Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Laser Cladding of Metals written by Pasquale Cavaliere and published by Springer Nature. This book was released on 2020-11-05 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser cladding is an additive manufacturing technology capable of producing coatings due to the surface fusion of metals. The selected powder is fed into a focused laser beam to be melted and deposited as coating. This allows to apply material in a selected way onto those required sections of complex components. The process main properties are the production of a perfect metallurgically bonded and fully dense coatings; the minimal heat affected zone and low dilution between the substrate and filler material resulting in functional coatings that perform at reduced thickness, so fewer layers are applied; fine, homogeneous microstructure resulting from the rapid solidification rate that promotes wear resistance of carbide coatings; near net-shape weld build-up requires little finishing effort; extended weldability of sensitive materials like carbon-rich steels or nickel-based superalloys that are difficult or even impossible to weld using conventional welding processes; post-weld heat treatment is often eliminated as the small heat affected zone minimizes component stress; excellent process stability and reproducibility because it is numerical controlled welding process. The typical applications are the dimensional restoration; the wear and corrosion protection; additive manufacturing. The wide range of materials that can be deposited and its suitability for treating small areas make laser cladding particularly appropriate to tailor surface properties to local service requirements and it opens up a new perspective for surface engineered materials. The main key aspect to be scientifically and technologically explored are the type of laser; the powders properties; the processing parameters; the consequent microstructural and mechanical properties of the processed material; the capability of fabrication of prototypes to rapid tooling and rapid manufacturing. Distills critical concepts, methods, and applications from leading full-length chapters, along with the authors’s own deep understanding of the material taught, into a concise yet rigorous graduate and advanced undergraduate text; Reinforces concepts covered with detailed solutions to illuminating and challenging industrial applications; Discusses current and future applications of laser cladding in additive manufacturing.

Download or read book Advances in Transport Processes written by Arun S. Mujumdar and published by Elsevier Science & Technology. This book was released on 1992 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the explosive growth of the technical literature worldwide, it is important for the modern engineer or applied scientist to be able to keep abreast of scientific advances without having to spend an inordinate amount of time and effort locating the pertinent literature and digesting it into a usable form. It is the prime objective of this series, now continued by Elsevier Science Publishers, to present authoritative, critical and timely reviews of both fundamental and applied topics in fluid mechanics, and heat and mass transfer, so that the reader can gain an understanding of the present status with minimal expenditure of time and effort. The subject matter covered by the series is interdisciplinary in nature and will serve the needs of the practising engineer as well as the academic or industrial researcher. The series also has a cross-disciplinary objective, so that advances made in one discipline can be readily assimilated and used by researchers in other disciplines; many seemingly diverse problems have a common scientific or engineering basis at the fundamental level.The series should be of interest to engineers and scientists engaged in disciplines ranging from chemical, mechanical, electrochemical, biochemical, biological, materials and metallurgical research to applied mathematics, civil and aerospace engineering.

Download or read book CORCON MOD2 written by Randall K. Cole and published by . This book was released on 1984 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Laser Cladding written by Ehsan Toyserkani and published by CRC Press. This book was released on 2004-08-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Capitalizing on the rapid growth and reduced costs of laser systems, laser cladding is gaining momentum, and in some instances replacing conventional techniques of depositing thin films because it can accommodate a great variety of materials, achieve uniform thickness and precise widths of layers, and provide improved resistance to wear and corrosion in the final product. Laser cladding technology also offers a revolutionary layered manufacturing and prototyping technique that can fabricate complex components without intermediate steps. Laser Cladding reviews the parameters, techniques and equipment, process modeling and control, and the physical metallurgy of alloying and solidification during laser cladding. The authors clarify the interconnections laser cladding has with CAD/CAM design; automation and robotics; sensors, feedback, and control; physics, material science, heat transfer, fluid dynamics, and powder metallurgy to promote further development and improved process quality of this growing technology. As the first book entirely dedicated to the topic, it also offers a history of its development and a guide to applications and market opportunities. While a considerable part of Laser Cladding is dedicated to industrial applications, this volume brings together valuable information illustrated with real case studies based on the authors' vast experience, and research and analysis in the field to provide a timely source for both academia and industry.

Download or read book Energy Materials Coordinating Committe EMaCC Fiscal Year 1997 Annual Technical Report written by and published by DIANE Publishing. This book was released on with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling of Casting Welding and Advanced Solidification Processes V written by Michel Rappaz and published by Minerals, Metals, & Materials Society. This book was released on 1991 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Laser Based Additive Manufacturing of Metal Parts written by Linkan Bian and published by CRC Press. This book was released on 2017-08-09 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-Based Additive Manufacturing (LBAM) technologies, hailed by some as the "third industrial revolution," can increase product performance, while reducing time-to-market and manufacturing costs. This book is a comprehensive look at new technologies in LBAM of metal parts, covering topics such as mechanical properties, microstructural features, thermal behavior and solidification, process parameters, optimization and control, uncertainty quantification, and more. The book is aimed at addressing the needs of a diverse cross-section of engineers and professionals.

Download or read book Lasers in Materials Processing written by Alan Gomersall and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermo Mechanical Modeling of Additive Manufacturing written by Michael Gouge and published by Butterworth-Heinemann. This book was released on 2017-08-03 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-mechanical Modeling of Additive Manufacturing provides the background, methodology and description of modeling techniques to enable the reader to perform their own accurate and reliable simulations of any additive process. Part I provides an in depth introduction to the fundamentals of additive manufacturing modeling, a description of adaptive mesh strategies, a thorough description of thermal losses and a discussion of residual stress and distortion. Part II applies the engineering fundamentals to direct energy deposition processes including laser cladding, LENS builds, large electron beam parts and an exploration of residual stress and deformation mitigation strategies. Part III concerns the thermo-mechanical modeling of powder bed processes with a description of the heat input model, classical thermo-mechanical modeling, and part scale modeling. The book serves as an essential reference for engineers and technicians in both industry and academia, performing both research and full-scale production. Additive manufacturing processes are revolutionizing production throughout industry. These technologies enable the cost-effective manufacture of small lot parts, rapid repair of damaged components and construction of previously impossible-to-produce geometries. However, the large thermal gradients inherent in these processes incur large residual stresses and mechanical distortion, which can push the finished component out of engineering tolerance. Costly trial-and-error methods are commonly used for failure mitigation. Finite element modeling provides a compelling alternative, allowing for the prediction of residual stresses and distortion, and thus a tool to investigate methods of failure mitigation prior to building. - Provides understanding of important components in the finite element modeling of additive manufacturing processes necessary to obtain accurate results - Offers a deeper understanding of how the thermal gradients inherent in additive manufacturing induce distortion and residual stresses, and how to mitigate these undesirable phenomena - Includes a set of strategies for the modeler to improve computational efficiency when simulating various additive manufacturing processes - Serves as an essential reference for engineers and technicians in both industry and academia

Download or read book Fission Product Processes In Reactor Accidents written by J. T. Rogers and published by CRC Press. This book was released on 2020-12-17 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Three Mile Island and Chernobyl nuclear incidents emphasized the need for the world-wide nuclear community to cooperate further and exchange the results of research in this field in the most open and effective manner. Recognizing the roles of heat and mass transfer in all aspects of fission-product behavior in sever reactor accidents, the Executive Committee of the International Centre for Heat and Mass Transfer organized a Seminar on Fission Product Transport Processes in Reactor Accidents. This book contains the eleven of the lectures and all the papers presented at the seminar along with four invited papers that were not presented and a summary of the closing session.

Download or read book Energy Materials Coordinating Committe EMaCC Fiscal Year 1996 Annual Technical Report written by and published by DIANE Publishing. This book was released on with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2nd International Conference on Thermal Process Modelling and Computer Simulation written by Sabine Denis and published by . This book was released on 2004 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis of Station Blackout Accidents for the Bellefonte Pressurized Water Reactor written by R. D. Gasser and published by . This book was released on 1986 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources

Download or read book Proceedings written by John R. Coombe and published by . This book was released on 1983 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: