Quality Management Competencies in use written by Jason Martin and published by Linköping University Electronic Press. This book was released on 2019-10-21 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality management is an established, widespread and well-researched management concept. Yet, surprisingly little research can be found on understanding the potential for action that is required in order to perform quality management work. The field of quality management has a strong emphasis not only on a customer and supplier focus (external), but also on a process focus (internal). This creates a constant challenge in the way in which quality management is conceived and realised. Another challenge is reflected in current research that describes the need for conceptual change in quality management due to extensive ongoing changes in society and the business environment. The nature and pace of technological development, coupled with changes in social behaviour, continuously bring out new customer needs and new ways for customers to interact with the producers of goods and services. This requires adaptive and innovative approaches for organisations, in order to stay competitive and relevant. This thesis uses competence-based and practice-based perspectives to better understand the requirements placed on quality management in meeting these challenges. It investigates what quality management work is and what properties must exist, in terms of competence and practice, in order to make quality management work possible. The purpose of this thesis is, therefore, to explore how the theoretical perspectives of competence and practice can contribute to an increased understanding of what is required to perform quality management work. Three research questions are posed and answered. The first research question concerns the nature of quality management work and how its key factors may be characterised; the second research question deals with competencies of quality management and how these are interrelated with quality management work; the third research question concerns how the interplay between quality management competencies can be understood. The research questions are answered by interpreting the findings of five papers included in the thesis, using a conceptual framework. The results of the thesis suggest two main directions of quality management work: expansive and adaptive quality management work. Expansive work is characterised by explorative practice, radical change to existing processes or the development of new processes, a logic of development, an orientation towards development and innovation, a striving to increase external efficiency and a striving to increase process variation. Adaptive work is characterised by exploitative practice, incremental change to existing processes, a logic of performance, an orientation towards goals and productivity, a striving towards internal efficiency and a striving to decrease process variation. Quality management competencies relate to quality management work in combining role dependency and discretion. Role dependency signifies the potential and capability to assume multiple role-responsibilities. Discretion is the ‘freedom of movement’ for quality practitioners to engage in practices and choose quality management work directions according to task and situation. The interplay between quality management competencies is understood as the combined effects of two competence antecedents: individual and/or collective dispositions to change and learning. This thesis extends research on quality management by increasing our knowledge and understanding of the requirements needed, not only to select and perform existing quality management practices, but also to adopt and engage in practices where emergence is accommodated by ambidexterity. Kvalitetsutveckling är ett etablerat, utbrett och välbeforskat managementkoncept. Trots detta går det att hitta förvånansvärt lite forskning vilken fokuserar på en ökad förståelse för de handlingsförmågor som faktiskt krävs för att utföra kvalitetsutveckling. Som koncept särskiljer sig kvalitetsutveckling i sitt dubbla fokus på både ett internt, processrelaterat innehåll och ett externt, kundfokuserat innehåll. Detta skapar en konstant utmaning för hur kvalitetsutveckling kan förstås och omsättas i praktiker. En annan utmaning som beskrivs i forskningen är behovet av konceptuell förändring som krävs i kvalitetsutveckling för att möta kunna samhälleliga och marknadsmässiga förändringar. Hastigheten och innehållet i den tekniska utvecklingen samt förändringar i sociala beteenden utvecklar hela tiden nya kundbehov och nya sätt att interagera med leverantörer av varor och tjänster. Detta kräver anpassningsinriktade och innovativa förhållningssätt för organisationer att vara relevanta samt att kunna bibehålla och öka konkurrenskraften. Kompetensteoretiska och praktikteoretiska perspektiv används i avhandlingen för att bättre förstå de krav som kan ställas på modern kvalitetsutveckling i att möta dessa utmaningar. Avhandlingen undersöker vad modern kvalitetsutveckling är och vilka egenskaper som måste finnas, i termer av kompetens och praktik, för att möjliggöra att modern kvalitetsutveckling utförs. Syftet med denna avhandling är således att utforska hur kompetensteoretiska och praktikteoretiska perspektiv kan bidra till en ökad förståelse för vad som krävs för att utföra kvalitetsutvecklingsarbete. Tre olika forskningsfrågor behandlas. Den första forskningsfrågan handlar om vad kvalitetsutvecklingsarbete är och hur det kan karaktäriseras i termer av nyckelfaktorer. Den andra forskningsfrågan berör kompetenser för kvalitetsutveckling och hur dessa kan kopplas till arbete med kvalitetsutveckling. Den tredje forskningsfrågan handlar om hur samspelet mellan kompetenser för kvalitetsutvecklingsarbete kan förstås. Forskningsfrågorna besvaras genom att tolka de empiriska resultaten i fem bilagda artiklar utifrån ett konceptuellt ramverk. Avhandlingens resultat visar på två huvudsakliga inriktningar på innehållet i kvalitetsutvecklingsarbete: expansivt och adaptivt kvalitetsutvecklingsarbete. Nyckelfaktorer i expansivt arbete är “explorative” praktik, radikal förändring av existerande processer eller utveckling av nya processer, utvecklingslogik, utvecklings- och innovationsorientering, extern effektivitet samt ökning av processvariation. Nyckelfaktorer i adaptivt arbete är “exploitative” praktik, inkrementell förändring i existerande processer, prestationslogik, mål och produktivitets-orientering, intern effektivitet samt att minska och styra processvariation. Kopplingen mellan kompetenser för och arbetet med praktiker i kvalitetsutveckling utgörs av en potential för rollberoende och handlingsfrihet. Rollberoende beskriver en individuell och/eller kollektiv kapacitet att kunna tillägna sig samt byta mellan olika definierade rollansvar. Handlingsfrihet beskriver kapaciteten att kunna välja inriktning på innehållet i arbetet beroende på uppgift och situation. Samspelet mellan kompetenser för kvalitetsutvecklingsarbete kan beskrivas som den samlade effekten av två förutsättningar (eng. antecedent) för kompetens: individuell och/eller kollektiv benägenhet för förändring och lärande. Avhandlingens resultat bidrar till forskningen om kvalitetsutveckling på två huvudsakliga sätt. Dels genom att öka kunskap och förståelse för de krav som ställs på att välja och prestera existerande kvalitetsutvecklingspraktiker. Dels genom att öka förståelsen om hur anpassning och utövande av dessa praktiker går till där framväxandet av praktiker stimuleras genom att möjliggöra organisatorisk ambidextri.

Download or read book Information Management in Computer Integrated Manufacturing written by Heimo H. Adelsberger and published by Springer Science & Business Media. This book was released on 1995-08-21 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a modern and attractive approach to computer integrated manufacturing (CIM) by stressing the crucial role of information management aspects. The 31 contributions contained constitute the final report on the EC Project TEMPUS No. 2609 aimed at establishing a new curriculum and regular education in the new field of information management in CIM at European universities. Much attention was paid to the style of writing and coverage of the important issues. Thus the book is particularly suited as a text for students and young scientists approaching CIM from different directions; at the same time, it is a comprehensive guide for industrial engineers in machine engineering, computer science, control engineering, artificial intelligence, production management, etc.

Download or read book Software Applications Concepts Methodologies Tools and Applications written by Tiako, Pierre F. and published by IGI Global. This book was released on 2009-03-31 with total page 3994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes articles in topic areas such as autonomic computing, operating system architectures, and open source software technologies and applications.

Download or read book Transdisciplinary Engineering Crossing Boundaries written by M. Borsato and published by IOS Press. This book was released on 2016-10-13 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Concurrent Engineering (CE) approach was developed in the 1980s, based on the concept that different phases of a product life cycle should be conducted concurrently and initiated as early as possible within the Product Creation Process (PCP). CE concepts have matured and become the foundation of many new ideas, methodologies, initiatives, approaches and tools. This book contains the proceedings from the 23rd ISPE Inc. International Conference on Transdisciplinary (formerly: Concurrent) Engineering, held in Curitiba, Parana, Brazil, in October 2016. The conference, entitled 'Transdisciplinary Engineering: Crossing Boundaries', provides an important forum for international scientific exchange on Concurrent Engineering and collaborative enterprises, and attracts the participation of researchers, industry experts and students, as well as government representatives. The 108 peer reviewed papers and keynote speech included here, range from theoretical and conceptual to strongly pragmatic works, which are organized into 17 sections including: Concurrent Engineering and knowledge exchange; engineering for sustainability; multidisciplinary project management; collaborative design and engineering; optimization of engineering operations and data analytics; and multidisciplinary design optimization, among others. The book gives an overview of the latest research, advancements and applications in the field and will be of interest to researchers, design practitioners and educators.

Download or read book Enterprise Information Systems and Implementing IT Infrastructures Challenges and Issues written by Parthasarathy, S. and published by IGI Global. This book was released on 2010-03-31 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book aims at identifying potential research problems and issues in the EIS such as Enterprise Resource Planning (ERP), Supply Chain Management (SCM), and Customer Relationship Management (CRM)"--Provided by publisher.

Download or read book ECKM 2012 Proceedings of the 13th European Conference on Knowledge Management written by Juan Gabriel Cegarra and published by Academic Conferences Limited. This book was released on 2012 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ECKM 2015 Proceedings of the 16th European Conference on Knowledge Management written by Juan Gabriel Cegarra and published by Academic Conferences Limited. This book was released on 2012 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the XV International Scientific Conference on Industrial Systems IS 11 written by and published by FON. This book was released on with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Project Leadership and Team Building in Global Project Management written by Pranav Bhola and published by Partridge Publishing. This book was released on 2017-01-20 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering businesses today run through projects. Projects are successful when we have effective project leadership, which builds effective teams and teams. All these attributes increase the performance of the organization and enable it to achieve competitive advantage. Project management is the need of today’s businesses for acquiring business development and attaining business performance in local as well as in global markets as business performance is driven by competitive advantage, which is possible through successful project management. Development of new products and other competitive products and services is done through the implementation of projects. Projects are deployed for process improvements, which further add to the profitability and growth of the business. This book discusses the aspects of project management processes, project leadership, and team building in context to project management together, which improves business performance.