Download or read book High Level Synthesis written by Philippe Coussy and published by Springer Science & Business Media. This book was released on 2008-08-01 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an excellent collection of contributions addressing different aspects of high-level synthesis from both industry and academia. It includes an overview of available EDA tool solutions and their applicability to design problems.

Download or read book Interconnect and Temperature Aware Unified Physical and High Level Synthesis written by Vyas Krishnan and published by Springer. This book was released on 2025-11-08 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The exponential scaling in CMOS transistor sizes over the past three decades have enabled spectacular advances in integrated circuit technology, allowing the integration of more than a billion transistors in modern very large-scale integrated (VLSI) circuits. Over the last four decades, transistor scaling has followed Moore's law, and according to projections made by the International Technology Roadmap for Semiconductors (ITRS), minimum feature sizes are expected to reach 22nm by 2012. The primary drivers for transistor scaling are the associated benefits of lower system costs, improved performance, and system reliability. However, continuous device and interconnect scaling trends in deep submicron designs have created new challenges for integrated circuit designers such as increased interconnect delays due to rising parasitic resistance and capacitance of on-chip wiring, increased on-chip power densities, and performance and reliability problems posed by on-chip thermal gradients and thermal-hotspots. Thus, the major challenge is in achieving reliable, high-performance system implementations, all the way from the micro-architecture level down to the layout level. In order to realize such an implementation, a unified physical-level and high-level synthesis method becomes paramount, to ensure predictability of HLS design flows and minimize design iterations.

Download or read book Thermally Aware Design written by Yong Zhan and published by Now Publishers Inc. This book was released on 2008 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an overview of analysis and optimization techniques for thermally-aware chip design.

Download or read book Physical Design for 3D Integrated Circuits written by Aida Todri-Sanial and published by CRC Press. This book was released on 2017-12-19 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Design for 3D Integrated Circuits reveals how to effectively and optimally design 3D integrated circuits (ICs). It also analyzes the design tools for 3D circuits while exploiting the benefits of 3D technology. The book begins by offering an overview of physical design challenges with respect to conventional 2D circuits, and then each chapter delivers an in-depth look at a specific physical design topic. This comprehensive reference: Contains extensive coverage of the physical design of 2.5D/3D ICs and monolithic 3D ICs Supplies state-of-the-art solutions for challenges unique to 3D circuit design Features contributions from renowned experts in their respective fields Physical Design for 3D Integrated Circuits provides a single, convenient source of cutting-edge information for those pursuing 2.5D/3D technology.

Download or read book Machine Learning in VLSI Computer Aided Design written by Ibrahim (Abe) M. Elfadel and published by Springer. This book was released on 2019-03-15 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with an up-to-date account of the use of machine learning frameworks, methodologies, algorithms and techniques in the context of computer-aided design (CAD) for very-large-scale integrated circuits (VLSI). Coverage includes the various machine learning methods used in lithography, physical design, yield prediction, post-silicon performance analysis, reliability and failure analysis, power and thermal analysis, analog design, logic synthesis, verification, and neuromorphic design. Provides up-to-date information on machine learning in VLSI CAD for device modeling, layout verifications, yield prediction, post-silicon validation, and reliability; Discusses the use of machine learning techniques in the context of analog and digital synthesis; Demonstrates how to formulate VLSI CAD objectives as machine learning problems and provides a comprehensive treatment of their efficient solutions; Discusses the tradeoff between the cost of collecting data and prediction accuracy and provides a methodology for using prior data to reduce cost of data collection in the design, testing and validation of both analog and digital VLSI designs. From the Foreword As the semiconductor industry embraces the rising swell of cognitive systems and edge intelligence, this book could serve as a harbinger and example of the osmosis that will exist between our cognitive structures and methods, on the one hand, and the hardware architectures and technologies that will support them, on the other....As we transition from the computing era to the cognitive one, it behooves us to remember the success story of VLSI CAD and to earnestly seek the help of the invisible hand so that our future cognitive systems are used to design more powerful cognitive systems. This book is very much aligned with this on-going transition from computing to cognition, and it is with deep pleasure that I recommend it to all those who are actively engaged in this exciting transformation. Dr. Ruchir Puri, IBM Fellow, IBM Watson CTO & Chief Architect, IBM T. J. Watson Research Center

Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.

Download or read book Notes on the Synthesis of Form written by Christopher Alexander and published by Harvard University Press. This book was released on 1964 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: "These notes are about the process of design: the process of inventing things which display new physical order, organization, form, in response to function." This book, opening with these words, presents an entirely new theory of the process of design. In the first part of the book, Christopher Alexander discusses the process by which a form is adapted to the context of human needs and demands that has called it into being. He shows that such an adaptive process will be successful only if it proceeds piecemeal instead of all at once. It is for this reason that forms from traditional un-self-conscious cultures, molded not by designers but by the slow pattern of changes within tradition, are so beautifully organized and adapted. When the designer, in our own self-conscious culture, is called on to create a form that is adapted to its context he is unsuccessful, because the preconceived categories out of which he builds his picture of the problem do not correspond to the inherent components of the problem, and therefore lead only to the arbitrariness, willfulness, and lack of understanding which plague the design of modern buildings and modern cities. In the second part, Mr. Alexander presents a method by which the designer may bring his full creative imagination into play, and yet avoid the traps of irrelevant preconception. He shows that, whenever a problem is stated, it is possible to ignore existing concepts and to create new concepts, out of the structure of the problem itself, which do correspond correctly to what he calls the subsystems of the adaptive process. By treating each of these subsystems as a separate subproblem, the designer can translate the new concepts into form. The form, because of the process, will be well-adapted to its context, non-arbitrary, and correct. The mathematics underlying this method, based mainly on set theory, is fully developed in a long appendix. Another appendix demonstrates the application of the method to the design of an Indian village.

Download or read book Digital Logic Design Using Verilog written by Vaibbhav Taraate and published by Springer. This book was released on 2016-05-17 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to serve as a hands-on professional reference with additional utility as a textbook for upper undergraduate and some graduate courses in digital logic design. This book is organized in such a way that that it can describe a number of RTL design scenarios, from simple to complex. The book constructs the logic design story from the fundamentals of logic design to advanced RTL design concepts. Keeping in view the importance of miniaturization today, the book gives practical information on the issues with ASIC RTL design and how to overcome these concerns. It clearly explains how to write an efficient RTL code and how to improve design performance. The book also describes advanced RTL design concepts such as low-power design, multiple clock-domain design, and SOC-based design. The practical orientation of the book makes it ideal for training programs for practicing design engineers and for short-term vocational programs. The contents of the book will also make it a useful read for students and hobbyists.

Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Democracy and Education written by John Dewey and published by Createspace Independent Publishing Platform. This book was released on 1916 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: . Renewal of Life by Transmission. The most notable distinction between living and inanimate things is that the former maintain themselves by renewal. A stone when struck resists. If its resistance is greater than the force of the blow struck, it remains outwardly unchanged. Otherwise, it is shattered into smaller bits. Never does the stone attempt to react in such a way that it may maintain itself against the blow, much less so as to render the blow a contributing factor to its own continued action. While the living thing may easily be crushed by superior force, it none the less tries to turn the energies which act upon it into means of its own further existence. If it cannot do so, it does not just split into smaller pieces (at least in the higher forms of life), but loses its identity as a living thing. As long as it endures, it struggles to use surrounding energies in its own behalf. It uses light, air, moisture, and the material of soil. To say that it uses them is to say that it turns them into means of its own conservation. As long as it is growing, the energy it expends in thus turning the environment to account is more than compensated for by the return it gets: it grows. Understanding the word "control" in this sense, it may be said that a living being is one that subjugates and controls for its own continued activity the energies that would otherwise use it up. Life is a self-renewing process through action upon the environment.

Download or read book Management of Legionella in Water Systems written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-02-20 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Legionnaires' disease, a pneumonia caused by the Legionella bacterium, is the leading cause of reported waterborne disease outbreaks in the United States. Legionella occur naturally in water from many different environmental sources, but grow rapidly in the warm, stagnant conditions that can be found in engineered water systems such as cooling towers, building plumbing, and hot tubs. Humans are primarily exposed to Legionella through inhalation of contaminated aerosols into the respiratory system. Legionnaires' disease can be fatal, with between 3 and 33 percent of Legionella infections leading to death, and studies show the incidence of Legionnaires' disease in the United States increased five-fold from 2000 to 2017. Management of Legionella in Water Systems reviews the state of science on Legionella contamination of water systems, specifically the ecology and diagnosis. This report explores the process of transmission via water systems, quantification, prevention and control, and policy and training issues that affect the incidence of Legionnaires' disease. It also analyzes existing knowledge gaps and recommends research priorities moving forward.

Download or read book VLSI Physical Design From Graph Partitioning to Timing Closure written by Andrew B. Kahng and published by Springer Science & Business Media. This book was released on 2011-01-27 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and optimization of integrated circuits are essential to the creation of new semiconductor chips, and physical optimizations are becoming more prominent as a result of semiconductor scaling. Modern chip design has become so complex that it is largely performed by specialized software, which is frequently updated to address advances in semiconductor technologies and increased problem complexities. A user of such software needs a high-level understanding of the underlying mathematical models and algorithms. On the other hand, a developer of such software must have a keen understanding of computer science aspects, including algorithmic performance bottlenecks and how various algorithms operate and interact. "VLSI Physical Design: From Graph Partitioning to Timing Closure" introduces and compares algorithms that are used during the physical design phase of integrated-circuit design, wherein a geometric chip layout is produced starting from an abstract circuit design. The emphasis is on essential and fundamental techniques, ranging from hypergraph partitioning and circuit placement to timing closure.

Download or read book Dependable Embedded Systems written by Jörg Henkel and published by Springer Nature. This book was released on 2020-12-09 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems.

Download or read book The Impact of School Infrastructure on Learning written by Peter Barrett and published by World Bank Publications. This book was released on 2019-02-04 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'The Impact of School Infrastructure on Learning: A Synthesis of the Evidence provides an excellent literature review of the resources that explore the areas of focus for improved student learning, particularly the aspiration for “accessible, well-built, child-centered, synergetic and fully realized learning environments.†? Written in a style which is both clear and accessible, it is a practical reference for senior government officials and professionals involved in the planning and design of educational facilities, as well as for educators and school leaders. --Yuri Belfali, Head of Division, Early Childhood and Schools, OECD Directorate for Education and Skills This is an important and welcome addition to the surprisingly small, evidence base on the impacts of school infrastructure given the capital investment involved. It will provide policy makers, practitioners, and those who are about to commission a new build with an important and comprehensive point of reference. The emphasis on safe and healthy spaces for teaching and learning is particularly welcome. --Harry Daniels, Professor of Education, Department of Education, Oxford University, UK This report offers a useful library of recent research to support the, connection between facility quality and student outcomes. At the same time, it also points to the unmet need for research to provide verifiable and reliable information on this connection. With such evidence, decisionmakers will be better positioned to accurately balance the allocation of limited resources among the multiple competing dimensions of school policy, including the construction and maintenance of the school facility. --David Lever, K-12 Facility Planner, Former Executive Director of the Interagency Committee on School Construction, Maryland Many planners and designers are seeking a succinct body of research defining both the issues surrounding the global planning of facilities as well as the educational outcomes based on the quality of the space provided. The authors have finally brought that body of evidence together in this well-structured report. The case for better educational facilities is clearly defined and resources are succinctly identified to stimulate the dialogue to come. We should all join this conversation to further the process of globally enhancing learning-environment quality! --David Schrader, AIA, Educational Facility Planner and Designer, Former Chairman of the Board of Directors, Association for Learning Environments (A4LE)

Download or read book Wave Pipelining Theory and CMOS Implementation written by C. Thomas Gray and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: The quest for higher performance digital systems for applications such as gen eral purpose computing, signal/image processing, and telecommunications and an increasing cost consciousness have led to a major thrust for high speed VLSI systems implemented in inexpensive and widely available technologies such as CMOS. This monograph, based on the first author's doctoral dissertation, con centrates on the technique of wave pipelining as one method toward achieving this goal. The primary focus of this monograph is to provide a coherent pre sentation of the theory of wave pipelined operation of digital circuits and to discuss practical design techniques for the realization of wave pipelined circuits in the CMOS technology. Wave pipelining can be applied to a variety of cir cuits for increased performance. For example, many architectures that support systolic computation lend themselves to wave pipelined realization. Also, the wave pipeline design methodology emphasizes the role of controlled clock skew in extracting enhanced performance from circuits that are not deeply pipelined. Wave pipelining (also known as maximal rate pipelining) is a timing method ology used in digital systems to increase the number of effective pipeline stages without increasing the number of physical registers in the pipeline. Using this technique, new data is applied to the inputs of a combinational logic block be fore the outputs due to previous inputs are available thus effectively pipelining the combinational logic and maximizing the utilization of the logic.

Download or read book Global Climate Change Impacts in the United States written by U.S. Global Change Research Program and published by Cambridge University Press. This book was released on 2009-08-24 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the science of climate change and impacts on the United States, for the public and policymakers.

Download or read book RTL Hardware Design Using VHDL written by Pong P. Chu and published by John Wiley & Sons. This book was released on 2006-04-20 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: The skills and guidance needed to master RTL hardware design This book teaches readers how to systematically design efficient, portable, and scalable Register Transfer Level (RTL) digital circuits using the VHDL hardware description language and synthesis software. Focusing on the module-level design, which is composed of functional units, routing circuit, and storage, the book illustrates the relationship between the VHDL constructs and the underlying hardware components, and shows how to develop codes that faithfully reflect the module-level design and can be synthesized into efficient gate-level implementation. Several unique features distinguish the book: * Coding style that shows a clear relationship between VHDL constructs and hardware components * Conceptual diagrams that illustrate the realization of VHDL codes * Emphasis on the code reuse * Practical examples that demonstrate and reinforce design concepts, procedures, and techniques * Two chapters on realizing sequential algorithms in hardware * Two chapters on scalable and parameterized designs and coding * One chapter covering the synchronization and interface between multiple clock domains Although the focus of the book is RTL synthesis, it also examines the synthesis task from the perspective of the overall development process. Readers learn good design practices and guidelines to ensure that an RTL design can accommodate future simulation, verification, and testing needs, and can be easily incorporated into a larger system or reused. Discussion is independent of technology and can be applied to both ASIC and FPGA devices. With a balanced presentation of fundamentals and practical examples, this is an excellent textbook for upper-level undergraduate or graduate courses in advanced digital logic. Engineers who need to make effective use of today's synthesis software and FPGA devices should also refer to this book.