Download or read book International Conference Fundamentals of Laser Assisted Micro and Nanotechnologies FLAMN 07 written by and published by . This book was released on 2007 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Conference Fundamentals of Laser Assisted Micro Nanotechnologies FLAMN 07 Workshop Laser Cleaning and Artworks Conservation LCAC St Petersburg Russia 25 28 June 2007 Abstracts written by and published by . This book was released on 2007 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Final Proceedings for Fundamentals of Laser Assisted Micro & Nanotechnologies, 25 June 2007 - 28 June 2007. Physical fundamentals of laser based microtechnologies, modelling and quantitative analysis. Precision laser microshaping: cutting, drilling etc. Local laser modification of different materials composition and properties. Laser surface microstructuring. Laser melting, welding and soldering of microcomponents including plastics. Pulsed laser deposition including LIFT. Laser based methods of photonics components fabrication. Laser cleaning of the surface. Artworks conservation by laser. Laser nanoengineering. Laser processing of microelectronics components. Laser technology for MEMS, biosensors, biocompatible materials, medical tools and fluidic devices. Mechanisms of laser heating, structural and phase transitions in condensed matter. Nonlinear optical effects in matter under intensive laser irradiation. Physical mechanisms of laser damage of optical materials and elements. Laser induced surface phenomena. Laser-matter interaction in the near-field optics. Mechanisms and regularities of laser ablation. Instabilities and self organization processes under laser conditioning. Interaction of ultra short laser pulses with a matter. Laser interaction with bio-tissues. Plasma ignition in gases, liquids and solids.
Download or read book Fundamentals of Laser Assisted Micro and Nanotechnologies written by Vadim P. Veiko and published by Springer. This book was released on 2014-05-19 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the state of the art of laser micro- and nanotechnology. The physical fundamentals of different processes and the application are presented. The book deals with different materials like phase change and memory alloys, thin films, polymers etc. New phenomena and mechanisms of laser-matter interaction in nano-domains are explained. This book is helpful for students, postgraduates, engineers and researches working not only in the field of laser microtechnology but also in high-tech industry, like photonics, microelectronics, information technology.
Download or read book International Conference on Lasers Applications and Technologies 2007 written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Physics written by and published by . This book was released on 2008 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fiber Fuse written by Shin-ichi Todoroki and published by Springer. This book was released on 2014-05-22 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fiber fuse phenomenon that causes a serious problem for the present optical communication systems. High-power light often brings about catastrophic damage to optical devices. Silica glass optical fibers with ultralow transmission loss are not the exception. A fiber fuse appears in a heated region of the fiber cable delivering a few watts of light and runs toward the light source destroying its core region. Understanding this phenomenon is a necessary first step in the development of future optical communication systems. This book provides supplementary videos and photographs to help understand what occurs in the fiber, including the classification of its propagation mode and self-pumping effect. These findings are good references for other optical devices exposed to ultrahigh-power light such as laser emitters.
Download or read book Handbook of Laser Micro and Nano Engineering written by Koji Sugioka and published by Springer. This book was released on 2021-11-13 with total page 2071 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.
Download or read book International Conference on Lasers Applications and Technologies 2005 written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Microfabrication and Nanotechnology Three Volume Set written by Marc J. Madou and published by CRC Press. This book was released on 2018-12-14 with total page 1992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, Fundamentals of Microfabrication and Nanotechnology continues to provide the most complete MEMS coverage available. Thoroughly revised and updated the new edition of this perennial bestseller has been expanded to three volumes, reflecting the substantial growth of this field. It includes a wealth of theoretical and practical information on nanotechnology and NEMS and offers background and comprehensive information on materials, processes, and manufacturing options. The first volume offers a rigorous theoretical treatment of micro- and nanosciences, and includes sections on solid-state physics, quantum mechanics, crystallography, and fluidics. The second volume presents a very large set of manufacturing techniques for micro- and nanofabrication and covers different forms of lithography, material removal processes, and additive technologies. The third volume focuses on manufacturing techniques and applications of Bio-MEMS and Bio-NEMS. Illustrated in color throughout, this seminal work is a cogent instructional text, providing classroom and self-learners with worked-out examples and end-of-chapter problems. The author characterizes and defines major research areas and illustrates them with examples pulled from the most recent literature and from his own work.
Download or read book Micro and Nanomanufacturing Volume II written by Mark J. Jackson and published by Springer. This book was released on 2017-10-28 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive treatment of micro and nanofabrication techniques, and applies established and research laboratory manufacturing techniques to a wide variety of materials. It is a companion volume to “Micro and Nanomanufacturing” (2007) and covers new topics such as aligned nanowire growth, molecular dynamics simulation of nanomaterials, atomic force microscopy for microbial cell surfaces, 3D printing of pharmaceuticals, microvascular coaptation methods, and more. The chapters also cover a wide variety of applications in areas such as surgery, auto components, living cell detection, dentistry, nanoparticles in medicine, and aerospace components. This is an ideal text for professionals working in the field, and for graduate students in micro and nanomanufacturing courses.
Download or read book Microfabrication and Nanomanufacturing written by Mark J. Jackson and published by CRC Press. This book was released on 2005-11-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology, seen as the next leap forward in the industrial revolution, requires that manufacturers develop processes that revolutionize the way small products are made. Microfabrication and Nanomanufacturing focuses on the technology of fabrication and manufacturing of engineering materials at these levels. The book provides an overview of techniques used in the semiconductor industry. It also discusses scaling and manufacturing processes operating at the nanoscale for non-semiconductor applications; the construction of nanoscale components using established lithographic techniques; bulk and surface micromachining techniques used for etching, machining, and molding procedures; and manufacturing techniques such as injection molding and hot embossing. This authoritative compilation describes non-traditional micro and nanoscale processing that uses a newly developed technique called pulsed water jet machining as well as the efficient removal of materials using optical energy. Additional chapters focus on the development of nanoscale processes for producing products other than semiconductors; the use of abrasive particles embedded in porous tools; and the deposition and application of nanocrystalline diamond. Economic factors are also presented and concern the promotion and commercialization of micro and nanoscale products and how demand will eventually drive the market.
Download or read book Manufacturing Techniques for Microfabrication and Nanotechnology written by Marc J. Madou and published by CRC Press. This book was released on 2011-06-13 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for science and engineering students, this text focuses on emerging trends in processes for fabricating MEMS and NEMS devices. The book reviews different forms of lithography, subtractive material removal processes, and additive technologies. Both top-down and bottom-up fabrication processes are exhaustively covered and the merits of the different approaches are compared. Students can use this color volume as a guide to help establish the appropriate fabrication technique for any type of micro- or nano-machine.
Download or read book Nanotechnology Characterization Tools for Tissue Engineering and Medical Therapy written by Challa S.S.R. Kumar and published by Springer Nature. This book was released on 2019-11-22 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ninth volume of a 40 volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Nanotechnology Characterization Tools for Tissue Engineering and Medical Therapy. Modern applications and state-of-the-art techniques are covered and make this volume an essential reading for research scientists in academia and industry.
Download or read book Understanding Smart Sensors written by Randy Frank and published by Artech House Publishers. This book was released on 1996 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Two of the most important trends in sensor development in recent years have been advances in micromachined sensing elements of all kinds, and the increase in intelligence applied at the sensor level. This book addresses both, and provides a good overview of current technology". -- I&CS
Download or read book Recent Trends in Manufacturing and Materials Towards Industry 4 0 written by Muhammed Nafis Osman Zahid and published by Springer Nature. This book was released on 2021-03-22 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents part of the proceedings of the Manufacturing and Materials track of the iM3F 2020 conference held in Malaysia. This collection of articles deliberates on the key challenges and trends related to manufacturing as well as materials engineering and technology in setting the stage for the world in embracing the fourth industrial revolution. It presents recent findings with regards to manufacturing and materials that are pertinent towards the realizations and ultimately the embodiment of Industry 4.0, with contributions from both industry and academia.
Download or read book Food Hydrocolloids written by K. Nishinari and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is now well recognised that the texture of foods is an important factor when consumers select particular foods. Food hydrocolloids have been widely used for controlling in various food products their viscoelasticity, emulsification, gelation, dispersion, thickening and many other functions. An international journal, FOOD HYDROCOLLOIDS, launched in 1986 has published a number of stimulating papers, and established an active forum for promoting the interaction between academics and industrialists and for combining basic scientific research with industrial development. Although there have been various research groups in many food processing areas in Japan, such as fish paste (kamaboko, surimi), soybean curd (tofu), agar jelly dessert, kuzu starch jelly, kimizu (Japanese style mayonnaise), their activities have been conducted in isolation of one another. The interaction between the various research groups operating in the various sectors has been weak. Symposia on food hydrocolloids have been organised on several occasions in Japan since 1985. Professor Glyn O. Phillips, the Chief Executive Editor of FOOD HYDROCOLLOIDS, suggested to us that we should organise an international conference on food hydrocolloids. We discussed it on many occasions, and eventually decided to organise such a meeting, and extended the scope to include recent development in proteinaceous hydrocolloids, and their nutritional aspects, in addition to polysaccharides and emulsions.
Download or read book Aerosol Science and Technology written by David S. Ensor and published by RTI Press. This book was released on 2011-10-06 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerosol Science and Technology: History and Reviews captures an exciting slice of history in the evolution of aerosol science. It presents in-depth biographies of four leading international aerosol researchers and highlights pivotal research institutions in New York, Minnesota, and Austria. One collection of chapters reflects on the legacy of the Pasadena smog experiment, while another presents a fascinating overview of military applications and nuclear aerosols. Finally, prominent researchers offer detailed reviews of aerosol measurement, processes, experiments, and technology that changed the face of aerosol science. This volume is the third in a series and is supported by the American Association for Aerosol Research (AAAR) History Working Group, whose goal is to produce archival books from its symposiums on the history of aerosol science to ensure a lasting record. It is based on papers presented at the Third Aerosol History Symposium on September 8 and 9, 2006, in St. Paul, Minnesota, USA.
