Download or read book Innovative design and construction technologies written by Ingrid Paoletti and published by Maggioli Editore. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Innovative Design and Construction Technologies written by Ingrid Paoletti and published by . This book was released on 2009 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainable Construction Technologies written by Vivian Y. Tam and published by Butterworth-Heinemann. This book was released on 2019-01-03 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Construction Technologies: Life-Cycle Assessment provides practitioners with a tool to help them select technologies that are financially advantageous even though they have a higher initial cost. Chapters provide an overview of LCA and how it can be used in conjunction with other indicators to manage construction. Topics covered include indoor environment quality, energy efficiency, transport, water reuse, materials, land use and ecology, and more. The book presents a valuable tool for construction professionals and researchers that want to apply sustainable construction techniques to their projects. Practitioners will find the international case studies and discussions of worldwide regulation and standards particularly useful. Provides a framework for analyzing sustainable construction technologies and economic viability Introduces key credit criteria for different sustainable construction technologies Covers the most relevant construction areas Includes technologies that can be employed during the process of construction, or to the product of the construction process, i.e. buildings Analyzes international rating systems and provides supporting case studies

Download or read book Industry 4 0 Solutions for Building Design and Construction written by Farzad Pour Rahimian and published by Routledge. This book was released on 2021-12-20 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth results and case studies in innovation from actual work undertaken in collaboration with industry partners in Architecture, Engineering, and Construction (AEC). Scientific advances and innovative technologies in the sector are key to shaping the changes emerging as a result of Industry 4.0. Mainstream Building Information Management (BIM) is seen as a vehicle for addressing issues such as industry fragmentation, value-driven solutions, decision-making, client engagement, and design/process flow; however, advanced simulation, computer vision, Internet of Things (IoT), blockchain, machine learning, deep learning, and linked data all provide immense opportunities for dealing with these challenges and can provide evidenced-based innovative solutions not seen before. These technologies are perceived as the “true” enablers of future practice, but only recently has the AEC sector recognised terms such as “golden key” and “golden thread” as part of BIM processes and workflows. This book builds on the success of a number of initiatives and projects by the authors, which include seminal findings from the literature, research and development, and practice-based solutions produced for industry. It presents these findings through real projects and case studies developed by the authors and reports on how these technologies made a real-world impact. The chapters and cases in the book are developed around these overarching themes: • BIM and AEC Design and Optimisation: Application of Artificial Intelligence in Design • BIM and XR as Advanced Visualisation and Simulation Tools • Design Informatics and Advancements in BIM Authoring • Green Building Assessment: Emerging Design Support Tools • Computer Vision and Image Processing for Expediting Project Management and Operations • Blockchain, Big Data, and IoT for Facilitated Project Management • BIM Strategies and Leveraged Solutions This book is a timely and relevant synthesis of a number of cogent subjects underpinning the paradigm shift needed for the AEC industry and is essential reading for all involved in the sector. It is particularly suited for use in Masters-level programs in Architecture, Engineering, and Construction.

Download or read book Innovative Design and Construction Technologies Building Complex Shapes written by and published by . This book was released on 2009 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Integrating Innovation in Architecture written by Ajla Aksamija and published by John Wiley & Sons. This book was released on 2017-03-13 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s design professionals are faced with challenges on all fronts. They need not only to keep in step with rapid technological changes and the current revolution in design and construction processes, but to lead the industry. This means actively seeking to innovate through design research, raising the bar in building performance and adopting advanced technologies in their practice. In a constant drive to improve design processes and services, how is it possible to implement innovations? And, moreover, to assimilate them in such a way that design, methods and technologies remain fully integrated? Focusing on innovations in architecture, this book covers new materials and design methods, advances in computational design practices, innovations in building technologies and construction techniques, and the integration of research with design. Moreover, it discusses strategies for integrating innovation into design practices, risks and economic impacts. Through numerous case studies, it illustrates how innovations have been implemented on actual architectural projects, and how design and technical innovations are used to improve building performance, as well as design practices in cutting-edge architectural and engineering firms. Projects of all scales and building types are discussed in the book, ranging from small-scale installations, academic and commercial buildings to large-scale mixed-use, healthcare, civic, academic, scientific research and sports facilities. Work from design firms around the globe and of various scales is discussed in the book, including for example Asymptote Architecture, cepezed, CO Architects, Consarc Architects, FAAB Architektura, Gerber Architekten, HOK, IDOM-ACXT, MAD Architects, Morphosis Architects, SDA | Synthesis Design + Architecture, Studiotrope, Perkins+Will, Richter Dahl Rocha & Associés, Snøhetta, Rob Ley Studio, Trahan Architects, UNStudio and Zaha Hadid Architects, among many others.

Download or read book The Role of Public Agencies in Fostering New Technology and Innovation in Building written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores innovation in the U.S. construction-related industries (i.e., design services, construction, building materials and products manufacture, and facilities operation and maintenance) and recommends a strategy for fostering new technology. These industries account for about ten percent of the U.S. economy; federal agencies themselves spend some $15 billion annually on construction. A government strategy based on federal agencies that encourage applications of new technology for their own projects, activities to enhance the pursuit and effective transfer of new technology to the U.S. private sector, and increased support for targeted efforts to develop new technologies in specific areas will yield many benefits. These include better cost, quality, and performance in government facilities, generally improved quality of life, and enhanced U.S. industrial competitiveness in international markets.

Download or read book Digital Transformation of the Design Construction and Management Processes of the Built Environment written by Bruno Daniotti and published by Springer Nature. This book was released on 2019-01-01 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book focuses on the development of methods, interoperable and integrated ICT tools, and survey techniques for optimal management of the building process. The construction sector is facing an increasing demand for major innovations in terms of digital dematerialization and technologies such as the Internet of Things, big data, advanced manufacturing, robotics, 3D printing, blockchain technologies and artificial intelligence. The demand for simplification and transparency in information management and for the rationalization and optimization of very fragmented and splintered processes is a key driver for digitization. The book describes the contribution of the ABC Department of the Polytechnic University of Milan (Politecnico di Milano) to R&D activities regarding methods and ICT tools for the interoperable management of the different phases of the building process, including design, construction, and management. Informative case studies complement the theoretical discussion. The book will be of interest to all stakeholders in the building process - owners, designers, constructors, and faculty managers - as well as the research sector.

Download or read book Digital Fabrication in Architecture Engineering and Construction written by Luca Caneparo and published by Springer Science & Business Media. This book was released on 2013-10-02 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital technologies are changing the relationship between design and construction: with computer models, CAD/CAM, and prototyping, designers can gain direct control of building and construction processes. The ability to digitally model designs, and thus to use those models directly in the context of production, creates a synthesis between design and construction in keeping with the tradition of the close relationship between design and craftsmanship, between the quality of the design and the rules of the craft. The evolution of the culture of design and construction is the underlying theme of this book. The aim is to discuss the direction that innovation is now taking, with a particular focus on today’s cutting-edge architectures. The method addresses the ways in which different societies have dealt with the issues of their age regarding design and construction, the different contributions provided by various techniques, and with them the meanings expressed by the architecture. As building design using digital tools requires specific skills in the fabrication processes and in the languages used by information technology, the book also offers a practical guide to new methods and techniques of managing and controlling fabrication for AEC. A systematic analysis of new skills used in the design process presents an overview of opportunities for architects and engineers. By collecting information on significant projects and analyzing them, the book explores the technical and artistic potential of digital technology. The cases studied are the outcomes of groundbreaking projects which were able to give form and significance to technological research. They show that digital tools are not the exclusive prerogative of large firms but can also be adopted by teams working across small and medium-sized firms – firms which have been able to use informed research to link innovative design with the possibilities offered by digital fabrication in architecture.

Download or read book Rethinking Building Skins written by Eugenia Gasparri and published by Woodhead Publishing. This book was released on 2021-12-05 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rethinking Building Skins: Transformative Technologies and Research Trajectories provides a comprehensive collection of the most relevant and forward-looking research in the field of façade design and construction today, with a focus on both product and process innovation. The book brings together the expertise, creativity, and critical thinking of more than fifty global innovators from both academia and industry, to guide the reader in translating research into practice. It identifies new opportunities for the construction sector to respond to present challenges, towards a more sustainable, efficient, connected, and safe future. Introduces the reader to the role of façades with respect to the main challenges ahead Provides an overview of the major façade technological advancements throughout history and identifies prospective research trajectories Includes interviews with key industry players from different backgrounds and expertise Showcases a comprehensive range of leading research topics in the field, organised by product and process innovation Covers major innovations across the value chain including façade design, fabrication, construction, operation and maintenance, and end-of-life Contributes towards the definition of an international research agenda and identifies emerging market opportunities for the façade industry

Download or read book Technology Design and Process Innovation in the Built Environment written by Peter Newton and published by Routledge. This book was released on 2009-02-09 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings and infrastructure represent principal assets of any national economy as well as prime sources of environmental degradation. Making them more sustainable represents a key challenge for the construction, planning and design industries and governments at all levels; and the rapid urbanisation of the 21st century has turned this into a global challenge. This book embodies the results of a major research programme by members of the Australia Co-operative Research Centre for Construction Innovation and its global partners, presented for an international audience of construction researchers, senior professionals and advanced students. It covers four themes, applied to regeneration as well as to new build, and within the overall theme of Innovation: Sustainable Materials and Manufactures, focusing on building material products, their manufacture and assembly – and the reduction of their ecological ‘fingerprints’, the extension of their service lives, and their re-use and recyclability. It also explores the prospects for applying the principles of the assembly line. Virtual Design, Construction and Management, viewed as increasing sustainable development through automation, enhanced collaboration (such as virtual design teams), real time BL performance assessment during design, simulation of the construction process, life-cycle management of project information (zero information loss) risk minimisation, and increased potential for innovation and value adding. Integrating Design, Construction and Facility Management over the Project Life Cycle, by converging ICT, design science engineering and sustainability science. Integration across spatial scales, enabling building–infrastructure synergies (such as water and energy efficiency). Convergences between IT and design and operational processes are also viewed as a key platform increased sustainability.

Download or read book Construction Innovation and Process Improvement written by Akintola Akintoye and published by John Wiley & Sons. This book was released on 2012-04-30 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation in construction is essential for growth. The industry strives to remain competitive using a variety of approaches and needs to engage structured initiatives linked to proven innovation concepts, techniques and applications. Even in mature markets like the Architecture, Engineering and Construction (AEC) sector, where business behaviour is generally considered as being risk averse, it is increasingly important to embed innovation into mainstream business practices. In Construction Innovation and Process Improvement a number of wide ranging issues from construction practice in different countries with different contexts are presented to provide a rich collection of literature embracing theory and practice. Chapters are divided into three broad themes of construction innovation relating to: Theory and Practice; Process Drivers; and Future Technologies. Several questions are posed, including for example: What is particularly unique about construction innovation in theory and practice? What are the major drivers of construction innovation? What factors are needed to support and deliver future construction technologies? In attempting to respond to such questions, the book sheds new light on these challenges, and provides readers with a number of ways forward, especially cognisant of the increased role of globalisation, the enhanced impact of knowledge, and importance of innovation. All these can have a significant impact on strategic decision-making, competitive advantage, and sustainable policies and practices. Part One deals with change management, technology, sustainable construction, and supply chain management; Part Two addresses innovation and process improvement drivers, including strategic management, concurrent engineering, risk management, innovative procurement, knowledge management; Part Three explores future technologies in construction – and particularly, how these can be harnessed and leveraged to help procure innovation and process improvement.

Download or read book Innovation in Construction written by Andre Manseau and published by Routledge. This book was released on 2003-09-02 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: How can innovation in the construction industry be strengthened? What instruments and approaches are being used by governments to promote it? What works and under what circumstances? These key questions have profound implications. This book presents a framework for the analysis of innovation models and systems in construction and an international comparison of these systems, with a focus on their application in practical policy development.

Download or read book Advances in Building Construction Technology written by Mohammad Arif Kamal and published by . This book was released on 2021-04-20 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building construction technology is concerned with the technical performance of buildings, building materials, and building construction systems. Technological progress has introduced many innovations in the field of construction industry. The building construction technology covers a wide range of modern techniques and practices that encompass the latest developments in materials technology and their applications, design procedures, quantity surveying, structural analysis and design, the functioning of components and systems, procedures and details of building assembly; operating strategies and so on. The adoption of advanced construction technology requires an appropriate design, commitment from the whole project team, suitable procurement strategies, good quality control, appropriate training and careful commissioning. There is a difference between new and old traditional construction methods. The use of machinery and automation has made its way through the civil engineering and construction industry. Most of the building components such as columns, roofs and concrete blocks are available as prefabricated forms that increase the speed of construction process greatly. In the rapidly changing scenario of building sector, architects, engineers and builders should search for new construction technologies to adopt in future constructions that benefits like energy efficiency, resources and water conservation, improved indoor air quality, life cycle cost reduction, durability and low maintenance. Therefore, to attain these objectives, application and knowledge of latest advancements in various technologies are of prime concern. This book 'Advances in Building Construction Technology' contains six chapters which introduces various scientific methods and state-of-the-art building constriction technologies and systems that may be beneficial to architects, engineers, building scientists and construction industry professionals.

Download or read book Robot Oriented Design written by Thomas Bock and published by Cambridge University Press. This book was released on 2015-05-05 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cambridge Handbooks on Construction Robotics series focuses on the implementation of automation and robot technology to renew the construction industry and to arrest its declining productivity. The series is intended to give professionals, researchers, lecturers, and students basic conceptual and technical skills and implementation strategies to manage, research, or teach the implementation of advanced automation and robot-technology-based processes and technologies in construction. Currently, the implementation of modern developments in product structures (modularity and design for manufacturing), organizational strategies (just in time, just in sequence, and pulling production), and informational aspects (computer-aided design/manufacturing or computer-integrated manufacturing) are lagging because of the lack of modern integrated machine technology in construction. The Cambridge Handbooks on Construction Robotics books discuss progress in robot systems theory and demonstrate their integration using real systematic applications and projections for off-site as well as on-site building production. Robot-Oriented Design and Management introduces the design, innovation, and management methodologies that are key to the realization and implementation of the advanced concepts and technologies presented in the subsequent volumes. This book describes the efficient deployment of advanced construction and building technology. It is concerned with the coadaptation of construction products, processes, organization, and management, and with automated/robotic technology, so that the implementation of modern technology becomes easier and more efficient. It is also concerned with technology and innovation management methodologies and the generation of life cycle-oriented views related to the use of advanced technologies in construction.

Download or read book Construction 4 0 written by Anil Sawhney and published by Routledge. This book was released on 2020-02-06 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelled on the concept of Industry 4.0, the idea of Construction 4.0 is based on a confluence of trends and technologies that promise to reshape the way built environment assets are designed, constructed, and operated. With the pervasive use of Building Information Modelling (BIM), lean principles, digital technologies, and offsite construction, the industry is at the cusp of this transformation. The critical challenge is the fragmented state of teaching, research, and professional practice in the built environment sector. This handbook aims to overcome this fragmentation by describing Construction 4.0 in the context of its current state, emerging trends and technologies, and the people and process issues that surround the coming transformation. Construction 4.0 is a framework that is a confluence and convergence of the following broad themes discussed in this book: Industrial production (prefabrication, 3D printing and assembly, offsite manufacture) Cyber-physical systems (actuators, sensors, IoT, robots, cobots, drones) Digital and computing technologies (BIM, video and laser scanning, AI and cloud computing, big data and data analytics, reality capture, Blockchain, simulation, augmented reality, data standards and interoperability, and vertical and horizontal integration) The aim of this handbook is to describe the Construction 4.0 framework and consequently highlight the resultant processes and practices that allow us to plan, design, deliver, and operate built environment assets more effectively and efficiently by focusing on the physical-to-digital transformation and then digital-to-physical transformation. This book is essential reading for all built environment and AEC stakeholders who need to get to grips with the technological transformations currently shaping their industry, research, and teaching.

Download or read book Innovative Bridge Design Handbook written by Alessio Pipinato and published by Elsevier. This book was released on 2021-09-08 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Bridge Design Handbook: Construction, Rehabilitation, and Maintenance, Second Edition, brings together the essentials of bridge engineering across design, assessment, research and construction. Written by an international group of experts, each chapter is divided into two parts: the first covers design issues, while the second presents current research into the innovative design approaches used across the world. This new edition includes new topics such as foot bridges, new materials in bridge engineering and soil-foundation structure interaction. All chapters have been updated to include the latest concepts in design, construction, and maintenance to reduce project cost, increase structural safety, and maximize durability. Code and standard references have been updated. Completely revised and updated with the latest in bridge engineering and design Provides detailed design procedures for specific bridges with solved examples Presents structural analysis including numerical methods (FEM), dynamics, risk and reliability, and innovative structural typologies