Download or read book Integration of Physico chemical and Biological Wastewater Treatment Process written by Research Program for the Abatement of Municipal Pollution (Canada) and published by . This book was released on 1973 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integration of Physico chemical and Biological Wastewater Treatment Processes written by W. R. Dryman and published by Environment Canada : obtained from Training and Technology Transfer Division (Water), Environmental Protection Service, Environment Canada. This book was released on 1974* with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integration of Physico chemical and Biological Wastewater Treatment Processes written by Canada. Dept. of the Environment. Environmental Protection Service and published by . This book was released on 1973 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combined Application of Physico Chemical Microbiological Processes for Industrial Effluent Treatment Plant written by Maulin Shah and published by Springer Nature. This book was released on 2020-03-30 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent decades, scientific insight into the chemistry of water has increased enormously, leading to the development of advanced wastewater and water purification technologies. However, the quality of freshwater resources has continually deteriorated worldwide, both in industrialized and developing countries. Although traditional wastewater technologies focus on the removal of suspended solids, nutrients and bacteria, hundreds of organic pollutants occur in wastewater and urban surface waters. These new pollutants are synthetic or naturally occurring chemicals that are not often monitored in the environment but have the potential to enter the environment and cause known or suspected adverse ecological and / or human health effects. Collectively referred to as the "emerging contaminants," they are mostly derived from domestic use and occur in trace concentrations ranging from pico to micrograms per liter. Environmental contaminants are resistant to conventional wastewater treatment processes and most of them remain unaffected, leading to the contamination of the receiving water. As such, there is a need for advanced wastewater treatment process that is capable of removing environmental contaminants to ensure safe fresh water supplies. This book explains the biological and chemical wastewater treatment technologies. The biological wastewater treatment processes presented include: (1) bioremediation of wastewater such as aerobic and anaerobic treatment; (2) phytoremediation of wastewater using engineered wetlands, rhizofiltration, rhizodegradation, phytodegradation, phytoaccumulation, phytotransformation and hyperaccumulators; and (3) mycoremediation of wastewater. The chemical wastewater treatment processes discussed include chemical precipitation, ion exchange, neutralization, adsorption and disinfection. In addition, the book describes wastewater treatment plants in terms of plant size, layout and design as well as installation location. Also presenting the latest, innovative effluent water treatment processes, it is a valuable resource for biochemical and wastewater treatment engineers, environmental scientists and environmental microbiologists.
Download or read book Fundamentals of Biological Wastewater Treatment written by Udo Wiesmann and published by John Wiley & Sons. This book was released on 2007-02-27 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise introduction to the fundamentals of biological treatment of wastewater describes how to model and integrate biological steps into industrial processes. The book first covers the chemical, physical and biological basics, including wastewater characteristics, microbial metabolism, determining stoichiometric equations for catabolism and anabolism, measurements of mass transfer and respiration rates and the aerobic treatment of wastewater loaded with dissolved organics. It the moves on to deal with such applications and technologies as nitrogen and phosphorus removal, membrane technology, the assessment and selection of aeration systems, simple models for biofilm reactors and the modeling of activated sludge processes. A final section looks at the processing of water and the treatment of wastewater integrated into the production process. Essential reading for chemists, engineers, microbiologists, environmental officers, agencies and consultants, in both academia and industry.
Download or read book Integrated and Hybrid Process Technology for Water and Wastewater Treatment written by Abdul Wahab Mohammad and published by Elsevier. This book was released on 2021-08-25 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tackling the issue of water and wastewater treatment nowadays requires novel approaches to ensure that sustainable development can be achieved. Water and wastewater treatment should not be seen only as an end-of-pipe solution but instead the approach should be more holistic and lead to a more sustainable process. This requires the integration of various methods/processes to obtain the most optimized design. Integrated and Hybrid Process Technology for Water and Wastewater Treatment discusses the state-of-the-art development in integrated and hybrid treatment processes and their applications to the treatment of a vast variety of water and wastewater sources. The approaches taken in this book are categorized as (i) resources recovery and consumption, (ii) optimal performance, (iii) physical and environmental footprints, (iv) zero liquid discharge concept and are (v) regulation-driven. Through these categories, readers will see how such an approach could benefit the water and wastewater industry. Each chapter discusses challenges and prospects of an integrated treatment process in achieving sustainable development. This book serves as a platform to provide ideas and to bridge the gap between laboratory-scale research and practical industry application. Includes comprehensive coverage on integrated and hybrid technology for water and wastewater treatment Takes a new approach in looking at how water and wastewater treatment contributes to sustainable development Provides future direction of research in sustainable water and wastewater treatment
Download or read book Advanced Biological Treatment Processes for Industrial Wastewaters written by Francisco J. Cervantes and published by IWA Publishing. This book was released on 2006-06-30 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Biological Treatment Processes for Industrial Wastewaters provides unique information relative to both the principles and applications of biological wastewater treatment systems for industrial effluents. Case studies document the application of biological wastewater treatment systems in different industrial sectors such as chemical, petrochemical, food-processing, mining, textile and fermentation. With more than 70 tables, 100 figures, 200 equations and several illustrations, the book provides a broad and deep understanding of the main aspects to consider during the design and operation of industrial wastewater treatment plants. Students, researchers and practitioners dealing with the design and application of biological systems for industrial wastewater treatment will find this book invaluable.
Download or read book Physical Chemical and Biological Treatment Processes for Water and Wastewater written by Tushar Kanti Sen and published by Nova Science Publishers. This book was released on 2015-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water pollution occurs when toxic pollutants of varying kinds (organic, inorganic, radioactive and so on) are directly or indirectly discharged into water bodies without adequate treatment to remove such potential pollutants. Today's sources of these potential pollutants, which cause high deterioration of freshwater quality, are city sewage and industrial waste discharge, human agricultural practices, industrial waste disposal practices, mining activities, civil and structural work activities and obviously natural contamination with climate change. When our water is polluted, it is not only devastating to the environment but also to human health. Therefore, development of water and wastewater treatment processes to alleviate water pollution has been a challenging and demanding task for engineers, scientists and researchers. Perhaps this is even more challenging for underdeveloped and developing countries, where water and wastewater treatment facilities, knowledge and infrastructure are limited. Water and wastewater treatment processes are broad and often multidisciplinary in nature, comprising a mixture of research areas including physical, chemical and biological methods to remove or transform various potential pollutants. This is in hopes to achieve acceptable water quality and satisfy governmental and environmental protection agencies' laws and regulations. With these objectives, this book has been written in order to provide various research results and compilation and up-to-date development on the current states of knowledge and techniques in the broad field of water and wastewater treatment processes. Basically, this book will give a comprehensive understanding and advancement and application of various physical, chemical and biological treatment methods in the reduction of potential pollutants (inorganics/organics) from water and wastewater. There are a total 18 book chapters contributed by large number of expert authors around the world, covering the following main research areas: Physical, chemical and biological water treatment processes such as adsorption, biosorption, coagulation/flocculation, electrocoagulation, denitration, membrane filtration/separation, photo-catalytic reduction, advanced oxidation, nutrients removal by struvite crystallisation and nanotechnology; Physical, chemical and biological methods for municipal wastewater and industrial wastewater treatment plants such as primary-secondary sludge treatments, anaerobic digestions, aerobic treatment, activated sludge processes, dewaterability by flocculants, pre-treatments of sludge and rheology of sludge in wastewater treatment; Various operational units/equipment and process control of wastewater treatment plant.
Download or read book Physico Chemical Wastewater Treatment and Resource Recovery written by Robina Farooq and published by BoD – Books on Demand. This book was released on 2017-05-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book on Physico-Chemical Treatment of Wastewater and Resource Recovery provides an efficient and low-cost solution for remediation of wastewater. This book focuses on physico-chemical treatment via advanced oxidation process, adsorption, its management and recovery of valuable chemicals. It discusses treatment and recovery process for the range of pollutants including BTX, PCB, PCDDs, proteins, phenols, antibiotics, complex organic compounds and metals. The occurrence of persistent pollutants poses deleterious effects on human and environmental health. Simple solutions for recovery of valuable chemicals and water during physico-chemical treatment of wastewater are discussed extensively. This book provides necessary knowledge and experimental studies on emerging physico-chemical processes for reducing water pollution and resource recovery.
Download or read book Mathematical Modeling of Integrated Biological and Physico chemical Treatment Process for Industrial Wastewater written by Sung-Hyun Kim and published by . This book was released on 1987 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physicochemical Treatment Processes written by Lawrence K. Wang and published by Springer Science & Business Media. This book was released on 2007-11-13 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past 30 years have seen the emergence of a growing desire worldwide to take positive actions to restore and protect the environment from the degrading effects of all forms of pollution: air, noise, solid waste, and water. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste exists, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identified: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? The principal intention of the Handbook of Environmental Engineering series is to help readers formulate answers to the last two questions. The traditional approach of applying tried-and-true solutions to specific pollution pr- lems has been a major contributing factor to the success of environmental engineering, and has accounted in large measure for the establishment of a “methodology of pollution c- trol. ” However, realization of the ever-increasing complexity and interrelated nature of current environmental problems makes it imperative that intelligent planning of pollution abatement systems be undertaken.
Download or read book Waste Water Treatment Technologies Volume II written by Saravanamuthu Vigneswaran and published by EOLSS Publications. This book was released on 2009-09-25 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water and Wastewater Treatment Technologies theme is a component of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The Theme on Water and Wastewater Treatment Technologies deals, in three volumes, and covers several topics, with several issues of great relevance to our world such as: Urban Wastewater Treatment; Characteristics of Effluent Organic Matter in Wastewater; Filtration Technologies in wastewater treatment; Air Stripping in Industrial Wastewater Treatment; Dissolved air flotation in industrial wastewater treatment; Membrane Technology for Organic Removal in Wastewater; Adsorption and Biological Filtration in Wastewater Treatment; Physico-chemical processes for Organic removal from wastewater effluent; Deep Bed Filtration: Modelling Theory And Practice ; Specific options in biological wastewater treatment for reclamation and reuse ; Biological Phosphorus Removal Processes For Wastewater Treatment ; Sequencing Batch Reactors: Principles, Design/Operation And Case Studies ; Wastewater stabilization ponds (WSP)for wastewater treatment; Treatment of industrial wastewater by membrane bioreactors; Stormwater treatment technologies; Sludge Treatment Technologies ; Wastewater Treatment Technology For Tanning Industry; Palm Oil And Palm Waste Potential In Indonesia ; Recirculating Aquaculture Systems – A Review ; Upflow anaerobic sludge blanket (UASB)reactor in wastewater treatment; Applied Technologies In Municipal Solid Waste Landfill Leachate Treatment; Water Mining: Planning and Implementation Issues for a successful project; Assessment methodologies for water reuse scheme and technology; Nanotechnology for Wastewater Treatment. These three volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, Managers, and Decision makers and NGOs.
Download or read book Physical Chemical Treatment of Water and Wastewater written by A. P. Sincero and published by IWA Publishing. This book was released on 2002-07-31 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: The books currently available on this subject contain some elements of physical-chemical treatment of water and wastewater but fall short of giving comprehensive and authoritative coverage. They contain some equations that are not substantiated, offering empirical data based on assumptions that are therefore difficult to comprehend. This text brings together the information previously scattered in several books and adds the knowledge from the author's lectures on wastewater engineering. Physical-Chemical Treatment of Water and Wastewater is not only descriptive but is also analytical in nature. The work covers the physical unit operations and unit processes utilized in the treatment of water and wastewater. Its organization is designed to match the major processes and its approach is mathematical. The authors stress the description and derivation of processes and process parameters in mathematical terms, which can then be generalized into diverse empirical situations. Each chapter includes design equations, definitions of symbols, a glossary of terms, and worked examples. One author is an environmental engineer and a professor for over 12 years and the other has been in the practice of environmental engineering for more than 20 years. They offer a sound analytical mathematical foundation and description of processes. Physical-Chemical Treatment of Water and Wastewater fills a niche as the only dedicated textbook in the area of physical and chemical methods, providing an analytical approach applicable to a range of empirical situations Contents Introduction Characteristics of Water and Wastewater Quantity of Water and Wastewater Constituents of Water and Wastewater Unit Operations of Water and Wastewater Treatment Flow Measurements and Flow and Quality Equalizations Pumping Screening, Settling, and Flotation Mixing and Flocculation Conventional Filtration Advanced Filtration and Carbon Adsorption Aeration, Absorption, and Stripping Unit Processes of Water and Wastewater Treatment Water Softening Water Stabilization Coagulation Removal of Iron and Manganese by Chemical Precipitation Removal of Phosphorus by Chemical Precipitation Removal of Nitrogen by Nitrification-Denitrification Ion Exchange Disinfection
Download or read book Activated Carbon for Water and Wastewater Treatment written by Ferhan Cecen and published by John Wiley & Sons. This book was released on 2011-09-19 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides comprehensive coverage of technologies which integrate adsorption and biological processes in water and wastewater treatment. The authors provide both an introduction to the topic as well as a detailed discussion of theoretical and practical considerations. After a review of the basics involved in the chemistry, biology and technology of integrated adsorption and biological removal, they discuss the setup of pilot- and full-scale treatment facilities, covering powdered as well as granular activated carbon. They elucidate the factors that influence the successful operation of integrated systems. Their discussion on integrated systems expands from the effects of environmental to the removal of various pollutants, to regeneration of activated carbon, and to the analysis of such systems in mathematical terms. The authors conclude with a look at future needs for research and develoment. A truly valuable resource for environmental engineers, environmental and water chemists, as well as professionals working in water and wastewater treatment.
Download or read book Combined Application of Physico chemical and Microbiological Processes for Industrial Effluent Treatment Plant written by and published by . This book was released on 2020 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent decades, scientific insight into the chemistry of water has increased enormously, leading to the development of advanced wastewater and water purification technologies. However, the quality of freshwater resources has continually deteriorated worldwide, both in industrialized and developing countries. Although traditional wastewater technologies focus on the removal of suspended solids, nutrients and bacteria, hundreds of organic pollutants occur in wastewater and urban surface waters. These new pollutants are synthetic or naturally occurring chemicals that are not often monitored in the environment but have the potential to enter the environment and cause known or suspected adverse ecological and / or human health effects. Collectively referred to as the "emerging contaminants," they are mostly derived from domestic use and occur in trace concentrations ranging from pico to micrograms per liter. Environmental contaminants are resistant to conventional wastewater treatment processes and most of them remain unaffected, leading to the contamination of the receiving water. As such, there is a need for advanced wastewater treatment process that is capable of removing environmental contaminants to ensure safe fresh water supplies. This book explains the biological and chemical wastewater treatment technologies. The biological wastewater treatment processes presented include: (1) bioremediation of wastewater such as aerobic and anaerobic treatment; (2) phytoremediation of wastewater using engineered wetlands, rhizofiltration, rhizodegradation, phytodegradation, phytoaccumulation, phytotransformation and hyperaccumulators; and (3) mycoremediation of wastewater. The chemical wastewater treatment processes discussed include chemical precipitation, ion exchange, neutralization, adsorption and disinfection. In addition, the book describes wastewater treatment plants in terms of plant size, layout and design as well as installation location. Also presenting the latest, innovative effluent water treatment processes, it is a valuable resource for biochemical and wastewater treatment engineers, environmental scientists and environmental microbiologists.
Download or read book Industrial Water Treatment Process Technology written by Parimal Pal and published by Butterworth-Heinemann. This book was released on 2017-03-31 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Water Treatment Process Technology begins with a brief overview of the challenges in water resource management, covering issues of plenty and scarcity-spatial variation, as well as water quality standards. In this book, the author includes a clear and rigorous exposition of the various water resource management approaches such as: separation and purification (end of discharge pipe), zero discharge approach (green process development), flow management approach, and preservation and control approach. This coverage is followed by deeper discussion of individual technologies and their applications. Covers water treatment approaches including: separation and purification—end of discharge pipe; zero discharge approach; flow management approach; and preservation and control approach Discusses water treatment process selection, trouble shooting, design, operation, and physico-chemical and treatment Discusses industry-specific water treatment processes
Download or read book Wastewater Treatment written by D. G. Rao and published by CRC Press. This book was released on 2012-07-05 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the heterogeneous nature of water streams from diverse domestic and industrial sources, and the equally diverse nature of pollutants that can be physical, chemical, and biological in nature, their treatment methods also must be varied in nature. Responding to this complex situation, Wastewater Treatment: Advanced Processes and Technologies presents important concepts, technologies, and issues, essentially distilling the information into actionable treatment methods for various types of pollutants. Edited by experts in the field, the book explores recent advances in wastewater treatment by various technologies such as chemical methods, biochemical methods, membrane separation techniques, and by application of Fenton and solar photo Fenton methods. It emphasizes new technologies that produce clean water and energy from the wastewater treatment process and addresses sustainable water reclamation, biomembrane treatment processes and advanced oxidation processes for wastewater treatment. The editors and chapter authors judiciously blend coverage of treatment processes and technologies, making the diverse subject matter as comprehensible as possible. They tackle the difficulties of covering the gamut of advanced processes and technologies available concisely, without losing the rigor and details required for the information to be useful and applicable. Equations, figures, photographs, tables, case studies, examples, and references support the information provided in the text. These features combine to make the book an authoritative resource and practical tool for resolving wastewater treatment issues.
