Download or read book Interfacial Properties of Silicon Carbide Fiber Reinforced Reaction formed Silicon Carbide Matrix Composites written by Paula Jeanne Holmes and published by . This book was released on 1995 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Evaluation of Interfacial Properties in Silicon Carbide filament reinforced Glass Matrix Composites Using Pushout and Pullout Tests written by Jeffrey D. Bright and published by . This book was released on 1990 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Reaction Layer on Interfacial Shear Properties and Strength of Fiber in Silicon Carbide SiC Fiber Reinforced Titanium Alloy Composite written by C. Fujiwara and published by . This book was released on 1996 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of the interfacial thickness of the reaction layer on the interfacial shear properties and the tensile strength of double carbon-coated SCS-6 SiC fiber in Ti-15Mo-5Zr-3Al alloy matrix composite was examined. The major reaction layer thickness, that is, titanium-carbide (TiC) layer thickness, varied with heat-exposure temperature and time, respectively, and the resultant mean thickness of the reaction layer of the composite ranged from 0.4 to 1.7 ?m. The critical interfacial toughness, Gic, and the mean shear sliding resistance, ?s were evaluated by the thin specimen pushout technique. Tensile strength of the silicon-carbide (SiC) fiber extracted from the titanium alloy matrix before and after the heat exposure was determined in relationship to the thickness of the reaction layer. The critical interface toughness, Gic, for the failure of the root of the reaction layer was ?4 J/m2, and the average shear sliding resistance of the interface, ?s, was 102 to 118 MPa. The interfacial shear mechanical properties were adequate to prevent failure of the fiber due to the stress concentration caused by cracks that formed first in the reaction layer. The results showed that when the growth of reaction layer was within 1.7 ?m, the mean strength of the extracted fiber was unaffected by the existence of the reaction layer because of weak bonding between it and the fiber. However, with the increase of the reaction layer thickness, the strength distribution of the extracted fiber tended to Weibull bimodal distribution.

Download or read book Ceramic Fibers and Coatings written by Committee on Advanced Fibers for High-Temperature Ceramic Composites and published by National Academies Press. This book was released on 1998-05-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature ceramic fibers are the key components of ceramic matrix composites (CMCs). Ceramic fiber properties (strength, temperature and creep resistance, for example)-along with the debonding characteristics of their coatings-determine the properties of CMCs. This report outlines the state of the art in high-temperature ceramic fibers and coatings, assesses fibers and coatings in terms of future needs, and recommends promising avenues of research. CMCs are also discussed in this report to provide a context for discussing high-temperature ceramic fibers and coatings.

Download or read book Interface Control and Mechanical Property Improvements in Silicon Carbide titanium Composites written by William D. Brewer and published by . This book was released on 1982 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ceramic Matrix Composites written by Krishan K. Chawla and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: After an introductory chapter, the processing, microstructure, and properties of various ceramic materials, reinforcements, and their composites are described. A separate chapter is devoted to processing of ceramic reinforcements, with a special emphasis on fibers. Processing of ceramic matrix composites is the next chapter, which includes novel techniques such as sol-gel processing and ceramics from polymeric precursors. The next four chapters cover the subjects of interface region in ceramic composites, mechanical and physical properties, and the role of thermal stresses and the important subject of toughness enhancement. Laminated composites made of ceramics are described in a separate chapter. Finally, a chapter is devoted to various applications of ceramic matrix composites. Throughout the text, the underlying relationships between the components of the triad: processing, microstructure, and properties are brought out. An exhaustive list of references and suggested reading is provided.

Download or read book Interface Control and Mechnanical Property Improvements in Silicon Carbide titanium Composites written by William D. Brewer and published by . This book was released on 1982 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Ceramic Composites written by Narottam P. Bansal and published by Springer Science & Business Media. This book was released on 2006-08-25 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable handbook has been compiled by internationally renowned researchers in the field. Each chapter is focused on a specific composite system or a class of composites, presenting a detailed description of processing, properties, and applications.

Download or read book Interface Science and Composites written by Soo-Jin Park and published by Academic Press. This book was released on 2011-07-18 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of Interface Science and Composites is to facilitate the manufacture of technological materials with optimized properties on the basis of a comprehensive understanding of the molecular structure of interfaces and their resulting influence on composite materials processes. From the early development of composites of various natures, the optimization of the interface has been of major importance. While there are many reference books available on composites, few deal specifically with the science and mechanics of the interface of materials and composites. Further, many recent advances in composite interfaces are scattered across the literature and are here assembled in a readily accessible form, bringing together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume. The central theme of the book is tailoring the interface science of composites to optimize the basic physical principles rather than on the use of materials and the mechanical performance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It also deals mainly with interfaces in advanced composites made from high-performance fibers, such as glass, carbon, aramid, and some inorganic fibers, and matrix materials encompassing polymers, carbon, metals/alloys, and ceramics. Includes chapter on the development of a nanolevel dispersion of graphene particles in a polymer matrix Focus on tailoring the interface science of composites to optimize the basic physical principles Covers mainly interfaces in advanced composites made from high performance fibers

Download or read book Influence of Interfacial Shear Strength on the Mechanical Properties of SiC Fiber Reinforced Reaction Bonded Silicon Nitride Matrix Composites written by and published by . This book was released on 1990 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: The influence of fiber/matrix interface microstructure and interfacial shear strength on the mechanical properties of a fiber-reinforced ceramic composite has been evaluated. The composite consisted of about 30 vol % uniaxially aligned 142 micron diameter SiC fibers (Textron SCS-6) in a reaction- bonded Si3N4 matrix (SiC/RBSN). The interface microstructure was varied by controlling the composite fabrication conditions and by heat treating the composite in an oxidizing environment. Interfacial shear strength was determined by the matrix crack spacing method. The results of microstructural examination indicate that the carbon-rich coating provided with the as-produced SiC fibers was stable in composites fabricated at 1200 C in a nitrogen or in a nitrogen plus 4 percent hydrogen mixture for 40 hr. However this coating degraded in composites fabricated at 1350 C in N2 + 4%H2 for 40 and 72 hr and also in composites heat treated in an oxidizing environment at 600 C for 100 hr after fabrication at 1200 C in a nitrogen. It was determined that degradation occurred by carbon removal which in turn had a strong influence on interfacial shear strength and other mechanical properties. Specifically, as the carbon coating was removed, the composite interfacial shear strength, primary elastic modulus, first matrix cracking stress, and ultimate tensile strength decreased, but the first matrix cracking strain remained nearly the same. Keywords: Ceramic matrix composites; Interfacial shear strength; Mechanical properties.

Download or read book Mullite Fiber Reinforced Reaction Bonded Si3N4 Composites written by and published by . This book was released on 1996 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture toughnesses of brittle ceramic materials have been improved by introducing reinforcements and carefully tailored interface layers. Silicon carbide and Si3N4 have been emphasized as matrices of structural composites intended for high temperature service because they combine excellent mechanical, chemical, thermal and physical properties. Both matrices have been successfully toughened with SiC fibers, whiskers and particles for ceramic matrix composite (CMC) parts made by sintering, hot pressing or reaction forming processes. These SiC reinforced CMCs have exhibited significantly improved toughnesses at low and intermediate temperature levels, as well as retention of properties at high temperatures for selected exposures; however, they are vulnerable to attack from elevated temperature dry and wet oxidizing atmospheres after the matrix has cracked. Property degradation results from oxidation of interface layers and/or reinforcements. The problem is particularly acute for small diameter ( -20 tim) polymer derived SiC fibers used for weavable toes. This research explored opportunities for reinforcing Si3N4 matrices with fibers having improved environmental stability; the findings should also be applicable to SiC matrix CMCs. (MM).

Download or read book Effects of Interface Coating and Nitride Enhancing Additive on Properties of Hi Nicalon Sic Fiber Reinforced Reaction Bonded Silicon Nitride Composite written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-27 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strong and tough Hi-Nicalon SiC fiber reinforced reaction-bonded silicon nitride matrix composites (SiC/ RBSN) have been fabricated by the fiber lay-up approach. Commercially available uncoated and PBN, PBN/Si-rich PBN, and BN/SiC coated SiC Hi-Nicalon fiber tows were used as reinforcement. The composites contained approximately 24 vol % of aligned 14 micron diameter SiC fibers in a porous RBSN matrix. Both one- and two-dimensional composites were characterized. The effects of interface coating composition, and the nitridation enhancing additive, NiO, on the room temperature physical, tensile, and interfacial shear strength properties of SiC/RBSN matrix composites were evaluated. Results indicate that for all three coated fibers, the thickness of the coatings decreased from the outer periphery to the interior of the tows, and that from 10 to 30 percent of the fibers were not covered with the interface coating. In the uncoated regions, chemical reaction between the NiO additive and the SiC fiber occurs causing degradation of tensile properties of the composites. Among the three interface coating combinations investigated, the BN/SiC coated Hi-Nicalon SiC fiber reinforced RBSN matrix composite showed the least amount of uncoated regions and reasonably uniform interface coating thickness. The matrix cracking stress in SiC/RBSN composites was predicted using a fracture mechanics based crack bridging model. Bhatt, Ramakrishana T. and Hull, David R. and Eldridge, Jeffrey I. and Babuder, Raymond Glenn Research Center NASA/TM-2000-210211, E-12330, NAS 1.15:210211

Download or read book Advances in Ceramic Matrix Composites written by I M Low and published by Woodhead Publishing. This book was released on 2018-01-20 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ceramic Matrix Composites, Second Edition, delivers an innovative approach to ceramic matrix composites, focusing on the latest advances and materials developments. As advanced ceramics and composite materials are increasingly utilized as components in batteries, fuel cells, sensors, high-temperature electronics, membranes and high-end biomedical devices, and in seals, valves, implants, and high-temperature and wear components, this book explores the substantial progress in new applications. Users will gain knowledge of the latest advances in CMCs, with an update on the role of ceramics in the fabrication of Solid Oxide Fuel Cells for energy generation, and on natural fiber-reinforced eco-friendly geopolymer and cement composites. The specialized information contained in this book will be highly valuable to researchers and graduate students in ceramic science, engineering and ceramic composites technology, and engineers and scientists in the aerospace, energy, building and construction, biomedical and automotive industries. Provides detailed coverage of parts and processing, properties and applications Includes new developments in the field, such as natural fiber-reinforced composites and the use of CMCs in Solid Oxide Fuel Cells (SOFCs) Presents state-of-the-art research, enabling the reader to understand the latest applications for CMCs

Download or read book CVD Silicon Carbide Monofilament Reinforced SrO Al2O3 2SiO2 SAS Glass ceramic Composites written by and published by . This book was released on 1995 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Low Cost Fabrication of Silicon Carbide Based Ceramics and Fiber Reinforced Composites written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-12-29 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A low cost processing technique called reaction forming for the fabrication of near-net and complex shaped components of silicon carbide based ceramics and composites is presented. This process consists of the production of a microporous carbon preform and subsequent infiltration with liquid silicon or silicon-refractory metal alloys. The microporous preforms are made by the pyrolysis of a polymerized resin mixture with very good control of pore volume and pore size thereby yielding materials with tailorable microstructure and composition. Mechanical properties (elastic modulus, flexural strength, and fracture toughness) of reaction-formed silicon carbide ceramics are presented. This processing approach is suitable for various kinds of reinforcements such as whiskers, particulates, fibers (tows, weaves, and filaments), and 3-D architectures. This approach has also been used to fabricate continuous silicon carbide fiber reinforced ceramic composites (CFCC's) with silicon carbide based matrices. Strong and tough composites with tailorable matrix microstructure and composition have been obtained. Microstructure and thermomechanical properties of a silicon carbide (SCS-6) fiber reinforced reaction-formed silicon carbide matrix composites are discussed. Singh, M. and Levine, S. R. Glenn Research Center NASA-TM-107001, E-9216-1, NAS 1.15:107001 NAS3-27186; RTOP 537-04-10...

Download or read book Tailoring Multiphase and Composite Ceramics written by Richard E. Tressler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the Twenty-First University Conference on Ceramic Science held at The Pennsylvania State University, University Park, PA on July 17, 18 and 19, 1985 are compiled in this volume "Tailoring Multiphase and Composite Ceramics". This Conference emphasized the' discussion and analysis of the properties of multiphase ceramic materials in which the microstructure is deliberately tailored for specific applications or properties. Inter nationally recognized authorities presented keynote and invited lectures on topics dealing with processing and fabrication of multiphase and com posite electroceramics, fiber reinforced composites and high temperature multiphase ceramics. Results of recent research were presented in oral and poster sessions by leading researchers from several countries. This collection of papers represents the state of the art in our understand ing of the processing-structure-property interrelationships for these materials which possess unique and useful electrical, magnetic, optical, mechanical and thermal properties as a result of their multiphase nature. We are grateful for the financial support of the National Science Foundation, the Office of Naval Research, the Air Force Office of Scien tific Research, and the Defense Advanced Research Projects Agency for this conference. We gratefully acknowledge Prof. Robert Davis' leader ship role in steering and expanding this university conference series on ceramic science. We thank Ron Avillion and Linda Rose for their expert assistance in planning and coordinating the meeting. Thanks are due to Ms. Marian Reed, Ms. Judy Bell and Ms.

Download or read book Interface Reactions and Their Influence on Properties of SiC Fiber reinforced Ceramic Matrix Composites written by Hyunho Shin and published by . This book was released on 1994 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: