Download or read book Innovations in the Geometric Design of Traffic Interchanges and Networks for Urban Areas written by James MacGregor Smith and published by . This book was released on 1969 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Maintenance of Traffic for Innovative Geometric Design Work Zones written by Henry Brown and published by . This book was released on 2015 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently there are no guidelines within the Manual on Uniform Traffic Control Devices (MUTCD) on construction phasing and maintenance of traffic (MOT) for retrofit construction and maintenance projects involving innovative geometric designs. The research presented in this report addressed this gap in existing knowledge by investigating the state of the practice of construction phasing and MOT for several types of innovative geometric designs including the roundabout, single point urban interchange (SPUI), diverging diamond interchange (DDI), restricted-crossing left turn (RCUT), median U-turn (MUT), and displaced left turn (DLT). This report provides guidelines for transportation practitioners in developing construction phasing and MOT plans for innovative geometric designs. This report includes MOT Phasing Diagrams to assist in the development of MOT strategies for innovative designs. The MOT Phasing Diagrams were developed through a review of literature, survey, interviews with practitioners, and review of plans from innovative geometric design projects. These diagrams are provided as a tool to assist in improving work zone safety and mobility through construction of projects with innovative geometric designs. The aforementioned synthesis of existing knowledge documented existing practices for these types of designs.

Download or read book Comparison of Single Point Urban Interchange and Diverging Diamond Interchange Through Simulation written by Rawan Ramadhan and published by . This book was released on 2019 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1960, there were 74,431,800 vehicles registered in the United States. Looking at the most recent data currently available shows that in 2016 there were 268,799,083 registered vehicles in the United States. Roadway facilities constructed in the 1960s were not designed to handle vehicular traffic of these proportions. The ever increasing volumes of motor vehicle traffic at heavily traveled interchanges and intersections heighten the risk of single or multiple vehicle crashes particularly when they are not designed to manage high volumes. Traffic engineers from state and federal departments of transportation have responded to calls for safer roads and interchanges in some areas that have been identified as dangerous because of an increase in fatal and non-fatal motor vehicle crashes. In the road network the highway system and the local street system are related. According to the Federal Highway Administration, "the term interchange means the junction of two or more streets requiring partial or complete grade separation." Interchanges located in urban areas are utilized to facilitate traffic flow between arterial roadways and freeways on- and off-ramps. Congestion and safety are the two main objectives traffic engineers consider while remodeling an interchange design. Several types of renovated interchanges are normally considered to meet the growing population mobility needs. The Single Point Urban Interchange (SPUI) is one of the solutions has been considered since 1974 but it was flourished and implemented in the 1990s. The other innovative interchange solution appeared first in France in the mid-1970s known as Diverging Diamond Interchange (DDI). Likewise, the DDIs did not gain popularity back then until in the 2000s. The first DDI in the United States was constructed in 2009 in Springfield, Missouri.The main aim of this study is to compare the performance of traffic flow between SPUI and DDI based on existing traffic data for a peak hour retrofitting an existing Conventional Diamond Interchange (CDI). The analysis of the two interchange designs in conjunction with the existing design are used in the comparison study to identify which interchange design performs best among each other. The Measures of Effectiveness (MOEs) used in this study include queue delay, queue length, vehicle delay and stopped delay. This study obtain traffic turning movements and signal timing data from the Ohio Department of Transportation (ODOT). The turning movement counts (TMC) were taken from ODOT's Transportation Data Management System for the year 2017. VISSIM version 11 software was used for microscopic simulation. The optimum signal phasing for the three interchange designs were obtained from SYNCHRO 10 software based on the PM peak hour traffic data. The virtual interchange network design geometry in both software programs were almost identical. Several assumptions were made to stay consistent as much as possible while comparing the three designs since they have completely different geometric layouts. For example, the existing CDI data included the through movements from off-ramps to on-ramps. Since the two alternative designs (SPUI and DDI) exclude the through movements from off-ramps to on-ramps, their data were added to the right turn movements. Moreover, the speed limit was set to be in the range of 30 mph while driving in the interchange to meet all three design specifications.The analysis of results show that there are significant advantages and disadvantages associated with each design (CDI, SPUI and DDI). During implementation, various factors such as cost, efficiency, safety, delay, etc., need to be considered when attempting to select the best design, which would be the most appropriate method as these may vary from situation to situation. However, in the current study, a DDI performed best, followed by a SPUI, and then CDI was last. Moreover, CDI with its signal timing optimized very highly improved all MOEs considered when compared with the CDI with existing signal timing.

Download or read book Geometric Design Practices for European Roads written by James O. Brewer and published by DIANE Publishing. This book was released on 2001 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Guide for the Geometric Layout of Interchanges written by Michigan. State Highway Department and published by . This book was released on 1960 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Roundabouts written by Lee August Rodegerdts and published by Transportation Research Board. This book was released on 2010 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 672: Roundabouts: An Informational Guide - Second Edition explores the planning, design, construction, maintenance, and operation of roundabouts. The report also addresses issues that may be useful in helping to explain the trade-offs associated with roundabouts. This report updates the U.S. Federal Highway Administration's Roundabouts: An Informational Guide, based on experience gained in the United States since that guide was published in 2000.

Download or read book Geometric Design Criteria and Traffic Operational Experience on High Speed Freeways and Interchanges written by A. Taragin and published by . This book was released on 1972 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geometric Design of Roads Handbook written by Keith Wolhuter and published by CRC Press. This book was released on 2015-10-05 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the Art and Science of Geometric DesignThe Geometric Design of Roads Handbook covers the design of the visible elements of the road-its horizontal and vertical alignments, the cross-section, intersections, and interchanges. Good practice allows the smooth and safe flow of traffic as well as easy maintenance. Geometric design is covered in d

Download or read book The Geometric Design of Modern Highways written by John Hugh Jones and published by . This book was released on 1961 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Traffic Control Systems Handbook written by and published by . This book was released on 1976 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook, which was developed in recognition of the need for the compilation and dissemination of information on advanced traffic control systems, presents the basic principles for the planning, design, and implementation of such systems for urban streets and freeways. The presentation concept and organization of this handbook is developed from the viewpoint of systems engineering. Traffic control studies are described, and traffic control and surveillance concepts are reviewed. Hardware components are outlined, and computer concepts, and communication concepts are stated. Local and central controllers are described, as well as display, television and driver information systems. Available systems technology and candidate system definition, evaluation and implementation are also covered. The management of traffic control systems is discussed.

Download or read book Recent Geometric Design Research for Improved Safety and Operations written by Kay Fitzpatrick and published by . This book was released on 2001 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 299: Recent Geometric Design Research for Improved Safety and Operations reviews and summarizes selected geometric design research published during the 1990s, particularly research with improved safety and operations implication.

Download or read book Interchange Design written by Jack E. Leisch and published by . This book was released on 1962 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Freeway Geometric Design for Active Traffic Management in Europe written by U. S. Department Transportation and published by CreateSpace. This book was released on 2012-11-06 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continued growth in travel on congested urban freeway corridors exceeds the ability of agencies to provide sufficient solutions and alternatives based on traditional roadway expansion and improvement projects. Several countries are implementing managed motorway concepts to improve motorway capacity without acquiring more land and building large-scale infrastructure projects. The Federal Highway Administration, American Association of State Highway and Transportation Officials, and National Cooperative Highway Research Program sponsored a scanning study of England, Germany, the Netherlands, and Spain to examine the use of innovative geometric design practices and techniques to improve the operational performance of congested freeway facilities without compromising safety. Managed motorways are a combination of active or dynamically managed operational regimes, specific designs of infrastructure, and technology solutions. The concept uses a range of traffic management measures to actively monitor the motorway and dynamically control speeds, add capacity, and inform road users of conditions on the network with the objective to optimize traffic and safety performance. Examples include shoulder running, variable mandatory speed limits, lane control signals, and driver information using variable message signs. Managed motorways increase journey reliability and throughput of a motorway by speed management and increase capacity by shoulder running.

Download or read book Urban Road Design written by Austroads Incorporated. and published by . This book was released on 2002 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geometric Design Criteria and Traffic Operational Experience on High Speed Freeways and Interchanges written by A. Taragin and published by . This book was released on 1972 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Roadway Lighting Design Guide written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2005 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide replaces the 1984 publication entitled An Informational Guide for Roadway Lighting. It has been revised and brought up to date to reflect current practices in roadway lighting. The guide provides a general overview of lighting systems from the point of view of the transportation departments and recommends minimum levels of quality. The guide incorporates the illuminance and luminance design methods, but does not include the small target visibility (STV) method.

Download or read book The Handbook of Road Safety Measures written by Rune Elvik and published by Emerald Group Publishing. This book was released on 2009-10-14 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains summaries of the knowledge regarding the effects of 128 road safety measures. This title covers various areas of road safety including: traffic control; vehicle inspection; driver training; publicity campaigns; police enforcement; and, general policy instruments. It also covers topics such as post-accident care, and speed cameras.