Download or read book Proceedings of the 2nd International Conference on Developments in Valves and Actuators for Fluid Control written by Peter Wood and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The flow of two-phase mixtures through restrictions. is a complex phenomenon that to date has not been fully described analytically. It is an area that received a geat deal of attention because of its application to nuclear reactor technology. The majority of the work done in this area considered ideal geometries such as nozzles, orifices and straight pipes. In the area of control valves very little work has been done. Brockett & King [1] studied subcooled water. Stiles [2] looked at subcooled freon. Martinec [4] compared subcooled freon in valves with ideal geometries. Sheldon & Schuder [3) looked experimentally at airjwater mixtures through valves that resulted in a sizing procedure. Fagerlund [10] presented an analytical model that required use of the Sheldon & Schuder data to establish the behavior of valves as opposed to more ideal geometries. However, the data used was limited to a single valve travel. Fagerlund & Storer [11] have expanded this to include several valve travels that further generalizes the technique. It is the intent of this paper to summarize a practical approach to s1z1ng valves for two-phase service that may be reduced to either a graphical or calculator procedure. Discussion of Analysis A fundamental assumption in this method is that the quality remains constant between the inlet and the vena contracta. For gas-liquid flows it is obvious providing vaporization does not occur.
Download or read book Instrument Engineers Handbook Volume Two written by Bela G. Liptak and published by CRC Press. This book was released on 2018-10-08 with total page 2460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest update to Bela Liptak's acclaimed "bible" of instrument engineering is now available. Retaining the format that made the previous editions bestsellers in their own right, the fourth edition of Process Control and Optimization continues the tradition of providing quick and easy access to highly practical information. The authors are practicing engineers, not theoretical people from academia, and their from-the-trenches advice has been repeatedly tested in real-life applications. Expanded coverage includes descriptions of overseas manufacturer's products and concepts, model-based optimization in control theory, new major inventions and innovations in control valves, and a full chapter devoted to safety. With more than 2000 graphs, figures, and tables, this all-inclusive encyclopedic volume replaces an entire library with one authoritative reference. The fourth edition brings the content of the previous editions completely up to date, incorporates the developments of the last decade, and broadens the horizons of the work from an American to a global perspective. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.
Download or read book Future Energy Conferences and Symposia written by and published by . This book was released on 1990 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Valves and Actuators for Fluid Control written by D. R. Airey and published by . This book was released on 1990 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Chemical Processing Online written by Sunggyu Lee and published by CRC Press. This book was released on 2005-11-01 with total page 3338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition Encyclopedia supplies nearly 350 gold standard articles on the methods, practices, products, and standards influencing the chemical industries. It offers expertly written articles on technologies at the forefront of the field to maximize and enhance the research and production phases of current and emerging chemical manufacturing practices and techniques. This collecting of information is of vital interest to chemical, polymer, electrical, mechanical, and civil engineers, as well as chemists and chemical researchers. A complete reconceptualization of the classic reference series the Encyclopedia of Chemical Processing and Design, whose first volume published in 1976, this resource offers extensive A-Z treatment of the subject in five simultaneously published volumes, with comprehensive indexing of all five volumes in the back matter of each tome. It includes material on the design of key unit operations involved with chemical processes; the design, unit operation, and integration of reactors and separation systems; process system peripherals such as pumps, valves, and controllers; analytical techniques and equipment; and pilot plant design and scale-up criteria. This reference contains well-researched sections on automation, equipment, design and simulation, reliability and maintenance, separations technologies, and energy and environmental issues. Authoritative contributions cover chemical processing equipment, engineered systems, and laboratory apparatus currently utilized in the field. It also presents expert overviews on key engineering science topics in property predictions, measurements and analysis, novel materials and devices, and emerging chemical fields. ALSO AVAILABLE ONLINE This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for both researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book Encyclopedia of Chemical Processing written by Sunggyu Lee and published by Taylor & Francis US. This book was released on 2006 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supplying nearly 350 expertly-written articles on technologies that can maximize and enhance the research and production phases of current and emerging chemical manufacturing practices and techniques, this second edition provides gold standard articles on the methods, practices, products, and standards recently influencing the chemical industries. New material includes: design of key unit operations involved with chemical processes; design, unit operation, and integration of reactors and separation systems; process system peripherals such as pumps, valves, and controllers; analytical techniques and equipment; current industry practices; and pilot plant design and scale-up criteria.
Download or read book The Third International Conference on the Development of Biomedical Engineering in Vietnam written by Vo Van Toi and published by Springer Science & Business Media. This book was released on 2010-04-03 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vietnam is a rapidly developing, socially dynamic country, where interest in biomedical engineering activities has grown considerably in recent years. The leadership of the Vietnamese government, and of research and educational institutions, are well aware of the importance of this field for the development of the country and have instituted policies to promote its development. The political, economic and social environment within the country offers unique opportunities for the international community and this conference was intended to provide a vehicle for the sharing of experiences; development of support and collaboration networks for research; and exchange of ideas on how to improve the educational and entrepreneurial environment to better address the urgent needs of Vietnam. In January 2004, under the sponsorship of the U.S. National Science Foundation, a U.S. delegation that consisted of Biomedical Engineering professors from different universities in the United States, visited several universities and research institutions in Vietnam to assess the state of development of this field. This delegation proposed a five year plan that was enthusiastically embraced by the international scientific communities to actively develop collaborations with Vietnam. Within this framework, in July 2005, the First International Conference on the Development of Biomedical Engineering in Vietnam was held in Ho Chi Minh City. From that conference a Consortium of Vietnam-International Universities was created to advise and assist the development of Biomedical Engineering in Vietnamese universities.
Download or read book Instrument Engineers Handbook Volume 2 Third Edition written by Bela G. Liptak and published by CRC Press. This book was released on 1995-05-15 with total page 1594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of the Instrument Engineers' Handbook-most complete and respected work on process instrumentation and control-helps you:
Download or read book The British National Bibliography written by Arthur James Wells and published by . This book was released on 1979 with total page 1706 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Control written by Béla G. Lipták and published by Butterworth-Heinemann. This book was released on 2013-10-02 with total page 1580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrument Engineers' Handbook, Third Edition: Process Control provides information pertinent to control hardware, including transmitters, controllers, control valves, displays, and computer systems. This book presents the control theory and shows how the unit processes of distillation and chemical reaction should be controlled. Organized into eight chapters, this edition begins with an overview of the method needed for the state-of-the-art practice of process control. This text then examines the relative merits of digital and analog displays and computers. Other chapters consider the basic industrial annunciators and other alarm systems, which consist of multiple individual alarm points that are connected to a trouble contact, a logic module, and a visual indicator. This book discusses as well the data loggers available for process control applications. The final chapter deals with the various pump control systems, the features and designs of variable-speed drives, and the metering pumps. This book is a valuable resource for engineers.
Download or read book Proceedings of the 2013 International Conference on Advances in Construction Machinery and Vehicle Engineering written by Zheng Huiqiang and published by DEStech Publications, Inc. This book was released on 2013-11-01 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: the 10th anniversary of Chinese Journal of Construction Machinery. In order to celebrate the 20th anniversary of the association and the 10th anniversary of the journal, we will hold the following activities this year. 1. Continue to convene the fourth International Conference Symposium of 2013 on Construction Machinery and Vehicle Engineering Research Progress. 2. Continue to convene the fifth National Mechanical Engineering Doctoral Forum. This forum will be held in Xuzhou and the time is from August 20 to August 24 in 2013. 3. The highlevel expert forum will be held during Changsha Engineering Machinery Parts Expo. A dialogue will be taken on the issues of industry scientific innovation, accessories, testing and quality among universities, research institutes and enterprises. 4. The celebrations about the 20th anniversary of the association and the 10th anniversary of the journal will be conducted in Shanghai. The coun cil of the new editorial board and the executive director is convened for summing up the work of the association since it was founded 20 years ago and the work of the journal since it was founded 10 years ago, and planning for the future development. This International Conference is held in the circumstance of international economic crisis and domestic industrial structure adjustment. In the past year, sales market of construction machinery has been subjected to a certain shocks, and the enterprises have en countered a certain difficulties. For the future, however, I believe that such difficulties are temporary, and the prospect is bright. The construction machinery is to serve the mining and state infrastructure construction, and for China, along with most c ountries in the world which are developing countries, the infrastructure construction is still a significant part in the course of development, and the sound infrastructure will promote the development of their economies, even these countries which are in the leading position in economy development also attach great importance to the improvement of infrastructure. Therefore, construction machinery is indispensable and has a rigid demand. Currently, the international competition has not been only limited to terrestrial, since the possession of terrestrial was a foregone conclusion, but there will be more
Download or read book Proceedings of the ASME JSME Joint Fluids Engineering Conference written by and published by . This book was released on 2003 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Field Exploration and Development Conference 2019 written by Jia'en Lin and published by Springer Nature. This book was released on 2020-07-11 with total page 3907 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers from the 8th International Field Exploration and Development Conference (IFEDC 2019) and addresses a broad range of topics, including: Low Permeability Reservoir, Unconventional Tight & Shale Oil Reservoir, Unconventional Heavy Oil and Coal Bed Gas, Digital and Intelligent Oilfield, Reservoir Dynamic Analysis, Oil and Gas Reservoir Surveillance and Management, Oil and Gas Reservoir Evaluation and Modeling, Drilling and Production Operation, Enhancement of Recovery, Oil and Gas Reservoir Exploration. The conference not only provided a platform to exchange experiences, but also promoted the advancement of scientific research in oil & gas exploration and production. The book is chiefly intended for industry experts, professors, researchers, senior engineers, and enterprise managers.
Download or read book Smart Flow Control Processes in Micro Scale Volume 2 written by Bengt Sunden and published by MDPI. This book was released on 2020-12-29 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, microfluidic devices with a large surface-to-volume ratio have witnessed rapid development, allowing them to be successfully utilized in many engineering applications. A smart control process has been proposed for many years, while many new innovations and enabling technologies have been developed for smart flow control, especially concerning “smart flow control” at the microscale. This Special Issue aims to highlight the current research trends related to this topic, presenting a collection of 33 papers from leading scholars in this field. Among these include studies and demonstrations of flow characteristics in pumps or valves as well as dynamic performance in roiling mill systems or jet systems to the optimal design of special components in smart control systems.
Download or read book Proceedings of the 3rd International Conference on Intelligent Technologies and Engineering Systems ICITES2014 written by Jengnan Juang and published by Springer. This book was released on 2015-11-12 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the original, peer reviewed research from the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES2014), held in December, 2014 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: Automation and robotics, fiber optics and laser technologies, network and communication systems, micro and nano technologies and solar and power systems. This book also Explores emerging technologies and their application in a broad range of engineering disciplines Examines fiber optics and laser technologies Covers biomedical, electrical, industrial and mechanical systems Discusses multimedia systems and applications, computer vision and image & video signal processing
Download or read book Bibliographic Guide to Conference Publications written by New York Public Library. Research Libraries and published by . This book was released on 1989 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1975- include publications cataloged by the Research Libraries of the New York Public Library with additional entries from the Library of Congress MARC tapes.
Download or read book Index of Conference Proceedings Received written by British Library. Document Supply Centre and published by . This book was released on 1987 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
