Download or read book Commercial Design Using Autodesk Revit Architecture 2013 written by Daniel John Stine and published by SDC Publications. This book was released on 2012 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Commercial Design Using Revit Architecture 2013 is designed for the architectural student using Revit Architecture 2013. The intent is to provide the student with a well-rounded knowledge of tools and techniques for use in both school and industry. This text takes a project based approach to learning Revit Architecture in which the student develops a three story office building. Each book comes with a DVD containing numerous video presentations of the written material. General building codes and industry standard conventions are covered in a way that is applicable to the current exercise. The first two chapters are intended to get the reader familiar with the user interface and many of the common menus and tools of Revit Architecture 2013. A small office is created in chapter two to show just how easy it is to get started using Revit Architecture. By the end of chapter two the student will be excited and prepared to take on a much larger project. Throughout the rest of the book the student develops a three story office building. The drawings start with the floor plans and develop all the way to photo-realistic renderings like the one on the cover of this book. In these chapters the many tools and features of Revit Architecture 2013 are covered in greater detail.

Download or read book Residential Design Using Autodesk Revit 2019 written by Daniel John Stine and published by SDC Publications. This book was released on 2018-04-11 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residential Design Using Autodesk Revit 2019 is designed for users completely new to Autodesk Revit. This text takes a project based approach to learning Autodesk Revit’s architectural tools in which you develop a single family residence all the way to photorealistic renderings like the one on the cover. Each book also includes access to extensive video training designed to further help you master Autodesk Revit. The lessons begin with a basic introduction to Autodesk Revit 2019. The first four chapters are intended to get you familiar with the user interface and many of the common menus and tools. Throughout the rest of the book a residential building is created and most of Autodesk Revit’s tools and features are covered in greater detail. Using step-by-step tutorial lessons, the residential project is followed through to create elevations, sections, floor plans, renderings, construction sets, etc.

Download or read book Architectural Commercial Design Using Autodesk Revit 2014 written by Daniel John Stine and published by SDC Publications. This book was released on 2013 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Architectural Commercial Design Using Revit 2014 is designed for the architectural student using Revit 2014. The intent is to provide the student with a well-rounded knowledge of tools and techniques for use in both school and industry. This text takes a project based approach to learning Revit's Architectural tools in which the student develops a three story office building. Each book comes with a CD containing numerous video presentations of the written material. General building codes and industry standard conventions are covered in a way that is applicable to the current exercise. The first two chapters are intended to get the reader familiar with the user interface and many of the common menus and tools of Revit 2014. A small office is created in chapter two to show just how easy it is to get started using Revit. By the end of chapter two the student will be excited and prepared to take on a much larger project. Throughout the rest of the book the student develops a three story office building. The drawings start with the floor plans and develop all the way to photo-realistic renderings like the one on the cover of this book. In these chapters many of the architectural tools and features of Revit 2014 are covered in greater detail.

Download or read book Autodesk Revit Architecture 2012 written by Eric Wing and published by John Wiley & Sons. This book was released on 2011-06-03 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Autodesk Official Training Guide teaches Revit to new users The perfect introduction to Revit Architecture, Autodesk?s building information modeling (BIM) software, this unique and highly effective guide uses a continuous, step-by-step tutorial to build your skills. You?ll first get to know the Revit interface and basic conventions, then quickly move right into designing, documenting, and modeling a four-story office building. Place walls, windows, and doors; add floors ceilings, railings, and stairs; create construction documentation?and that?s just for starters! You?ll be amazed by how rapidly you can progress. Teaches you how to use Autodesk Revit Architecture, Autodesk?s industry-leading building information modeling (BIM) software Uses a continuous, step-by-step tutorial that progresses through the book, teaching you how to design, document, and present a four-story building Covers structural grids, beams, and foundations; adding text and dimensions; building floors layer by layer; joining exterior and interior walls; creating roofs and ceilings; and much more Introduces embedded families and formulas, crucial site considerations, and importing and exporting to various formats Includes a Web site with before-and-after tutorial files so readers can compare their work Best of all, this guide is self-paced. Follow the tutorial sequentially?or jump into just the chapters you want by downloading the project files from the companion Web site.

Download or read book Interior Design Using Autodesk Revit 2022 written by Daniel John Stine and published by SDC Publications. This book was released on 2021-06 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intent of this book is to provide the interior design student a well-rounded knowledge of Autodesk Revit tools and techniques. These skills can then be applied to enhance professional development in both academia and industry. Each book also includes access to nearly 100 video tutorials designed to further help you master Autodesk Revit. The overall premise of the book is to help you learn Revit while developing the interior of a two story law office. At the start of the book you are provided an architectural model with established columns, beams, exterior walls, minimal interior walls and roofs in which to work. This allows more emphasis to be placed on interior design rather than primary architectural elements. The chapters' chronology generally follows the typical design process. You will find this book helps you more accurately and efficiently develop your design ideas and skills. The first chapter introduces you to Revit, Building Information Modeling (BIM) and the basics of opening, saving and creating a new project. The second provides a quick introduction to modeling basic elements in Revit including walls, doors, windows and more. This chapter is designed to show you how powerful Revit truly is and to get you excited for the rest of the book. The remainder of the book is spent developing the interior space of the law office with an established space program. You will learn how to view and navigate within the provided 3D architectural model, manage and create materials and develop spaces with walls, doors and windows. Once all the spaces are added to the model, several areas are explored and used as the basis to cover Revit commands and workflows. At the end of this tutorial, you will be able to model floor finishes, ceilings with soffits, casework, custom reception desk, restrooms, furniture and light fixtures. Additional features such as tags, schedules and photorealistic rendering will be covered. About the Videos Access to nearly 100 videos, almost five hours of content, are also included with your purchase of this book. These videos break down each topic into several short videos so that you can easily navigate to a specific aspect of a tool or feature in Autodesk Revit. This makes the videos both a powerful learning tool and convenient video reference. The videos make it easy to see the menu selections and will make learning Revit straightforward and simple. It's like having the author by your side showing you exactly how to use all the major tools in Autodesk Revit.

Download or read book Revit Architecture 2017 Basics written by Elise Moss and published by SDC Publications. This book was released on 2016 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autodesk Revit 2017 Basics for Architectural Design is geared towards beginning architectural students or professional architects who want to get a jump-start into 3D parametric modeling for commercial structures. This book is filled with tutorials, tips and tricks, and will help you get the most out of your software in very little time. The text walks you through from concepts to site plans to floor plans and on through reflected ceiling plans, then ends with an easy chapter on how to customize Autodesk Revit to boost your productivity. The advantages of working in 3D are not initially apparent to most architectural users. The benefits come when you start creating your documentation and you realize that your views are automatically defined for you with your 3D model. Your schedules and views automatically update when you change features. You can explore your conceptual designs faster and in more depth. Learning to use Autodesk Revit will not make you a better architect. However, it will allow you to communicate your ideas and designs faster, easier, and more beautifully.

Download or read book Photoshop for Interior Designers written by Suining Ding and published by Bloomsbury Publishing USA. This book was released on 2013-10-31 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoshop for Interior Designers introduces step-by-step techniques for interior designers to successfully use Adobe Photoshop to visually communicate their design concept through graphic images and to illustrate design ideas through a visual thinking process. Instructions show how to integrate hand drawings and freehand sketches into digital drawings. Basic and advanced techniques presented include creating floor plans and elevations, preparing perspectives or isometric drawings, and applying materials, lightings, background and entourages for interior design presentations. Taking a multi-media approach, the text demonstrates how to use Photoshop to refine and modify drawings created in Google Sketchup, AutoCAD and other 3D software programs, and introduces how to use InDesign to seamlessly create graphic layouts for presentation to clients. Editable digital files for students to use to complete the projects at the end of chapters are on the book's companion website located at http://www.bloomsbury.com/us/photoshop-for-interior-designers-9781609015442/. They can also be found at https://www.fairchildbooks.com/studio-resources.

Download or read book Design Integration Using Autodesk Revit 2016 written by Daniel John Stine and published by SDC Publications. This book was released on 2015-05 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design Integration Using Autodesk Revit 2016 is designed to provide you with a well-rounded knowledge of Autodesk Revit tools and techniques. All three flavors of the Revit platform are introduced in this textbook. This approach gives you a broad overview of the Building Information Modeling (BIM) process. The topics cover the design integration of most of the building disciplines: Architectural, Interior Design, Structural, Mechanical, Plumbing and Electrical. Civil is not covered, but adding topography to your model is. Each book comes with a disc containing numerous video presentations of the written material as well as bonus chapters. Throughout the book you develop a two story law office. The drawings start with the floor plans and develop all the way to photo-realistic renderings similar to the one on the cover of this book. Along the way the building’s structure, ductwork, plumbing and electrical (power and lighting) are modeled. By the end, you will have a thorough knowledge of many of the Revit basics needed to be productive in a classroom or office environment. Even if you will only be working with one component of Revit in your chosen profession, this book will give you important knowledge on how the other disciplines will be doing their work and valuable insight into the overall process. The first four chapters cover many of the Revit basics needed to successfully and efficiently work with the software. Once the fundamentals are covered, the remaining chapters walk you through a building project which is started from scratch so nothing is taken for granted by you or the author.

Download or read book Autodesk AutoCAD 2014 Fundamentals written by Elise Moss and published by SDC Publications. This book was released on 2013 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autodesk AutoCAD 2014 Fundamentals is designed to be used during instructor led training in an eight week course. It is an introductory level textbook intended for new AutoCAD 2014 users. This book covers all the fundamental skills necessary for effectively using AutoCAD and will provide a strong foundation for advancement. This textbook applies the use of AutoCAD as it pertains to mechanical drafting. Knowing how to draw a line in AutoCAD is not the same as understanding which line type is required when creating technical drawings. This text not only provides the necessary information to operate AutoCAD 2014 but also provides the skills to use AutoCAD as a tool to work proficiently as a drafter or designer.

Download or read book Materials for Interior Environments written by Corky Binggeli and published by John Wiley & Sons. This book was released on 2013-08-26 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organized by types of materials and applications, this guide helps designers successfully address material evaluation and selection of interior components. Engagingly written, highly detailed, and helpfully illustrated with more than 550 color illustrations, Materials for Interior Environments is a comprehensive guide to everything a designer needs to know about the materials available for interiors—from aesthetic qualities to manufacturing and fabrication, applications, installation and maintenance, and specifications for materials used in commercial and residential applications.

Download or read book Autocad 2009 for Interior Design written by Zane D. Curry and published by Prentice Hall. This book was released on 2009 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'AutoCAD 2009 for Interior Design' provides students with the necessary experience and practice to produce and illustrate complex 3D interior components and furnished spaces in an amount of time that will allow additional studio projects to be completed in the course of one semester.

Download or read book Autodesk Revit 2017 Architectural Command Reference written by Daniel John Stine and published by SDC Publications. This book was released on 2017-02 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides you with an easy to use reference for all of Autodesk Revit’s Architectural Commands. This command reference can be used as you are working in the software to help you understand what each command does and how it may be used in your overall workflow. Also included with this book are nearly 100 videos tutorials which will further help you master Autodesk Revit. The book is organized in the same way the Revit user interface is presented. Each tab of the Ribbon is represented as a chapter in the book. Within the chapter each button is represented in the book as it appears on the Ribbon from left to right. Organizing the book in this way makes it easy to locate each command in the book and understand its use. For each command entry you will see a brief description of what the tool will do, how it is used, and the options you will be given as you use the tool. In some cases the author’s suggestions or tips about the use of the tool will also be presented. As you learn the tools in Revit you may not need to read the full entry on the tool. To help facilitate this, many of the tools include a “Quick Steps” section to explain the tools and options in outline form. This book will help facilitate your learning of the Revit interface and all of the commands. For more experienced users, the command reference may introduce you to commands you have not used before or help you with commands you use less frequently. Whatever level of user you are, this command reference becomes a valuable resource to you as you work with Revit.

Download or read book Revit Architecture 2016 for Designers written by Douglas R. Seidler and published by Bloomsbury Publishing USA. This book was released on 2015-08-11 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building information modeling (BIM) is the new AutoCAD® for architects and interior designers-and Revit® Architecture is the leading software package in the BIM marketplace. Revit® Architecture 2016 for Designers is written specifically for architects and interior designers as they transition from CAD to BIM. Beginning with the building blocks of BIM modeling (walls, windows, and doors), the text progresses through dynamically generated 2-dimensional and 3-dimensional views to advanced features-such as photorealistic rendering, custom title blocks, and exporting drawings to AutoCAD® and SketchUp. This new edition is updated to include coverage on the latest changes in Revit® Architecture 2016. Instructions are fully illustrated, creating a smooth transition to the BIM environment for all designers. Clear, concise, and above all visual, this is the essential Revit® guide written specifically for interior designers and architects.

Download or read book Revit 2020 for Architecture written by Eric Wing and published by John Wiley & Sons. This book was released on 2019-11-12 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: The updated 2020 edition of the popular step-by-step tutorial for Revit Architecture Shortly after its first publication, Autodesk Revit for Architecture: No Experience Required quickly became the market-leading, real-world guide for learning and building with Revit—the powerful and sophisticated Building Information Modeling (BIM) software used by professionals the world over. Fully updated for Revit 2020, this popular, user-friendly book helps you learn the Revit interface, understand the fundamental concepts and features of the software, and design, document, and present a 3D BIM project. A continuous, step-by-step tutorial guides you through every phase of the project: from placing walls, doors, windows, structural elements, dimensions, and text, to generating documentation, advanced detailing, site grading, construction scheduling, material takeoffs, and much more. Updated and revised to include new content, this invaluable guide covers all the fundamental skills every Revit user needs. Whether used as a complete, start-to-finish lesson or as a quick-reference for unfamiliar tasks, this book will help you: Learn each phase of designing, documenting, and presenting a four-story office building using a simple yet engaging continuous tutorial Follow the tutorial sequentially or jump to any chapter by downloading the project files from the Sybex website Use the start-to-finish tutorial project as a reference for your own real-world projects and to develop a powerful Revit skillset Gain thorough knowledge of Revit’s essential concepts and features to make the move from 2D drafting to 3D building information modeling Get up to speed with advanced features, including new coverage of advanced walls, families, sites, topography, and more Autodesk Revit 2020 for Architecture No Experience Required is the go-to guide for both professionals and students seeking to learn Revit's essential functions quickly and effectively, to understand real workplace projects, processes, and workflows, and to set the stage for continuing on to more advanced skills.

Download or read book Introducing Autodesk Revit Architecture 2012 written by Patrick Davis and published by John Wiley & Sons. This book was released on 2011-07-05 with total page 1065 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fast, focused introduction to Revit functions, tools, and concepts As the leading Building Information Modeling software package, Revit is praised for its ease of use, power, and sophistication. Authored by a high profile team of Revit professionals, this reference and tutorial quickly has readers building skills to an intermediate level by exploring Revit tools and tasks, putting parametric modeling to use, detailing the basics of views and constraints, and working with detailing, massing, rendering, interior design, and more. Based on real-world workflows and projects, this book shows you readers how to model, document, present, and share designs using Revit just the way the pros do. Discussions and workflows are reinforced with tutorials drawn from the authors' extensive experience, and a beautiful 16-page color insert focuses on real-world Revit projects. Helps novice-to-intermediate level users learn Revit and its functions, tools, and concepts easily and efficiently Contains straightforward explanations, real-world examples, beautiful illustrations, and practical tutorials that focus intently on accomplishing vital Revit tasks Features in-depth discussions reinforced by comprehensive step-by-step exercises that show you how to model, document, present, and share your designs Includes a beautiful 16-page color insert with inspirational and instructional images drawn from the authors' professional experience This book is the perfect resource for readers of all skill levels who want to quickly accomplish crucial Revit tasks.

Download or read book Residential Design Using Autodesk Revit 2020 written by Daniel John Stine and published by SDC Publications. This book was released on 2019-04-15 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residential Design Using Autodesk Revit 2020 is designed for users completely new to Autodesk Revit. This text takes a project based approach to learning Autodesk Revit’s architectural tools in which you develop a single family residence all the way to photorealistic renderings like the one on the cover. Each book also includes access to extensive video training designed to further help you master Autodesk Revit. The lessons begin with a basic introduction to Autodesk Revit 2020. The first four chapters are intended to get you familiar with the user interface and many of the common menus and tools. Throughout the rest of the book a residential building is created and most of Autodesk Revit’s tools and features are covered in greater detail. Using step-by-step tutorial lessons, the residential project is followed through to create elevations, sections, floor plans, renderings, construction sets, etc. About the Videos Access to extensive video training is also included with your purchase of this book. These videos break down each topic into several short videos so that you can easily navigate to a specific aspect of a tool or feature in Autodesk Revit. This makes the videos both a powerful learning tool and convenient video reference. The videos make it easy to see the menu selections and will make learning Revit straightforward and simple. It’s like having the author by your side showing you exactly how to use all the major tools in Autodesk Revit.

Download or read book Designing Liners written by Anne Wealleans and published by Routledge. This book was released on 2006-09-27 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This in-depth history of the interior design of ocean liners surveys the transient history of interior design in relation to the development of passenger shipping, from commissioning by the line owners, methods and sources for the original creation of designs through to its construction, use and influence. It is a short-lived branch of architecture and design, lasting an average of fifteen years. As the design and taste mirrors and reinforces cultural assumptions about national identity, gender, class and race, not only did the interiors of ocean going liners reflect the changing hierarchies of society and shifting patterns in globalization, but the glamour and styling of the liners were reflected back into the design of interiors on land. Combining design history, architecture history, material and visual cultures, Designing Liners is a richly multidisciplinary work for those studying or researching this application of interior design.