Download or read book Interactive Curves and Surfaces written by Alyn Rockwood and published by Morgan Kaufmann. This book was released on 1996-08 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing importance of animation and 3D design has caused computer-aided geometric design (CAGD) to be of interest to a wide audience of programmers and designers. This interactive software/book tutorial teaches fundamental CAGD concepts and discusses the growing number of applications in such areas as geological modeling, molecular modeling, commercial advertising, and animation. Using interactive examples and animations to illustrate the mathematical concepts, this hands-on multimedia tutorial enables users without a substantial mathematical background to quickly gain intuition about CAGD. Interactive Curves and Surfaces guides you in Learning the uses of CAGD as it is applied in computer graphics and engineering. Creating curved lines and surfaces using Bezier curves, B-Splines, and parametric surface patches. Understanding the mathematical tools behind the generation of these objects, and the development of computer-based CAGD algorithms. Experimenting with powerful interactive test benches to explore the behavior and characteristics of the most popular CAGD curves. Application oriented readers will find this animated tutorial presentation more accessible than the standard formal texts on the subject.
Download or read book Curves and Surfaces written by Jean-Daniel Boissonnat and published by Springer. This book was released on 2012-01-06 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the thoroughly refereed post-conference proceedings of the 7th International Conference on Curves and Surfaces, held in Avignon, in June 2010. The conference had the overall theme: "Representation and Approximation of Curves and Surfaces and Applications". The 39 revised full papers presented together with 9 invited talks were carefully reviewed and selected from 114 talks presented at the conference. The topics addressed by the papers range from mathematical foundations to practical implementation on modern graphics processing units and address a wide area of topics such as computer-aided geometric design, computer graphics and visualisation, computational geometry and topology, geometry processing, image and signal processing, interpolation and smoothing, scattered data processing and learning theory and subdivision, wavelets and multi-resolution methods.
Download or read book Modeling of Curves and Surfaces with MATLAB written by Vladimir Rovenski and published by Springer Science & Business Media. This book was released on 2010-06-10 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text on geometry is devoted to various central geometrical topics including: graphs of functions, transformations, (non-)Euclidean geometries, curves and surfaces as well as their applications in a variety of disciplines. This book presents elementary methods for analytical modeling and demonstrates the potential for symbolic computational tools to support the development of analytical solutions. The author systematically examines several powerful tools of MATLAB® including 2D and 3D animation of geometric images with shadows and colors and transformations using matrices. With over 150 stimulating exercises and problems, this text integrates traditional differential and non-Euclidean geometries with more current computer systems in a practical and user-friendly format. This text is an excellent classroom resource or self-study reference for undergraduate students in a variety of disciplines.
Download or read book Curves and Surfaces in Geometric Modeling written by Jean H. Gallier and published by Morgan Kaufmann. This book was released on 2000 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Curves and Surfaces in Geometric Modeling: Theory and Algorithms offers a theoretically unifying understanding of polynomial curves and surfaces as well as an effective approach to implementation that you can apply to your own work as a graduate student, scientist, or practitioner." "The focus here is on blossoming - the process of converting a polynomial to its polar form - as a natural, purely geometric explanation of the behavior of curves and surfaces. This insight is important for more than just its theoretical elegance - the author demonstrates the value of blossoming as a practical algorithmic tool for generating and manipulating curves and surfaces that meet many different criteria. You'll learn to use this and other related techniques drawn from affine geometry for computing and adjusting control points, deriving the continuity conditions for splines, creating subdivision surfaces, and more." "It will be an essential acquisition for readers in many different areas, including computer graphics and animation, robotics, virtual reality, geometric modeling and design, medical imaging, computer vision, and motion planning."--BOOK JACKET.Title Summary field provided by Blackwell North America, Inc. All Rights Reserved
Download or read book Curves and Surfaces for CAGD written by Gerald E. Farin and published by Morgan Kaufmann. This book was released on 2002 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface -- Chapter 1 P. B̌ezier: How a Simple System Was Born -- Chapter 2 Introductory Material -- Chapter 3 Linear Interpolation -- Chapter 4 The de Casteljau Algorithm -- Chapter 5 The Bernstein Form of a B̌ezier Curve -- Chapter 6 B̌ezier Curve Topics -- Chapter 7 Polynomial Curve Constructions -- Chapter 8 B-Spline Curves -- Chapter 9 Constructing Spline Curves -- Chapter 10 W. Boehm: Differential Geometry I -- Chapter 11 Geometric Continuity -- Chapter 12 ConicSections -- Chapter 13 Rational B̌ezier and B-Spline Curves -- Chapter 14 Tensor Product Patches -- Chapter 15 Constructing Polynomial Patches -- Chapter 16 Composite Surfaces -- Chapter 17 B̌ezier Triangles -- Chapter 18 Practical Aspects of B̌ezier Triangles -- Chapter 19 W. Boehm: Differential Geometry II -- Chapter 20 GeometricContinuityforSurfaces -- Chapter 21 Surfaces with Arbitrary Topology -- Chapter 22 Coons Patches -- Chapter 23 Shape -- Chapter 24 Evaluation of Some Methods -- Appendix A Quick Reference of Curve ...
Download or read book Computer Aided Geometric Design written by Robert E. Barnhill and published by Academic Press. This book was released on 2014-05-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Geometric Design covers the proceedings of the First International Conference on Computer Aided Geometric Design, held at the University of Utah on March 18-21, 1974. This book is composed of 15 chapters and starts with reviews of the properties of surface patch equation and the use of computers in geometrical design. The next chapters deal with the principles of smooth interpolation over triangles and without twist constraints, as well as the graphical representation of surfaces over triangles and rectangles. These topics are followed by discussions of the B-spline curves and surfaces; mathematical and practical possibilities of UNISURF; nonlinear splines; and some piecewise polynomial alternatives to splines under tension. Other chapters explore the smooth parametric surfaces, the space curve as a folded edge, and the interactive computer graphics application of the parametric bi-cubic surface to engineering design problems. The final chapters look into the three-dimensional human-machine communication and a class of local interpolating splines. This book will prove useful to design engineers.
Download or read book Modeling of Curves and Surfaces in CAD CAM written by Mamoru Hosaka and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 Aims and Features of This Book The contents of t. his book were originally planned t. o be included in a book en titled Geometric lIIodeling and CAD/CAM to be written by M. Hosaka and F. Kimura, but since the draft. of my part of the book was finished much earlier than Kimura's, we decided to publish this part separately at first. In it, geometrically oriented basic methods and tools used for analysis and synthesis of curves and surfaces used in CAD/CAM, various expressions and manipulations of free-form surface patches and their connection, interference as well as their qualit. y eval uation are treated. They are important elements and procedures of geometric models. And construction and utilization of geometric models which include free-form surfaces are explained in the application examples, in which the meth ods and the techniques described in this book were used. In the succeeding book which Kimura is to write, advanced topics such as data structures of geometric models, non-manifold models, geometric inference as well as tolerance problems and product models, process planning and so on are to be included. Conse quently, the title of this book is changed to Modeling of Curves and Surfaces in CAD/CAM. Features of this book are the following. Though there are excellent text books in the same field such as G. Farin's Curves and Surfaces for CAD /CAM[l] and C. M.
Download or read book Interactive Curve Modeling written by Muhammad Sarfraz and published by Springer Science & Business Media. This book was released on 2007-10-24 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers Curve Modeling with solutions to real life problems relating to Computer Graphics, Vision, Image Processing, Geometric Modeling and CAD/CAM. Chapters deal with basic concepts, curve design techniques and their use to various applications and a wide range of problems with their automated solutions through computers. The book provides an invaluable resource which focuses on interdisciplinary methods and affiliates up-to-date methodologies. It aims to stimulate provide a source where the reader can find the latest developments in the field including a variety of techniques, applications, and systems necessary for solving real life problems.
Download or read book Curves and Surfaces for Computer Aided Geometric Design written by Gerald Farin and published by Elsevier. This book was released on 2014-06-28 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: A leading expert in CAGD, Gerald Farin covers the representation, manipulation, and evaluation of geometric shapes in this the Third Edition of Curves and Surfaces for Computer Aided Geometric Design. The book offers an introduction to the field that emphasizes Bernstein-Bezier methods and presents subjects in an informal, readable style, making this an ideal text for an introductory course at the advanced undergraduate or graduate level. The Third Edition includes a new chapter on Topology, offers new exercises and sections within most chapters, combines the material on Geometric Continuity into one chapter, and updates existing materials and references. Implementation techniques are addressed for practitioners by the inclusion of new C programs for many of the fundamental algorithms. The C programs are available on a disk included with the text. System Requirements: IBM PC or compatibles, DOS version 2.0 or higher. Covers representation, manipulation, and evaluation of geometric shapes Emphasizes Bernstein-Bezier methods Written in an informal, easy-to-read style
Download or read book Curves and Surfaces for Computer Graphics written by David Salomon and published by Springer Science & Business Media. This book was released on 2007-03-20 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Requires only a basic knowledge of mathematics and is geared toward the general educated specialists. Includes a gallery of color images and Mathematica code listings.
Download or read book Differential Geometry of Curves and Surfaces written by Thomas F. Banchoff and published by CRC Press. This book was released on 2016-04-05 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Differential Geometry of Curves and Surfaces, Second Edition takes both an analytical/theoretical approach and a visual/intuitive approach to the local and global properties of curves and surfaces. Requiring only multivariable calculus and linear algebra, it develops students' geometric intuition through interactive computer graphics applets suppor
Download or read book Curves and Surfaces in Computer Aided Geometric Design written by Fujio Yamaguchi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains various types of mathematical descriptions of curves and surfaces, such as Ferguson, Coons, Spline, Bézier and B-spline curves and surfaces. The materials are classified and arranged in a unified way so that beginners can easily understand the whole spectrum of parametric curves and surfaces. This book will be useful to many researchers, designers, teachers, and students who are working on curves and surfaces. The book can be used as a textbook in computer aided design classes.
Download or read book Mathematical Methods for Curves and Surfaces written by Morten Dæhlen and published by Springer. This book was released on 2010-02-12 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the thoroughly refereed post-conference proceedings of the 7th International Conference on Mathematical Methods for Curves and Surfaces, MMCS 2008, held in Tønsberg, Norway, in June/July 2008. The 28 revised full papers presented were carefully reviewed and selected from 129 talks presented at the conference. The topics addressed by the papers range from mathematical analysis of various methods to practical implementation on modern graphics processing units.
Download or read book The NURBS Book written by Les Piegl and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently B-spline curves and surfaces (NURBS) were principally of interest to the computer aided design community, where they have become the standard for curve and surface description. Today we are seeing expanded use of NURBS in modeling objects for the visual arts, including the film and entertainment industries, art, and sculpture. NURBS are now also being used for modeling scenes for virtual reality applications. These applications are expected to increase. Consequently, it is quite appropriate for The.N'URBS Book to be part of the Monographs in Visual Communication Series. B-spline curves and surfaces have been an enduring element throughout my pro fessional life. The first edition of Mathematical Elements for Computer Graphics, published in 1972, was the first computer aided design/interactive computer graph ics textbook to contain material on B-splines. That material was obtained through the good graces of Bill Gordon and Louie Knapp while they were at Syracuse University. A paper of mine, presented during the Summer of 1977 at a Society of Naval Architects and Marine Engineers meeting on computer aided ship surface design, was arguably the first to examine the use of B-spline curves for ship design. For many, B-splines, rational B-splines, and NURBS have been a bit mysterious.
Download or read book Differential Geometry of Curves and Surfaces written by Thomas F. Banchoff and published by CRC Press. This book was released on 2010-03-01 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Students and professors of an undergraduate course in differential geometry will appreciate the clear exposition and comprehensive exercises in this book that focuses on the geometric properties of curves and surfaces, one- and two-dimensional objects in Euclidean space. The problems generally relate to questions of local properties (the properties
Download or read book Differential Geometry of Curves and Surfaces written by Thomas F. Banchoff and published by CRC Press. This book was released on 2022-08-05 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through two previous editions, the third edition of this popular and intriguing text takes both an analytical/theoretical approach and a visual/intuitive approach to the local and global properties of curves and surfaces. Requiring only multivariable calculus and linear algebra, it develops students’ geometric intuition through interactive graphics applets. Applets are presented in Maple workbook format, which readers can access using the free Maple Player. The book explains the reasons for various definitions while the interactive applets offer motivation for definitions, allowing students to explore examples further, and give a visual explanation of complicated theorems. The ability to change parametric curves and parametrized surfaces in an applet lets students probe the concepts far beyond what static text permits. Investigative project ideas promote student research. At users of the previous editions' request, this third edition offers a broader list of exercises. More elementary exercises are added and some challenging problems are moved later in exercise sets to assure more graduated progress. The authors also add hints to motivate students grappling with the more difficult exercises. This student-friendly and readable approach offers additional examples, well-placed to assist student comprehension. In the presentation of the Gauss-Bonnet Theorem, the authors provide more intuition and stepping-stones to help students grasp phenomena behind it. Also, the concept of a homeomorphism is new to students even though it is a key theoretical component of the definition of a regular surface. Providing more examples show students how to prove certain functions are homeomorphisms.
Download or read book CRC Standard Curves and Surfaces with Mathematica written by David H. von Seggern and published by CRC Press. This book was released on 2017-07-12 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of this book’s bestselling predecessor, Mathematica® has matured considerably and the computing power of desktop computers has increased greatly. The Mathematica® typesetting functionality has also become sufficiently robust that the final copy for this edition could be transformed directly from Mathematica R notebooks to LaTex input. Incorporating these aspects, CRC Standard Curves and Surfaces with Mathematica®, Third Edition is a virtual encyclopedia of curves and functions that depicts nearly all of the standard mathematical functions and geometrical figures in use today. The overall format of the book is largely unchanged from the previous edition, with function definitions and their illustrations presented closely together. New to the Third Edition: A new chapter on Laplace transforms New curves and surfaces in almost every chapter Several chapters that have been reorganized Better graphical representations for curves and surfaces throughout A CD-ROM, including the entire book in a set of interactive CDF (Computable Document Format) files The book presents a comprehensive collection of nearly 1,000 illustrations of curves and surfaces often used or encountered in mathematics, graphics design, science, and engineering fields. One significant change with this edition is that, instead of presenting a range of realizations for most functions, this edition presents only one curve associated with each function. The graphic output of the Manipulate function is shown exactly as rendered in Mathematica, with the exact parameters of the curve’s equation shown as part of the graphic display. This enables readers to gauge what a reasonable range of parameters might be while seeing the result of one particular choice of parameters.
