Download or read book Inorganic Metal Oxide Nanocrystal Photocatalysts for Solar Fuel Generation from Water written by Troy K. Townsend and published by Springer Science & Business Media. This book was released on 2014-03-19 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Troy Townsend's thesis explores the structure, energetics and activity of three inorganic nanocrystal photocatalysts. The goal of this work is to investigate the potential of metal oxide nanocrystals for application in photocatalytic water splitting, which could one day provide us with clean hydrogen fuel derived from water and solar energy. Specifically, Townsend's work addresses the effects of co-catalyst addition to niobium oxide nanotubes for photocatalytic water reduction to hydrogen, and the first use of iron oxide 'rust' in nanocrystal suspensions for oxygen production. In addition, Townsend studies a nickel/oxide-strontium titanate nanocomposite which can be described as one of only four nanoscale water splitting photocatalysts. He also examines the charge transport for this system. Overall, this collection of studies brings relevance to the design of inorganic nanomaterials for photocatalytic water splitting while introducing new directions for solar energy conversion.
Download or read book Nanostructured Materials for Visible Light Photocatalysis written by Arpan Kumar Nayak and published by Elsevier. This book was released on 2021-10-10 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Materials for Visible Light Photocatalysis describes the various methods of synthesizing different classes of nanostructured materials that are used as photocatalysts for the degradation of organic hazardous dyes under visible light irradiation. The first three chapters include a general introduction, basic principles, mechanisms, and synthesis methods of nanomaterials for visible light photocatalysis. Recent advances in carbon, bismuth series, transition metal oxide and chalcogenides-based nanostructured materials for visible light photocatalysis are discussed. Later chapters describe the role of phosphides, nitrides, and rare earth-based nanostructured-based materials in visible light photocatalysis, as well as the characteristics, synthesis, and fabrication of photocatalysts. The role of doping, composites, defects, different facets, morphology of nanostructured materials and green technology for efficient dye removal under visible-light irradiation are also explored. Other topics covered include large-scale production of nanostructured materials, the challenges in present photocatalytic research, the future scope of nanostructured materials regarding environmental hazard remediation under visible light, and solar light harvesting. This book is a valuable reference to researchers and enables them to learn more about designing advanced nanostructured materials for wastewater treatment and visible-light irradiation. Covers all the recent developments of nanostructured photocatalytic materials Provides a clear overview of the mechanism of visible light photocatalysis and the controlled synthesis of nanostructured materials Assesses the major challenges of creating visible light photocatalysis systems at the nanoscale
Download or read book Nanocarbon Inorganic Hybrids written by Dominik Eder and published by Walter de Gruyter GmbH & Co KG. This book was released on 2014-08-20 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocarbon-Inorganic Hybrids is dedicated exclusively to the new family of functional materials, covering a multidisciplinary research field that combines materials science, chemistry and physics with nanotechnology and applied energy science. It provides a concise introduction into fundamental principles of nanocarbons, defines hybrids and composites, explains the physics behind sustainability, and illustrates requirements for successful implementation in energy applications. It further reviews the current research on developing concepts for designing nanocarbon hybrids, unravels mechanistic details of interfacial electron transfer processes and highlights future challenges and perspectives associated with exploiting these exciting new materials in commercial energy applications and beyond. This comprehensively written book is indispensable for Master and PhD students seeking to become familiar with a modern fi eld of knowledge-driven material science as well as for senior researchers and industrial staff scientists who explore the frontiers of knowledge.
Download or read book Photoelectrochemical Engineering for Solar Harvesting written by Samrana Kazim and published by Elsevier. This book was released on 2024-06-24 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectrochemical Engineering for Solar Harvesting provides an up-to-date appraisal of the photon engineering of innovative catalysts for solar energy harvesting.Sunlight-driven fuel synthesis is the most sustainable and potentially economical option for producing energy vectors through water splitting. Thus this book focuses on the design of photocatalysts and water oxidation catalysts, as artificial photosynthesis and hydrogen fuel production via water oxidation (in place of fossil fuels) are two promising approaches towards renewable energy.The book critically analyzes the overall progress, potential challenges, and the possibility of industrialization of new catalysts in the near future. The primary emphasis of the discussion is on experimental approaches from materials synthesis to device applications, however, there will also be some introduction to relevant photochemistry concepts.Photoelectrochemical Engineering for Solar Harvesting is suitable for materials scientists and chemists who through the use of photonics are in continuous pursuit of improving the efficiencies of different devices used to capture solar energy for the generation of sustainable fuel. Covers design of innovative energy materials such as photocatalysts and water oxidation catalysts for solar energy harvesting Reviews briefly computational and theoretical approaches before providing comprehensive overview of experimental directions Provides information to guide photon and photoelectrochemical engineering of catalysts for solar application
Download or read book Photocatalytic Hydrogen Evolution written by Misook Kang and published by MDPI. This book was released on 2020-06-17 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy crises and global warming pose serious challenges to researchers in their attempt to develop a sustainable society for the future. Solar energy conversion is a remarkable, clean, and sustainable way to nullify the effects of fossil fuels. The findings of photocatalytic hydrogen production (PCHP) by Fujishima and Honda propose that “water will be the coal for the future”. Hydrogen is a carbon-free clean fuel with a high specific energy of combustion. Titanium oxide (TiO2), graphitic-carbon nitride (g-C3N4) and cadmium sulfide (CdS) are three pillars of water splitting photocatalysts owing to their superior electronic and optical properties. Tremendous research efforts have been made in recent years to fabricate visible or solar-light, active photocatalysts. The significant features of various oxide, sulfide, and carbon based photocatalysts for cost-effective hydrogen production are presented in this Special Issue. The insights of sacrificial agents on the hydrogen production efficiency of catalysts are also presented in this issue.
Download or read book Photoelectrochemical Hydrogen Generation written by Praveen Kumar and published by Springer Nature. This book was released on 2022-01-19 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the hydrogen fuel generation from water via photoelectrochemical process. It elaborates the theory and fundamental concepts of photoelectrochemistry to understand the photoelectrochemical process for water splitting to generate hydrogen fuel. The book further deliberates about the hydrogen as a futuristic chemical fuel to store solar energy in the form of chemical bonds and also as a renewable alternative to fossil fuels. The book establishes the need for hydrogen fuel and discusses the standards and practices used for solar driven photoelectrochemical water splitting. It also discusses the current and future status of the nanomaterials as efficient photoelectrodes for solar photoelectrochemical water splitting. The book will be of interest to the researchers, students, faculty, scientists, engineers, and technologists working in the domain of material science, energy harvesting, energy conversion, photo electrochemistry, nanomaterials for photo-electrochemical (PEC) cell, etc.
Download or read book Multifunctional Photocatalytic Materials for Energy written by Zhiqun Lin and published by Woodhead Publishing. This book was released on 2018-03-19 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multifunctional Photocatalytic Materials for Energy discusses recent developments in multifunctional photocatalytic materials, such as semiconductors, quantum dots, carbon nanotubes and graphene, with an emphasis on their novel properties and synthesis strategies and discussions of their fundamental principles and applicational achievements in energy fields, for example, hydrogen generation from water splitting, CO2 reduction to hydrocarbon fuels, degradation of organic pollutions and solar cells. This book serves as a valuable reference book for researchers, but is also an instructive text for undergraduate and postgraduate students who want to learn about multifunctional photocatalytic materials to stimulate their interests in designing and creating advanced materials. Covers all aspects of recent developments in multifunctional photocatalytic materials Provides fundamental understanding of the structure, properties and energy applications of these materials Contains contributions from leading international experts in the field working in multidisciplinary subject areas Focuses on advanced applications and future research advancements, such as graphene-based nanomaterials and multi-hybrid nanocomposites Presents a valuable reference for researchers and students that stimulates interest in designing advanced materials for renewable energy resources
Download or read book Semiconductors for Photocatalysis written by and published by Academic Press. This book was released on 2017-06-30 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors for Photocatalysis, Volume 97 covers the latest breakthrough research and exciting developments in semiconductor photocatalysts and electrodes for water splitting and CO2 reduction. It includes a broad range of materials such as metal-oxides, metal-nitrides, silicon, III-V semiconductors, and the emerging layered compounds. New to this volume are chapters covering the Fundamentals of Semiconductor Photoelectrodes, Charge Carrier Dynamics in Metal Oxide Photoelectrodes for Water Oxidation, Photophysics and Photochemistry at the Semiconductor/Electrolyte Interface for Solar Water Splitting, V Semiconductor Photoelectrodes, III-Nitride Semiconductor Photoelectrodes, and Rare Earth Containing Materials for Photoelectrochemical Water Splitting Applications. In addition, the design and modeling of photocatalysts and photoelectrodes and the fundamental mechanisms of water splitting and CO2 reduction is also discussed. Features the latest breakthroughs and research and development in semiconductor photocatalysis, solar fuels, and artificial photosynthesis Covers a broad range of topics, including a wide variety of materials and many important aspects of solar fuels Includes in-depth discussions on materials design, growth and synthesis, engineering, characterization, and photoelectrochemical studies
Download or read book New and Future Developments in Catalysis written by Steven L Suib and published by Newnes. This book was released on 2013-07-19 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: New and Future Developments in Catalysis is a package of seven books that compile the latest ideas concerning alternate and renewable energy sources and the role that catalysis plays in converting new renewable feedstock into biofuels and biochemicals. Both homogeneous and heterogeneous catalysts and catalytic processes will be discussed in a unified and comprehensive approach. There will be extensive cross-referencing within all volumes.The use of solar energy during various catalytic chemical processes for the production of an array of chemical products is the theme of this volume. Photocatalysis is a topic of increasing importance due to its essential role in many of today’s environmental and energy source problems. The use of solar energy for catalytic reactions results in a carbon dioxide–neutral process. All photocatalytic processes and the future developments in this area are discussed, including an economic analysis of the various processes. Offers in-depth coverage of all catalytic topics of current interest and outlines future challenges and research areas A clear and visual description of all parameters and conditions, enabling the reader to draw conclusions for a particular case Outlines the catalytic processes applicable to energy generation and design of green processes
Download or read book Metal Oxide Nanostructures written by Daniela Nunes and published by Elsevier. This book was released on 2018-11-01 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanostructures: Synthesis, Properties and Applications covers the theoretical and experimental aspects related to design, synthesis, fabrication, processing, structural, morphological, optical and electronic properties on the topic. In addition, it reviews surface functionalization and hybrid materials, focusing on the advantages of these oxide nanostructures. The book concludes with the current and future prospective applications of these materials. Users will find a complete overview of all the important topics related to oxide nanostructures, from the physics of the materials, to its application. Delves into hybrid structured metal oxides and their promising use in the next generation of electronic devices Includes fundamental chapters on synthesis design and the properties of metal oxide nanostructures Provides an in-depth overview of novel applications, including chromogenics, electronics and energy
Download or read book Chalcogenide Based Nanomaterials as Photocatalysts written by Mohammad Mansoob Khan and published by Elsevier. This book was released on 2021-04-07 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chalcogenide-Based Nanomaterials as Photocatalysts deals with the different types of chalcogenide-based photocatalytic reactions, covering the fundamental concepts of photocatalytic reactions involving chalcogenides for a range of energy and environmental applications. Sections focus on nanostructure control, synthesis methods, activity enhancement strategies, environmental applications, and perspectives of chalcogenide-based nanomaterials. The book offers guidelines for designing new chalcogenide-based nanoscale photocatalysts at low cost and high efficiency for efficient utilization of solar energy in the areas of energy production and environment remediation. Provides information on the development of novel chalcogenide-based nanomaterials Outlines the fundamentals of chalcogenides-based photocatalysis Includes techniques for heterogeneous catalysis based on chalcogenide-based nanomaterials
Download or read book Conversion of Water and CO2 to Fuels using Solar Energy written by Oomman K. Varghese and published by John Wiley & Sons. This book was released on 2024-02-05 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conversion of Water and CO2 to Fuels usingSolar Energy Comprehensive Resource for Understanding the Emerging Solar Technologies for Hydrogen Generation via Water Splitting and Carbon-based Fuel Production via CO2 Recycling Fossil fuel burning is the primary source of carbon in the atmosphere. The realization that such burning can harm the life on our planet, has led to a surge in research activities that focus on the development of alternative strategies for energy conversion. Fuel generation using solar energy is one of the most promising approaches that has received widespread attention. The fuels produced using sunlight are commonly referred to as “solar fuels.” This book provides researchers interested in solar fuel generation a comprehensive understanding of the emerging solar technologies for hydrogen generation via water splitting and carbon-based fuel production via CO2 recycling. The book presents the fundamental science, technologies, techno-economic analysis, and most importantly, the materials that are being explored to establish artificial methods of fuel production using solar energy. For the rapid advancement of the field, it is necessary for researchers, particularly for those who are new to the field, to have clear knowledge of various materials studied so far and their performance. For this reason, almost half of the book is dedicated to the discussions on materials and properties. Key topics discussed in the book include: Photocatalytic/photoelectrochemical processes that use semiconductor photocatalysts, including both ceramic and non-ceramic materials Photovoltaic assisted electrochemical processes Solar thermochemical processes Molecular photosynthesis Researchers and professionals in the fields of energy and materials and closely related science and engineering disciplines could use this book to aquire clear insights on both mainstream solar fuel technologies and those in the developmental stages.
Download or read book Multifunctional Nanostructured Metal Oxides for Energy Harvesting and Storage Devices written by Vijay B. Pawade and published by CRC Press. This book was released on 2020-05-21 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal oxide nanoparticles exhibit potential applications in energy and environmental fields, such as solar cells, fuel cells, hydrogen energy, and energy storage devices. This book covers all points from synthesis, properties, and applications of transition metal oxide nanoparticle materials in energy storage and conversion devices. Aimed at graduate-level students and researchers associated with the energy and environment sector, this book addresses the application of nontoxic and environmentally friendly metal oxide materials for a clean environment and deals with synthesis properties and application metal oxides materials for energy conversion, energy storage, and hydrogen generation.
Download or read book Materials and Processes for Solar Fuel Production written by Balasubramanian Viswanathan and published by Springer. This book was released on 2014-10-09 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features different approaches to non-biochemical pathways for solar fuel production. This one-of-a-kind book addresses photovoltaics, photocatalytic water splitting for clean hydrogen production and CO2 conversion to hydrocarbon fuel through in-depth comprehensive contributions from a select blend of established and experienced authors from across the world. The commercial application of solar based systems, with particular emphasis on non-PV based devices have been discussed. This book intends to serve as a primary resource for a multidisciplinary audience including chemists, engineers and scientists providing a one-stop location for all aspects related to solar fuel production. The material is divided into three sections: Solar assisted water splitting to produce hydrogen; Solar assisted CO2 utilization to produce green fuels and Solar assisted electricity generation. The content strikes a balance between theory, material synthesis and application with the central theme being solar fuels.
Download or read book Molecular Solar Fuels written by Thomas John Wydrzynski and published by Royal Society of Chemistry. This book was released on 2012 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts, this book presents the latest knowledge and chemical prospects in developing hydrogen as a solar fuel.
Download or read book Advances in Nanostructured Composites written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2019-04-30 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites and nanocomposites are used in cases where long durability and strength of components are required; i.e., where high stress levels, erosion processes and multiphase environments are present, including the parts under collision and impact, the parts under rotating motion and erosion (like excavation drills in oil and gas wells). The first volume of this book aims to provide a guide for fabrication of new nanocomposites mainly based on carbon nanotubes and graphene. The main topics of this volume are: Application of Nano-powders for Formation of Metal Matrix of Composites, Conjugated Polymer Nanocomposites, Biopolymer Nanocomposites, Dental Nanocomposites, Graphene-based Nanocomposites for Electrochemical Energy Storage, Polymer/Filler Composites for Optical Diffuse Reflectors, Synthesis and Applications of LDH-Based Nanocomposites, Rubber—CNT Nanocomposites, Nanocomposite Fibers with Carbon Nanotubes, Fabrications of Graphene Based Nanocomposites for Electrochemical Sensing of Drug Molecules, Recent Advances in Graphene Metal Oxide Based Nanocomposites.
Download or read book Light Water Hydrogen written by CRAIG GRIMES and published by Springer Science & Business Media. This book was released on 2007-12-03 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the field of solar production of hydrogen by water photo-splitting (photoelectrolysis) using semiconductor photoanodes. The emphasis of the discussion is on the use of nanotechnology in the field. The theories behind photocatalysis and photoelectrochemical processes responsible for hydrogen production are given in detail. This provides a state-of-the-art review of the semiconductor materials and methods used for improving the efficiency of the processes. The book also gives an account of the techniques used for making the nanostructures.
