Download or read book Integration of Robots into CIM written by Roger Bernard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: From its inception in 1983, ESPRIT (the European Strategic Programme for Research and Development in Information Technology) has aimed at improving the competitiveness of European industry and providing it with the technology needed for the 1990s. Esprit Project 623, on which most of the work presented in this book is based, was one of the key projects in the ESPRIT area, Computer Integrated Manufacturing (CIM). From its beginnings in 1985, it brought together a team of researchers from industry, research institutes and universities to explore and develop a critical stream of advanced manufacturing technology that would be timely and mature for industrial exploitation in a five year time frame. The synergy of cross border collaboration between technology users and vendors has led to results ranging from new and improved products to training courses given at universities. The subject of Esprit Project 623 was the integration of robots into manufacturing environments. Robots are a vital element in flexible automation and can contribute substantially to manufacturing efficiency. The project had two main themes, off-line programming and robot system planning. Off-line programming enlarges the application area of robots and opens up new possibilities in domains such as laser cutting, and other hazardous operations. Reported benefits obtained from off-line program ming include: - significant cost reductions because re-programming eliminates robot down-time; - faster production cycles, in some cases time-savings of up to 85% are reported; - the optimal engineering of products with improved quality.
Download or read book Integration of Robots Into CIM written by R Bernhardt and published by . This book was released on 1991-12-31 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Robotics in CIM Systems written by James A. Rehg and published by Pearson. This book was released on 2003 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written from a manufacturing perspective, this book takes readers step-by-step through the theory and application techniques of designing and building a robot-driven automated work cell from selection of hardware through programming of the devices to economic justification of the project. All-inclusive in approach, it covers not only robot automation, but all the other technology needed in the automated work cell to integrate the robot with the work environment and with the enterprise data base. Robot and other required automation hardware and software are introduced in the order in which they would be selected in an actual industrial automation design. Includes system troubleshooting guides, case studies problems, and worked example problems. Robot Classification. Automated Work Cells and CIM Systems. End-of-Arm Tooling. Automation Sensors. Work-Cell Support Systems. Robot and System Integration. Work-Cell Programming. Justification and Applications of Work Cells. Safety. Human Interface: Operator Training, Acceptance, and Problems. For those interested in Robotics and Manufacturing Automation or Production Design. "
Download or read book Integration of Robots Into CIM written by Rolf Bernhardt and published by . This book was released on 1992 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integration of Robots into CIM written by R. Dillman and published by Springer Science & Business Media. This book was released on 1992 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: From its inception in 1983, ESPRIT (the European Strategic Programme for Research and Development in Information Technology) has aimed at improving the competitiveness of European industry and providing it with the technology needed for the 1990s. Esprit Project 623, on which most of the work presented in this book is based, was one of the key projects in the ESPRIT area, Computer Integrated Manufacturing (CIM). From its beginnings in 1985, it brought together a team of researchers from industry, research institutes and universities to explore and develop a critical stream of advanced manufacturing technology that would be timely and mature for industrial exploitation in a five year time frame. The synergy of cross border collaboration between technology users and vendors has led to results ranging from new and improved products to training courses given at universities. The subject of Esprit Project 623 was the integration of robots into manufacturing environments. Robots are a vital element in flexible automation and can contribute substantially to manufacturing efficiency. The project had two main themes, off-line programming and robot system planning. Off-line programming enlarges the application area of robots and opens up new possibilities in domains such as laser cutting, and other hazardous operations. Reported benefits obtained from off-line program ming include: - significant cost reductions because re-programming eliminates robot down-time; - faster production cycles, in some cases time-savings of up to 85% are reported; - the optimal engineering of products with improved quality.
Download or read book Introduction to Robotics in CIM Systems written by James A. Rehg and published by . This book was released on 1992 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CIM Mechanical Aspects written by Gareth Evans and published by Elsevier. This book was released on 2013-10-22 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: CIM - Mechanical Aspects: State of the Art Report contains different points of view about computer-integrated manufacturing (CIM). This report is organized into three parts: invited papers, analysis, and bibliography. The invited papers part examines various mechanical aspects of CIM. The analysis part assesses the major advances and provides a balanced analysis of the state of the art in CIM. Bibliography compiles the most important published material on the subject of mechanical aspects of CIM.
Download or read book ESPRIT 90 written by CEC, DG for Telecommunications and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1990 ESPRIT Conferene is being held in Brussels from the 12th November to the 15th November. Well over 1700 participants from all over Europe and overseas are expected to attend the various events. The Conference will offer the opportunity to be updated on the results ofthe ESPRITprojects and Basic Research actions andto develop international contacts with colleagues, both within a specific branch of Information Technology and across different branches. The first three days of the Conference are devoted to presentations of Esprit projects and Basic Research actions structured into plenary and parallel sessions; the scope of the Conference has been broadened this year by the inclusion of several well-known international speakers. All areas of Esprit work are covered: Microelectronics, Information Processing Systems, Office and Business Systems, Computer Integrated Manufacturing, Basic Research and aspects of the Information Exchange System. During the IT Forum on Thursday November 15th, major European industrial and political decision-makers will address the audience in the morning. In the afternoon, a Round Table will discuss the impact of Information Technology on society. More than 100 projects and actions will display their major innovations and achieve ments at the Esprit Exhibition which will be, for the first time, open to the general public.
Download or read book Handbook of Industrial Robotics written by Shimon Y. Nof and published by John Wiley & Sons. This book was released on 1999-03-02 with total page 1388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrieroboter gehoren heute zum Alltag. In den letzten zehn Jahren verlagerte sich der Schwerpunkt der Neuentwicklungen weg von den Robotern selbst, hin zu alternativen Formen der kunstlichen Intelligenz, mit denen die Gerate ausgestattet werden. Dem Rechnung tragend, beschaftigt sich die zweite Auflage dieses Handbuchs vor allem mit Anwendungen und Strategien zur Problemlosung in der Industrie. Angesprochen werden Themen wie Graphiksimulatoren, objektorientierte Software, Kommunikationssysteme und Mikro- und Nanoroboter. (04/99)
Download or read book The World Yearbook of Robotics Research and Development written by Sbornik Statei and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: How quickly the technological 'flavour of the month' changes. At the beginning of the 1980's many saw 'robotics' as being something of a pana cea for those problems in the manufacturing industries which had been exacerbated by the world recession. Those working at the time in the field of robotics stressed that robots themselves were only part of the solution. Yet in many quarters the 'hype' for the new technology apparently knew few bounds, resulting, inexorably, in many industries painfully discover ing for themselves a new realism, closely followed by disillusionment. In its wider sense the term 'robotics' covers an extremely broad spec trum of technologies ranging from extremely flexible, highly sensory and integrated systems capable of handling a very diverse product range, through to comparatively inflexible, high volume systems which can merely handle slightly different variations of the same basic product. As a result of the one 'buzzword' referring to such a variety of actual system types, the disillusionment which started to become apparent during the early 1980's acted as something of a double edged sword. A given com pany might consider a particular robotics-based technological solution to its production problems, find that it was unsuitable, and so renounce all robotics approaches as inappropriate. Yet just because one position on that spectrum of technological solutions was unsuitable for the company should not have led them to assume that there was no other robotics solu tion that was appropriate.
Download or read book Computer Integrated Manufacturing written by R.U. Ayres and published by Springer Science & Business Media. This book was released on 1991-07-31 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: CIM (computer integrated manufacturing) is an acronym that has become fairly well known in recent years in manufacturing and related engineering circles. The purpose of the CIM Project at IIASA is to close the widening gap between the pace of technological, economic, and social events, on the one hand, and the progress of understanding those events, on the other.
Download or read book Computer Applications in Production Engineering written by Qiangnan Sun and published by Springer. This book was released on 2016-02-02 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reviews the latest global research results in computer applications. The book contains a selection of papers presented at the Fifth International Conference on Computer Applications in Production and Engineering, arranged by the International Federation for Information Processing and held in Beijing, China in May 1995.
Download or read book Advances in Factories of the Future CIM and Robotics written by M. Cotsaftis and published by Elsevier. This book was released on 2013-10-22 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Productivity enhancement is a major concern for all manufacturing enterprises. Productivity enhancement can be achieved in many ways and many facets of its problems have been investigated over the last decades. A number of methods, tools and technologies have emerged to efficiently increase productivity and rationalize management of manufacturing enterprises. International experts from both academia and industry share their experiences in this collection of articles, contributing to the latest advances in the many facets of productivity enhancement in manufacturing enterprises. Themes and visions are detailed on factories of the future, new management approaches, manufacturing system integration and manufacturing information systems. These technical areas can be grouped into four major sections: Factories of the future; Techniques and tools for automated manufacturing; Robotics; and Industrial applications. The papers illustrate a pattern of valuable and interesting approaches to the fascinating problem of designing a new generation of robots with high enough performance capabilities to be used in an industrial context.
Download or read book Robot Control 1988 SYROCO 88 written by U. Rembold and published by Elsevier. This book was released on 2014-05-23 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing 88 papers, the emphasis of this volume is on the control of advanced robots. These robots may be self-contained or part of a system. The applications of such robots vary from manufacturing, assembly and material handling to space work and rescue operations. Topics presented at the Symposium included sensors and robot vision systems as well as the planning and control of robot actions. Main topics covered include the design of control systems and their implementation; advanced sensors and multisensor systems; explicit robot programming; implicit (task-orientated) robot programming; interaction between programming and control systems; simulation as a programming aid; AI techniques for advanced robot systems and autonomous robots.
Download or read book Multiple Approaches to Intelligent Systems written by Ibrahim F. Imam and published by Springer. This book was released on 2004-05-19 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: We never create anything, We discover and reproduce. The Twelfth International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems has a distinguished theme. It is concerned with bridging the gap between the academic and the industrial worlds of Artificial Intelligence (AI) and Expert Systems. The academic world is mainly concerned with discovering new algorithms, approaches, and methodologies; however, the industrial world is mainly driven by profits, and concerned with producing new products or solving customers’ problems. Ten years ago, the artificial intelligence research gap between academia and industry was very broad. Recently, this gap has been narrowed by the emergence of new fields and new joint research strategies in academia. Among the new fields which contributed to the academic-industrial convergence are knowledge representation, machine learning, searching, reasoning, distributed AI, neural networks, data mining, intelligent agents, robotics, pattern recognition, vision, applications of expert systems, and others. It is worth noting that the end results of research in these fields are usually products rather than empirical analyses and theoretical proofs. Applications of such technologies have found great success in many domains including fraud detection, internet service, banking, credit risk and assessment, telecommunication, etc. Progress in these areas has encouraged the leading corporations to institute research funding programs for academic institutes. Others have their own research laboratories, some of which produce state of the art research.
Download or read book Robotics in Alpe Adria Region written by Peter Kopacek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial robots as a kind of a mechatronic system were the objects for intensive scientific research in the last years. Kinematics and kinetics, advanced control algorithms, flexible robots, mobile robots, cooperation of robots were research topics. Meanwhile the industrial robot is more or less a tool on the shop floor level like NC- and CNC-machines, transportation and storage devices. The current research landscape on industrial robots can be divided in two directions. The first direction is the scientific one and topics like fuzzy control, applications of neuronal networks, application of methods of artificial intelligence for robot control, optimal path planning are currently headlines in this field. On the other hand the application oriented research goes in the direction to develop and create new low-cost concepts including industrial robots applicable in a commercially efficient way mainly in small and medium sized companies. The industry in most of the member countries of the Alpe-Adria Group are dominated by small and medium sized companies. Industrial robots together with the appropriate CIM-concepts are a very efficient tool for increasing the flexibility of such companies. At the first meeting in Portoroz (June 1992), a first overview on robotics research and applications in Alpe-Adria countries was given. First steps were done in the direction of a broader cooperation in science, development, production and level of education among these countries.
Download or read book Intelligent Systems for Manufacturing written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2013-06-29 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Towards Intelligent Manufacturing Systems This book contains the selected articles from the third International Conference on lriformation Technology for Balanced Automation Systems in Manufacturing. A rapid evolution in a number of areas leading to Intelligent Manufacturing Systems has been observ@d in recent years. Significant efforts are being spent on this research area, namely in terms of international cooperative projects, like the IMS initiative, the USA NIIIP (National Industrial Information Infrastructure Protocols) project, or the European ESPRIT programme, and a growing number of conferences and workshops. The importance of the Information and Communication Technologies in the manufacturing area is weIl established today. The proper combination of these areas with the socio-organizational issues, supported by intelligent tools, is however, more difficult to achieve, and fully justifies the need for the BASYS conference and the publication of the series of books on Balanced Automation SyStems. The first book of this series focused on the topic of "Architectures and Design Methods", was published in 1995. Mahy of the fundamental aspects of manufacturing, and some preliminary results were presented in this book. Among others, the topics included: Modeling and design of FMS, Enterprise modeling and organization, Decision support systems in manufacturing, Anthropocentric systems, CAE/CAD/CAM integration, Scheduling systems, Extended enterprises, Multi agent system architecture, Balanced flexibility, Intelligent supervision systems, Shop-floor control, and Computer aided process planning.
