Download or read book Interface Oral Health Science 2009 written by Takashi Sasano and published by Springer Science & Business Media. This book was released on 2010-04-03 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 2002, the Tohoku University Graduate School of Dentistry has proposed “Interface Oral Health Science” as a major theme for next-generation dental research. That theme is based on the following new concept: healthy oral fu- tion is maintained by biological and biomechanical harmony among three s- tems: (1) oral tissues (host); (2) parasitic microorganisms of the oral cavity (parasites); and (3) biomaterials. The concept implies that oral diseases such as dental caries, periodontal disease, and temporomandibular disorders should be interpreted as “interface disorders” that result from disruption of the intact int- face among these systems. The uniqueness of this concept rests on the fact that it not only encompasses the field of dentistry and dental medicine, but also expands the common ground shared with other fields, including medicine, ag- culture, material science, engineering, and pharmacology. We aim to promote advances in dental research and to activate collaboration with related fields by putting interface oral health science into practice. On this basis, we have already organized the 1st and 2nd International Symposiums for Interface Oral Health Science, which included inspiring special lectures, symposiums, poster pres- tations, and other discussions. The contents of the two symposiums were p- lished as monographs entitled Interface Oral Health Science in 2005 and 2007. The 3rd International Symposium was held in January 2009 as part of this project.
Download or read book Interface Oral Health Science 2011 written by Keiichi Sasaki and published by Springer Science & Business Media. This book was released on 2012-03-05 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interface oral health science was founded on the concept that healthy oral function is maintained by biological and biomechanical harmony between three systems: oral tissues, parasitic oral microorganisms, and biomaterials. On that basis, dental caries, periodontal disease, and temporomandibular joint disorders may be regarded as interface disorders that result from a disruption in the intact interface of these systems. Interface oral health science encompasses the fields of dentistry and dental medicine, but also extends to general medicine, agriculture, biomaterials science, bioengineering, and pharmacology. This book is a compendium of the research presented at symposiums held in 2011 by the Tohoku University Graduate School of Dentistry and by the Forsyth Institute. Its publication is intended provide further impetus for the progress of oral science and health, pointing the way for dental research for future generations.
Download or read book Interface Oral Health Science 2014 written by Keiichi Sasaki and published by Springer. This book was released on 2014-11-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Tohoku University Graduate School of Dentistry first introduced the concept of “Interface Oral Health Science”, designed to establish and maintain healthy oral cavities, which are home to a number of mixed systems. Included in those systems are: (1) host tissues such as teeth, mucosa, muscle and bone, (2) parasites and microorganisms cohabiting the surfaces of the oral cavity and (3) biomaterials that are used for the rehabilitation of oral functions. In addition, (4) these systems are subject to severe and complex mechanical forces. Therefore, it is critical to promote dental studies that integrate a wide range of interdisciplinary research as medicine, agriculture, material science, engineering, and pharmacology. With this incentive, international symposiums for interface oral health science have been held several times in the past. The concept has since refined and expanded, the result being the “Biosis-Abiosis Intelligent Interface,” and projects aiming at the creation of highly functional and autonomic intelligent interfaces are ongoing. This book brings together a number of studies on incentives and projects by leading authors. Topics include biosis-abiosis interface of dental implants, biomaterials in interface science, biomedical engineering interface and cell manipulation and tissue regeneration. Readers not only from the field of dentistry but also many related areas will find this book a valuable resource.
Download or read book Interface Oral Health Science 2016 written by Keiichi Sasaki and published by Springer. This book was released on 2016-12-08 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is open access under a CC BY 4.0 license. This volume broadens understanding of dentistry and promotes interdisciplinary research across a wide range of related fields, based on the symposium entitled "Innovative Research for Biosis–Abiosis Intelligent Interface 2016". It aims to create highly functional and autonomic intelligent interface by combining highly functional interface science with the technology of an evaluation and a control at the interface, with the various topics of biomaterials, innovation for oral science and application, regenerative oral science, and medical engineering. Since 2002, the Tohoku University Graduate School of Dentistry has hosted “Interface Oral Health Science” several times as the main theme of dental research in the twenty-first century, and this is the sixth proceedings of the symposiums following the ones in 2005, 2007, 2009, 2011, and 2014. This book benefits not only dental scientists but also other health scientists including medical physicians and pharmacologists, material scientists, engineers, and any scientist who is involved in variety of disciplines.
Download or read book Biomedical Devices written by Tugrul Özel and published by John Wiley & Sons. This book was released on 2016-09-12 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomedical Devices: Design, Prototyping, and Manufacturing features fundamental discussions of all facets of materials processing and manufacturing processes across a wide range of medical devices and artificial tissues. Represents the first compilation of information on the design, prototyping, and manufacture of medical devices into one volume Offers in-depth coverage of medical devices, beginning with an introductory overview through to the design, manufacture, and applications Features examples of a variety of medical applications of devices, including biopsy micro forceps, micro-needle arrays, wrist implants, spinal spacers, and fixtures Provides students, doctors, scientists, and technicians interested in the development and applications of medical devices the ideal reference source
Download or read book Applications of Laser Ablation written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2016-12-21 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser ablation refers to the phenomenon in which a low wavelength and short pulse (ns-fs) duration of laser beam irradiates the surface of a target to induce instant local vaporization of the target material generating a plasma plume consisting of photons, electrons, ions, atoms, molecules, clusters, and liquid or solid particles. This book covers various aspects of using laser ablation phenomenon for material processing including laser ablation applied for the deposition of thin films, for the synthesis of nanomaterials, and for the chemical compositional analysis and surface modification of materials. Through the 18 chapters written by experts from international scientific community, the reader will have access to the most recent research and development findings on laser ablation through original research studies and literature reviews.
Download or read book Biodental Engineering III written by R.M. Natal Jorge and published by CRC Press. This book was released on 2014-06-11 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dentistry is a branch of medicine with its own peculiarities and very diverse areas of action, which means that it can be considered as an interdisciplinary field. Currently the use of new techniques and technologies receives much attention. Biodental Engineering III contains contributions from 13 countries, which were presented at BIODENTAL 2014,
Download or read book Biodental Engineering II written by R.M. Natal Jorge and published by CRC Press. This book was released on 2013-11-05 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dentistry is a branch of medicine with its own peculiarities and very diverse areas of action, which means that it can be considered as an interdisciplinary field. BIODENTAL ENGINEERING II contains the full papers presented at the 2nd International Conference on Biodental Engineering (BioDENTAL 2012, Porto, Portugal, 7-8 December 2012). The contributions from 8 countries provide a comprehensive, multi-disciplinary coverage of the state-of-the-art in biodental engineering, and include the following subjects: • Aesthetics • Bioengineering • Biomaterials • Biomechanical disorders • Biomedical devices • Computational bio-imaging and visualization • Computational methods • Dental medicine • Experimental mechanics • Signal processing and analysis • Implantology • Minimally invasive devices and techniques • Orthodontics • Prosthesis and orthosis • Simulation • Software development • Telemedicine • Tissue engineering • Virtual reality BIODENTAL ENGINEERING II intends to cover recent advances in new techniques and technologies, and will be of interest to academics and others interested in biodental engineering.
Download or read book The Book of Teeth and Bones written by Masayuki Okazaki and published by Cambridge Scholars Publishing. This book was released on 2021-01-12 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be very valuable for people suffering from teeth and bone diseases and students aiming to become either dentists or doctors. Bones regenerate, but teeth do not, once they are damaged. This is exactly why dental materials are needed, though, of course, it would be best if they did not have to be used in the first place. Unfortunately, it is impossible to create artificial teeth exactly the same as natural teeth using today’s dental materials and technology. As such, it is very important to pay attention to the teeth and routinely take good care of them if people do not want to regret the loss of their teeth in their old age. This book introduces the reader to the world of apatites used to compose teeth and bones. It will boost their interest in biomaterials, and improve their understanding about the daily efforts of dentists, dental technicians, and hygienists.
Download or read book Biomaterials Science and Engineering written by Rosario Pignatello and published by BoD – Books on Demand. This book was released on 2011-09-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: These contribution books collect reviews and original articles from eminent experts working in the interdisciplinary arena of biomaterial development and use. From their direct and recent experience, the readers can achieve a wide vision on the new and ongoing potentials of different synthetic and engineered biomaterials. Contributions were not selected based on a direct market or clinical interest, than on results coming from very fundamental studies which have been mainly gathered for this book. This fact will also allow to gain a more general view of what and how the various biomaterials can do and work for, along with the methodologies necessary to design, develop and characterize them, without the restrictions necessarily imposed by industrial or profit concerns. The book collects 22 chapters related to recent researches on new materials, particularly dealing with their potential and different applications in biomedicine and clinics: from tissue engineering to polymeric scaffolds, from bone mimetic products to prostheses, up to strategies to manage their interaction with living cells.
Download or read book Novel Structured Metallic and Inorganic Materials written by Yuichi Setsuhara and published by Springer. This book was released on 2019-07-01 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a series of research topics investigated during the 6 years from 2010 through 2015 in the project "Advanced Materials Development and Integration of Novel Structured Metallic and Inorganic Materials". Every section of the book is aimed at understanding the most advanced research by describing details starting with the fundamentals as often as possible. Because both fundamental and cutting-edge topics are contained in this book, it provides a great deal of useful information for chemists as well as for materials scientists and engineers who wish to consider future prospects and innovations. The contents of Novel Structured Metallic and Inorganic Materials are unique in materials science and technology. The project was carried out through the cooperation of research groups in the following six institutes in Japan: the Institute for Materials Research (IMR), Tohoku University; the Materials and Structures Laboratory (MSL), Tokyo Institute of Technology; the Joining and Welding Research Institute (JWRI), Osaka University; the Eco-Topia Science Institute (EST), Nagoya University; the Institute of Biomaterials and Bioengineering (IBB), Tokyo Medical and Dental University; and the Institute for Nanoscience and Nanotechnology (INN), Waseda University. Major objectives of the project included creation of advanced metallic and inorganic materials with a novel structure, as well as development of materials-joining technologies for development of cutting-edge applications as environmental and energy materials, biomedical materials, and electronic materials for contributing to the creation of a safer and more secure society.
Download or read book Approximate Analytical Methods for Solving Ordinary Differential Equations written by T.S.L Radhika and published by CRC Press. This book was released on 2014-10-31 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approximate Analytical Methods for Solving Ordinary Differential Equations (ODEs) is the first book to present all of the available approximate methods for solving ODEs, eliminating the need to wade through multiple books and articles. It covers both well-established techniques and recently developed procedures, including the classical series solution method, diverse perturbation methods, pioneering asymptotic methods, and the latest homotopy methods. The book is suitable not only for mathematicians and engineers but also for biologists, physicists, and economists. It gives a complete description of the methods without going deep into rigorous mathematical aspects. Detailed examples illustrate the application of the methods to solve real-world problems. The authors introduce the classical power series method for solving differential equations before moving on to asymptotic methods. They next show how perturbation methods are used to understand physical phenomena whose mathematical formulation involves a perturbation parameter and explain how the multiple-scale technique solves problems whose solution cannot be completely described on a single timescale. They then describe the Wentzel, Kramers, and Brillown (WKB) method that helps solve both problems that oscillate rapidly and problems that have a sudden change in the behavior of the solution function at a point in the interval. The book concludes with recent nonperturbation methods that provide solutions to a much wider class of problems and recent analytical methods based on the concept of homotopy of topology.
Download or read book 3D Printing in Oral Health Science written by Prabhat Kumar Chaudhari and published by Springer Nature. This book was released on 2022-09-26 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on 3D printing in oral health science aims to equip the reader with a sound understanding of contemporary clinical applications in all fields of dentistry and their future directions. In the last few years, the development of 3D printing for medical and dental applications has increased tremendously. Advancements in 3D printing create the possibility of customized products, savings on small-scale productions, ease of sharing and processing of patient image data, and educational up-gradation. Looking at the dental specialties, it is evident that 3D printing has applications in all aspects of oral health science including prosthodontics, oral surgery, periodontics, endodontics, and orthodontics. This book will cover all major fields in dentistry and will help the practitioner in the process of decision-making and apply concepts in clinical or laboratory practice. It is based on current scientific evidence to provide readers with an up-to-date contemporary understanding of the subject, both from the clinical and the technological side. The book is a valuable asset for all who specialize in 3D printing and for those interested in learning more about this field.
Download or read book Nutrition and Infections written by Xiuyang Li and published by Frontiers Media SA. This book was released on 2022-09-13 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Biomedical Engineering written by and published by Elsevier. This book was released on 2018-09-01 with total page 2069 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Biomedical Engineering, Three Volume Set is a unique source for rapidly evolving updates on topics that are at the interface of the biological sciences and engineering. Biomaterials, biomedical devices and techniques play a significant role in improving the quality of health care in the developed world. The book covers an extensive range of topics related to biomedical engineering, including biomaterials, sensors, medical devices, imaging modalities and imaging processing. In addition, applications of biomedical engineering, advances in cardiology, drug delivery, gene therapy, orthopedics, ophthalmology, sensing and tissue engineering are explored. This important reference work serves many groups working at the interface of the biological sciences and engineering, including engineering students, biological science students, clinicians, and industrial researchers. Provides students with a concise description of the technologies at the interface of the biological sciences and engineering Covers all aspects of biomedical engineering, also incorporating perspectives from experts working within the domains of biomedicine, medical engineering, biology, chemistry, physics, electrical engineering, and more Contains reputable, multidisciplinary content from domain experts Presents a ‘one-stop’ resource for access to information written by world-leading scholars in the field
Download or read book High Technology Research and Applications 2017 written by Georgii E. Osokin and published by Trans Tech Publications Ltd. This book was released on 2018-04-27 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: 6th International Conference for Young Scientists High Technology: Research and Applications (HTRA 2017) Selected, peer reviewed papers from the VI International Science and Engineering Conference “High Technology: Research and Applications” (HTRA), November 27-29, 2017, Tomsk, Russia
Download or read book Advances in Metallic Biomaterials written by Mitsuo Niinomi and published by Springer. This book was released on 2015-06-17 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews fundamental advances in the use of metallic biomaterials to reconstruct hard tissues and blood vessels. It also covers the latest advances in representative metallic biomaterials, such as stainless steels, Co-Cr alloys, titanium and its alloys, zirconium, tantalum and niobium based alloys. In addition, the latest findings on corrosion, cytotoxic and allergic problems caused by metallic biomaterials are introduced. The book offers a valuable reference source for researchers, graduate students and clinicians working in the fields of materials, surgery, dentistry, and mechanics. Mitsuo Niinomi, PhD, D.D.Sc., is a Professor at the Institute for Materials Research, Tohoku University, Japan. Takayuki Narushima, PhD, is a Professor at the Department of Materials Processing, Tohoku University, Japan. Masaaki Nakai, PhD, is an Associate Professor at the Institute for Materials Research, Tohoku University, Japan.
