Download or read book Control Surface Deflection Effects on the Innovative Control Effectors ICE 101 Design written by Gregory A. Addington and published by . This book was released on 2000 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: A static wind tunnel test of the Innovative Controls Effectors (ICE 101) conceptual aircraft configuration was conducted in the Air Force Research Laboratory's Vertical Wind Tunnel. This entry characterized the increments to the aerodynamic loading provided by the various control surfaces while using a more finely-resolved test matrix in angle of attack and sideslip than typically seen in wind tunnel testing. The purpose for obtaining these data was to determine the effect which control surface deflection had on critical state locations in preparation for the test of a second ICE model built with remotely- actuated control surfaces. (Critical states are discrete flight mechanical states where the aerodynamic response looses its analytic dependence on one or more state variables.) These data demonstrate that the aerodynamic increments are in many cases at minimum nonlinear functions of the surface deflection angle, and strongly suggest that some critical states do shift in angle of attack and/or sideslip with changing deflection angle.

Download or read book Application of Sliding Mode Methods to the Design of Reconfigurable Flight Control Systems written by Scott R. Wells and published by . This book was released on 2002 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Observer-based sliding mode control is investigated for application to aircraft reconfigurable flight control. An overview of reconfigurable flight control is given, including a review of the current state-of-the-art within the subdisciplines of fault detection parameter identification, adaptive control schemes, and dynamic control allocation. Of the adaptive control methods reviewed, sliding mode control (SMC) appears promising due its property of invariance to matched uncertainty. An overview of SMC is given and its properties are demonstrated. Sliding mode methods, however, are difficult to implement because unmodeled parasitic dynamics cause immediate and severe instability. This presents a challenge for all practical applications with limited bandwidth actuators. One method to deal with parasitic dynamics is the use of an asymptotic observer. Observer-based SMC is investigated, and a method for selecting observer gains is offered. An additional method for shaping the feedback loop using a filter is also developed. It is shown that this SMC prefilter is equivalent to a form of model reference hedging. A complete design procedure is given which takes advantage of the sliding mode boundary layer to recast the SMC as a linear control law. Frequency domain loop shaping is then used to design the sliding manifold. Finally, three aircraft applications are demonstrated. An F-18/HARV is used to demonstrate SISO and MIMO designs. The third application is a linear six degree-of-freedom advanced tailless fighter model. The observer-based SMC is seen to provide excellent tracking with superior robustness to parameter changes and actuator failures.

Download or read book The Control Handbook three volume set written by William S. Levine and published by CRC Press. This book was released on 2018-10-08 with total page 3379 pages. Available in PDF, EPUB and Kindle. Book excerpt: At publication, The Control Handbook immediately became the definitive resource that engineers working with modern control systems required. Among its many accolades, that first edition was cited by the AAP as the Best Engineering Handbook of 1996. Now, 15 years later, William Levine has once again compiled the most comprehensive and authoritative resource on control engineering. He has fully reorganized the text to reflect the technical advances achieved since the last edition and has expanded its contents to include the multidisciplinary perspective that is making control engineering a critical component in so many fields. Now expanded from one to three volumes, The Control Handbook, Second Edition brilliantly organizes cutting-edge contributions from more than 200 leading experts representing every corner of the globe. They cover everything from basic closed-loop systems to multi-agent adaptive systems and from the control of electric motors to the control of complex networks. Progressively organized, the three volume set includes: Control System Fundamentals Control System Applications Control System Advanced Methods Any practicing engineer, student, or researcher working in fields as diverse as electronics, aeronautics, or biomedicine will find this handbook to be a time-saving resource filled with invaluable formulas, models, methods, and innovative thinking. In fact, any physicist, biologist, mathematician, or researcher in any number of fields developing or improving products and systems will find the answers and ideas they need. As with the first edition, the new edition not only stands as a record of accomplishment in control engineering but provides researchers with the means to make further advances.

Download or read book Aircraft Control Allocation written by Wayne Durham and published by John Wiley & Sons. This book was released on 2017-01-17 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Control Allocation Wayne Durham, Virginia Polytechnic Institute and State University, USA Kenneth A. Bordignon, Embry-Riddle Aeronautical University, USA Roger Beck, Dynamic Concepts, Inc., USA An authoritative work on aircraft control allocation by its pioneers Aircraft Control Allocation addresses the problem of allocating supposed redundant flight controls. It provides introductory material on flight dynamics and control to provide the context, and then describes in detail the geometry of the problem. The book includes a large section on solution methods, including 'Banks' method', a previously unpublished procedure. Generalized inverses are also discussed at length. There is an introductory section on linear programming solutions, as well as an extensive and comprehensive appendix dedicated to linear programming formulations and solutions. Discrete-time, or frame-wise allocation, is presented, including rate-limiting, nonlinear data, and preferred solutions. Key features: Written by pioneers in the field of control allocation. Comprehensive explanation and discussion of the major control allocation solution methods. Extensive treatment of linear programming solutions to control allocation. A companion web site contains the code of a MATLAB/Simulink flight simulation with modules that incorporate all of the major solution methods. Includes examples based on actual aircraft. The book is a vital reference for researchers and practitioners working in aircraft control, as well as graduate students in aerospace engineering.

Download or read book Advances in Guidance Navigation and Control written by Liang Yan and published by Springer Nature. This book was released on 2023-02-10 with total page 7455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features the latest theoretical results and techniques in the field of guidance, navigation, and control (GNC) of vehicles and aircrafts. It covers a wide range of topics, including but not limited to, intelligent computing communication and control; new methods of navigation, estimation and tracking; control of multiple moving objects; manned and autonomous unmanned systems; guidance, navigation and control of miniature aircraft; and sensor systems for guidance, navigation and control etc. Presenting recent advances in the form of illustrations, tables, and text, it also provides detailed information of a number of the studies, to offer readers insights for their own research. In addition, the book addresses fundamental concepts and studies in the development of GNC, making it a valuable resource for both beginners and researchers wanting to further their understanding of guidance, navigation, and control.

Download or read book The Control Handbook written by William S. Levine and published by CRC Press. This book was released on 2018-10-08 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: At publication, The Control Handbook immediately became the definitive resource that engineers working with modern control systems required. Among its many accolades, that first edition was cited by the AAP as the Best Engineering Handbook of 1996. Now, 15 years later, William Levine has once again compiled the most comprehensive and authoritative resource on control engineering. He has fully reorganized the text to reflect the technical advances achieved since the last edition and has expanded its contents to include the multidisciplinary perspective that is making control engineering a critical component in so many fields. Now expanded from one to three volumes, The Control Handbook, Second Edition organizes cutting-edge contributions from more than 200 leading experts. The second volume, Control System Applications, includes 35 entirely new applications organized by subject area. Covering the design and use of control systems, this volume includes applications for: Automobiles, including PEM fuel cells Aerospace Industrial control of machines and processes Biomedical uses, including robotic surgery and drug discovery and development Electronics and communication networks Other applications are included in a section that reflects the multidisciplinary nature of control system work. These include applications for the construction of financial portfolios, earthquake response control for civil structures, quantum estimation and control, and the modeling and control of air conditioning and refrigeration systems. As with the first edition, the new edition not only stands as a record of accomplishment in control engineering but provides researchers with the means to make further advances. Progressively organized, the other two volumes in the set include: Control System Fundamentals Control System Advanced Methods

Download or read book Learning Based Adaptive Control written by Mouhacine Benosman and published by Butterworth-Heinemann. This book was released on 2016-08-02 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive control has been one of the main problems studied in control theory. The subject is well understood, yet it has a very active research frontier. This book focuses on a specific subclass of adaptive control, namely, learning-based adaptive control. As systems evolve during time or are exposed to unstructured environments, it is expected that some of their characteristics may change. This book offers a new perspective about how to deal with these variations. By merging together Model-Free and Model-Based learning algorithms, the author demonstrates, using a number of mechatronic examples, how the learning process can be shortened and optimal control performance can be reached and maintained. - Includes a good number of Mechatronics Examples of the techniques. - Compares and blends Model-free and Model-based learning algorithms. - Covers fundamental concepts, state-of-the-art research, necessary tools for modeling, and control.

Download or read book AVST Morphing Project Research Summaries in Fiscal Year 2001 written by Anna-Maria R. McGowan and published by . This book was released on 2002 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Innovations in Defence Support Systems 1 written by Anthony Finn and published by Springer Science & Business Media. This book was released on 2010-07-15 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in the area of Defence Support Systems are multi-disciplinary, cover a broad range of technologies, and could not possibly be covered within a single volume. This research book presents a sample of research as below: • On the Transition of Innovation and Technology in Defence • Inserting Innovations In-service • Classification of Battlefield Ground Vehicles based on the Acoustic Emissions • Convoy Movement Problem – An Optimization Perspective • Machine Vision Algorithms for Autonomous Aerial Refueling for UAVs using the USAF Refueling Boom Method • Motion Optimization Scheme for Cooperative Mobile Robots • An Automated Decision System for Landmine Detection and Classification The book is directed to the application engineers, research students, professors, decision makers and scientists & engineers working in defence and related areas.

Download or read book Smart Materials written by Mel Schwartz and published by CRC Press. This book was released on 2008-11-20 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores State-of-the-Art Work from the World's Foremost Scientists, Engineers, Educators, and Practitioners in the FieldWhy use smart materials?Since most smart materials do not add mass, engineers can endow structures with built-in responses to a myriad of contingencies. In their various forms, these materials can adapt to their environments by c

Download or read book Quantitative Feedback Theory written by Constantine H. Houpis and published by CRC Press. This book was released on 2018-10-03 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Quantitative Feedback Theory gained enormous popularity by successfully bridging the gap between theory and real-world engineering practice. Avoiding mathematical theorems, lemmas, proofs, and correlaries, it boiled down to the essential elements of quantitative feedback theory (QFT) necessary to readily analyze, develop, and implement robust control systems. Thoroughly updated and expanded, Quantitative Feedback Theory: Fundamentals and Applications, Second Edition continues to provide a platform for intelligent decision making and design based on knowledge of the characteristics and operating scenario of the plant. Beginning with the fundamentals, the authors build a background in analog and discrete-time multiple-input-single-output (MISO) and multiple-input-multiple-output (MIMO) feedback control systems along with the fundamentals of the QFT technique. The remainder of the book links these concepts to practical applications. Among the many enhancements to this edition are a new section on large wind turbine control system, four new chapters, and five new appendices. The new chapters cover non-diagonal compensator design for MIMO systems, QFT design involving Smith predictors for time delay systems with uncertainty, weighting matrices and control authority, and QFT design techniques applied to real-world industrial systems. Quantitative Feedback Theory: Fundamentals and Applications, Second Edition includes new and revised examples and end-of-chapter problems and offers a companion CD that supplies MIMO QFT computer-aided design (CAD) software. It is the perfect guide to effectively and intuitively implementing QFT control.

Download or read book Proceedings of the 6th China Aeronautical Science and Technology Conference written by Chinese Aeronautical Society and published by Springer Nature. This book was released on 2024-01-03 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the original peer-reviewed research papers presented at the 6th China Aeronautical Science and Technology Conference held in Wuzhen, Zhejiang Province, China, in September 2023. Topics covered include but are not limited to Navigation/Guidance and Control Technology, Aircraft Design and Overall Optimisation of Key Technologies, Aviation Testing Technology, Airborne Systems/Electromechanical Technology, Structural Design, Aerodynamics and Flight Mechanics, Advanced Aviation Materials and Manufacturing Technology, Advanced Aviation Propulsion Technology, and Civil Aviation Transportation. The papers presented here share the latest findings in aviation science and technology, making the book a valuable resource for researchers, engineers and students in related fields.

Download or read book Dynamic Inversion based Adaptive reconfigurable Control of the X 33 on Ascent written by David B. Doman and published by . This book was released on 2002 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: A quaternion-based attitude control system is developed for the X-33 in the ascent flight phase. A nonlinear control law commands body-axis rotation rates that align the angular velocity vector with an Euler axis defining the axis of rotation that will rotate the body-axis system into a desired-axis system. The magnitudes of the commanded body rates are determined by the magnitude of the rotation error. The commanded body rates form the input to a dynamic inversion-based adaptive/reconfigurable control law. The indirect adaptive control portion of the control law uses online system identification to estimate the current control effectiveness matrix to update a control allocation module. The control allocation nominally operates in a minimum deflection mode; however, if a fault is detected, it can operate in a null-space injection mode that excites and decorrelates the effectors without degrading the vehicle response to enable online system identification. The overall 5 stem is designed to provide fault and damage tolerance for the X-33 on ascent.

Download or read book Fault Tolerant Flight Control written by Christopher Edwards and published by Springer. This book was released on 2010-04-18 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.

Download or read book A Collection of Technical Papers written by and published by . This book was released on 1997 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Innovation in Flight written by Joseph R. Chambers and published by . This book was released on 2005 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Atmospheric Flight Mechanics Conference Held August 1997 at New Orleans Louisiana written by American Institute of Aeronautics and Astronautics and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 1997 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the proceedings of the Atmospheric Flight Mechanics Conference, which took place in New Orleans, August 1997. It focuses on the technical progress, issues and challenges associated with atmospheric flight. Technical papers address stability and control, flying qualities (including one session dedicated to pilot-induced oscillations), unsteady and vortex aerodynamics, system and parameter identification, aircraft flight dynamic re-entry and aero assist technologies, and reusable launch vehicles.