Download or read book Instrumentation and Control Systems and Software Important to Safety for Research Reactors written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-08-14 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides specific recommendations on research reactor instrumentation and control systems and software important to safety, including instrumentation and control system architecture and associated components, from sensors to actuators, operator interfaces and auxiliary equipment, to meet the relevant requirements of IAEA Safety Standards Series No. SSR-3, Safety of Research Reactors. The recommendations and guidance apply to both the design and configuration management of instrumentation and control systems for new research reactors and the modernization of the instrumentation and control systems at existing research reactor facilities. In addition, this Safety Guide provides recommendations and guidance on human factors engineering and human-machine interfaces, and for computer based systems and software for use in instrumentation and control systems important to safety. This Safety Guide is a revision of IAEA Safety Standards Series No. SSG-37, which it supersedes.
Download or read book Instrumentation and Control Systems and Software Important to Safety for Research Reactors written by International Atomic Energy Agency and published by IAEA Safety Standards. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations and guidance on instrumentation and control systems and software important to safety for research reactors, including instrumentation and control system architecture and associated components, from sensors to actuators, operator interfaces and auxiliary equipment. It also provides recommendations on computer based systems and software, including software requirements and design, verification and validation, integration, and operation. This publication also addresses safety classification, design, implementation, qualification and operation of instrumentation as well as control systems. The recommendations and guidance apply to both the design and configuration management of instrumentation and control systems for new research reactors and the modernization of the instrumentation and control systems to existing research reactor facilities. In addition, this Safety Guide provides recommendations and guidance on human factors engineering and human-machine interfaces, and for computer based systems and software for use in instrumentation and control systems important to safety.
Download or read book Instrumentation and Control Systems and Software Important to Safety for Research Reactors written by International Atomic Energy Agency and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Instrumentation and Control Systems and Software Important to Safety for Research Reactors written by International Atomic Energy Agency and published by . This book was released on 2023-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on the operating organization and on personnel for research reactors to meet the relevant requirements of IAEA Safety Standards Series No. SSR-3, Safety of Research Reactors. It covers the typical operating organization for research reactor facilities; the recruitment process and qualification in terms of education, training and experience; programmes for initial and continuing training; the authorization process for those individuals having an immediate bearing on safety; and the processes for their requalification and reauthorization. This Safety Guide is a revision of IAEA Safety Standards Series No. NS-G-4.5, which it supersedes.
Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by Committee on Application of Digital Instrumentation and Control Systems to Nuclear Power Plant Operations and Safety and published by National Academies Press. This book was released on 1997-05-02 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.
Download or read book Digital Instrumentation and Control Systems for New and Existing Research Reactors written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-04-27 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: IAEA work in the area of research reactor operation and maintenance is aimed at enhancing the capabilities of Member States to utilize good engineering and management practices to improve research reactor reliability and availability. In particular, the IAEA supports activities addressing ageing management of research reactor instrumentation and control (I&C) systems. The purpose of this publication is to provide engineering guidance on the design, and operational aspects of digital I&C systems for the refurbishment of existing facilities and for new research reactors. Key areas addressed include codes and standards applicability, licensing issues, dealing with the change in human-system interface from analogue to digital technology, software verification and validation activities, periodic testing and inspection, and configuration management. The publication contains technical descriptions and summaries of available digital systems that have been utilized in both new research reactor designs, and in the upgrading of older analogue safety and control systems. This guidance is foreseen for the broad spectrum of research reactors types existing today.
Download or read book Dependability Assessment of Software for Safety Instrumentation and Control Systems at Nuclear Power Plants written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2018-09-30 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication defines a framework that represents the state of the art in assessment methodologies for safety and instrumentation and control software used at nuclear power plants. It describes an approach for developing and communicating assessments based on claims, argument and evidence. The assessment of software dependability, which encompasses properties such as safety, reliability, availability, maintainability and security, is an essential and challenging aspect of the safety justification. Guiding principles for a dependability assessment are established to provide the basis for defining an assessment strategy and implementing the assessment process. Sources of evidence for the assessment are provided and lessons learned from past digital instrumentation and control system implementation in areas such as software development, operational usage, regulatory review and platform certification are also described.
Download or read book Plant Hazard Analysis and Safety Instrumentation Systems written by Swapan Basu and published by Academic Press. This book was released on 2016-10-21 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant Hazard Analysis and Safety Instrumentation Systems is the first book to combine coverage of these two integral aspects of running a chemical processing plant. It helps engineers from various disciplines learn how various analysis techniques, international standards, and instrumentation and controls provide layers of protection for basic process control systems, and how, as a result, overall system reliability, availability, dependability, and maintainability can be increased. This step-by-step guide takes readers through the development of safety instrumented systems, also including discussions on cost impact, basics of statistics, and reliability. Swapan Basu brings more than 35 years of industrial experience to this book, using practical examples to demonstrate concepts. Basu links between the SIS requirements and process hazard analysis in order to complete SIS lifecycle implementation and covers safety analysis and realization in control systems, with up-to-date descriptions of modern concepts, such as SIL, SIS, and Fault Tolerance to name a few. In addition, the book addresses security issues that are particularly important for the programmable systems in modern plants, and discusses, at length, hazardous atmospheres and their impact on electrical enclosures and the use of IS circuits. Helps the reader identify which hazard analysis method is the most appropriate (covers ALARP, HAZOP, FMEA, LOPA) Provides tactics on how to implement standards, such as IEC 61508/61511 and ANSI/ISA 84 Presents information on how to conduct safety analysis and realization in control systems and safety instrumentation
Download or read book Safety in the Utilization and Modification of Research Reactors written by IAEA and published by International Atomic Energy Agency. This book was released on 2022-09-01 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide is a revision of IAEA Safety Standards Series No. SSG-24, which it supersedes. The current publication provides recommendations on how to meet the applicable safety requirements relating to the utilization and modification of research reactors. The recommendations focus on the categorization, safety assessment and approval of research reactor experiments and modification projects. The publication also incorporates the relevant lessons learned from the accident at the Fukushima Daiichi nuclear power plant and elaborates on interfaces between nuclear safety and nuclear security. Specific safety considerations in different phases of utilization and modification projects are covered, including preimplementation, implementation, and post implementation phases. Guidance is given on operational safety of experiments, including the handling, dismantling, post-irradiation examination and disposal of experimental devices. The publication is intended to be of use to individuals within the operating organizations of research reactors, regulatory bodies, as well as the experimenters, technical support organizations and other persons involved in utilization and modification projects.
Download or read book Ageing Management for Research Reactors written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-08-14 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides practical guidance and recommendations on ageing management for research reactors, to meet the relevant requirements of IAEA Safety Standards Series No. SSR-3, Safety of Research Reactors. It is intended for use by operating organizations in establishing, implementing and improving ageing management programmes for research reactors, and by regulatory bodies in verifying that ageing of research reactors is being effectively managed. The Safety Guide focuses on managing the physical ageing of systems, structures and components important to safety, and also provides guidance on safety aspects of managing obsolescence. This Safety Guide is a revision of IAEA Safety Standards Series No. SSG-10, which it supersedes.
Download or read book Maintenance Periodic Testing and Inspection of Research Reactors written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-04-27 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides specific recommendations on the maintenance, periodic testing and inspection of research reactors to meet the relevant requirements of IAEA Safety Standards Series No. SSR-3, Safety of Research Reactors. It provides guidance on design considerations and recommends good practices in implementing the programme and establishing the organization and responsibilities for maintenance, periodic testing and inspection as well as for the selection, training and qualification of personnel. Procedures, administrative controls and maintenance facilities are also covered as well as procurement and storage of spare parts and components, and testing and inspection methods and techniques used for maintenance, periodic testing and inspection. The recommendations provided in this Safety Guide are aimed at operating organizations of research reactors, regulatory bodies and other organizations involved in a research reactor project. This Safety Guide is a revision of IAEA Safety Standards Series No. NS-G-4.2, which it supersedes.
Download or read book Safety of Research Reactors written by and published by IAEA. This book was released on 2005 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Establishes requirements for all areas of the safety of research reactors, with particular emphasis on requirements for design and operation. This publication covers the lifetime of research reactor facilities, from site evaluation to design and construction, commissioning, operation, including utilization and modification, and decommissioning.
Download or read book Commissioning of Research Reactors written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-04-19 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides specific recommendations on establishing a programme and organization for commissioning of research reactors to meet the relevant requirements of IAEA Safety Standards Series No. SSR-3, Safety of Research Reactors. It covers the commissioning stages, procedures, reports and documentation and provides guidance for commissioning of new experimental devices and modifications. The recommendations in this publication are intended for use by operating organizations of research reactors, regulatory bodies and other relevant organizations involved in a research reactor project. This Safety Guide is a revision of IAEA Safety Standards Series No. NS-G-4.1, which it supersedes.
Download or read book Core Management and Fuel Handling for Research Reactors written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-04-28 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides specific recommendations on core management and fuel handling for research reactors, including handling and storage of fresh fuel, irradiated fuel, core components and neutron sources, to meet the relevant requirements of IAEA Safety Standards Series No. SSR-3, Safety of Research Reactors. The recommendations in this publication are intended for use by operating organizations of research reactors, regulatory bodies and other relevant organizations involved in a research reactor project. This Safety Guide is a revision of lAEA Safety Standards Series No. NS-G-4.3, which it supersedes.
Download or read book Operational Limits and Conditions and Operating Procedures for Research Reactors written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-04-28 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide is a revision of IAEA Safety Standards Series No. NS-G-4.4, which it supersedes. The revised version provides specific recommendations on developing, formulating and presenting the operational limits and conditions as well as the operating procedures for research reactors, to meet the relevant requirements of IAEA Safety Standards Series No. SSR-3, Safety of Research Reactors. The recommendations in this publication are intended for use by operating organizations of research reactors, regulatory bodies and other relevant organizations involved in a research reactor project.
Download or read book Noise Control of the Beginning and Development Dynamics of Accidents written by Telman Aliev and published by Springer. This book was released on 2019-02-26 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines noise-monitoring technologies and tools for registering the threshold of development of the latent period of the transition of a facility or product into an emergency state and controlling the dynamics of this development. It also describes how the use of noise technology can improve the accuracy of the results of traditional methods employed in the analysis of noisy signals. Dr. Aliev analyzes the varieties and stages of the generation and development of defects preceding accidents of technical facilities and devices. He shows that registration of the beginning of the latent period in the transition to an emergency state, based on the results of traditional data analysis technologies used in monitoring systems, is sometimes belated due to the impossibility of analyzing the noise correlated with the useful signal. The volume further includes algorithms and technologies for computing estimates of correlation functions, spectral characteristics, and other characteristics of noise. Aimed at professionals and students from a range of fields, including facility and product design engineering, computer science, computational mathematics, control and management systems, geophysics, construction, energy, and medicine, the book provides numerous examples of noise-control intelligent systems. These include implementations at oil and gas production facilities, drilling rigs, and offshore fixed platforms, as well as within transportation, aviation, power engineering, seismology and medicine.
Download or read book Equipment Qualification for Nuclear Installations written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-12-09 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on a structured approach to the establishment and preservation of equipment qualification in nuclear installations, to confirm reliable performance of safety functions by such equipment during operational states and accident conditions, to avoid vulnerability due to common cause failure of the equipment. It applies primarily to equipment that performs one or more safety functions, but it may also be applied to items not important to safety, in accordance with national requirements. The qualification process covers electrical, instrumentation and control, and active mechanical equipment, and components associated with it, for example, seals, gaskets, lubricants, cables, connections, and mounting/anchoring structures. The qualification process for passive mechanical components for which the safety performance is assured by design in accordance with applicable codes, is outside the scope of this publication. The recommendations in this Safety Guide apply to new nuclear installations, and as far as is reasonably practicable to existing nuclear installations.
