Download or read book Inspection of Historic Steel Bridges Using Ultrasonic Phased Array written by Alejandra L. Roldan Arcos and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of ultrasonic phased array (UPA) technology for inspection of the trunnion bearing pin of the 100-year old Salmon Bay Bascule Bridge is the focus of this research. To thoroughly investigate the bearing pin, two main objectives are addressed: the development of a UPA system, including the design of a case that uses a Poly Methyl Meth Acrylate (PMMA) material to house the transducer, and the implementation of the system in the field to test the feasibility of the UPA system and its application as a nondestructive testing unit. Two different testing settings are carried out in this research. The first study is performed in a lab-based setting on a mock-up model pin. This model is used as a reference to provide the calibration of the UPA system using the exterior edge, two keyholes, and three diagonal interior grease holes. The second study is performed in a field-based setting on the authentic trunnion bearing pin taken out of service from the Salmon Bay Bridge in Seattle, Washington, currently residing at the Riverside Campus. This pin has three similar diagonal holes, keyholes, and unknown internal defects. Realtime measurements using the UPA system is used to identify the exterior surfaces and the keyholes of the original pin. The results of the inspection of the pins using the UPA system indicate the accuracy of the real-time data taken from the probe measurements. It was limited to seeing perpendicular defects and exterior sides, and could not identify the diagonal grease hole within both pin parts. It did, however, identify the keyholes, and was later verified by visual inspection once the sleeves were removed. The original pin showed no internal defects. For future research in nondestructive testing used in historic trunnion pins, it is recommended to combine this technology with an automatic system that allows the reduction of human interaction with the inspection. A membrane-like surface adaptable to rough faces, along with a constant flow of water between the wedge and surface, would facilitate the need to remove the PMMA case out of the pin to re-apply couplant for inspections. Finally, a modified angled wedge could also be applied within the PMMA case to search for different angled cracking. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/152486

Download or read book Phased Array Ultrasonic Steel Corrosion Mapping for Bridges and Ancillary Structures written by Barritt Lovelace and published by . This book was released on 2017 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel corrosion on bridges and ancillary structures due to environmental effects and deicing chemicals is a serious problem for Minnesota's infrastructure. The ability to detect, locate, and measure corrosion is an important aspect of structure inspection. Accurate thickness measurements and corrosion mapping are essential for determining load capacity of structural members on bridges and ancillary structures. The Minnesota Department of Transportation purchased an OmniScan Phased Array Corrosion Mapping System. Unlike conventional ultrasonic equipment, this system provides detailed three-dimensional images of structural members including the remaining section of members that exhibit corrosion. This gives engineers better tools to visualize and evaluate the condition of bridges than was previously possible. With the future purchase of additional transducers, the OmniScan can also be used for enhanced inspection of welds and bridge pins.

Download or read book Nondestructive Evaluation of Steel Bridges written by Theodore Hopwood (II) and published by . This book was released on 2016 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nondestructive evaluation (NDE) methods can be used to assess in-service steel bridges for problematic conditions caused by factors such as design, manufacturing, fabrication, and the service effects of traffic and corrosion. This report discusses typical NDE test methods used on bridges, including penetrant testing, magnetic particle testing, eddy current testing, ultrasonic testing (including phased array testing), radiography, and acoustic emission testing. NDE operations such as flaw location, characterization, and sizing are covered as well. Results of a national survey of departments of transportation’s (DOTs) use of NDE are presented. A simple procedure for using NDE to address DOT bridge concerns is proposed along with a risk-based inspection approach to scheduling/scoping bridge inspections.

Download or read book Bridge Engineering Handbook Second Edition written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject. Published in five books: Fundamentals, Superstructure Design, Substructure Design, Seismic Design, and Construction and Maintenance, this new edition provides numerous worked-out examples that give readers step-by-step design procedures, includes contributions by leading experts from around the world in their respective areas of bridge engineering, contains 26 completely new chapters, and updates most other chapters. It offers design concepts, specifications, and practice, as well as the various types of bridges. The text includes over 2,500 tables, charts, illustrations, and photos. The book covers new, innovative and traditional methods and practices; explores rehabilitation, retrofit, and maintenance; and examines seismic design and building materials. The fifth book, Construction and Maintenance contains 19 chapters, and covers the practical issues of bridge structures. What’s New in the Second Edition: Includes nine new chapters: Steel Bridge Fabrication, Cable-Supported Bridge Construction, Accelerated Bridge Construction, Bridge Management Using Pontis and Improved Concepts, Bridge Maintenance, Bridge Health Monitoring, Nondestructive Evaluation Methods for Bridge Elements, Life-Cycle Performance Analysis and Optimization, and Bridge Construction Methods Rewrites the Bridge Construction Inspection chapter and retitles it as: Bridge Construction Supervision and Inspection Expands and rewrites the Maintenance Inspection and Rating chapter into three chapters: Bridge Inspection, Steel Bridge Evaluation and Rating, and Concrete Bridge Evaluation and Rating; and the Strengthening and Rehabilitation chapter into two chapters: Rehabilitation and Strengthening of Highway Bridge Superstructures, and Rehabilitation and Strengthening of Orthotropic Steel Bridge Decks This text is an ideal reference for practicing bridge engineers and consultants (design, construction, maintenance), and can also be used as a reference for students in bridge engineering courses.

Download or read book Bridge Maintenance Safety Management Life Cycle Sustainability and Innovations written by Hiroshi Yokota and published by CRC Press. This book was released on 2021-04-20 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations contains lectures and papers presented at the Tenth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2020), held in Sapporo, Hokkaido, Japan, April 11–15, 2021. This volume consists of a book of extended abstracts and a USB card containing the full papers of 571 contributions presented at IABMAS 2020, including the T.Y. Lin Lecture, 9 Keynote Lectures, and 561 technical papers from 40 countries. The contributions presented at IABMAS 2020 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of maintenance, safety, management, life-cycle sustainability and technological innovations of bridges. Major topics include: advanced bridge design, construction and maintenance approaches, safety, reliability and risk evaluation, life-cycle management, life-cycle sustainability, standardization, analytical models, bridge management systems, service life prediction, maintenance and management strategies, structural health monitoring, non-destructive testing and field testing, safety, resilience, robustness and redundancy, durability enhancement, repair and rehabilitation, fatigue and corrosion, extreme loads, and application of information and computer technology and artificial intelligence for bridges, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of making more rational decisions on maintenance, safety, management, life-cycle sustainability and technological innovations of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including engineers, researchers, academics and students from all areas of bridge engineering.

Download or read book Bridge Engineering Handbook Five Volume Set written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 3130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection provides detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject, and also highlights bridges from around the world.Published

Download or read book Maintenance Monitoring Safety Risk and Resilience of Bridges and Bridge Networks written by Tulio Nogueira Bittencourt and published by CRC Press. This book was released on 2016-11-17 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, Monitoring, Safety, Risk and Resilience of Bridges and Bridge Networks contains the lectures and papers presented at the Eighth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2016), held in Foz do Iguaçu, Paraná, Brazil, 26-30 June, 2016. This volume consists of a book of extended abstracts and a DVD containing the full papers of 369 contributions presented at IABMAS 2016, including the T.Y. Lin Lecture, eight Keynote Lectures, and 360 technical papers from 38 countries. The contributions deal with the state-of-the-art as well as emerging concepts and innovative applications related to all main aspects of bridge maintenance, safety, management, resilience and sustainability. Major topics covered include: advanced materials, ageing of bridges, assessment and evaluation, bridge codes, bridge diagnostics, bridge management systems, composites, damage identification, design for durability, deterioration modeling, earthquake and accidental loadings, emerging technologies, fatigue, field testing, financial planning, health monitoring, high performance materials, inspection, life-cycle performance and cost, load models, maintenance strategies, non-destructive testing, optimization strategies, prediction of future traffic demands, rehabilitation, reliability and risk management, repair, replacement, residual service life, resilience, robustness, safety and serviceability, service life prediction, strengthening, structural integrity, and sustainability. This volume provides both an up-to-date overview of the field of bridge engineering as well as significant contributions to the process of making more rational decisions concerning bridge maintenance, safety, serviceability, resilience, sustainability, monitoring, risk-based management, and life-cycle performance using traditional and emerging technologies for the purpose of enhancing the welfare of society. It will serve as a valuable reference to all involved with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.

Download or read book Nondestructive Evaluation Tools to Improve the Inspection Fabrication and Repair of Bridges written by Glenn A. Washer and published by . This book was released on 2014 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Maintenance Safety Risk Management and Life Cycle Performance of Bridges written by Nigel Powers and published by CRC Press. This book was released on 2018-07-04 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges contains lectures and papers presented at the Ninth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), held in Melbourne, Australia, 9-13 July 2018. This volume consists of a book of extended abstracts and a USB card containing the full papers of 393 contributions presented at IABMAS 2018, including the T.Y. Lin Lecture, 10 Keynote Lectures, and 382 technical papers from 40 countries. The contributions presented at IABMAS 2018 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of bridge maintenance, safety, risk, management and life-cycle performance. Major topics include: new design methods, bridge codes, heavy vehicle and load models, bridge management systems, prediction of future traffic models, service life prediction, residual service life, sustainability and life-cycle assessments, maintenance strategies, bridge diagnostics, health monitoring, non-destructive testing, field testing, safety and serviceability, assessment and evaluation, damage identification, deterioration modelling, repair and retrofitting strategies, bridge reliability, fatigue and corrosion, extreme loads, advanced experimental simulations, and advanced computer simulations, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of more rational decision-making on bridge maintenance, safety, risk, management and life-cycle performance of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.

Download or read book Advances in Phased Array Ultrasonic Technology Applications written by and published by Olympus Ndt. This book was released on 2007 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Japanese Technical Abstracts written by and published by . This book was released on 1988 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Maintenance Safety Risk Management and Life Cycle Performance of Bridges written by Nigel Powers and published by CRC Press. This book was released on 2018-07-04 with total page 5447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges contains lectures and papers presented at the Ninth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), held in Melbourne, Australia, 9-13 July 2018. This volume consists of a book of extended abstracts and a USB card containing the full papers of 393 contributions presented at IABMAS 2018, including the T.Y. Lin Lecture, 10 Keynote Lectures, and 382 technical papers from 40 countries. The contributions presented at IABMAS 2018 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of bridge maintenance, safety, risk, management and life-cycle performance. Major topics include: new design methods, bridge codes, heavy vehicle and load models, bridge management systems, prediction of future traffic models, service life prediction, residual service life, sustainability and life-cycle assessments, maintenance strategies, bridge diagnostics, health monitoring, non-destructive testing, field testing, safety and serviceability, assessment and evaluation, damage identification, deterioration modelling, repair and retrofitting strategies, bridge reliability, fatigue and corrosion, extreme loads, advanced experimental simulations, and advanced computer simulations, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of more rational decision-making on bridge maintenance, safety, risk, management and life-cycle performance of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.

Download or read book Handbook of Nondestructive Evaluation 3E written by Chuck Hellier and published by McGraw Hill Professional. This book was released on 2020-02-07 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. A fully updated guide to nondestructive product testing practices and standards This up-to-date resource covers the latest methods for examining materials without destroying them or altering their structure. The book offers comprehensive details on the background, benefits, limitations, and applications of each technique. You will discover how to perform effective tests, interpret results, and formulate accurate decisions based on your findings. Ideal both as a textbook and as a study guide for the ANST certification exam, this book clearly discusses visual, ultrasonic, and thermal infrared testing—and much more. Handbook of Nondestructive Evaluation, Third Edition, covers: [The first bullet point states the obvious: Like most books, this book introduces the subject of the book in Chapter 1. Therefore, I have deleted the bullet point. (Of course, this is just my opinion. If others disagree with me, feel free to ignore me.) • Discontinuities―origins and classification • Visual testing • Penetrant testing • Magnetic particle testing • Radiographic testing • Ultrasonic testing • Eddy current testing • Thermal infrared testing • Acoustic emission testing • Digital radiography • Ultrasonic phased array testing • Ultrasonic guided wave inspection • Shearography nondestructive testing

Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Japanese Technical Periodical Index written by and published by . This book was released on 1987 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: