Download or read book Inorganic Materials Chemistry written by Ekambaram Sambandan and published by iUniverse. This book was released on 2008-09 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: I would like to introduce my book to readers with emphasis on basic and research needed in inorganic materials chemistry. There are two main topics included in the book and these are inorganic and materials chemistry. There are several sub-topics on the two main topics. All the topics consist of basic chemistry, and research topics needed are included as and when required. It is essential to understand what you read and think about it to generate new ideas. Power of understanding the subject, thinking in successful direction and interest to work is required to succeed in these topics. I hope all the readers would certainly get into inorganic and materials chemistry field as a life career after reading this book. My sincere gratitude goes to my wife, Kalyani and my daughter, Nandhini for their encouragement in writing this book. Also, I want to acknowledge my professors, relatives, friends and so on for their support on my career. I can be reached at [email protected] for your comments and for the improvement of this book.
Download or read book Inorganic Materials Chemistry written by Mark T. Weller and published by . This book was released on 2011 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the chemistry of solid inorganic materials has become increasingly central to chemistry research, the subject has long been inadequately covered. This well-illustrated primer fills the gap with a comprehensive introduction to the subject.
Download or read book Inorganic Materials written by Duncan W. Bruce and published by John Wiley & Sons. This book was released on 1997-07-09 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the recent expansion in materials chemistry, this book addresses several of the vigorous areas of research in this field, where inorganic materials are central to the research. Each chapter provides an introduction to the subject under discussion and then develops the field to provide a sensible overview, with certain topics being expanded. Written by an international group of researchers the nine chapters cover such important areas as inorganic superconductors, magnetic materials, biogenic inorganic materials, polymeric co-ordination compounds, liquid crystals and precursors for electronic materials.
Download or read book Inorganic Materials Chemistry Desk Reference written by D. Sangeeta and published by CRC Press. This book was released on 2004-11-29 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: The updated second edition of the popular Inorganic Materials Chemistry Desk Reference remains a valuable resource in the preparation of solid-state inorganic materials by chemical processing techniques. It also expands upon new chemical precursors available to materials scientists, the applications of those materials, and existing or emerging topi
Download or read book The Inorganic Chemistry of Materials written by Paul J. van der Put and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: P.J. van der Put offers students an original introduction to materials chemistry that integrates the full range of inorganic chemistry. Technologists who need specific chemical facts to manipulate matter will also find this work invaluable as an easy-to-use reference. The text includes practical subjects of immediate use for materials such as bonding, morphogenesis, and design that more orthodox materials science volumes often leave out.
Download or read book Synthesis of Inorganic Materials written by Ulrich S. Schubert and published by John Wiley & Sons. This book was released on 2019-12-04 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces readers to the field of inorganic materials, while emphasizing synthesis and modification techniques Written from the chemist's point of view, this newly updated and completely revised fourth edition of Synthesis of Inorganic Materials provides a thorough and pedagogical introduction to the exciting and fast developing field of inorganic materials and features all of the latest developments. New to this edition is a chapter on self-assembly and self-organization, as well as all-new content on: demixing of glasses, non-classical crystallization, precursor chemistry, citrate-gel and Pechini liquid mix methods, ice-templating, and materials with hierarchical porosity. Synthesis of Inorganic Materials, 4th Edition features chapters covering: solid-state reactions; formation of solids from the gas phase; formation of solids from solutions and melts; preparation and modification of inorganic polymers; self-assembly and self-organization; templated materials; and nanostructured materials. There is also an extensive glossary to help bridge the gap between chemistry, solid state physics and materials science. In addition, a selection of books and review articles is provided at the end of each chapter as a starting point for more in-depth reading. -Gives the students a thorough overview of the fundamentals and the wide variety of different inorganic materials with applications in research as well as in industry -Every chapter is updated with new content -Includes a completely new chapter covering self-assembly and self-organization -Written by well-known and experienced authors who follow an intuitive and pedagogical approach Synthesis of Inorganic Materials, 4th Edition is a valuable resource for advanced undergraduate students as well as masters and graduate students of inorganic chemistry and materials science.
Download or read book Essentials of Inorganic Materials Synthesis written by C. N. R. Rao and published by John Wiley & Sons. This book was released on 2015-04-06 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compact handbook describes all the important methods of synthesis employed today for synthesizing inorganic materials. Some features: Focuses on modern inorganic materials with applications in nanotechnology, energy materials, and sustainability Synthesis is a crucial component of materials science and technology; this book provides a simple introduction as well as an updated description of methods Written in a very simple style, providing references to the literature to get details of the methods of preparation when required
Download or read book Short Notes on Applied and Advanced Inorganic Materials Chemistry written by Ekambaram Sambandan and published by . This book was released on 2006-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: These short notes on current inorganic materials chemistry are written for mainly those who are interested to know about inorganic materials chemistry. I have taken steps to write it in simple words, and this is ease to read and is understandable very well. Thus, I start it with various experimental methods available to synthesize inorganic oxides and non-oxides. Then, very briefly, three important structures are described along with Bragg¿s equation. It follows then some recent developments that have been and will be occurred. Finally, new directions required in the area of open framework materials and photo-splitting of water are summarized. I assume that undergraduate students might get interested to pursue further research in inorganic materials chemistry after reading the short notes.
Download or read book Inorganic Materials Chemistry written by M.T. Weller and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inorganic Materials Chemistry written by Mark T. Weller and published by . This book was released on 2002 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis of Inorganic Materials written by Ulrich S. Schubert and published by John Wiley & Sons. This book was released on 2019-08-27 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces readers to the field of inorganic materials, while emphasizing synthesis and modification techniques Written from the chemist's point of view, this newly updated and completely revised fourth edition of Synthesis of Inorganic Materials provides a thorough and pedagogical introduction to the exciting and fast developing field of inorganic materials and features all of the latest developments. New to this edition is a chapter on self-assembly and self-organization, as well as all-new content on: demixing of glasses, non-classical crystallization, precursor chemistry, citrate-gel and Pechini liquid mix methods, ice-templating, and materials with hierarchical porosity. Synthesis of Inorganic Materials, 4th Edition features chapters covering: solid-state reactions; formation of solids from the gas phase; formation of solids from solutions and melts; preparation and modification of inorganic polymers; self-assembly and self-organization; templated materials; and nanostructured materials. There is also an extensive glossary to help bridge the gap between chemistry, solid state physics and materials science. In addition, a selection of books and review articles is provided at the end of each chapter as a starting point for more in-depth reading. -Gives the students a thorough overview of the fundamentals and the wide variety of different inorganic materials with applications in research as well as in industry -Every chapter is updated with new content -Includes a completely new chapter covering self-assembly and self-organization -Written by well-known and experienced authors who follow an intuitive and pedagogical approach Synthesis of Inorganic Materials, 4th Edition is a valuable resource for advanced undergraduate students as well as masters and graduate students of inorganic chemistry and materials science.
Download or read book The Chemistry of Inorganic Biomaterials written by Christopher Spicer and published by Royal Society of Chemistry. This book was released on 2021-08-18 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book overviews the underlying chemistry behind the most common and cutting-edge inorganic materials in current use, or approaching use, in vivo.
Download or read book Principles of Inorganic Materials Design written by John N. Lalena and published by John Wiley & Sons. This book was released on 2005-05-13 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique interdisciplinary approach to inorganic materialsdesign Textbooks intended for the training of chemists in the inorganicmaterials field often omit many relevant topics. With itsinterdisciplinary approach, this book fills that gap by presentingconcepts from chemistry, physics, materials science, metallurgy,and ceramics in a unified treatment targeted towards the chemistryaudience. Semiconductors, metal alloys and intermetallics, as wellas ceramic substances are covered. Accordingly, the book shouldalso be useful to students and working professionals in a varietyof other disciplines. This book discusses a number of topics that are pertinent to thedesign of new inorganic materials but are typically not covered instandard solid-state chemistry books. The authors start with anintroduction to structure at the mesoscopic level and progress tosmaller-length scales. Next, detailed consideration is given toboth phenomenological and atomistic-level descriptions of transportproperties, the metal-nonmetal transition, magnetic and dielectricproperties, optical properties, and mechanical properties. Finally,the authors present introductions to phase equilibria, synthesis,and nanomaterials. Other features include: * Worked examples demonstrating concepts unfamiliar to thechemist * Extensive references to related literature, leading readers tomore in-depth coverage of particular topics * Biographies introducing the reader to great contributors to thefield of inorganic materials science in the twentieth century With their interdisciplinary approach, the authors have set thegroundwork for communication and understanding among professionalsin varied disciplines who are involved with inorganic materialsengineering. Armed with this publication, students and researchersin inorganic and physical chemistry, physics, materials science,and engineering will be better equipped to face today's complexdesign challenges. This textbook is appropriate for senior-levelundergraduate and graduate course work.
Download or read book Modern Inorganic Synthetic Chemistry written by Ruren Xu and published by Elsevier. This book was released on 2017-02-11 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Inorganic Synthetic Chemistry, Second Edition captures, in five distinct sections, the latest advancements in inorganic synthetic chemistry, providing materials chemists, chemical engineers, and materials scientists with a valuable reference source to help them advance their research efforts and achieve breakthroughs. Section one includes six chapters centering on synthetic chemistry under specific conditions, such as high-temperature, low-temperature and cryogenic, hydrothermal and solvothermal, high-pressure, photochemical and fusion conditions. Section two focuses on the synthesis and related chemistry problems of highly distinct categories of inorganic compounds, including superheavy elements, coordination compounds and coordination polymers, cluster compounds, organometallic compounds, inorganic polymers, and nonstoichiometric compounds. Section three elaborates on the synthetic chemistry of five important classes of inorganic functional materials, namely, ordered porous materials, carbon materials, advanced ceramic materials, host-guest materials, and hierarchically structured materials. Section four consists of four chapters where the synthesis of functional inorganic aggregates is discussed, giving special attention to the growth of single crystals, assembly of nanomaterials, and preparation of amorphous materials and membranes. The new edition’s biggest highlight is Section five where the frontier in inorganic synthetic chemistry is reviewed by focusing on biomimetic synthesis and rationally designed synthesis. Focuses on the chemistry of inorganic synthesis, assembly, and organization of wide-ranging inorganic systems Covers all major methodologies of inorganic synthesis Provides state-of-the-art synthetic methods Includes real examples in the organization of complex inorganic functional materials Contains more than 4000 references that are all highly reflective of the latest advancement in inorganic synthetic chemistry Presents a comprehensive coverage of the key issues involved in modern inorganic synthetic chemistry as written by experts in the field
Download or read book Materials Chemistry written by Bradley D. Fahlman and published by Springer. This book was released on 2018-08-28 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this successful textbook continues to build on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field — in a concise format. The 3rd edition offers significant updates throughout, with expanded sections on sustainability, energy storage, metal-organic frameworks, solid electrolytes, solvothermal/microwave syntheses, integrated circuits, and nanotoxicity. Most appropriate for Junior/Senior undergraduate students, as well as first-year graduate students in chemistry, physics, or engineering fields, Materials Chemistry may also serve as a valuable reference to industrial researchers. Each chapter concludes with a section that describes important materials applications, and an updated list of thought-provoking questions.
Download or read book Inorganic Materials Synthesis and Fabrication written by John N. Lalena and published by John Wiley & Sons. This book was released on 2008-01-09 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date, single-source reference on the preparation of single-phase inorganic materials covers the most important methods and techniques in solid-state synthesis and materials fabrication. Presenting both fundamental background and advanced methodologies, it describes the principles of crystallography, thermodynamics, and kinetics required, addresses crystallographic and microstructural considerations, and describes various kinds of reactions. This is an excellent text for materials science and engineering, chemistry, and physics students, as well as a practical, hands-on reference for working professionals.
Download or read book The Production and Processing of Inorganic Materials written by James Evans and published by Springer. This book was released on 2016-12-06 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guiding readers from the significance, history, and sources of materials to advanced materials and processes, this textbook looks at the production and primary processing of inorganic materials, such as ceramics, metals, silicon, and some composite materials. The text encourages instructors to teach the production of all types of inorganic materials as one. While recognizing the differences between producing various types of materials, the authors focus on the commonality of thermodynamics, kinetics, transport phenomena, phase equilibria and transformation, process engineering, and surface chemistry to all inorganic materials. The text focuses on fundamentals and how fundamentals can be applied to understand how the major inorganic materials are produced and the initial stages of their processing. Understanding of these fundamentals will equip students for engineering future processes for producing materials or for studying the processing of the many less common materials not examined in this text. The text is intended for use in an undergraduate course at the junior or senior level, but will also serve as a useful introductory and reference work for graduate students and practicing scientists and engineers.
