Download or read book Innovative Pre Treatment Techniques to Prevent Corrosion of Metallic Surfaces written by L Fedrizzi and published by Elsevier. This book was released on 2014-01-23 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has long been a need for effective pre-treatment techniques to prevent corrosion of metallic surfaces. This important volume discusses key research on the development of pre-treatment techniques for a range of metals. Chapters review various coatings and preparation methods for aluminium and aluminium alloys such as silane films, sol-gel coatings and magnesium-rich primers. Further chapters discuss the pre-treatment methods for steel, copper and magnesium alloys. The book also assesses methods for monitoring the effectiveness of pre-treatments, covering dissolution-precipitation mechanisms and their electrochemical behaviour. Innovative pre-treatment techniques to prevent corrosion of metallic surfaces is a valuable reference for all those concerned with corrosion problems and the use of pre-treatment techniques in the coatings industry. Reviews coating and preparation methods for alluminium alloys An authoritative overview of pre-treatments for steel, copper, zinc and magnesium alloys
Download or read book Principles of Metal Surface Treatment and Protection written by D. R. Gabe and published by Elsevier. This book was released on 2014-07-22 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Metal Surface Treatment and Protection deals with the principles of metal surface treatment and protection. Topics covered range from electrodeposition and hot dip coating to diffusion and non-metallic coatings, as well as oxide and conversion coatings. The theory of corrosion protection is also discussed. Comprised of eight chapters, this volume begins with an overview of the corrosion of metals and the scope of protection against corrosion, followed by a detailed treatment of electrodeposition. The discussion then turns to the principles of hot dipping as a coating method; the formation of a diffusion coating; and the role of a non-metallic coating in corrosion protection. Subsequent chapters focus on the protection of oxide films against corrosion by means of anodizing, phosphatizing, and the use of tin free steel; testing and selection of a particular coating for corrosion resistance applications; and the theory of corrosion protection. This book is intended for metal-finishing scientists and students of metallurgy and metal finishing.
Download or read book High Performance Organic Coatings written by A S Khanna and published by Elsevier. This book was released on 2008-07-09 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Paint coatings remain the most widely used way of protecting steel structures from corrosion. This important book reviews the range of organic paint coatings and how their performance can be enhanced to provide effective and lasting protection. The book begins by reviewing key factors affecting the success of a coating, including surface preparation, methods of application, selecting an appropriate paint and testing its effectiveness. It also discusses why coatings fail, including how they degrade, and what can be done to prevent these problems. Part two describes the main types of coating and how their performance can be enhanced, including epoxies, polyester, glass flake, fluoropolymer, polysiloxane and waterborne coatings. The final part of the book looks at applications of high-performance organic coatings in such areas as reinforced concrete, pipelines, marine and automotive engineering. With its distinguished editor and international team of contributors, High-performance organic coatings is a valuable reference for all those concerned with preventing corrosion in steel and other metal structures. Reviews the factors affecting the success of a coating Describes the main types of coating and how their performance can be enhanced, including epoxies, polyester and waterborne coatings Examines applications in such areas as reinforced concrete pipelines and marine engineering
Download or read book Techniques for Corrosion Monitoring written by and published by Elsevier. This book was released on 2008-02-01 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion monitoring techniques play a key role in efforts to combat corrosion, which can have major economic and safety implications. This important book starts with a review of corrosion fundamentals and provides a four-part comprehensive analysis of a wide range of methods for corrosion monitoring, including practical applications and case studies. The first part of the book reviews electrochemical techniques for corrosion monitoring, such as polarization techniques, potentiometric methods, electrochemical noise and harmonic analyses, galvanic sensors, differential flow through cells and multielectrode systems. A second group of chapters analyses the physical or chemical methods of corrosion monitoring. These include gravimetric, radioactive tracer, hydrogen permeation, electrical resistance and rotating cage techniques. Part II also includes a chapter on the innovative nondestructive evaluation technologies that can be used to monitor corrosion. Part III examines corrosion monitoring in special environments such as microbial systems, concrete and soil, and remote monitoring and model predictions. A final group of chapters includes various case studies covering ways in which corrosion monitoring can be applied to engine exhaust systems, cooling water systems, pipelines, equipment in chemical plants, and other real world systems. With its distinguished editor and international team of contributors, Techniques for corrosion monitoring is a valuable reference guide for engineers and scientific and technical personnel who deal with corrosion in such areas as automotive engineering, power generation, water suppliers and the petrochemical industry. Provides a comprehensive analysis of the range of techniques for corrosion monitoring Specific case studies are included to highlight the main issues A valuable reference guide for engineers, scientific and technical personnel who deal with corrosion
Download or read book Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation written by Jean-Pierre Celis and published by Routledge. This book was released on 2017-07-05 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first edition of Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation: A Handbook treats in a clear, concise, and practical manner an important material degradation and protection matter. It is designed as a handbook and provides a well structured approach of the basics needed to investigate the tribocorrosion behavior of passivating materials, and to conduct in a correct way a laboratory investigation on it. It provides answers on practical and theoretical approaches of tribocorrosion phenomena to engineers and medical persons involved with material assemblies subjected to aggressive environmental and mechanical conditions. For academic researchers it is a pertinent tool assisting them in how they can perform a tribocorrosion investigation and obtain results that are correctly interpreted and can be exchanged. Different parts of the book are illustrated with practical examples. This handbook is truly an indispensable guide for every professional who comes into contact with the complex material degradation and protection processes that take place under combined corrosion and wear conditions. Fields of interest include: transportation (aeronautics, maritime, rail, automotive), medical implants (orthopaedics, dentistry), biochemistry, food production, energy production, and machining. The coordination of this handbook writing was done by Professor Jean-Pierre Celis (Katholieke Universiteit Leuven, Belgium) and Professor Pierre Ponthiaux (Ecole Centrale Paris, France) assisted by twelve European experts who contributed jointly to the nine chapters of this handbook. Main topics dealt with are tribocorrosion phenomena in medical and industrial sectors, depassivation and repassivation phenomena, impact on synergism in tribocorrosion, specific testing techniques, coupling tribology-to-corrosion, design of a testing protocol, and normalisation.
Download or read book Corrosion Performance of Metals for the Marine Environment EFC 63 written by Roger Francis and published by CRC Press. This book was released on 2019-05-14 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers with an interest in the marine environment can take advantage of many years of accumulated corrosion experience in a quick and concise manner with this publication. It covers the corrosion behavior in sea water of steel, stainless steel and cast iron as well as alloys of copper, aluminum, nickel and titanium. Applications, commonly-used alloy compositions and mechanical properties are also covered for each alloy system, plus a special section is devoted to galvanic corrosion and its avoidance.
Download or read book Corrosion Control Through Organic Coatings written by Ole Øystein Knudsen and published by CRC Press. This book was released on 2017-04-28 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Control Through Organic Coatings, Second Edition provides readers with useful knowledge of the practical aspects of corrosion protection with organic coatings and links this to ongoing research and development. Thoroughly updated and reorganized to reflect the latest advances, this new edition expands its coverage with new chapters on coating degradation, protective properties, coatings for submerged service, powder coatings, and chemical pretreatment. Maintaining its authoritative treatment of the subject, the book reviews such topics as corrosion-protective pigments, waterborne coatings, weathering, aging, and degradation of paint, and environmental impact of commonly used techniques including dry- and wet-abrasive blasting and hydrojetting. It also discusses theory and practice of accelerated testing of coatings to assist readers in developing more accurate tests and determine corrosion protection performance.
Download or read book Corrosion and Conservation of Cultural Heritage Metallic Artefacts written by P Dillmann and published by Elsevier. This book was released on 2013-07-31 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conservation of metallic archaeological and historic artefacts is a major challenge whether they are ancient bronzes or relics of our more recent industrial past. Based on the work of Working Party 21 Corrosion of Archaeological and Historical Artefacts within the European Federation of Corrosion (EFC), this important book summarises key recent research on analytical techniques, understanding corrosion processes and preventing the corrosion of cultural heritage metallic artefacts.After an introductory part on some of the key issues in this area, part two reviews the range of analytical techniques for measuring and analysing corrosion processes, including time resolved spectroelectrochemistry, voltammetry and laser induced breakdown spectroscopy. Part three reviews different types of corrosion processes for a range of artefacts, whilst part four discusses on-site monitoring techniques. The final part of the book summaries a range of conservation techniques and strategies to conserve cultural heritage metallic artefacts.Corrosion and conservation of cultural heritage metallic artefacts is an important reference for all those involved in archaeology and conservation, including governments, museums as well as those undertaking research in archaeology and corrosion science. Summarises key research on analytical techniques for measuring and analysing corrosion processes Provides detailed understanding of corrosion processes and corrosion prevention Discusses on-site monitoring techniques
Download or read book Corrosion in Amine Treating Units written by Johan van Roij and published by Woodhead Publishing. This book was released on 2021-10-27 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion in Amine Treating Units, Second Edition presents a fully updated resource with a broadened focus that includes corrosion in not only refining operations, but also in oil and gas production. New sections have been added on inhibition, corrosion modeling and metallic coatings. More detailed descriptions of the degradation mechanisms and Integrity Operating Windows (IOW) are now included, as is more in-depth information on guidelines for what sections and locations are most vulnerable to corrosion and how to control corrosion in amine units e.g., using corrosion Loop descriptions and providing indicative integrity operating windows for operation to achieve a suitable life expectance. Provides new insights on the degradation mechanisms occurring in amine treating units and the locations within the unit where they occur Discusses how to mitigate and control corrosion in amine units Provides guidance for setting up corrosion control documents and inspection and maintenance plans for amine treating units
Download or read book Corrosion Management of Seawater Cooling Systems written by Francois Ropital and published by Elsevier. This book was released on 2024-06-28 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Management of Seawater Cooling Systems, Volume 71 provides an overview on main seawater heat exchanger systems, different forms of corrosion, biocide treatments, corrosion, scale inhibitors, materials used, coatings and cathodic protection, maintenance, and monitoring and control. The book will be a valuable reference resource for academics, technicians and engineers who are interested in the corrosion management of seawater cooling systems. The evolution of practices in terms of sustainability, materials choice, treatment selection and changes to regulations have demonstrated the need to establish this new guide on recommended best practices that support corrosion management and the development of seawater heat exchangers. Seawater is considered an attractive resource for utilities in many industries such as power plants, refineries and chemical plants. Seawater cooling systems are used in heat exchangers, in once-through cooling water systems, and for recirculating cooling water systems. The metallurgy and materials used in these facilities need to be compatible with seawater and allow good corrosion control. As seawater composition and suspended solids can cause corrosion, scaling, fouling, microbiological growth and macrofouling problems, this book is a necessary addition to the conversation. Covers key technological developments in corrosion management of seawater cooling systems Includes coverage of seawater heat exchangers“/li> Provides information on many different forms of corrosion Presents tactics for the selection of materials, corrosion protections (inhibitors, coatings, cathodic protection) Discusses maintenance, control, monitoring and inspection
Download or read book Corrosion Monitoring in Nuclear Systems EFC 56 written by Stefan Ritter and published by Routledge. This book was released on 2017-09-20 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion remains one of the key issues affecting the performance and availability of nuclear power plants. Therefore, reliable in-plant corrosion monitoring methods are essential both for the future operation of existing plants and to ensure the safety of future nuclear waste disposal systems. In two parts, this book was stimulated by a workshop organised by EFC Working Party 4 on Nuclear Corrosion and the European Cooperative Group on Corrosion Monitoring of Nuclear Materials (EGC-COMON). The first part deals mainly with research into the detection of stress corrosion crack initiation in nuclear power plant environments (essentially high temperature water at around 300 °C) by various methods, particularly the electrochemical noise technique but also including the electrochemical impedance, acoustic emission and direct current potential drop methods. The second part addresses the goal to develop in-situ techniques and includes examples of the application of electrochemical corrosion potential monitoring. This book will be of particular interest to scientists and engineers concerned with the mitigation of corrosion in nuclear systems.
Download or read book Nuclear Corrosion written by Stefan Ritter and published by Woodhead Publishing. This book was released on 2020-08-14 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Corrosion: Research, Progress and Challenges, part of the “Green Book series of the EFC, builds upon the foundations of the very first book published in this series in 1989 (“Number 1 - Corrosion in the Nuclear Industry ). This newest volume provides an overview on state-of-the-art research in some of the most important areas of nuclear corrosion. Chapters covered include aging phenomena in light water reactors, reprocessing plants, nuclear waste disposal, and supercritical water and liquid metal systems. This book will be a vital resource for both researchers and engineers working within the nuclear field in both academic and industrial environments. Discusses industry related aspects of materials in nuclear power generation and how these materials react with the environment Provides comprehensive coverage of the topic as written by noted experts in the field Includes coverage of nuclear waste corrosion
Download or read book Corrosion Under Insulation CUI Guidelines written by and published by Woodhead Publishing. This book was released on 2015-11-26 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion-under-insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. In the first edition of this book published in 2008, the EFC Working Parties WP13 and WP15 engaged together to provide guidelines on managing CUI with contributions from a number of European refining, petrochemical and offshore companies. The guidelines are intended for use on all plants and installation that contain insulated vessels, piping and equipment. The guidelines cover a risk-based inspection methodology for CUI, inspection techniques and recommended best practice for mitigating CUI, including design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials and protection guards. The guidelines also include case studies. The original document first published in 2008 was very successful and provided an important resource in the continuing battle to mitigate CUI. Many members of the EFC corrosion community requested an update and this has taken between 18-24 months to do so. Hopefully this revised document will continue to serve the community providing a practical source of information on how to monitor and manage insulated systems. Revised and fully updated technical guidance on managing CUI provided by EFC Working Parties WP13 and WP 15 Contributions from a number of European refining, petrochemical and offshore companies Extensive appendices that provide additional practical guidance on the implementation of corrosion-under-insulation best practice, collected practical expertise and case studies
Download or read book Corrosion Modelling with Cellular Automata written by Damien Feron and published by Elsevier. This book was released on 2024-03-18 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Modelling with Cellular Automata bridges the gap between finer scales based on atomic physics and the larger-scale based on physico-chemical properties of materials and their environments. The book describes the simulation and modeling of corrosion phenomena by cellular automata and underlines the collaborative and interdisciplinary relationships that underpin them. It explores the major achievements that have been performed to date, covers basic knowledge on cellular automata and corrosion phenomena, and includes sections on CA modeling of generalized and uniform corrosion in 2D and 3D under various conditions, including aqueous environments and high temperature processes. Finals sections present examples on the use of cellular automata for modeling localized corrosion as well as recent developments on intergranular corrosion. There is also a review on the use of CA for modeling pitting corrosion. Focuses on the use of cellular automata for modeling corrosion Covers recent advances in modeling generalized corrosion with cellular automata Illustrates how cellular automata can be used to model localized corrosion (pitting and intergranular corrosion) Spans various length scales from atomistic to mesoscale
Download or read book Stress Corrosion Cracking of Nickel Based Alloys in Water cooled Nuclear Reactors written by Damien Feron and published by Woodhead Publishing. This book was released on 2016-01-30 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stress Corrosion Cracking of Nickel Based Alloys in Water-Cooled Nuclear Reactors: The Coriou Effect presents the latest information on brittle failure of metals in corrosive chemical environments under the influence of tensile stresses. Nickel alloys are more resistant to SCC as well as high temperatures and have been widely used in more challenging environments such as nuclear power plants. However, these alloys can suffer SCC under certain conditions, resulting in component failure. A key figure in understanding the mechanisms of SCC in nickel alloys in water-cooled nuclear reactors is Henri Coriou of the CEA, France’s leading center for nuclear research. This book assesses his work in the context of the latest research on SCC in nickel alloys in nuclear power plants. Up-to-date reviews of recent research findings from leading experts in the field Authoritative and comprehensively reviewed by the Working Party 4 on Nuclear Corrosion Showcases the excellent quality and technical accomplishments of Henri Coriou and CEA
Download or read book Inter Laboratory Study on Electrochemical Methods for the Characterization of Cocrmo Biomedical Alloys in Simulated Body Fluids written by A. Igual Munoz and published by CRC Press. This book was released on 2020-11-25 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special issue of Corrosion Engineering Science and Technology is dedicated to the study of corrosion of objects from historical sites. The issue contains contributions from the 2009 EUROCORR session on Corrosion of Archaeological and Heritage Artefacts organised by the European Federation of Corrosion's working party and commissioned articles on other key issues. The objective is to give the reader a broad understanding of corrosion of ancient materials, for the most part metal but also glass. Articles shed light on a range of analytical approaches related to the study of the complex systems that make up historical artifacts. In order to arrive at an understanding of the nanometric organisation of rust layers and interphases, such studies must be approached on a macroscopic scale. Techniques used include; macrophotography, synchrotron radiation and transmission electron microscopy (TEM) that ensure results that are both exhaustive and representative of particular observations. This issue demonstrates the wealth of approaches possible in the study of the corrosion of ancient materials.
Download or read book Mechanical and Electro chemical Interactions under Tribocorrosion written by Pierre Ponthiaux and published by Woodhead Publishing. This book was released on 2021-08-22 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical and Electro-chemical Interactions under Tribocorrosion: From Measurements to Modelling for Building a Relevant Monitoring Approach looks at progress in the field of tribocorrosion. The work is a result of the efforts of the European tribocorrosion community gathered under the auspices of the European Corrosion Federation (EFC) within WP18 Tribocorrosion. In addition to the handbook, Testing Tribocorrosion of Passivating Materials Supporting Research and industrial Innovation published in 2012, this release describes the latest scientific approaches recognized and validated experimentally to address tribocorrosion. Sections look at the phenomena of coupling through an understanding of the associated mechanisms and how to identify variables. Final sections cover strategies to control and/or extend the life of structures in a multi-process coupling situation and an in-depth description of the current state-of-the-art on modeling approaches of tribocorrosion. Reviews the multidisciplinary basics of tribocorrosion Includes insights into novel experimental approaches Provides insights into advanced modeling techniques of tribocorrosion Looks at the implication of results in the development of the monitoring of tribocorrosion