Download or read book Integrated Optics Microstructures and Sensors written by Massood Tabib-Azar and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling the mechanical, electrical, magnetic, and optical properties of materials by advanced fabrication methods (Le. ; Molecular Beam Epitaxy and Metal-Organic Chemical Vapor Deposition) has become the new paradigm in our research era. Sensors, being the most vital part of the electronic data processing and decision making machines, stand to gain the most from engineering of the properties of materials. Microfabrication technology has already contributed significantly to the batch fabrication of micro-sensors with higher over all qualities compared to their counterparts that are fabricated using other methods. Batch fabrication of micro-sensors i) results in more uniform properties of co-fabricated devices, ii) nearly eliminates the need for characterization of individual sensors, and iii) eliminates a need for laborious alignment procedures. A less obvious benefit of using microfabrication methods is the possibility of precise control over the dimensions of the sensor. This control enables engineering of some of the properties of the material which affect the sensor's operation. There are many examples of this in the literature. Optical sensors are known to have superior properties over their counterparts that use other (i. e. ; electrostatic and magnetic) means of detection. To name a few, these advantages are: i) immunity to electromagnetic interferences, ii) higher sensitivities compared to the other types of sensors, iii) simplicity of operation principles, and iv) simplicity of overall construction.

Download or read book Microactuators written by Massood Tabib-Azar and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: 219 8. 2 Sensors 221 8. 3 Physical Sensors 222 8. 3. 1 Electrical Sensing Means 223 8. 3. 2 Magnetic Field Methods 231 8. 3. 3 Optical Methods 232 8. 4 Chemical Sensors 241 8. 4. 1 Electrical Gas and Chemical Sensors 243 8. 4. 2 Guided-Optics Intrinsic Chemical Sensors 246 8. 4. 3 Extrinsic Chemical Sensors 250 8. 4. 4 Polymer Waveguide Chemical Sensors 251 8. 4. 5 Surface Plasmon Chemical Sensors 252 8. 4. 6 Indicator-Mediated Extrinsic Sensing 253 8. 4. 7 Optical Biosensors 256 8. 4. 8 Ultrasonic Gas and Chemical Sensors 257 8. 4. 9 Intelligent Sensors 258 8. 5 Connections/Links and Wiring 258 8. 5. 1 Optical Links 260 8. 5. 2 Requirement on the Processing Unit/Intelligence 262 8. 6 Actuators 263 8. 7 Signal Processing/Computing 264 8. 7. 1 Implicit Computation 266 8. 7. 2 Explicit Computation 267 8. 8 References 274 Subject Index 279 Micro-Actuators (Electrical, Magnetic, Thermal, Optical, Mechanical, and Chemical) It has become quite apparent that sensors and actuators are the main bottleneck of the modem information processing and control systems. Microprocessors and computers used to be the main limiting element in most information processing systems. But thanks to the enonnous progress in the microelectronics industry, most information analysis tasks can be processed in real time. The data has to be acquired by the processor in some form and processed and used to produce some useful function in the real world.

Download or read book Integrated Optics and Microstructures written by and published by . This book was released on 1994 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Magnetic Microscopy of Nanostructures written by Herbert Hopster and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive collection of overview articles on novel microscopy methods for imaging magnetic structures on the nanoscale. Written by leading scientists in the field, the book covers synchrotron based methods, spin-polarized electron methods, and scanning probe techniques. It constitutes a valuable source of reference for graduate students and newcomers to the field.

Download or read book Advances in Integrated Optics written by M. Bertolotti and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volwne contains the Proceedings of a two-week summer conference titled "Advances in Integrated Optics" held June 1-9, 1993, in Erice, Sicily. This was the 18th annual course organized by the International School of Quantum Electronics, under the auspices of the "Ettore Majorana" Centre for Scientific Culture. The term Integrated Optics signifies guided-wave optical circuits consisting of two or more devices on a single substrate. Since its inception in the late 1960's, Integrated Optics has evolved from a specialized research topic into a broad field of work, ranging from basic research through commercial applications. Today many devices are available on market while a big effort is devolved to research on integrated nonlinear optical devices. This conference was organized to provide a comprehensive survey of the frontiers of this technology, including fundamental concepts, nonlinear optical materials, devices both in the linear and nonlinear regimes, and selected applications. These Proceedings update and augment the material contained in a previous ISQE volume, "Integrated Optics: Physics and Applications", S. Martellucci and A. N. Chester, Eds. , NATO ASI Series B, Vol. 91 (Plenum, 1983). For some closely related technology, the reader many also wish to consult the ISQE volumes: "Optical Fiber Sensors", A. N. Chester, S. Martellucci and A. M. Scheggi, Eds. , NATO ASI Series E, Vol. 132 (Nijhoff, 1987) ; and, "Nonlinear Optics and Optical Computing", S. Martellucci and A. N. Chester, Eds. , E. Majorana Int'! Science Series, Vol. 49 (plenum, 1990).

Download or read book Micro Optics written by H. P. Herzig and published by CRC Press. This book was released on 1997-04-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the technology behind the plethora of modern industrial and domestic technologies which incorporate micro-optics eg. CDs, cameras, automated manufacturing systems, mobile communications etc. It includes a simple but comprehensive introduction to micro-optical developments design, and an overview of fabrication and replication tec

Download or read book Optical Engineering written by and published by . This book was released on 2001 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publishes papers reporting on research and development in optical science and engineering and the practical applications of known optical science, engineering, and technology.

Download or read book The 25th European Conference on Integrated Optics written by Jeremy Witzens and published by Springer Nature. This book was released on with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Microlithography Micromachining and Microfabrication Micromachining and microfabrication written by P. Rai-Choudhury and published by IET. This book was released on 1997 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains useful process details, recipes, tables, charts and includes numerous device applications.

Download or read book Microelectronic Interconnections and Assembly written by G.G. Harman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: MICROELECTRONIC INTERCONNECTIONS AND MICROASSEMBL Y WORKSHOP 18-21 May 1996, Prague, Czech Republic Conference Organizers: George Harman, NIST (USA) and Pavel Mach (Czech Republic) Summary of the Technical Program Thirty two presentations were given in eight technical sessions at the Workshop. A list of these sessions and their chairpersons is attached below. The Workshop was devoted to the technical aspects of advanced interconnections and microassembly, but also included papers on the education issues required to prepare students to work in these areas. In addition to new technical developments, several papers presented overviews predicting the future directions of these technologies. The basic issue is that electronic systems will continue to be miniaturized and at the same time performance must continue to improve. Various industry roadmaps were discussed as well as new smaller packaging and interconnection concepts. The newest chip packages are often based on the selection of an appropriate interconnection method. An example is the chip-scale package, which has horizontal (x-y) dimensions,;; 20% larger than the actual silicon chip itself. The chip is often flip-chip connected to a micro ball-grid-array, but direct chip attach was described also. Several papers described advances in the manufacture of such packages.

Download or read book MEMS and NEMS written by Sergey Edward Lyshevski and published by CRC Press. This book was released on 2018-10-03 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of micro- and nano-mechanical systems (MEMS and NEMS) foreshadows momentous changes not only in the technological world, but in virtually every aspect of human life. The future of the field is bright with opportunities, but also riddled with challenges, ranging from further theoretical development through advances in fabrication technologies, to developing high-performance nano- and microscale systems, devices, and structures, including transducers, switches, logic gates, actuators and sensors. MEMS and NEMS: Systems, Devices, and Structures is designed to help you meet those challenges and solve fundamental, experimental, and applied problems. Written from a multi-disciplinary perspective, this book forms the basis for the synthesis, modeling, analysis, simulation, control, prototyping, and fabrication of MEMS and NEMS. The author brings together the various paradigms, methods, and technologies associated with MEMS and NEMS to show how to synthesize, analyze, design, and fabricate them. Focusing on the basics, he illustrates the development of NEMS and MEMS architectures, physical representations, structural synthesis, and optimization. The applications of MEMS and NEMS in areas such as biotechnology, medicine, avionics, transportation, and defense are virtually limitless. This book helps prepare you to take advantage of their inherent opportunities and effectively solve problems related to their configurations, systems integration, and control.

Download or read book Optical Engineering of Diamond written by Rich Mildren and published by John Wiley & Sons. This book was released on 2013-01-14 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive book on the engineering of diamond optical devices. Written by 39 experts in the field, it gives readers an up-to-date review of the properties of optical quality synthetic diamond (single crystal and nanodiamond) and the nascent field of diamond optical device engineering. Application areas covered in detail in this book include quantum information processing, high performance lasers and light sources, and bioimaging. It provides scientists, engineers and physicists with a valuable and practical resource for the design and development of diamond-based optical devices.

Download or read book Guided Wave Optoelectronics written by Theodor Tamir and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1945, Dr. Ernst Weber founded, and was the first Director of, the Microwave Research Institute (MRI) at Polytechnic University (at that time named the Polytechnic Institute of Brooklyn). MRI gained worldwide recognition in the 50s and 60s for its research in electromagnetic theory, antennas and radiation, network theory and microwave networks, microwave components, and devices. It was also known through its series of 24 topical symposia and the widely distributed hardbound MRI Symposium Proceedings. Rededicated as the Weber Research Institute (WRI) in 1986, the institute currently conducts research in such areas as electromagnetic propagation and antennas, ultrabroadband electromagnetics, pulse power, acoustics, gaseous electronics, plasma physics, solid-state materials, quantum electronics, electromagnetic launchers, and networks. Following MRI tradition, WRI has launched its own series of in-depth topical conferences with published proceedings. Previous conferences in this series were: Directions in Electromagnetic Wave Modeling; October 1990 Ultra-Wideband Short-Pulse Electromagnetics; October, 1992 Ultra-Wideband Short-Pulse Electromagnetics, II; October, 1994 The proceedings of these conferences were also published by Plenum Press. This volume constitutes the proceedings of the fourth WRI International Conference dealing with Guided-Wave Optoelectronics: Device Characterization, Analysis and Design. The conference was held October 26-28, 1994, at the Polytechnic University in Brooklyn, New York, in cooperation with the IEEE Lasers and Electro Optics Society, and with the Optical Society of America. Theodor Tamir Giora Griffel Henry L. Bertoni v CONTENTS INTRODUCTORY Scanning the symposium. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . . . . . . . . T. Tamir and G. Griffel Photonics in telecommunications. . . . . . . . . . . . . . . . . . . . . . . 3 . . . . . . . . . H.

Download or read book Microcavities and Photonic Bandgaps Physics and Applications written by J.G. Rarity and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The control of optical modes in microcavities or in photonic bandgap (PBG) materials is coming of age! Although these ideas could have been developed some time ago, it is only recently that they have emerged, due to advances in both atomic physics and in fabrication techniques, be it on the high-quality dielectric mirrors required for high-finesse Fabry Perot resonators or in semiconductor multilayer deposition methods. Initially the principles of quantum electro-dynamics (QED) were demonstrated in elegant atomic physics experiments. Now solid-state implementations are being investigated, with several subtle differences from the atomic case such as those due to their continuum of electronic states or the near Boson nature of their elementary excitations, the exciton. Research into quantum optics brings us ever newer concepts with potential to improve system performance such as photon squeezing, quantum cryptography, reversible taps, photonic de Broglie waves and quantum computers. The possibility of implementing these ideas with solid-state systems gives us hope that some could indeed find their way to the market, demonstrating the continuing importance of basic research for applications, be it in a somewhat more focused way than in earlier times for funding.

Download or read book NASA Technical Memorandum written by and published by . This book was released on 1994 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Encyclopedic Handbook of Integrated Optics written by Kenichi Iga and published by CRC Press. This book was released on 2018-10-03 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: As optical technologies move closer to the core of modern computer architecture, there arise many challenges in building optical capabilities from the network to the motherboard. Rapid advances in integrated optics technologies are making this a reality. However, no comprehensive, up-to-date reference is available to the technologies and principles underlying the field. The Encyclopedic Handbook of Integrated Optics fills this void, collecting the work of 53 leading experts into a compilation of the most important concepts, phenomena, technologies, and terms covering all related fields. This unique book consists of two types of entries: the first is a detailed, full-length description; the other, a concise overview of the topic. Additionally, the coverage can be divided into four broad areas: A survey of the basics of integrated optics, exploring theory, practical concerns, and the fundamentals behind optical devices Focused discussion on devices and components such as arrayed waveguide grating, various types of lasers, optical amplifiers, and optoelectronic devices In-depth examination of subsystems including MEMS, optical pickup, and planar lightwave circuits Finally, systems considerations such as multiplexing, demultiplexing, 3R circuits, transmission, and reception Offering a broad and complete treatment of the field, the Encyclopedic Handbook of Integrated Optics is the complete guide to the fundamentals, principles, and applications of integrated optics technology.

Download or read book Image Analysis of Food Microstructure written by John C. Russ and published by CRC Press. This book was released on 2004-11-15 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Image Analysis of Food Microstructure offers a condensed guide to the most common procedures and techniques by which quantitative microstructural information about food can be obtained from images. The images are selected from a broad range of food items, including macroscopic images of meat and finished products such as pizza, and the microstructu